Reparatur-Assistent
Powered by ChatGPT
Ersatzteilliste
4 WASHER, BELLEVILLE - 1.500 X .755
Position: 1
1 SAFETY WALK, FLOOR REST, 6.00 X 16.00
Position: 1
1 TANK, FUEL, IS2000 & IS3100 - LH
Position: 1
6 CLAMP, HOSE, EXTERNAL, 1/2 - RED
Position: 1
1 ENGINE, 26HP KAWA, FX801V (Kawasaki Models Only)
Position: 1
1 PULLEY, IDLER, 5" OD, 1"FACE, 5.75 FL
Position: 1
1 TRANSAXLE, ZT4400, RH, 1710-1057R L-AXLE (61" Models Only)
Position: 1
4 SPACER, .52 X 1.00 X .75, CZ
Position: 1
2 TIRE ASSY, 13 X 6.5 SILVER (61" Models Only)
Position: 1
1 DECAL, FERRIS LOGO, SMALL
Position: 1
1 DECAL, MAIN SAFETY
Position: 1
1 DECAL, MAIN SAFETY, ANSI CE
Position: 1
6 WHEEL- 2.00 WIDE 3.88 DIA 0.531ID POLY
Position: 1
4 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 1
1 DECK SHELL W/DECALS, 61, 2100Z (5414870B)
Position: 1
1 BELT, 5V/SPB, 138.50 EL, LG ARAMID, WRPD
Position: 1
1 BELT, 5V/SPB, 131.25 EL, LG ARAMID, WRPD
Position: 1
1 ASSM, SPINDLE, LONG SHAFT
Position: 1
2 NUT, 3/4-16, HEX JAM NYLON LOCK
Position: 2
4 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 2
1 SAFETY WALK, FLOOR PLATE, S50X, 10X16
Position: 2
1 TANK, FUEL, IS2000 & IS3100 - RH
Position: 2
1 LIGHT, INDICATOR, PANEL, RED (EFI models only)
Position: 2
1 SPACER, 1.13 X 1.75 X 1.35, CZ
Position: 2
1 BELT, B-SEC, 123"EL, ARAMID, WRPD
Position: 2
2 PAD, .77 X 3.50 X .25, POLYURETHANE
Position: 2
1 TRANSAXLE, ZT4400, RH, 1710-1024R (52" Models Only)
Position: 2
4 WASHER, 1/2" GD9 YZ
Position: 2
1 DECAL, MODEL, IS2100Z
Position: 2
2 DECAL, PINCH POINT (Qty: 1 - 52" Models)
Position: 2
2 DECAL, PINCH POINT, CE (Qty: 1 - 52" Models)
Position: 2
2 SPACER, .38 X .50 X 5.06
Position: 2
1 NOT FOR SALE - RUBBER, 28.31"
Position: 2
4 PULLEY, SPNDL, 7.032"OB X .985"ID
Position: 2
4 PULLEY, SPNDL, 5.980"OB X .985"ID
Position: 2
1 FITTING, 1/8 NPT STR, SHORT (SV)
Position: 2
2 CAP, LOW PROFILE, STEEL
Position: 3
4 WASHER, 5/16 SAE
Position: 3
2 FUEL CAP, 3-1/2", MANAGED VENT OUT, 12"
Position: 3
1 MUFFLER, 27HP KAWASAKI, 5" CAN (Kawasaki Models Only)
Position: 3
1 TIE,SELF-LOCKING, 24" (Secures PTO Clutch wire to Clutch Anchor)
Position: 3
3 MOUNT, ISO, BOTTOM, RAD 5000Z-DIESEL
Position: 3
1 PULLEY-IDLER-V, 5.83OB, .38ID, .94W, STL
Position: 3
2 ROD, 5/16-24 RH & LH, 8.75" CZ
Position: 3
1 TRANSAXLE, ZT4400, LH, 1710-1057L L-AXLE (61" Models Only)
Position: 3
2 TIRE, FRONT, 13 X 6.5 X 6 (SV) (61" Models Only)
Position: 3
1 DECAL, TANK, MED, LH, FERRIS
Position: 3
2 DECAL, DANGER DO NOT OPERATE W/O DEFLECT
Position: 3
1 DECAL, CE DANGER
Position: 3
4 SPACER, .38 X .50 X 1.25
Position: 3
4 WASHER, 3/8 GD.9 FLAT
Position: 3
2 SHIELD, TRASH (SV)
Position: 3
2 BOLT, 1/4-28 X 1/2, GD5 YZ
Position: 4
1 KNOB-INT THR .312-18 4-ARM 2.12WD 1.06LG
Position: 4
1 CLUTCH, WARNER, 200 ft lbs - 1.13"
Position: 4
3 WASHER-3/8 FENDER
Position: 4
1 SPACER, .52 X 1.00 X .56, CZ
Position: 4
12 WASHER, 5/16 SAE
Position: 4
1 TRANSAXLE, ZT4400, LH, 1710-1024L (52" Models Only)
Position: 4
2 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 4
1 DECAL, TANK, MED, RH, FERRIS
Position: 4
1 DECAL, WARNING, HAND IN BELT, ENG ONLY
Position: 4
2 DECAL, DISCHARGE SAFETY, EXPORT
Position: 4
12 WASHER, 3/8 SAE
Position: 4
4 WASHER, 5/8 SAE
Position: 4
2 BEARING, .98 X 2.44 X .67 (SV)
Position: 4
4 WASHER, 3/8 SAE
Position: 5
2 WASHER, 5/16 SAE
Position: 5
8 SCREW, #10-24 X 3/8 ALLEN BHBZ
Position: 5
1 VALVE, FUEL SHUT-OFF,
Position: 5
1 PLUG, .820X1.44 HOLE, BLACK PLASTIC
Position: 5
1 BOLT, CRANKSHAFT, 7/16-20 X 3, GD8
Position: 5
1 PULLEY, C-SEC, V-IDLER, 6.25"ODX3/8ID
Position: 5
4 BALL JOINT 5/16-24 RH FEMALE BRONZE RACE
Position: 5
2 GUARD, RUBBER MOTION CONTROL
Position: 5
2 HYDRO TANK, HYDRO-GEAR 71938, 1 LITER
Position: 5
7 NUT, 1/2-13 HEX NYLON LOCK
Position: 5
1 DECAL, FERRIS, 2.23" X 11.39"
Position: 5
1 DECAL, MANUAL AVAIL IN SPANISH
Position: 5
1 DECAL, PARKING BRAKE SYMBOLS
Position: 5
21 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 5
1 HOUSING, SPINDLE (SV)
Position: 5
2 WASHER, 3/8 GD.9 FLAT
Position: 6
2 FITTING, 3/16" TEE, BARB TYPE, HDPE
Position: 6
1 SWITCH-PTO PUSH
Position: 6
1 GROMMET, 7/8"ID, 1/4" THICK STK
Position: 6
3 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 6
2 SPACER, IDLER ARM, 1/2, PM
Position: 6
4 PUSH RIVET (TREE TYPE), BLACK
Position: 6
8 BOLT, 1/2-13 X 1-1/4, SF, PLT W/PATCH
Position: 6
2 WASHER, 1/2 SAE
Position: 6
1 DECAL, 52 (52" Models Only)
Position: 6
2 DECAL, WARNING, ROLL BAR (Located on the front of the Roll bar pocket)
Position: 6
2 DECAL, WARNING, ROLLBAR, CE (Located on the front of the Roll bar pocket)
Position: 6
8 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 6
1 WASHER 3/8" SAE
Position: 6
4 NUT,5/8-11 HEX NYLON LOCK
Position: 6
1 CHUTE, RUBBER DISCHARGE (5104442)
Position: 6
3 SPACER, 1.00 X 1.50 X .70, BZ
Position: 6
1 FITTING, RELIEF, 1-5 PSI (SV)
Position: 6
8 WASHER, 5/16 LOCK YZ
Position: 7
1 SWITCH, IGNITION, 6 POST
Position: 7
1 EXTENSION, TAILPIPE, 3" (Kawasaki Models Only)
Position: 7
1 SPACER, .52 X .84 X 1.53, PM
Position: 7
4 NUT, 3/8-16 HEX SIDE LOCK
Position: 7
4 CLAMP, #10 HOSE, STAINLESS
Position: 7
1 DECAL, 61 (61" Models Only)
Position: 7
1 DECAL, TRANSAXLE RELEASE, ZT440
Position: 7
2 CLEVIS, 5/16-18, 3/8 PIN HOLE, CLR ZINC
Position: 7
4 BALL JOINT, 5/8-18, MALE
Position: 7
1 DECK SHELL W/DECALS, 52, 2100Z (5415324B)
Position: 7
3 SPINDLE ASSM, CAST IRON 8.0-6 BOLT, LS
Position: 7
3 WASHER, 3/4 BELLEVILLE CL/ZC
Position: 7
1 SPACER (SV)
Position: 7
4 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 8
2 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 8
8 WASHER, 5/16 F436 FLAT
Position: 8
1 LEVER, THROTTLE CONTROL, HEAVY-DUTY
Position: 8
1 HOSE, OIL DRAIN
Position: 8
2 CLAMP, HOSE, .75 FREE DIA.
Position: 8
1 SPRING-EXT, 1.25OD X 9.3LG X .142WR, BLK (Coil-to-coil measurement: 6-
Position: 8
4 BALL JOINT 5/16-24 LH FEMALE BRONZE RACE
Position: 8
3 NUT, 1/4-20 HEX NYLOCK FLANGE
Position: 8
2 SPACER, .34 X 1.54 X .25, PL
Position: 8
8 NUT, 1/2-20 HEX JAM
Position: 8
1 DECAL, iCD CUTTING SYSTEM
Position: 8
1 DECAL, FUEL VALVE
Position: 8
4 NUT, 5/8-18, HEX JAM
Position: 8
3 WASHER, BLADE BOLT, 9/16" F436, CZ
Position: 8
3 NUT, 3/4-16 HEX
Position: 8
1 SHAFT, SPINDLE (SV)
Position: 8
4 GREASE FITTING, 1/4-28 STRAIGHT
Position: 9
6 PLUG, PANEL, 1.25 - BLACK
Position: 9
2 GAUGE, FUEL, 12 (SV)
Position: 9
1 CABLE, CHOKE CONTROL, 47 (Carbuerated models only)
Position: 9
1 PULLEY, 4.75 OD X 1-1/8 BORE, BC-48
Position: 9
1 VALVE, OIL DRAIN, M16X1.5 TO 1/2"
Position: 9
1 SHIELD, PULLEY BEARING, CZ
Position: 9
2 SCREW, 5/16-18X1, PHILLIPS HD. BZ
Position: 9
4 BUSHING, 1.00X1.13X.75, PLA
Position: 9
2 BEARING ADJUSTER, SPACER, 7.062 LG (61" Models Only)
Position: 9
1 DECAL, THROTTLE CONTROL
Position: 9
2 SPACER, 1.00 X 1.50 X 1.14, BZ
Position: 9
4 BUSHING, 1.00 X 1.13 X .75, PLASTIC
Position: 10
2 SCREW, 1/2-13 X 1.00, SHCS
Position: 10
1 SEAT, C13, SEAT'SINC, 2016, W/SWITCH
Position: 10
1 NUT, 3/8-24 HEX (Carbuerated models only)
Position: 10
1 NUT, HEX, M16-1.5, DAPCO
Position: 10
2 SHIELD, BEARING PULLEY, 3/8ID, CZ
Position: 10
2 ROD, HYDRO LINKAGE, 14.63
Position: 10
2 CABLE, PARKING BRAKE, 32"
Position: 10
2 SPACER, .52 X 1.00 X 5.00
Position: 10
2 ADJUSTER, DECK HANGER (Qty: 1 on 52" Models)
Position: 10
2 BEARING ADJUSTER, SPACER, 6.062 LG (52" Models Only)
Position: 10
1 DECAL, WARNING, FOLDING ROPS
Position: 10
1 DECAL, SAFETY, CE ROPS
Position: 10
4 NUT, 3/8-16 HEX
Position: 10
2 SPACER, .51 X .75 X .56, CZ
Position: 10
3 BLADE, 21 X .25 X 2.5, 1 X 3.5
Position: 10
4 NUT, 3/4-16 HEX NYLON LOCK
Position: 11
12 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 11
2 WASHER, 3/8 SAE
Position: 11
1 SPACER, 1.13 X 1.75 X .25
Position: 11
1 OIL DRAIN CAP, OIL GUARD, DAPCO
Position: 11
2 SPACER, .33 X .63 X 1.25, CZ
Position: 11
4 BOLT, 3/8-16 X 1-1/4 SHCS
Position: 11
2 SPACER, .33 X .63 X .36, PM, CZ
Position: 11
2 SPACER, .39 X 2.00 X 1.35, PM
Position: 11
6 WASHER, .390 X 1.50 X .109, YZ
Position: 11
2 NUT, BEARING ADJUSTER, AXLE
Position: 11
1 DECAL, WARNING, OVERHAND, ROPS
Position: 11
1 DECAL, SAFETY, CE ROPS, OBS
Position: 11
2 SPACER, IDLER ARM, 1/2 X 2.25
Position: 11
1 SEAT BELT, RETRACTING - ASSM
Position: 12
4 TIE,SELF-LOCKING, 6"
Position: 12
2 BEARING, BALL, AXLE
Position: 12
8 NUT, 3/8-16 HEX NYLON LOCK
Position: 12
2 SPACER, .33 X .50 X .25, PM, CZ
Position: 12
4 WASHER-3/8 FENDER
Position: 12
4 PIVOT BLOCK, PLASTIC
Position: 12
4 DEBRIS, COVER, CASTER WHEELS
Position: 12
1 DECAL, IGNITION SWITCH
Position: 12
2 NUT, 5/16-18 HEX
Position: 12
2 BEARING, 6203-1/2", SEALED
Position: 12
10 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 13
1 RING, SWITCH RETAINER
Position: 13
1 CLUTCH ANCHOR PAD
Position: 13
4 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
Position: 13
2 TIE,SELF-LOCKING, 6"
Position: 13
1 SWITCH, DP NO/NC SNAP-IN
Position: 13
2 GREASE FITTING, 1/4-28 STRAIGHT
Position: 13
2 ROD, 1/2-20 X 24.50
Position: 13
1 DECAL, HYDRAULIC OIL, SAE 20W50
Position: 13
1 SPACER, .51 X .84 X 1.22, PM, CZ
Position: 13
4 SPACER, .76 X 1.00 X .25
Position: 14
12 WASHER, 1/2 SAE
Position: 14
1 ASSM, SEAT PLATE W/ DECALS, IS2100Z (5411749B) (USA Models Only)
Position: 14
1 CABLE, THROTTLE, 42"
Position: 14
4 WASHER, .34 X 1.25 X 10 GA
Position: 14
8 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
Position: 14
2 FITTING 22.5 ELBOW5/8 TUBE-7/8-14 O-RING
Position: 14
1 GRIP, FOAM, 3/4 ID X 6 X .187
Position: 14
4 BUSHING, FLANGE
Position: 14
2 ROD, DECK LIFT, 19.25, CZ
Position: 14
1 DECAL, BELT & BLADE IS2100Z COBALT 2BELT
Position: 14
15 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 14
4 NUT, 3/4-16 HEX JAM
Position: 15
1 ASSM, SEAT PLATE W/ DECALS, IS2100Z EXP (5411749B) (Export Models
Position: 15
2 REMOTE, VENT ASSEMBLY, NO VALVE (SV)
Position: 15
1 O-RING, 7/8 ID X 1/16 W
Position: 15
2 WASHER, 5/16 SAE (Qty: 6 - Briggs & Stratton Models)
Position: 15
1 EYE BOLT, 3/8-16 X 5, 2.88THRD (5021812)
Position: 15
6 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 15
2 SPRING, COMP. 1/2 ID X .140 WIRE X 3.25
Position: 15
2 SHOCK / SPRING ASSEMBLY, OE22376
Position: 15
2 ROD, SUSPENSION LINK, IS700, CZ
Position: 15
1 DECAL, CUT HEIGHT, IS700/ZTS700
Position: 15
8 WASHER, 5/16 SAE
Position: 15
1 NUT, 1/2-13 HEX NYLON LOCK
Position: 15
2 WASHER, 3/4" SAE
Position: 16
2 GROMMET (SV)
Position: 16
2 NUT, #10-24 HEX NYLON LOCK
Position: 16
1 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 16
2 SPACER, .39 X 1.00 X .50, CZ
Position: 16
2 SPACER, .32 X .75 X 1.06, PM
Position: 16
2 SPACER, .52 X 1.00 X .22, CZ
Position: 16
1 DECAL, CAUTION, FOLDING ROPS
Position: 16
1 DECAL, FIRE ANSI EXPORT
Position: 16
2 SEAL, GREASE
Position: 17
6 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 17
8 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 17
2 SPACER, .39 X 1.00 X .25
Position: 17
2 PIVOT, CONTROL SYSTEM
Position: 17
1 HOSE, HYD RES, LH, IS2100Z
Position: 17
2 NUT, 3/8-16 HEX SIDE LOCK
Position: 17
10 NUT, 1/2-20, FOR WHEEL BOLT SILVER
Position: 17
6 BODY CLIP, 5/16-18-7GA MATERIAL
Position: 17
6 WASHER, 5/16 SAE
Position: 17
1 PULLEY, IDLER, 5.50, CI, DBL BEARING
Position: 17
4 BEARING, TAPERED ROLLER,
Position: 18
10 MNT, VBRTN, RBBR
Position: 18
1 FILTER, FUEL
Position: 18
1 KEY, IGNITION MOLDED SET (SV)
Position: 18
2 WASHER-3/8 FENDER
Position: 18
12 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 18
1 HOSE, HYD RES, RH, IS2100Z
Position: 18
1 RUBBER, FOOT PEDAL
Position: 18
2 TIRE/WHEEL ASM, 24X12.00-12, TURF SMART (61" Models Only)
Position: 18
1 ROD, MOUNT, CHUTE 61, CZ
Position: 18
1 SPACER, .505 X 1.00 X .185, BZ
Position: 18
2 SHOCK / SPRING ASSEMBLY, OE22375
Position: 19
2 BUSHING-FUEL TANK RED RUBBER (SV)
Position: 19
1 COVER, PLASTIC, SNAP ON (SV)
Position: 19
1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
Position: 19
2 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 19
1 WASHER, 3/8 GD.9 FLAT
Position: 19
2 SPACER, .39 X .55 X .38, CZ
Position: 19
6 WASHER, 5/16 USS
Position: 19
1 SPACER, .52 X 1.00 X .88, CZ
Position: 19
2 TIRE/WHEEL ASM, 24X9.50-12, TURFSMART (52" Models Only)
Position: 19
1 SHIELD, PULLEY, 1/2"ID X 2-7/8"OD, CZ
Position: 19
2 HOSE ASSEMBLY (SV)
Position: 20
1 NUT, PLASTIC (SV)
Position: 20
2 BELLEVILLE WASHER 1.1875 X .442 X .089
Position: 20
1 OIL, 15W-50, SYNTHETIC, CASE X 12- 1QT
Position: 20
1 SPACER, .39 X 1.00 X .50, CZ
Position: 20
4 BEARING, .375" ID X .875" OD X .341" THK
Position: 20
2 CLAMP, VINYL INSULATED, 1.00
Position: 20
10 WASHER, 5/16 SAE
Position: 20
6 WASHER, 1/2 SAE
Position: 20
1 SAFETY WALK, 4.00 X 7.50
Position: 20
3 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 20
4 BALL JOINT, 3/4-16, MALE
Position: 21
3 WASHER, 1/4 SAE
Position: 21
1 TIE,SELF-LOCKING, 24"
Position: 21
4 NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS
Position: 21
1 OIL, 15W-50, SYNTHETIC, CASE X 4- 5QT
Position: 21
1 WASHER-3/8 FENDER
Position: 21
4 WAVE WASHER, 1/2"ID X 087"OD X .01 THK.
Position: 21
2 ARM, TRANSAXLE RELEASE, ZT4400
Position: 21
2 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
Position: 21
3 ASSM, SPINDLE, LONG SHAFT
Position: 21
1 WASHER, 1/2 SAE
Position: 21
4 BEARING, CUP (SV)
Position: 22
3 NUT, 1/4-20 HEX SERR. FLANGE
Position: 22
1 WASHER, 5/16 SAE
Position: 22
1 CLAMP, VINYL INSULATED, 1.00
Position: 22
4 WASHER, 5/16 INT. TOOTH LOCK
Position: 22
4 PAD, CONTROL SYSTEM
Position: 22
2 BUSHING, FLANGE 3/8ID X 7/8 LONG
Position: 22
2 WASHER,WAVE,M10
Position: 22
2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
Position: 22
1 SHIM, 1.0 X 1.5 X 0.125 (52" Models Only)
Position: 22
2 WHEEL, 12 X 8.5 (SV) (61" Models Only)
Position: 22
12 BOLT, 5/16-18 X 1 1/4 FLANGE
Position: 22
1 SAFETY WALK, 9.75 X 6.00
Position: 22
1 SPRING, EXT1.22"ODX10.5"FLX.192"WIRE BLK
Position: 22
2 SPACER, .76 X 1.00 X .50, CZ
Position: 23
1 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 23
1 WASHER, 1/4 SAE
Position: 23
1 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 23
2 PLATE, CONTROL SYSTEM ARM - HT
Position: 23
2 PIN, HAIR, .0915 X 1-7/8
Position: 23
2 NUT, 5/16-24 HEX NYLON LOCK
Position: 23
1 EYE BOLT, 3/8-16 X 5, 2.88THRD, 1EYE, CZ
Position: 23
2 SPACER, .75 X 1.50 X 1.00, CZ
Position: 24
2 SPRING, REVERSE RETURN
Position: 24
2 BOLT, 5/16-18 X 1 1/2 FLANGE
Position: 24
3 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 24
1 NUT, 1/4-20 HEX SERR. FLANGE
Position: 25
4 BOLT, 3/8-16 X 3/8, 1/2 SHOULDER
Position: 25
2 COLLAR, 5/16 SET
Position: 25
6 BOLT, 3/8-16 X 3/4, PLT W/PATCH
Position: 25
1 ADAPTER-OIL DRAIN (Kawasaki Models Only)
Position: 26
2 SPACER, .39 X .75 X .69, CZ
Position: 26
2 NUT, 7/16-14 HEX TOP LOCK
Position: 26
2 BEARING, 3/4" FLANGED, BRONZE
Position: 26
1 BELT, B-SEC, 64.00 EL, ARAMID, WRPD
Position: 26
1 BELT, B-SEC, 55.30 EL, ARAMID, WRPD
Position: 26
4 BOLT, 3/8-16 X 1-1/4, SF, PLT W/PATCH (Kawasaki Models Only)
Position: 27
4 NUT, 5/16-24 HEX
Position: 27
2 COLLAR, 3/8 SET
Position: 27
4 COLLAR, 5/8 SPLIT
Position: 27
2 PULLEY-IDLER-V, 4.85OB, .38ID
Position: 27
1 SWITCH, SEAT (SV)
Position: 28
2 SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ
Position: 28
4 NUT, 5/16-24 HEX, LH
Position: 28
2 ROD, NEUTRAL RETURN, CZ
Position: 28
1 SPRING-EXT, .740 ODX2.025LGX.072WR, BLK
Position: 28
2 SHIELD, PULLEY, 3/8"ID X 2"OD, CZ
Position: 28
1 WASHER, 5/16 LOCK CZ (Kawasaki Models Only)
Position: 29
2 FLANGED BUSHING, 3/8IDX.63ODX.8125FL
Position: 29
2 EYE BOLT, 3/8-16 X 8, 3THRD, 1EYE, CZ (Qty: 1 on 52" Models)
Position: 29
1 NUT, HEX, M8-1.25, CZ, GD 8.8 (Kawasaki Models Only)
Position: 30
4 10MM BALL STUD, 5/16-18 X 3/4 THDS
Position: 30
1 GRIP, FOAM, .475 X 4.35 X .095
Position: 30
1 NUT, M8-1.25 SERR. FLANGE, CZ (Kawasaki Models Only)
Position: 31
2 GRIP, FOAM, 1" ID, 16" LONG
Position: 31
2 SPACER, .25 X .38 X .63, CZ
Position: 31
2 SPRING-EXT, 1.00 ODX13.25LGX.177WR, BLK (Qty: 1 on 52" Models)
Position: 31
1 BOLT, M8-1.25 X 16MM GD8.8 (Kawasaki Models Only)
Position: 32
3 NUT, 1/4-20 HEX NYLON LOCK
Position: 32
1 PIN, HITCH, 1/2 X 2.00 OAL, YP
Position: 32
1 ENGINE, 26HP, B&S, VANGUARD (Briggs & Stratton Models)
Position: 33
2 WASHER, 1/4 FENDER
Position: 33
1 SPRING-EXT, 1.04 ODX6.935LGX.148WR, BLK
Position: 33
1 MUFFLER, RIGHT OUTLET ASSY (Briggs & Stratton Models)
Position: 34
2 WASHER, 1/4 SAE
Position: 34
1 SPACER, .39 X 1.00 X .75, CZ
Position: 34
4 SCREW-HEX SEMS LOCK WSHR 5/16-18X0.875 (Briggs & Stratton Models)
Position: 35
2 DAMPENER, CONTROL,#(P6709/P3610)
Position: 35
2 NUT, 1/4-20 HEX NYLOCK FLANGE
Position: 35
2 SPACER, .38 X .50 X .27, CZ
Position: 35
2 GASKET, EXHAUST (Briggs & Stratton Models)
Position: 36
3 WASHER, 3/8 SAE
Position: 36
1 EXTENSION, TAILPIPE, 3", BLACK (Briggs & Stratton Models)
Position: 37
2 BEARING, FLANGE
Position: 37
8 WASHER, 3/8 SAE
Position: 37
2 BEARING, BRONZE FLANGE, 3/4
Position: 38
5 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 38
4 WASHER, 5/16 INT. TOOTH LOCK (Briggs & Stratton Models)
Position: 39
8 JOINT-BALL .500-20 THD .500ID, CLR ZINC
Position: 39
2 SPACER, .39 X .75 X .38, PM, CZ
Position: 39
4 NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS (Briggs & Stratton Models)
Position: 40
1 WASHER, .52 X 1.75 X .14, CZ
Position: 45
1 SPACER, .39 X .63 X .375, DOM
Position: 46
1 SPACER, .39 X .63 X .375M DOM CZ
Position: 46
8 BUSHING, 1.00 X 1.13 X 1.38, PLASTIC
Position: 48
2 NUT, 3/8-16 HEX (Qty: 1 on 52" Models)
Position: 52
2 NUT, 3/8-16 HEX NYLON LOCK (Qty: 1 on 52" Models)
Position: 53
1 RETAINING RING, BRAKE ARM, ZT4400 (SV) (53019)
Position: 92
1 KIT, FAN/PULLEY (SV) (72476)
Position: 136
Aubière Cedex
Position: 63178
IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZBV2652)
Position: 5901581
IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZKAV2652)
Position: 5901582
IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZBVE2852)
Position: 5901583
IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZBVE2852 ANSI EXP)
Position: 5901584
IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZBV2652 CAL)
Position: 5901585
IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZBVE2852 CAL)
Position: 5901586
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZBV2661)
Position: 5901587
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZKAV2661)
Position: 5901588
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZBVE2861)
Position: 5901589
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZBVE2861 ANSI EXP)
Position: 5901590
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZKAV2661 CAL)
Position: 5901591
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZBV2661 CAL)
Position: 5901592
IS2100Z Series w/ 61" Mower Deck & ROPS (IS2100ZBVE2861 CAL)
Position: 5901593