Eksploderet visning tondeuse snapper SNAPPER enxt22875ex-snapper

Oplev den komplette eksploderede visning tondeuse snapper SNAPPER enxt22875ex-snapper – en uundværlig guide til at identificere reservedele. Vores præsentation hjælper dig med at forstå hver komponent i din tondeuse snapper. Find hurtigt delene til din tondeuse snapper SNAPPER enxt22875ex-snapper.

Reparationsassistent Powered by ChatGPT

Reservedelsliste

2 BOLT, 1/4-20 x 1-3/4” Round Head Square Neck, GR 2, YZ
2 BOLT, 1/4-20 x 1-3/4” Round Head Square Neck, GR 2, YZ
Position: 1
1 GUIDE, Rope, 1/4-20 x 1.8” (Euro Model 7800722)
1 GUIDE, Rope, 1/4-20 x 1.8” (Euro Model 7800722)
Position: 1
3 SCREW, #10-24 x 5/8” Hex Washer Self-Tap, GR 5 BZ
3 SCREW, #10-24 x 5/8” Hex Washer Self-Tap, GR 5 BZ
Position: 1
4 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
4 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
Position: 1
3 SCREW, 3/8-16 x 1-1/4” Hex Washer Self-Tap
3 SCREW, 3/8-16 x 1-1/4” Hex Washer Self-Tap
Position: 1
1 TRANSMISSION, Variable Speed, Rear Wheel Drive
1 TRANSMISSION, Variable Speed, Rear Wheel Drive
Position: 1
1 DECAL, Front Shroud, Snapper Logo
1 DECAL, Front Shroud, Snapper Logo
Position: 1
4 WASHER, 5/16” Internal Tooth Lock
4 WASHER, 5/16” Internal Tooth Lock
Position: 2
4 SCREW, #10-16 x 3/4” Pan Head Self-Tap Combo, BZ
4 SCREW, #10-16 x 3/4” Pan Head Self-Tap Combo, BZ
Position: 2
2 HOLDER, Bearing, Rear Wheel Drive
2 HOLDER, Bearing, Rear Wheel Drive
Position: 2
2 BELT GUIDE, Engine
2 BELT GUIDE, Engine
Position: 2
1 PULLEY, Transmission Variable Speed, LC WBM
1 PULLEY, Transmission Variable Speed, LC WBM
Position: 2
1 DECAL, Front Shroud, NXT Logo
1 DECAL, Front Shroud, NXT Logo
Position: 2
2 NUT, 5/16-18 Large Flange Center Lock
2 NUT, 5/16-18 Large Flange Center Lock
Position: 3
3 NUT, #10-24 Speed Retainer w/extrusion
3 NUT, #10-24 Speed Retainer w/extrusion
Position: 3
2 BALL BEARING, Axle
2 BALL BEARING, Axle
Position: 3
1 PULLEY, Engine
1 PULLEY, Engine
Position: 3
1 NUT, 3/8-16 Hex Center Lock, YZ
1 NUT, 3/8-16 Hex Center Lock, YZ
Position: 3
1 DECAL, Handle, Domed Turtle
1 DECAL, Handle, Domed Turtle
Position: 3
2 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR
2 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR
Position: 4
2 LEVER, Drive Control
2 LEVER, Drive Control
Position: 4
1 COVER, Mulching
1 COVER, Mulching
Position: 4
4 NUT, 5/16-18 Hex Flange Lock, GR 5, YZ (Was 7091601)
4 NUT, 5/16-18 Hex Flange Lock, GR 5, YZ (Was 7091601)
Position: 4
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
Position: 4
1 BELT, 3L, Traction Drive, 22” WBM, RWD (3L Section, 33.83” Effective Length)
1 BELT, 3L, Traction Drive, 22” WBM, RWD (3L Section, 33.83” Effective Length)
Position: 4
1 DECAL, Handle, React Drive
1 DECAL, Handle, React Drive
Position: 4
2 BOLT, 5/16-18 x 3/4” Round Head Short Square Neck, GR 5, YZ (Was 1931333)
2 BOLT, 5/16-18 x 3/4” Round Head Short Square Neck, GR 5, YZ (Was 1931333)
Position: 5
2 LEVER, OPC, Control
2 LEVER, OPC, Control
Position: 5
1 CHUTE, Side Discharge, 22” WBM
1 CHUTE, Side Discharge, 22” WBM
Position: 5
2 PIN, Axle
2 PIN, Axle
Position: 5
1 KEY, #HP-506 Hi-Pro
1 KEY, #HP-506 Hi-Pro
Position: 5
1 BELT GUIDE, Transmission
1 BELT GUIDE, Transmission
Position: 5
1 DECAL, Start NXT
1 DECAL, Start NXT
Position: 5
2 BOLT, 5/16-18 x 1-3/4” Round Head Square Neck Carriage
2 BOLT, 5/16-18 x 1-3/4” Round Head Square Neck Carriage
Position: 6
1 CAM, Drive, LH
1 CAM, Drive, LH
Position: 6
1 COVER, Front, Push/Rear Wheel Drive
1 COVER, Front, Push/Rear Wheel Drive
Position: 6
2 SHIELD, Dust, 21” WBM, RD
2 SHIELD, Dust, 21” WBM, RD
Position: 6
1 BLADE HUB, 21” WBM, Rear Drive, 2 Position
1 BLADE HUB, 21” WBM, Rear Drive, 2 Position
Position: 6
2 SCREW, #10-16 x 3/4” Pan Head Self-Tap, Combo
2 SCREW, #10-16 x 3/4” Pan Head Self-Tap, Combo
Position: 6
1 DECAL, Stop NXT
1 DECAL, Stop NXT
Position: 6
2 NUT, 1/4-20 Hex Flange (Esna), YZ
2 NUT, 1/4-20 Hex Flange (Esna), YZ
Position: 7
1 CAM, Drive, RH
1 CAM, Drive, RH
Position: 7
3 PUSHNUT, 1/4”
3 PUSHNUT, 1/4”
Position: 7
2 RETAINING RING, 3.92 EXT. (Waldes #5133-50 or equiv.)
2 RETAINING RING, 3.92 EXT. (Waldes #5133-50 or equiv.)
Position: 7
1 DECAL, Customer Service, MY08, Snapper
1 DECAL, Customer Service, MY08, Snapper
Position: 7
4 WIRE TIE, 11 Inch Standard Black Nylon
4 WIRE TIE, 11 Inch Standard Black Nylon
Position: 8
1 CONTROL PANEL, Top, MY Mower
1 CONTROL PANEL, Top, MY Mower
Position: 8
1 ROD, Pivot
1 ROD, Pivot
Position: 8
2 GEAR, Pinion
2 GEAR, Pinion
Position: 8
1 WASHER, Cone
1 WASHER, Cone
Position: 8
1 DECAL, Danger, Cut Finger
1 DECAL, Danger, Cut Finger
Position: 8
1 BATTERY, 1.3A/Hr
1 BATTERY, 1.3A/Hr
Position: 9
1 CONTROL PANEL, Bottom, MY Mower
1 CONTROL PANEL, Bottom, MY Mower
Position: 9
6 SCREW, 1/4-20 x .550 Self-Tap (Torx)
6 SCREW, 1/4-20 x .550 Self-Tap (Torx)
Position: 9
2 RETAINING RING, .452-.463 ID (Waldes #5100-50 or equiv.)
2 RETAINING RING, .452-.463 ID (Waldes #5100-50 or equiv.)
Position: 9
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
Position: 9
1 DECAL, CPSC, French/English
1 DECAL, CPSC, French/English
Position: 9
4 KNOB, Handle, 5-Prong (5/16-18 internal threads)
4 KNOB, Handle, 5-Prong (5/16-18 internal threads)
Position: 10
1 PANEL, Bottom Control, WBM, RH
1 PANEL, Bottom Control, WBM, RH
Position: 10
1 SPRING, Torsion, Chute
1 SPRING, Torsion, Chute
Position: 10
2 ASSEMBLY, Wheel, 9 x 2, Snapper Tread w/Ext Gear (includes ball bearings #7101380, gear
2 ASSEMBLY, Wheel, 9 x 2, Snapper Tread w/Ext Gear (includes ball bearings #7101380, gear
Position: 10
1 DECAL, Arrestor, Spark
1 DECAL, Arrestor, Spark
Position: 10
1 METER, Service Indicator
1 METER, Service Indicator
Position: 11
1 PANEL, Bottom Control, WBM, LH
1 PANEL, Bottom Control, WBM, LH
Position: 11
4 WASHER, 1” OD x .387 ID, Flat
4 WASHER, 1” OD x .387 ID, Flat
Position: 11
1 GRASS BAG, 22” Rear Discharge
1 GRASS BAG, 22” Rear Discharge
Position: 11
1 DECAL, Warning, Rear Discharge Door
1 DECAL, Warning, Rear Discharge Door
Position: 11
1 HANDLE, Connecting, 21”/22” WBM (Euro Model 7800722)
1 HANDLE, Connecting, 21”/22” WBM (Euro Model 7800722)
Position: 12
1 ACCESS DOOR, Battery Control Panel, WBM
1 ACCESS DOOR, Battery Control Panel, WBM
Position: 12
1 SWITCH, Rotary, EHOC
1 SWITCH, Rotary, EHOC
Position: 12
2 BOLT, 1/4-20 x 1-1/2” Shoulder
2 BOLT, 1/4-20 x 1-1/2” Shoulder
Position: 12
4 NUT, 3/8-16 Hex Center Lock, YZ
4 NUT, 3/8-16 Hex Center Lock, YZ
Position: 12
1 DECAL, Key Switch
1 DECAL, Key Switch
Position: 12
1 HANDLE, Lower, WBM, RD (Euro Model 7800722)
1 HANDLE, Lower, WBM, RD (Euro Model 7800722)
Position: 13
1 PANEL, Access, Maintenance Reminder
1 PANEL, Access, Maintenance Reminder
Position: 13
4 BOLT, 1/4-20 x 3/4” Hex Flange Lock, GR
4 BOLT, 1/4-20 x 3/4” Hex Flange Lock, GR
Position: 13
4 HUBCAP, 8” & 9” Wheel Spoked-Snapper Cool Gray
4 HUBCAP, 8” & 9” Wheel Spoked-Snapper Cool Gray
Position: 13
1 DECAL, French/English, WB Safety
1 DECAL, French/English, WB Safety
Position: 13
1 ASSEMBLY, Drive Control (MY 2010)
1 ASSEMBLY, Drive Control (MY 2010)
Position: 14
1 CABLE, OPC, NXT
1 CABLE, OPC, NXT
Position: 14
1 DEBRIS SHIELD, Front
1 DEBRIS SHIELD, Front
Position: 14
1 GRIP, Height-Of-Cut
1 GRIP, Height-Of-Cut
Position: 14
1 DECAL, Battery
1 DECAL, Battery
Position: 14
1 CHARGER, Battery, 120V AC, Output 14V DC, 260mA
1 CHARGER, Battery, 120V AC, Output 14V DC, 260mA
Position: 15
1 CHARGER, Battery, 230V AC, 50 Hz, Output 12V DC, 750mA (Euro) (Euro Model 7800722)
1 CHARGER, Battery, 230V AC, 50 Hz, Output 12V DC, 750mA (Euro) (Euro Model 7800722)
Position: 15
1 HOUSING, Bridge Disconnect
1 HOUSING, Bridge Disconnect
Position: 15
1 ASSEMBLY, Drive Control, EHOC, (MY2011) Walk
1 ASSEMBLY, Drive Control, EHOC, (MY2011) Walk
Position: 15
1 GUARD, Rear 22”
1 GUARD, Rear 22”
Position: 15
1 LEVER, Spring, Height-Of-Cut
1 LEVER, Spring, Height-Of-Cut
Position: 15
1 DECAL, Electric Height-of-Cut
1 DECAL, Electric Height-of-Cut
Position: 15
1 HARNESS, Electric Start, NXT
1 HARNESS, Electric Start, NXT
Position: 16
1 CONTROL PANEL, Top
1 CONTROL PANEL, Top
Position: 16
3 NUT, 1/4-20 Hex Flange Lock
3 NUT, 1/4-20 Hex Flange Lock
Position: 16
6 SCREW, 1/4-20 x .550 Pan Head Self-Tap (Torx)
6 SCREW, 1/4-20 x .550 Pan Head Self-Tap (Torx)
Position: 16
1 DECAL, Warning, Euro, Multi-Panel
1 DECAL, Warning, Euro, Multi-Panel
Position: 16
1 SWITCH, Push Button Start
1 SWITCH, Push Button Start
Position: 17
1 HARNESS, Electric Start, NXT, w/E-HOC
1 HARNESS, Electric Start, NXT, w/E-HOC
Position: 17
1 ASSEMBLY, Door, 22” WBM
1 ASSEMBLY, Door, 22” WBM
Position: 17
2 SHOULDER BOLT, #10-24
2 SHOULDER BOLT, #10-24
Position: 17
1 SPRING, Tension, Drive Control
1 SPRING, Tension, Drive Control
Position: 18
3 BOLT RETAINER, 1/4”
3 BOLT RETAINER, 1/4”
Position: 18
2 WASHER, .219 x .500 x .049 Flat
2 WASHER, .219 x .500 x .049 Flat
Position: 18
1 CABLE, Control, NXT (Was 7103770)
1 CABLE, Control, NXT (Was 7103770)
Position: 19
2 SCREW, #10-24 x 5/8” Hex Washer Face Self-Tap, GR
2 SCREW, #10-24 x 5/8” Hex Washer Face Self-Tap, GR
Position: 19
2 NUT, #10-24 UNC-2B Nyloc
2 NUT, #10-24 UNC-2B Nyloc
Position: 19
4 SCREW, #10-16 x 2” Hi-Lo Cross Pan Head
4 SCREW, #10-16 x 2” Hi-Lo Cross Pan Head
Position: 20
2 NUT, #10-24 Retainer Speed w/extrusion
2 NUT, #10-24 Retainer Speed w/extrusion
Position: 20
1 PLUG, Mulching, 22” Deck
1 PLUG, Mulching, 22” Deck
Position: 21
2 SCREW, Round Washer Head Torx, Hi-Lo
2 SCREW, Round Washer Head Torx, Hi-Lo
Position: 22
2 ASSEMBLY, Wheel, 8 x 2 Idle, Snapper Tread Snapper Charcoal Gray (includes two ball
2 ASSEMBLY, Wheel, 8 x 2 Idle, Snapper Tread Snapper Charcoal Gray (includes two ball
Position: 22
3 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, GR
3 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, GR
Position: 23
1 WELDMENT, Front Axle
1 WELDMENT, Front Axle
Position: 23
4 U-NUT, 1/4-20
4 U-NUT, 1/4-20
Position: 24
4 BUSHING, Bearing, RWD
4 BUSHING, Bearing, RWD
Position: 24
1 BAFFLE, Rear, Rear Wheel Drive WBM
1 BAFFLE, Rear, Rear Wheel Drive WBM
Position: 25
1 SHOULDER BOLT, 3/8 Dia. (1/4-20 threads) (used on 7800752 & 7800782 models)
1 SHOULDER BOLT, 3/8 Dia. (1/4-20 threads) (used on 7800752 & 7800782 models)
Position: 25
1 BELT COVER, Rear Drive (Was 7103294)
1 BELT COVER, Rear Drive (Was 7103294)
Position: 26
1 PIN, 1/4 x 1.25” Clevis (used on 7800752 & 7800782 models)
1 PIN, 1/4 x 1.25” Clevis (used on 7800752 & 7800782 models)
Position: 26
2 NUT, 3/16” Push
2 NUT, 3/16” Push
Position: 27
1 PIN, 1/4” Cotter, Self-Locking (used on 7800752 & 7800782 models)
1 PIN, 1/4” Cotter, Self-Locking (used on 7800752 & 7800782 models)
Position: 27
1 BAFFLE, Front
1 BAFFLE, Front
Position: 28
1 HINGE, Rear Discharge Door
1 HINGE, Rear Discharge Door
Position: 29
1 BRACKET, Electric Motor (used on 7800752 & 7800782 models)
1 BRACKET, Electric Motor (used on 7800752 & 7800782 models)
Position: 29
1 SPRING, Torsion, Rear Door
1 SPRING, Torsion, Rear Door
Position: 30
2 SPACER, Shaft, 1/2”
2 SPACER, Shaft, 1/2”
Position: 30
1 ROD, Pivot, Rear Door
1 ROD, Pivot, Rear Door
Position: 31
1 PLATE, Spacer, EHOC
1 PLATE, Spacer, EHOC
Position: 31
1 DOOR, Rear Discharge (Was 7103291)
1 DOOR, Rear Discharge (Was 7103291)
Position: 32
2 SCREW, 1/4-20 x 3/4" Pan Head Self-Tap (Torx)
2 SCREW, 1/4-20 x 3/4" Pan Head Self-Tap (Torx)
Position: 32
1 WASHER, Hose
1 WASHER, Hose
Position: 33
1 ADAPTOR, Washout Port, WBM
1 ADAPTOR, Washout Port, WBM
Position: 34
1 COUPLING, Hose
1 COUPLING, Hose
Position: 35
1 WASHER, 5/8” Internal Tooth Lock YZ (Was 7090880)
1 WASHER, 5/8” Internal Tooth Lock YZ (Was 7090880)
Position: 36
1 NUT, 5/8-11, NC-2B Black Hex Jam
1 NUT, 5/8-11, NC-2B Black Hex Jam
Position: 37
Clermont-Ferrand Cedex
Clermont-Ferrand Cedex
Position: 63014
NXT22875E
NXT22875E
Position: 7800580
NXT22875EFC
NXT22875EFC
Position: 7800696
ENXT22875E
ENXT22875E
Position: 7800722
NXT22875EE
NXT22875EE
Position: 7800752
NXT22875EEFC
NXT22875EEFC
Position: 7800782