Reparatur-Assistent
Powered by ChatGPT
Ersatzteilliste
Decal, Speed Control (511, 514-516, 522)
Position: 1
Engine Ball Weldment (511, 513-516) / Ball-Blade Brake/Clutch (522)
Position: 1
Bag-ConsumerBlack
Position: 1
V-Belt 3L Section (511, 514-516)
Position: 1
Key with Cap (515)
Position: 1
Bracket- Spring Retainer
Position: 1
Decal, Turtle & Rabbit (511, 514-516, 522)
Position: 2
Washer-Flat-Steel .32 x .44 x .44 x .56 (511, 513-516) / Washer-Flat-Steel .32 x .44 x .44 x .56 (522)
Position: 2
Bagger Frame
Position: 2
Bolt-Hex .44-14 x 1.25 Grade 5 (511, 514-516)
Position: 2
Cap-Ignition Switch (515)
Position: 2
PULLEY- Blade Brake/Clutch
Position: 2
Label, Bagger 21"
Position: 3
Bushing-Flange .325 x .688 x .560 (511, 513-516) / Bushing-Flange .325 x .688 x .560 (522)
Position: 3
Door-Catcher Plate
Position: 3
Idler-Flat 1.75 x .47 (511, 514-516)
Position: 3
Nut, Panel .625-32 (515)
Position: 3
Spring-Tension .1278 x .735 x 4.71
Position: 3
Decal, CPSC Danger
Position: 4
Cap, Vinyl .25 I.D. (511, 513-516) / Cap, Vinyl .25 I.D. (522)
Position: 4
Button Bumper
Position: 4
Nut-Locking-Center .31-18 (511, 514-516)
Position: 4
Washer-Locking Internal .625 x .045 (515)
Position: 4
Screw-Socket Head-Special .375-24 x 1.50
Position: 4
Decal, Ariens Deck (511, 513-516)
Position: 5
Decal, Ariens Blade Brake/Clutch (522)
Position: 5
Traction Ball (511, 514-516, 522)
Position: 5
Bumper
Position: 5
Washer-Flat-Steel .323 x .625 x .062 (511, 514-516)
Position: 5
Switch, Key Electric Start-LM (515)
Position: 5
Washer-Wave .88 x 1.31 x .125
Position: 5
Decal, Round Ariens Recoil, Robin (511)
Position: 6
Decal, Ariens Recoil, Briggs & Stratton (513-522)
Position: 6
Handlebar
Position: 6
Screw-Tapping 12-24 x .50 Hex Washer Head (513-516, 522)
Position: 6
Spacer .52 x .45 x .34 (511, 514-516)
Position: 6
Harness, Wire LM-Electric (515)
Position: 6
Decal, 6.0 H.P. OHV Robin (511)
Position: 7
Decal, Ariens, Briggs & Stratton (513-516, 522)
Position: 7
Engine Control Cable (513-516, 522)
Position: 7
Engine Control Cable (511)
Position: 7
Screw-Tapping 10-24 x .38 Pan Head
Position: 7
Idler Arm (511, 514-516)
Position: 7
Battery (515)
Position: 7
Engine, Briggs & Stratton Intek OHV 6.5HP Recoil
Position: 7
Decal, Drive Cover Self Propelled (514-516, 522)
Position: 8
Decal, Drive Cover Self Propelled Professional (511)
Position: 8
Decal, Blade Brake/Clutch Drive Cover (522)
Position: 8
Switch-Cable Anchor (515)
Position: 8
Plate-Catcher (513-516, 522)
Position: 8
Bushing-Flange .325 x .501 x .250 x 1.120 (511, 514-516)
Position: 8
Battery Charger (515)
Position: 8
Blade Brake Clutch
Position: 8
Decal, Bilingual Danger
Position: 9
Cable Anchor-Right Hand (511, 514-516, 522)
Position: 9
Bolt-Round Head Square Neck .25-20 x .38
Position: 9
Bolt-Hex .31-18 x .75 Grade 5 (511, 514-516, 522)
Position: 9
Recoil Start Handle
Position: 9
Screw-Tapping .38-16 x 1.00 Hex Washer Head
Position: 9
Decal, Key Switch (515)
Position: 10
Bolt-Round Head Square Neck .25-20 x 1.25 (511, 513-516)
Position: 10
Bolt-Round Head Square Neck .25-20 x 1.25 (522)
Position: 10
Nut-Push
Position: 10
Nut-Locking-Center .44-14 (511, 514-516)
Position: 10
Engine, Robin 6 HP 4 Cycle (511)
Position: 10
Engine, Briggs & Stratton Intek OHV 6.5HP Recoil (513, 514, 516)
Position: 10
Engine, Briggs & Stratton Intek OHV 6.5HP Electric Start (515)
Position: 10
Key-Woodruff .156 x .625 x 25
Position: 10
Decal, Engine Control
Position: 11
Nut-Locking-Center .25-20 (511, 513-516)
Position: 11
Nut-Locking-Center .25-20 (522)
Position: 11
Spring-Torsion .120 x .68 x 3.09
Position: 11
Spring, Tension .043 x .44 x 3.31 (511, 514-516)
Position: 11
Adapter, Blade .875 Dia with Keyway (513-516)
Position: 11
Adapter, Blade (511)
Position: 11
V-Belt 3L Section
Position: 11
Cable Tie
Position: 12
Pin-Door
Position: 12
Blade, 21" Mower
Position: 12
Key-Woodruff .156 x .625 x .25 SAE #6 (513-516)
Position: 12
Key-Woodruff .156 x .625 x .25 SAE #6 (511)
Position: 12
Bolt-Hex .44-14 x 1.50 Grade 5
Position: 12
Throttle Cable (511)
Position: 13
Throttle Cable (522)
Position: 13
Mulch Master Mulcher Accessory
Position: 13
Washer-Locking .38 x .094
Position: 13
Screw-Tapping .38-16 x 1.00 Hex Washer Head (513-516)
Position: 13
Idler-Flat 1.75 x .47
Position: 13
Brace-Speed Control
Position: 14
Nut-Locking-Flange .25-20
Position: 14
Bolt-Hex .38-24 x 2.00 Grade 8
Position: 14
Nut-Locking-Center .31-18 (511)
Position: 14
Nut-Locking-Center .31 -18
Position: 14
Bracket-Speed Control
Position: 15
Bolt-Round Head Square Neck .25-20 x .75 Grade 5
Position: 15
Washer-Flat Steel .390 x 1.50 x .125
Position: 15
Washer-Flat-Steel .312 x .734 x .065 (511)
Position: 15
Washer-Flat-Steel .323 x .625 x .062
Position: 15
Link-Handlebar Adjuster Left Hand (513-516, 522)
Position: 16
Link-Handlebar Adjuster Right Hand (513-516, 522)
Position: 16
Hinge Base Weldment (511, 514-516, 522)
Position: 16
Washer-Locking .312 x .097 Heavy (511)
Position: 16
Bushing-Sleeve .469 x .750 x .430
Position: 16
Handlebar Bracket (511)
Position: 17
Washer-Bellville Spring (513-516, 522)
Position: 17
Washer-Flat-Steel .328 x .87 x .179
Position: 17
Bolt-Hex .31-18 x 1.25 Grade 5 (511)
Position: 17
Idler Arm
Position: 17
Bushing-Flange .325 x .50 x .513 x .875 (513-516, 522)
Position: 18
Washer-Locking .25 x .077
Position: 18
Bushing-Flange .325 x .501 x .250 x 1.120
Position: 18
Nut-Locking-Center .31-18
Position: 19
Nut-Hex .25-20
Position: 19
Bolt-Hex .31-18 x .75 Grade 5
Position: 19
Bolt-Round Head Square Neck .25-20 x 1.38
Position: 20
Nut-Wing (511, 514-516, 522)
Position: 20
Nut-Locking-Center .44-14
Position: 20
Bolt-Round Head Square Neck .25-20 x .50 Grade 5
Position: 21
Drive Cover (511, 514-516, 522)
Position: 21
Spring, Tension .043 x .44 x 3.31
Position: 21
Knob (511, 514-516, 522)
Position: 22
Trim Bumper
Position: 22
Blade- Blade Brake/Clutch
Position: 22
Rod-Speed Control (511, 514-516, 522)
Position: 23
Mower Pan Head with Decals (511, 514-516)
Position: 23
Washer-Locking .44 x .109 Regular
Position: 23
Traction Cable (511, 514-516, 522)
Position: 24
Bolt-Round Head Square Neck .31-18 x .50 Grade 5 (511,513-515, 522)
Position: 24
Bolt-Hex M10 x 1.5 x 25
Position: 24
Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5 (513-516, 522)
Position: 25
Front Panel (511, 513-515, 522)
Position: 25
Rope Stop
Position: 25
Shoulder Spacer
Position: 26
Nut-Locking-Center .31-18 (511, 513-515, 522)
Position: 26
Bolt-Round Head Square Neck .31-18 x .75 Grade 5 (513-516, 522)
Position: 27
Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5 (511)
Position: 27
Grommet-Plastic
Position: 27
Nut-Locking-Center .38-16 (511, 514-516, 522)
Position: 28
Baffle-Center
Position: 28
Washer-Flat-Steel .406 x .812 x .065 (511, 514-516, 522)
Position: 29
Screw-Tapping 10-16 x .62 Hex Washer Head
Position: 29
Washer-Lock .375 x .115 Heavy (511, 514-516, 522)
Position: 30
Side Discharge Assembly
Position: 30
Pressure Flange (511, 514-516, 522)
Position: 31
Side Discharge Cover
Position: 31
Washer-Flat-Steel .281 x .620 x .065 (511, 514-516, 522)
Position: 32
Washer-Flat-Steel .406 x .812 x .065
Position: 32
Pin-Cotter .06 x .50 (511, 514-516, 522)
Position: 33
Nut-Locking-Nylon .312-18
Position: 33
Shift Link (511, 514-516, 522)
Position: 34
Bolt-Round Head Square Neck .31-18 x .75 Grade 2
Position: 34
Bell Crank-Speed Control (511, 514-516, 522)
Position: 35
Nut-Push .312
Position: 35
Friction Washer (511, 514-516, 522)
Position: 36
Nut-Locking-Flange .250-20 (511)
Position: 36
Cap, Rod .375 (511, 514-516, 522)
Position: 37
Nut-Wing #8-32 (515)
Position: 37
Swivel (511, 514-516, 522)
Position: 38
Battery Plate (515)
Position: 38
Bolt-Round Head Square Neck .38-16 x 1.25 (511, 514-516, 522)
Position: 39
U-Bolt (515)
Position: 39
Pin-Hair-Internal .08 x .18 x 1.18 (511, 514-516, 522)
Position: 40
Support Pad (511, 514-516, 522)
Position: 41
Rivet .187 x .575 (511, 514-516, 522)
Position: 42
Washer-Flat Steel .219 x .50 x .049 (511, 514-516, 522)
Position: 43
Bolt-Hex .31-18 x .75 Grade 5 (511)
Position: 44
Bolt-Round Head Square Neck .25-20 x 1.75 Grade 5 (511)
Position: 45
Bolt-Round Head Square Neck .25-20 x 1.75 XL (522)
Position: 46
Washer-Flat-Steel .250 x .562 x .049 (511)
Position: 46
Washer-Flat-Steel .281 x .62 x .065 (522)
Position: 47
Washer-Flat-Steel .219 x .50 x .049 (522)
Position: 47
Screw-Tapping 10-24 x .50 Hex Washer Head (522)
Position: 48
Control- Blade Brake/Clutch (522)
Position: 49
Screw-Machine 10-24X2.00 Hex Washer Head (522)
Position: 50
Nut-Hex 10-24 (522)
Position: 51
Cable Anchor-Left Hand (511, 513-516, 522)
Position: 52
Hinge Base (513)
Position: 01138259
Plate , Catcher (511)
Position: 01177759
Mower Pan Head Head with Decal Self Propelled Blade Brake/Clutch (522)
Position: 51107900
Mower Pan Head with Decals Push (513)
Position: 51108000