Explosionszeichnung mrp 216017 b SNAPPER mrp216017b
Entdecken Sie die vollständige Explosionszeichnung mrp 216017 b SNAPPER mrp216017b – ein unverzichtbarer Leitfaden zur Identifizierung aller Ersatzteile. Unsere Darstellung hilft Ihnen, jede Komponente Ihres mrp 216017 b zu verstehen. Finden Sie schnell die benötigten Teile für Ihr mrp 216017 b SNAPPER mrp216017b.
Reparatur-Assistent
Powered by ChatGPT
Ersatzteilliste
1 HANDLE, Upper Was 72931 (used on All)
Position: 1
1 HANDLE, Upper used on Push Models (except
Position: 1
1 HANDLE, Upper used on Push Model
Position: 1
1 HANDLE, Upper used on Self-Propelled
Position: 1
1 DECK, 21” Mower Includes painted deck with
Position: 1
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A &
Position: 1
2 BALL BEARING, 9/16” I.D.
Position: 1
2 BALL BEARING, 9/16” I.D. (Commercial) Was
Position: 1
1 BELT, Poly-Vee
Position: 1
1 NUT, 5/16-24 Hex Lock, GR C Was
Position: 1
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and
Position: 1
1 DECAL, Blade Control
Position: 1
ASSEMBLY, Bag Adapter & Cover Includes items 2 thru 9; used on
Position: 1
1 GRASS BAG, Slider Type (Black)
Position: 1
2 ** LATCH, Frame Attachment
Position: 1
1 SCREEN, Fastener Assembly
Position: 1
1 HANDLE, Middle- 1990 used on All
Position: 2
1 HANDLE, Middle-
Position: 2
10 NUT, 5/16-18 Hex Flange Lock, GR5 Was
Position: 2
2 BOLT, 5/16-18 Hex Washer Face Shoulder
Position: 2
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
Position: 2
1 LINK, Differential
Position: 2
1 WASHER, Cone
Position: 2
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and
Position: 2
1 DECAL, Blade Control (Euro)
Position: 2
1 ADAPTER, Grass Bag
Position: 2
1 ASSEMBLY, Slider
Position: 2
1 RING, Bottom
Position: 2
1 PLUG, Chute Adapter
Position: 2
1 HANDLE, Lower Left Hand used on All
Position: 3
1 HANDLE, Lower Left Hand
Position: 3
9 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5 Was
Position: 3
2 LATCH, Height
Position: 3
2 LATCH, Height Adjusting (Long)
Position: 3
1 ARM, Clutch Idler
Position: 3
1 PULLEY, Poly-Vee Belt
Position: 3
2 NUT, 7/16-20 Hex Center Lock Jam
Position: 3
1 DECAL, Speed Select used on Self-Propelled models
Position: 3
1 COVER, Bag Adapter
Position: 3
1 CONNECTOR, Grass Bag (weldment)
Position: 3
2 ROD, Tine
Position: 3
3 NUT, 5/16-24 Hex, GR5 Was 90223, only 1 shown
Position: 3
1 BLADE, 21” Quad Edge Ninja
Position: 3
1 HANDLE, Lower Right Hand used on All
Position: 4
1 HANDLE, Lower Right Hand
Position: 4
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
Position: 4
2 GRIP, Latch
Position: 4
1 NUT, 1/4-20 Hex Was
Position: 4
2 PULLEY, Idler
Position: 4
2 WASHER, Spring only 1 shown
Position: 4
2 BUSHING, Axle
Position: 4
1 DECAL, Speed Select (Euro) used on Self-Propelled models
Position: 4
1 HINGE, Chute Cover
Position: 4
1 WIRE, Bag Adapter
Position: 4
1 SUPPORT, Wheel
Position: 4
3 WASHER, 5/16” Split Lock only 1 shown
Position: 4
1 BAIL, Blade Control used on All
Position: 5
1 BAIL, OPC Control (12.5" Wide)
Position: 5
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
Position: 5
6 NUT, 5/16-18 Hex Flange Lock, GR5 Was
Position: 5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Position: 5
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9, 10 &
Position: 5
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1)
Position: 5
4 WASHER, 7/16 x 1” O.D. Flat
Position: 5
1 DECAL, Danger, Cut Finger
Position: 5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
Position: 5
1 ADAPTER, Bag
Position: 5
1 TRAY, Tine
Position: 5
3 SPRING only 1 shown
Position: 5
1 CLIP, Blade Control used on All
Position: 6
1 CLIP, Blade Control
Position: 6
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
Position: 6
2 RETAINER, 5/16” Bolt (Black)
Position: 6
1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.
Position: 6
1 NUT, 1/4-28 Hex Top Lock
Position: 6
1 HOUSING, Right Side
Position: 6
2 PLUG, Wheel
Position: 6
1 DECAL, Warning (Euro)
Position: 6
5 WASHER, 1/4” Internal Tooth Lock Was
Position: 6
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
Position: 6
6 KIT, Tine Thatching Spring Was
Position: 6
1 CABLE, Blade Control (49-1/4” long) used on All
Position: 7
1 CABLE, Blade Control (49-1/4” long) used on MR216517B &
Position: 7
1 CABLE, Blade Control (46.-15/16” long) used on All Other Models
Position: 7
2 WASHER, 3/8” I.D. Cone
Position: 7
2 NUT, 5/16-18 Hex Flange Lock Was
Position: 7
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.
Position: 7
2 BUSHING, 3/8” Plastic
Position: 7
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
Position: 7
1 DECAL, Shift Warning used on Self-Propelled models
Position: 7
5 NUT, 1/4-20 Hex Was
Position: 7
1 ADAPTER, Bag
Position: 7
1 ** BUSHING, Wheel Adjuster
Position: 7
1 HANDLE, Wheel Drive used on Self-Propelled
Position: 8
1 HANDLE, Wheel Drive used on Self-Propelled
Position: 8
1 WELDMENT, Front Wheel Bracket Was
Position: 8
1 ASSEMBLY, Wheel Arm (Right Rear) Was 54230 (Self-Propelled
Position: 8
1 ASSEMBLY, Wheel Arm, Right Rear Was 54224 (Commercial
Position: 8
1 SHAFT, Hex Drive
Position: 8
2 SEAL, 5/8” Internal Dia.
Position: 8
1 DECAL, SNAPPER, 3.87 Dia. (Push)
Position: 8
1 STOP, Cover
Position: 8
1 BRACKET, Rope Pulley
Position: 8
1 ** AXLE, Wheel
Position: 8
1 GRIP, Wheel Drive Handle used on Self-Propelled
Position: 9
1 GRIP, Wheel Drive Handle used on Self-Propelled
Position: 9
1 HUB, Blade Drive 25mm
Position: 9
1 AXLE
Position: 9
1 ASSEMBLY, Wheel Arm (Left Rear) Was 54231 (Self-Propelled
Position: 9
1 ASSEMBLY, Wheel Arm, Left Rear Was 54225 (Commercial
Position: 9
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
Position: 9
2 BEARING, Tapered- (Differential Housing)
Position: 9
1 DECAL, Warning
Position: 9
1 MOLDING, Trim
Position: 9
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
Position: 9
1 WHEEL, 7.00 x 1.50 Gage
Position: 9
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
Position: 10
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
Position: 10
1 KEY, Hi-Pro #HP506 (Briggs engine)
Position: 10
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
Position: 10
1 WASHER, 3/8” Flat
Position: 10
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375 Thk. Was
Position: 10
1 DECAL, Operator Safety
Position: 10
1 BUSHING, Flange
Position: 10
10 * NUT, 1/4-20 Hex Top Lock Was 90761, only 9 shown
Position: 10
1 COVER, Vinyl used on Self-Propelled
Position: 11
1 COVER, Vinyl used on Self-Propelled
Position: 11
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
Position: 11
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
Position: 11
1 SPRING, Torsion
Position: 11
1 PLUG, Housing
Position: 11
1 DECAL, Caution Symbols
Position: 11
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
Position: 11
1 PULLEY, Plastic
Position: 11
4 * WASHER, 1/4” Flat Was
Position: 11
1 SPRING, Clutch used on Self-Propelled
Position: 12
1 SPRING, Clutch used on Self-Propelled
Position: 12
1 PULLEY, Engine Drive (25mm x 2-1/8” O.D.)
Position: 12
1 ARM, Wheel, Right Rear used on Self-Propelled models
Position: 12
1 STUD, Idler (3/8-24 thread)
Position: 12
1 GEAR, Input
Position: 12
1 DECAL, SNAPPER (Deck) silver letters, black background
Position: 12
1 NUT, 5/16-18 Hex Large Flange Center Lock
Position: 12
1 NUT, 5/16-18 Hex Flange Lock GR5 Was
Position: 12
2 ** SPRING, Compression
Position: 12
1 SECTOR, Speed used on Self-Propelled
Position: 13
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
Position: 13
1 ARM, Wheel, Left Rear used on Self-Propelled models
Position: 13
1 HOLDER, Bearing (Inner Half)
Position: 13
1 AXLE, Short
Position: 13
1 DECAL, SNAPPER silver letters, black background
Position: 13
1 RETAINER, 5/16” Bolt
Position: 13
2 WASHER, 15/32” Flat
Position: 13
2 * BOLT, 1/4-20 x 1-1/4” Hex, GR
Position: 13
1 BOLT, 5/16-18 x 1” Square Neck Carriage GR 5 Was 91238 (used on All)
Position: 14
1 WIRE TIE, 1.29” Long (Black)
Position: 14
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was 90001 (only one shown)
Position: 14
2 BOLT, 5/16-18 x 1” Shoulder
Position: 14
1 BEARING, Ball, .38 I.D. Spherical O.D.
Position: 14
1 GEAR, Differential (46 tooth)
Position: 14
1 DECAL, Euro Community (CE)
Position: 14
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was
Position: 14
4 RIVET, 3/16 x .344
Position: 14
2 * NUT, 1/4-20 Hex, GR 5 Was
Position: 14
1 SPRING, Speed Control used on Self-Propelled
Position: 15
1 SPRING, Speed Control used on Self-Propelled
Position: 15
2 RETAINER, 5/16” Bolt (only one shown)
Position: 15
2 RETAINER, 5/16” Bolt
Position: 15
1 O-RING
Position: 15
2 PLATE, 46T Gear
Position: 15
1 DECAL, SNAPPER (Commercial) gold letters/red border/black
Position: 15
1 CHUTE, Side
Position: 15
2 ** CAP, Vinyl
Position: 15
1 WASHER, 3/8” Flat used on Self-Propelled
Position: 16
1 WASHER, 3/8” Flat used on Self-Propelled
Position: 16
3 NUT, 5/16-18 Hex Flange Lock, GR5 Was
Position: 16
1 NUT, 3/8-24 Hex Center Lock GR5 or B
Position: 16
2 WASHER, Thrust, 3/4” I.D.
Position: 16
1 DECAL, Spark Plug International Symbol
Position: 16
2 WASHER, 3/8" Flat Was
Position: 16
2 * BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
Position: 16
1 GRIP, Speed Control Handle Was 29383, used on Self-
Position: 17
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539 (used on Euro
Position: 17
1 BRACKET, Right Rear Wheel
Position: 17
1 HOLDER, Bearing (Outer Half)
Position: 17
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
Position: 17
1 DECAL, Deck Warning
Position: 17
2 WING-NUT, 5/16-18 Nyloc
Position: 17
6 * BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5 Was 90383, only 1 shown
Position: 17
1 DECAL, Speed Select used on Self-Propelled
Position: 18
1 WASHER, 7/16” Flat
Position: 18
1 BRACKET, Left Rear Wheel
Position: 18
1 CLIP, Transfer Rod 1/4”
Position: 18
1 GASKET, Housing
Position: 18
1 DECAL, Ninja
Position: 18
1 COVER, 21” Deck
Position: 18
2 * BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR 5 Was
Position: 18
1 GUIDE, Lower V-Belt used on Self-Propelled
Position: 19
1 GUIDE, Lower V-Belt used on Self-Propelled
Position: 19
1 DECAL, Operator Safety used on Euro models
Position: 19
1 AXLE Rear axle on Push Models;
Position: 19
1 ROD, Transfer used on Non-Euro models
Position: 19
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
Position: 19
1 DECAL, Patent Numbers
Position: 19
2 NUT, 5/16-18 Hex Large Flange Center Lock
Position: 19
6 * WASHER, Reinforcing (.343 I.D.) only 1 shown
Position: 19
1 ROD, Transfer used on Self-Propelled
Position: 20
1 ROD, Transfer used on Self-Propelled
Position: 20
2 PLUG, Hole Polyethylene
Position: 20
1 GUARD, Rear Foot used on Push models
Position: 20
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
Position: 20
1 BRACKET, Differential
Position: 20
1 DECAL, Primer (European)
Position: 20
6 * WASHER, 5/16” Split Lock only 1 shown
Position: 20
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
Position: 21
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
Position: 21
1 GUARD, Rear Foot used on Self-Propelled models
Position: 21
1 GUARD, Rear Foot used on Euro Self-Propelled
Position: 21
1 PLATE, Thrust
Position: 21
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
Position: 21
1 DECAL, Air Filter (European)
Position: 21
6 * NUT, 5/16-18 Hex, GR 5 Was 90196, only 1 shown
Position: 21
1 TEE-NUT, 5/16-18 used on Self-Propelled
Position: 22
1 TEE-NUT, 5/16-18 used on Self-Propelled
Position: 22
1 SPACER, Blade Hub
Position: 22
1 RING, Split (Black) used on Self-Propelled models
Position: 22
2 RING, 5/8” External Retaining used on Self-Propelled
Position: 22
1 SPACER, Axle Gear
Position: 22
1 DECAL, Deck/Chute (European)
Position: 22
2 ** NUT, 1/2” Push
Position: 22
1 BUSHING, Differential used on Self-Propelled
Position: 23
1 BUSHING, Differential used on Self-Propelled
Position: 23
1 WELDMENT, Fender used on Euro models
Position: 23
1 SUPPORT, Foot Guard used on Self-Propelled models
Position: 23
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
Position: 23
1 AXLE, Long
Position: 23
1 DECAL, 2003 Year of Manufacture shown
Position: 23
4 ** BEARING, Nyliner
Position: 23
2 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
Position: 24
2 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5
Position: 24
3 PLUG, 5/16” Square Hole used on Push models; (only one
Position: 24
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 Was 90005 (used on Self-
Position: 24
4 SCREW, #10-32 x 1/4” Self-Tap Machine
Position: 24
4 GEAR, Pinion (12 tooth)
Position: 24
1 DECAL, Chute/Deflector Warning
Position: 24
1 ** SET SCREW, 5/16-18 x 1/4” slotted headless cup point
Position: 24
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
Position: 25
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5
Position: 25
3 PLUG, 5/16” Round Hole qty. 3 on Push, qty. 2 on Self-
Position: 25
1 WASHER, 1/4” Internal Tooth Lock Was
Position: 25
1 SHIELD, Hex Shaft used on Self-Propelled Euro
Position: 25
4 SPACER, Pinion Gear
Position: 25
1 DECAL, Noise (European)
Position: 25
2 WASHER, 1/2” Flat
Position: 25
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was 91026 (used on All)
Position: 26
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Position: 26
1 WASHER, 5/16” Flat used on Euro models
Position: 26
BALL JOINT, 1/4-28 used on Self-Propelled Euro
Position: 26
4 SHAFT, Pinion
Position: 26
1 DECAL, OPEI
Position: 26
1 DECAL, Adjustment
Position: 26
10 NUT, 5/16-18 Hex Flange Lock GR5 Was 91070 (used on All)
Position: 27
10 NUT, 5/16-18 Hex Flange Lock GR5
Position: 27
2 WASHER, 7/16” Flat used on Euro models
Position: 27
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro
Position: 27
4 NUT, #10-32 Hex Nyloc only 1 shown
Position: 27
1 DECAL, Caution Tag not used in 2003 model year
Position: 27
1 DECAL, Thatcherizer
Position: 27
1 BRACKET, Speed Control Rod used on Self-Propelled
Position: 28
1 NUT, 5/16-24 Hex Center Lock GR5
Position: 28
1 COVER, Belt used on Euro models
Position: 28
1 LINK, Transfer used on Self-Propelled Euro
Position: 28
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
Position: 28
2 WIRE TIE, 1.29” Long (Black) used on All
Position: 29
1 CLIP, Cable/Wiring
Position: 29
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
Position: 29
1 WASHER, 3/4” Shim
Position: 29
1 HOUSING, Left
Position: 29
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 Was 91189 (used on All)
Position: 30
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2
Position: 30
1 BUSHING used on Euro models
Position: 30
3 WASHER, 3/8” Internal Tooth Lock
Position: 30
3 GASKET, 5/8” O. D.
Position: 30
4 T-KNOB, 5/16-18 (BLACK) used on All
Position: 31
4 T-KNOB, 5/16-18 (BLACK)
Position: 31
1 WASHER, 3/8” Flat
Position: 31
1 LEVER, Speed Control used on Self-Propelled
Position: 32
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5
Position: 32
3 NUT, 3/8-24 Hex, GR B Was
Position: 32
4 WASHER, 5/16” Internal Tooth Lock used on All
Position: 33
3 WASHER, 1/4” Internal Tooth Lock
Position: 33
1 NUT, 5/16-18 Hex GR5 or B Was 90196 (continued on next
Position: 33
1 NUT, 1/4-28 Hex GR5 or B used on All
Position: 34
3 NUT, 1/4-20 Hex GR5 or B
Position: 34
1 WASHER, 5/16” Split Lock
Position: 34
1 FOAM GRIP, .84 I.D. x 11” long Was 73115 (Used on All)
Position: 35
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All except MR216517
Position: 35
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 Was
Position: 35
2 BUSHING used on All
Position: 36
2 BUSHING
Position: 36
1 CONNECTOR, Transfer Rod
Position: 36
1 PIN, Clutch Handle used on Self-Propelled
Position: 37
1 PIN, Clutch Handle used on Self-Propelled
Position: 37
1 WASHER, Flat 1/4" (European Models Only) used on Self-Propelled Euro
Position: 37
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
Position: 38
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
Position: 38
1 BUSHING
Position: 38
1 DECAL, Blade Control (Right Hand Side) used on all (except Euro)
Position: 39
1 SPRING, Wheel Drive
Position: 39
1 GUIDE, Rope used on All
Position: 40
2 GUIDE, Rope used on All except MR216517
Position: 40
1 GUIDE, Thrust Plate (3/8-24 thread)
Position: 40
1 CLAMP, 7/8” Double Cable used on All
Position: 41
1 FOAM GRIP, .84 I.D. x 11” long
Position: 41
1 RETAINER, 3/8” Bolt
Position: 41
1 NUT, 5/16-24 Hex Center Lock GR5 Was 91074 (used on All)
Position: 42
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was
Position: 42
1 DECAL, Shift Warning used on Self-Propelled
Position: 43
1 CLAMP, Casing used on All except MR216517
Position: 43
1 DISC, Driven (Cantilever)
Position: 43
3 NUT, 1/4-20 Hex Was 91100 (used on All)
Position: 44
4 WASHER, 5/16” Internal Tooth Lock
Position: 44
1 BRACKET, Deck Was 31919 (Now 17696 +
Position: 44
3 WASHER, 1/4” Internal Tooth Lock used on All
Position: 45
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, GR5 used on All except MR216517
Position: 45
2 BUSHING, Flange
Position: 45
1 SCREW, 1/4-20 x 1-3/4” Hex Head Cap GR5 Was 91222 (used on All)
Position: 46
1 CLAMP, 7/8” Double Cable
Position: 46
1 SPACER used on Commercial models
Position: 46
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
Position: 47
1 GUIDE, Rope used on Self-Propelled
Position: 48
1 WASHER, 5/16” Internal Tooth Lock
Position: 48
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
Position: 49
1 WASHER, Spring
Position: 49
1 CABLE-TIE, 7” used on Self-Propelled
Position: 50
1 PIN, 3/32 x 1/2” Cotter Was
Position: 50
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
Position: 51
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was
Position: 51
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All except MR216517
Position: 52
3 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Position: 52
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
Position: 53
2 NUT, 5/16-18 Hex Flange Lock, GR5 Was
Position: 53
1 BOLT, 5/16-18 x 1” Square Neck Carriage GR5 used on MRP216517B
Position: 54
1 SPRING, Clutch
Position: 54
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
Position: 55
KIT, Drive Disc Assembly
Position: 56