Explosionszeichnung elp 21703 bv SNAPPER elp21703bv

Entdecken Sie die vollständige Explosionszeichnung elp 21703 bv SNAPPER elp21703bv – ein unverzichtbarer Leitfaden zur Identifizierung aller Ersatzteile. Unsere Darstellung hilft Ihnen, jede Komponente Ihres elp 21703 bv zu verstehen. Finden Sie schnell die benötigten Teile für Ihr elp 21703 bv SNAPPER elp21703bv.

Reparatur-Assistent Powered by ChatGPT

Ersatzteilliste

1 HANDLE, Upper
1 HANDLE, Upper
Position: 1
1 ROD, Trailing Shield Pivot (1/4” Dia. X 16-1/4” long)
1 ROD, Trailing Shield Pivot (1/4” Dia. X 16-1/4” long)
Position: 1
2 HUBCAP, 9” Euro
2 HUBCAP, 9” Euro
Position: 1
1 AXLE/TRANSMISSION ASSY (Incl. items 2-19 )
1 AXLE/TRANSMISSION ASSY (Incl. items 2-19 )
Position: 1
1 DECAL, SNAPPER
1 DECAL, SNAPPER
Position: 1
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
Position: 1
1 HANDLE, Middle
1 HANDLE, Middle
Position: 2
1 SHIELD, Trailing, Commercial Cast
1 SHIELD, Trailing, Commercial Cast
Position: 2
4 HAIRPIN, 1/16 x 29/32” Cotter
4 HAIRPIN, 1/16 x 29/32” Cotter
Position: 2
1 TRANSMISSION ASSY, 3SP Commercial Waldes # 5133-50
1 TRANSMISSION ASSY, 3SP Commercial Waldes # 5133-50
Position: 2
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Position: 2
1 ASSY, Catcher Frame/Grip (incl. frame weldment 44915) GRASS CATCHER PARTS
1 ASSY, Catcher Frame/Grip (incl. frame weldment 44915) GRASS CATCHER PARTS
Position: 2
2 BRACKET, Handle
2 BRACKET, Handle
Position: 3
4 BOLT, 5/16-18 x 1” Round Head Carriage GR 5 Was
4 BOLT, 5/16-18 x 1” Round Head Carriage GR 5 Was
Position: 3
4 WASHER, 1/2” Flat
4 WASHER, 1/2” Flat
Position: 3
1 WELDMENT, Rear Axle
1 WELDMENT, Rear Axle
Position: 3
1 DECAL, Danger (Keep Hands and Feet Away)
1 DECAL, Danger (Keep Hands and Feet Away)
Position: 3
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
Position: 3
1 COTTER PIN, Bow Tie Locking
1 COTTER PIN, Bow Tie Locking
Position: 4
2 WASHER, .28 x .63 x .06 Flat Was
2 WASHER, .28 x .63 x .06 Flat Was
Position: 4
1 BUSHING, Wheel (PM)
1 BUSHING, Wheel (PM)
Position: 4
2 SHIELD, Dust
2 SHIELD, Dust
Position: 4
1 DECAL, Warning (International Symbol)
1 DECAL, Warning (International Symbol)
Position: 4
1 PLUG, Mulching MULCHING PARTS
1 PLUG, Mulching MULCHING PARTS
Position: 4
1 BAIL, OPC Control
1 BAIL, OPC Control
Position: 5
8 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap Was
8 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap Was
Position: 5
2 WHEEL ASSY, 9.0 x 2.0 (Rear Drive) includes 73618 bushing
2 WHEEL ASSY, 9.0 x 2.0 (Rear Drive) includes 73618 bushing
Position: 5
2 PAWL, 3/16” O.D.
2 PAWL, 3/16” O.D.
Position: 5
1 DECAL, SNAPPER, Panel
1 DECAL, SNAPPER, Panel
Position: 5
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 13010) DISCHARGING PARTS
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 13010) DISCHARGING PARTS
Position: 5
1 CLIP, Zone Control
1 CLIP, Zone Control
Position: 6
1 PLATE, Height Adjust
1 PLATE, Height Adjust
Position: 6
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
Position: 6
1 PINION, RH Drive
1 PINION, RH Drive
Position: 6
1 DECAL, Chute Deflector (Cast)
1 DECAL, Chute Deflector (Cast)
Position: 6
1 CABLE, Zone Control Snapper p/n is stamped on cable
1 CABLE, Zone Control Snapper p/n is stamped on cable
Position: 7
2 RIVET, 3/16 x 1/2” Steel
2 RIVET, 3/16 x 1/2” Steel
Position: 7
2 WHEEL RETAINER, 3/8”
2 WHEEL RETAINER, 3/8”
Position: 7
1 PINION, LH Drive
1 PINION, LH Drive
Position: 7
2 DECAL, Chute/International Warning
2 DECAL, Chute/International Warning
Position: 7
1 WELDMENT, Handle Clutch
1 WELDMENT, Handle Clutch
Position: 8
1 ASSEMBLY, Discharge Door
1 ASSEMBLY, Discharge Door
Position: 8
1 PIN, 3/8 x 5/8”
1 PIN, 3/8 x 5/8”
Position: 8
4 RING, External Retaining
4 RING, External Retaining
Position: 8
1 DECAL, Warning
1 DECAL, Warning
Position: 8
1 GRIP, International Symbol
1 GRIP, International Symbol
Position: 9
1 COTTER PIN, 1/8 x 3/4” Was
1 COTTER PIN, 1/8 x 3/4” Was
Position: 9
1 GRIP, Flat Bar
1 GRIP, Flat Bar
Position: 9
1 DECAL, OPC Bail International Symbol
1 DECAL, OPC Bail International Symbol
Position: 9
1 CABLE, Clutch (Adjustable)
1 CABLE, Clutch (Adjustable)
Position: 10
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
Position: 10
1 SPRING, Tie Bar
1 SPRING, Tie Bar
Position: 10
2 RETAINER, Pinion Seal
2 RETAINER, Pinion Seal
Position: 10
1 DECAL, Height Control Instruction (Euro)
1 DECAL, Height Control Instruction (Euro)
Position: 10
5 CLAMP, 7/8” Double Cable
5 CLAMP, 7/8” Double Cable
Position: 11
1 BELT COVER, Commercial Metal B&S
1 BELT COVER, Commercial Metal B&S
Position: 11
1 WELDMENT, Tie Bar
1 WELDMENT, Tie Bar
Position: 11
2 SEAL, Pinion (Felt)
2 SEAL, Pinion (Felt)
Position: 11
1 DECAL, European Community (CE)
1 DECAL, European Community (CE)
Position: 11
1 CABLE-TIE, 7” not shown
1 CABLE-TIE, 7” not shown
Position: 12
1 DECK, 21” Cast Aluminum Rocker (Red)
1 DECK, 21” Cast Aluminum Rocker (Red)
Position: 12
2 HUB-CAP, Front Wheels
2 HUB-CAP, Front Wheels
Position: 12
2 ASSEMBLY, Bearing Carrier includes bearing p/n
2 ASSEMBLY, Bearing Carrier includes bearing p/n
Position: 12
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Position: 12
1 BRACKET, Shift
1 BRACKET, Shift
Position: 13
1 PLUG, Hole (Polyethylene)
1 PLUG, Hole (Polyethylene)
Position: 13
2 WHEEL ASSY, 8.0 x 2.0 (Front)
2 WHEEL ASSY, 8.0 x 2.0 (Front)
Position: 13
2 BUSHING, Rear Axle (S/P)
2 BUSHING, Rear Axle (S/P)
Position: 13
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Position: 13
4 WIRE TIE, 1.29” Long Black
4 WIRE TIE, 1.29” Long Black
Position: 14
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position: 14
2 BUSHING, Front Axle
2 BUSHING, Front Axle
Position: 14
1 TUBING, 5/8 I.D. Convoluted
1 TUBING, 5/8 I.D. Convoluted
Position: 14
1 DECAL, Convertible Mower
1 DECAL, Convertible Mower
Position: 14
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position: 15
1 KEY, Hi-Pro #HP506 (Briggs engine)
1 KEY, Hi-Pro #HP506 (Briggs engine)
Position: 15
1 WELDMENT, Front Axle
1 WELDMENT, Front Axle
Position: 15
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
Position: 15
1 DECAL, Throttle Control, B&S
1 DECAL, Throttle Control, B&S
Position: 15
8 WASHER, 11/32” Flat
8 WASHER, 11/32” Flat
Position: 16
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
Position: 16
1 SPRING, Axle Retaining LH
1 SPRING, Axle Retaining LH
Position: 16
1 BRACKET, Transmission
1 BRACKET, Transmission
Position: 16
1 DECAL, Noise
1 DECAL, Noise
Position: 16
2 WASHER, 7/32” Flat
2 WASHER, 7/32” Flat
Position: 17
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
Position: 17
1 SPRING, Axle Retaining RH
1 SPRING, Axle Retaining RH
Position: 17
1 NUT, M10 x 1.50 Hex Nyloc
1 NUT, M10 x 1.50 Hex Nyloc
Position: 17
1 DECAL, Speed Shift- ELP, ECLP
1 DECAL, Speed Shift- ELP, ECLP
Position: 17
1 CONTROL PANEL (w/o El. Switch Hole)
1 CONTROL PANEL (w/o El. Switch Hole)
Position: 18
2 NUT, 3/8-16 Hex Nyloc
2 NUT, 3/8-16 Hex Nyloc
Position: 18
1 *SPRING, Clutch
1 *SPRING, Clutch
Position: 18
1 PULLEY, Transmission
1 PULLEY, Transmission
Position: 18
1 DECAL, 2005 Year of Manufacture
1 DECAL, 2005 Year of Manufacture
Position: 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
Position: 19
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
Position: 19
1 WASHER, Felt
1 WASHER, Felt
Position: 19
1 DECAL, OPEI Walk/Ride
1 DECAL, OPEI Walk/Ride
Position: 19
1 ROPE GUIDE (1/4-20 threads)
1 ROPE GUIDE (1/4-20 threads)
Position: 20
2 NUT, 3/8-16 Hex Flange Lock Was
2 NUT, 3/8-16 Hex Flange Lock Was
Position: 20
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
Position: 20
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position: 21
2 IDLER SPACER
2 IDLER SPACER
Position: 21
2 WASHER, 17/32” Flat
2 WASHER, 17/32” Flat
Position: 21
1 THROTTLE CONTROL, 7.0 B&S Snapper p/n is stamped on cable
1 THROTTLE CONTROL, 7.0 B&S Snapper p/n is stamped on cable
Position: 22
1 BELT GUIDE (Wireform)
1 BELT GUIDE (Wireform)
Position: 22
1 SPRING, Clutch
1 SPRING, Clutch
Position: 22
2 THROTTLE KNOB
2 THROTTLE KNOB
Position: 23
1 WASHER, 3/8” Split Lock (Heavy)
1 WASHER, 3/8” Split Lock (Heavy)
Position: 23
1 *LEVER, Transmission (Metal)
1 *LEVER, Transmission (Metal)
Position: 23
6 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
6 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
Position: 24
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR
Position: 24
1 *SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
1 *SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position: 24
1 FOAM GRIP, 18.75”
1 FOAM GRIP, 18.75”
Position: 25
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
Position: 25
2 *NUT, #10-24 Hex Center Lock
2 *NUT, #10-24 Hex Center Lock
Position: 25
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position: 26
1 KIT, Height Adjusting Lever (incl. items 27-29)
1 KIT, Height Adjusting Lever (incl. items 27-29)
Position: 26
2 NUT, 3/8-16 Hex Center Lock
2 NUT, 3/8-16 Hex Center Lock
Position: 27
2 SUPPORT, Rear Axle
2 SUPPORT, Rear Axle
Position: 27
1 LEVER, Height Adjusting (Black)
1 LEVER, Height Adjusting (Black)
Position: 27
6 WASHER, 5/16” Internal Tooth Lock
6 WASHER, 5/16” Internal Tooth Lock
Position: 28
1 PUSHNUT, 1/4” Black
1 PUSHNUT, 1/4” Black
Position: 28
2 SCREW, #10-32 x 5/8, Hex Washer Self-Tap, GR
2 SCREW, #10-32 x 5/8, Hex Washer Self-Tap, GR
Position: 28
1 CONTROL, Speed Select
1 CONTROL, Speed Select
Position: 29
1 BAFFLE, Discharge
1 BAFFLE, Discharge
Position: 29
2 NUT, #10-32 Hex Nyloc
2 NUT, #10-32 Hex Nyloc
Position: 29
2 SCREW, 5/16-18 x 2” Square Neck Curved Head Was
2 SCREW, 5/16-18 x 2” Square Neck Curved Head Was
Position: 30
5 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
5 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position: 30
8 NUT, 5/16-18 Hex Nyloc
8 NUT, 5/16-18 Hex Nyloc
Position: 31
1 BLADE, 21” Bagging
1 BLADE, 21” Bagging
Position: 31
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
Position: 32
5 WASHER, 1/4” Internal Tooth Lock Was
5 WASHER, 1/4” Internal Tooth Lock Was
Position: 33
5 NUT, 1/4-20 Hex Was
5 NUT, 1/4-20 Hex Was
Position: 34
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position: 35
2 BUSHING, .27 x .35 x .4 Flange
2 BUSHING, .27 x .35 x .4 Flange
Position: 36
1 PIN, 1/4 x 1-1/2”
1 PIN, 1/4 x 1-1/2”
Position: 37
1 PUSHNUT, 1/4”
1 PUSHNUT, 1/4”
Position: 38
1 CLAMP, Double Tube
1 CLAMP, Double Tube
Position: 39
2 KNOB, 5/16-18 Wing (Black)
2 KNOB, 5/16-18 Wing (Black)
Position: 40