Explosionszeichnung sn 150 z SNAPPER sn150z
Entdecken Sie die vollständige Explosionszeichnung sn 150 z SNAPPER sn150z – ein unverzichtbarer Leitfaden zur Identifizierung aller Ersatzteile. Unsere Darstellung hilft Ihnen, jede Komponente Ihres sn 150 z zu verstehen. Finden Sie schnell die benötigten Teile für Ihr sn 150 z SNAPPER sn150z.
Reparatur-Assistent
Powered by ChatGPT
Ersatzteilliste
1 SEAT ASSEMBLY, with Arm Rests (Includes Ref. No. 2)
Position: 1
2 NUT, Hex Flange ESNA, 3/8-16
Position: 1
1 SHAFT, Cross
Position: 1
4 CAP, Hub, 1-1/2 ID Gray Poly 1.3 HI
Position: 1
1 DECAL, Snapper
Position: 1
1 ROD, 7-5/8 Long
Position: 1
4 BOLT, Wheel, 3/8-16 x 2-25/32 3/4 Thread
Position: 1
2 NUT, Hex Lock ESNA Light. 5/8-18
Position: 1
4 SWITCH, Push Button
Position: 1
1 ARM REST KIT, (L.H. & R.H.)
Position: 2
2 NUT, Hex Keps, 5/16-18
Position: 2
2 WASHER, 1/2
Position: 2
2 NUT, Hex Lock Pal, 9/16-18 SAE
Position: 2
1 RETAINER, Pin Spring
Position: 2
4 WASHER, 1/2
Position: 2
2 PULLEY, 7”
Position: 2
1 SWITCH ASSEMBLY, Ignition (Includes Ref. Nos. 3, 4, 5 & 6)
Position: 2
2 CAPSCREW, Hex Socket Head, 5/16-18 x 3/4, G8
Position: 3
2 SPACER
Position: 3
2 RING, Klipring Extension
Position: 3
2 WASHER, 3/4, .83 ID x 1.62 OD x .06 THK
Position: 3
1 DECAL, Snapper, 150Z
Position: 3
4 GAUGE WHEEL
Position: 3
2 SPACER, Pulley
Position: 3
1 LOCKWASHER, Internal Tooth, Ignition Switch
Position: 3
12 NUT, Hex Flange ESNA, 1/4-20
Position: 4
2 LOCKWASHER, Spring 5/16
Position: 4
4 CARRIAGE BOLT, 5/16-18 x 1, G5
Position: 4
5 CAPSCREW, Hex Head, 5/16-18 x 1-1/4, G5
Position: 4
2 WHEEL & TIRE ASSEMBLY, Rear
Position: 4
1 DECAL, Snapper Logo
Position: 4
1 ROD, ZTR
Position: 4
4 RETAINING RING, External 1-3/4
Position: 4
1 NUT, Hex Flange, 5/8-32, Ignition Switch
Position: 4
4 CAPSCREW, Hex Head Whiz Lock Dog Point, 5/16-18 x 3/4
Position: 5
1 PIPE, Exhaust B&S Intek
Position: 5
1 ROD, Control, L.H.
Position: 5
6 NUT, Hex Jam, 5/16-18
Position: 5
2 RING, Klipring for 3/4 DIA Shaft
Position: 5
1 DECAL, Operating Instructions ZT Export
Position: 5
1 NUT, Push 1/2 Stud Capped
Position: 5
4 NUT, Hex Flange ESNA, 3/8-16
Position: 5
4 BEARING, Ball
Position: 5
1 COVER, Ignition Switch
Position: 5
1 DECK, Seat
Position: 6
1 GASKET, Exhaust B&S
Position: 6
4 WASHER, 5/16
Position: 6
2 NUT, Speed, 5/16-18 Lug Type
Position: 6
2 WASHER, 3/4, 0.76 ID x 1.62 OD x .12 THK
Position: 6
1 DECAL, Tracking Adjustment ZT
Position: 6
2 NUT, Hex Lock ESNA Light, 3/8-16 NC3B
Position: 6
1 KEYS (Set of Two Keys)
Position: 6
8 SCREW, Truss Head Torx Drive, 1/4-20 x 3/4
Position: 7
4 CAPSCREW, Hex Whiz Lock Flange, 1/4-20 x 5/8
Position: 7
1 HYDRO SEAL KIT
Position: 7
15 NUT, Hex Flange, 5/16-18 ESNA
Position: 7
2 WHEEL & TIRE ASSEMBLY, Front
Position: 7
1 DECAL, Ignition Switch Symbols White/Black
Position: 7
2 LUBE FITTING, 1/4 Drive w/Check Ball
Position: 7
1 METER, Hour Digital with Oil & Lube Alarms
Position: 7
2 NUT, Hex Flange Whiz Lock, 5/16-18 Large
Position: 8
2 BOLT, Shoulder, 7/16-14, G5
Position: 8
2 VALVE STEM & CAP
Position: 8
2 DECAL, Transmission Tow with Release Lever Hunter
Position: 8
2 SPACER
Position: 8
2 SHAFT, Spindle
Position: 8
1 PLUG, Hole
Position: 8
3 RIVET, Pop
Position: 9
1 ROD, Control, R.H.
Position: 9
2 CLIP, Brake
Position: 9
2 LUBE FITTING
Position: 9
1 DECAL, 1 2 3 4 HOC
Position: 9
4 WASHER, 3/8
Position: 9
3 STRAP
Position: 9
1 HOUSING, 42”
Position: 9
1 SWITCH, PTO Push/Pull
Position: 9
1 SCREEN, Seat Deck
Position: 10
12 NUT, Hex Lug, 7/16-20
Position: 10
2 DECAL, Danger Rotating Blade
Position: 10
2 CAPSCREW, Hex Head 3/8-16 x 1-1/4, G8
Position: 10
8 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
Position: 10
2 WASHER, Spindle Blade, Powdered Metal
Position: 10
4 TIE, Self Locking
Position: 10
6 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
Position: 11
1 SPACER
Position: 11
2 CAPSCREW, Hex Head, 7/16-14 x 8, G5
Position: 11
8 CARRIAGE BOLT, 5/16-18 x 1, G5
Position: 11
7 NUT, Hex Whiz Lock Flange, 5/16-18
Position: 11
1 NUT, Hex Flange, 5/16-18 Collar Lock
Position: 11
1 SWITCH, Push Button, Seat Switch
Position: 11
1 CAPSCREW, Hex Head, 5/16-18x 1-1/4, G5
Position: 12
4 WASHER, 7/16
Position: 12
2 CARRIAGE BOLT, 5/16-18 x 1-3/4, G5
Position: 12
1 NUT, Hex Flange Two-Way Lock, 5/16-18
Position: 12
1 CAM, Eccentric 1-1/8 A/F Hex
Position: 12
4 WASHER, Belleville, 1-3/4
Position: 12
1 BRACE, Battery
Position: 12
1 MUFFLER, B&S
Position: 13
1 TRANSMISSION, Hydro Gear, L.H.
Position: 13
1 CARRIAGE BOLT, 5/16-18 x 1-1/4, G5
Position: 13
2 NUT, Hex, 9/16
Position: 13
1 STRAP, Black
Position: 13
1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2, G5
Position: 14
2 NUT, Hex Flange, 7/16-14, Two-Way Lock
Position: 14
4 LOCKWASHER, Spring, 5/16
Position: 14
6 CARRIAGE BOLT, 5/16-18 x 3/4, G5
Position: 14
2 CAPSCREW, Hex Head 3/8-16 x 1, G5
Position: 14
1 BATTERY, 12 Volt, 6 Cell, 340 Amps
Position: 14
8 NUT, Hex Flange Whiz Lock, 5/16-18
Position: 15
4 SCREW, Truss Head Torx Drive, 5/16-18 x 7/8
Position: 15
2 NUT, Hex Flange Whiz Lock, 3/8-16
Position: 15
2 LOCKWASHER, Spring 3/8
Position: 15
2 CAPSCREW, Hex Head, 1/4-20 x 3/4, G5
Position: 15
4 CAPSCREW, Hex Washer Head, #10 x 1/2
Position: 16
7 NUT, Hex Flange, 5/16-18 ESNA
Position: 16
6 WASHER, 5/16
Position: 16
6 NUT, Hex Flange Whiz Lock, 5/16-18
Position: 16
2 WASHER, 1/4
Position: 16
10 CAPSCREW, Hex Head Whix Lock, 5/16-18 x 3/4, G5
Position: 17
1 CONTROL, Throttle Double 42” Long
Position: 17
2 CLAMP, Saddle Snow Handle, E-Coat
Position: 17
2 SUPPORT, 1-1/4 Long
Position: 17
2 LOCKWASHER, Spring, 1/4
Position: 17
2 TIE, Self-Locking 3-5/8 Long
Position: 18
4 CAPSCREW, Hex Head, 5/16-18 x 2-3/4, G5
Position: 18
1 SPACER, Powdered Metal
Position: 18
1 CARRIAGE BOLT, 5/16-18 x 1-1/4, G5
Position: 18
6 CARRIAGE BOLT, 5/16-18 x 3/4, G5
Position: 18
2 NUT, Hex, 1/4-20
Position: 18
2 BUMPER, Rubber
Position: 19
1 HOSE, Oil Drain 16-1/2 Long
Position: 19
2 GRIP, Foam Handle
Position: 19
2 PULLEY, Idler 4”
Position: 19
1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x
Position: 19
10 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4
Position: 19
1 BOOT, Insulator
Position: 19
1 CAPSCREW, Hex Head Whiz Lock, 5/16-18 x 1-1/2, G5
Position: 20
3 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 1-1/2
Position: 20
1 ROD, Actuator, R.H. E-Coat
Position: 20
1 CAPSCREW, Hex Head 3/8-16 x 2-1/4, G5
Position: 20
1 NUT, Hex Adjusting, .99 DIA .687 TH Powdered Metal
Position: 20
1 SPRING, Torsion
Position: 20
1 CABLE, #6 x 10, 2 Ring Terminals
Position: 20
4 NUT, Push
Position: 21
1 PULLEY, 3-3/4
Position: 21
1 CLIP, Rod End Clevis L.H.
Position: 21
1 CAPSCREW, Hex Head, 3/8-16 x 2-3/4, G5
Position: 21
1 NUT, Hex Toplock Spiral-Lock Flange, 3/8-16
Position: 21
1 DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted
Position: 21
1 CABLE, #6 x 15, 2 Ring Terminals
Position: 21
1 CAP, Fuel Tank
Position: 22
1 KEY, HI-PRO, 1/4 x 1/4
Position: 22
2 CAPSCREW, Hex Head, 1/2-13 x 1-1/4, G5
Position: 22
4 CAPSCREW, Hex Head, 5/16-18 x 1-1/2, G5
Position: 22
1 SPACER
Position: 22
2 NUT, Hex Flange Two-Way Lock, 1/2-13
Position: 22
1 ROD, Deflector
Position: 22
1 CABLE, #6 x 15, 2 Ring Terminals
Position: 22
1 CLUTCH, # 504586, Electric, OGURA JD-11
Position: 23
1 SPACER
Position: 23
2 SHOCK ABSORBER
Position: 23
1 WASHER, 3/8 Black
Position: 23
1 WASHER, 5/8
Position: 23
2 NUT, Push Pal, 3/8
Position: 23
3 COVER, Terminal
Position: 23
1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1-1/2
Position: 24
1 WASHER, Special Hex
Position: 24
1 ROD, Actuator, L.H.
Position: 24
1 Spring, Extension 7-7/8 Long
Position: 24
1 BREAKER, Circuit, 12 Volt, 20 Amps with Tab
Position: 24
3 WASHER, 5/16
Position: 25
1 LOCKWSHER, Spring, 7/16
Position: 25
1 SPRING, Extension
Position: 25
4 NUT, Hex Lock ESNA Light, 5/16-18NC-3B
Position: 25
1 BELT, HA 103.1 Long
Position: 25
12 CARRIAGE BOLT, 5/16-18 x 3/4, G5
Position: 25
1 WIRE, 12 GA
Position: 25
1 SPACER
Position: 26
1 CAPSCREW, Hex Head, 7/16-20 x 2-3/4, G5
Position: 26
1 WASHER, 5/16
Position: 26
12 NUT, Hex Flange Whiz Lock, 5/16-18
Position: 26
1 SOLENOID, 4 Pole, 12 Volt DC
Position: 26
1 BUSHING, Fuel Tank
Position: 27
1 CAPSCREW, Hex Head, 3/8-16 x 2-1/4, G5
Position: 27
4 SPACER, Powdered Metal
Position: 27
2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2, G5
Position: 27
1 ELBOW, with Screen, Gas Tank to Fuel Line
Position: 28
1 WASHER, 5/16
Position: 28
1 GEAR, Parking Brake, Transmission
Position: 28
2 CARRIAGE BOLT, 5/16-18 x 2-1/4, G5
Position: 28
1 PIN, Spring SAE
Position: 28
2 LOCKWASHER, External Tooth
Position: 28
2 CLAMP, Hose, Wire Type E
Position: 29
1 CLIP, E Transmission Parking Brake
Position: 29
8 NUT, Hex Flange Whiz Lock, 5/16-18
Position: 29
1 WASHER, Detent
Position: 29
2 NUT, Hex, 5/16-24
Position: 29
1 HOSE, Fuel 8.5” Long
Position: 30
7 WASHER, 5/16
Position: 30
1 TRUNNION
Position: 30
1 HARNESS, Wiring
Position: 30
1 PAD, Footrest, R.H.
Position: 31
1 WASHER, 1/2
Position: 31
1 CLIP, Cable
Position: 31
1 PAD, Footrest, L.H.
Position: 32
1 WASHER, 3/8 x .08 THK
Position: 32
1 SPACER, Powdered Metal
Position: 32
1 SPACER, Split
Position: 32
4 CAPSCREW, Hex Washer Head Taptite, #10 x 1/2
Position: 32
1 CAPSCREW, Hex Head, 1/2-13 x 1-1/2, G5
Position: 33
1 RETAINER, Clutch
Position: 33
1 PULLEY, Idler
Position: 33
1 TRUNNION
Position: 33
1 NUT, Hex Flange Whiz Lock 3/8-18
Position: 33
1 WASHER, 7/16 x 1/4 THK
Position: 34
1 KIT, Breather 60 Degree Elbow
Position: 34
4 BUSHING
Position: 34
1 SPACER
Position: 34
1 WASHER, External Tooth, 3/8
Position: 34
1 ARM, Caster, L.H.
Position: 35
1 SEAL, Foam Air Duct
Position: 35
1 KIT, Breather 90 Degree Elbow
Position: 35
1 SPRING, Compression
Position: 35
1 INDICATOR, Height of Cut
Position: 35
2 WASHER, 5/16
Position: 35
2 RING, E-Retaining
Position: 36
5 CAPSCREW, Hex Head, 5/16-18 x 2-1/2, G5
Position: 36
1 KNOB, Extension Thread, 5/16-18 x 1-1/4
Position: 36
1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x
Position: 36
2 CAPSCREW, Hex Head 5/16-18 x 1-1/2, G5
Position: 36
4 WASHER
Position: 37
1 INSULATION SHIELD, Top Muffler
Position: 37
1 SPACER
Position: 37
1 BUSHING, Powdered Metal
Position: 37
1 CRANK, Height Adjustment
Position: 37
1 WIRING ASSEMBLY, Jumper All Conditions Shut-Down
Position: 37
4 BUSHING
Position: 38
4 NUT, Hex Whiz Lock Flange, 3/8-16
Position: 38
1 BRACKET, Pivot
Position: 38
1 KNOB, Spinner
Position: 38
2 LUBE FITTING, 1/4 Drive w/Check Ball
Position: 39
2 NUT, Hex Flange, 1/2-13, Two-Way Lock
Position: 39
1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4, G5
Position: 39
1 NUT, Push Pal, 3/8
Position: 39
1 ARM, Caster, R.H.
Position: 40
1 NUT, Push Pal, 5/16 x 5/8
Position: 40
2 WASHER, 1/2
Position: 40
4 PIN, Quick
Position: 40
3 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
Position: 41
1 TRANSMISSION, Hydro Gear, R.H.
Position: 41
2 WASHER, 1/4
Position: 41
1 CARRIAGE BOLT, 3/8-16 x 1-1/2, G5
Position: 41
1 CAPSCREW, Hex Head, 5/16 - 18 x 3/4
Position: 42
1 V-BELT
Position: 42
1 ROD, Pivot
Position: 42
2 NUT, Speed Lug Type, 1/4-20
Position: 43
3 WASHER, 3/8
Position: 43
1 ROD, 1/4-20 x
Position: 43
1 NUT, Hex FlangeTwo-Way Lock, 3/8-16 GA
Position: 43
2 NUT, Hex Flange Whiz Lock, 1/4-20
Position: 44
2 NUT, Hex Centerlock Jam, 7/16-14
Position: 44
1 SPRING, Extension
Position: 44
1 SPACER
Position: 44
1 NUT, Hex Flange Two-Way Lock, 1/2-13
Position: 45
1 CLIP, Rod End Clevis R.H.
Position: 45
3 WASHER, 3/8
Position: 45
1 SPACER
Position: 46
1 NUT, Hex Head Center Lock
Position: 46
1 SPRING, Compression
Position: 46
1 SPACER
Position: 46
1 PULLEY, 4.5”, Transmission
Position: 47
1 NUT, Hex Flange, 1/4-20 ESNA
Position: 47
1 CAPSCREW, Hex Head 3/8-16 x 2, G5
Position: 47
2 NUT, Push, 1/4
Position: 48
1 FAN, 6”, Transmission
Position: 48
2 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
Position: 48
2 CAP, Hub
Position: 49
1 CAPSCREW, Hex Head, Transmission
Position: 49
2 CARRIAGE BOLT, 1/4-20 x 3/4
Position: 50
1 PARKING BRAKE ARM ASSEMBLY, Transmission L.H. or R.H.
Position: 50
2 HUB REPLACEMENT KIT
Position: 51
1 PAD, Footrest, Front
Position: 52
2 HUB, EZT Transmissions
Position: 52
8 NUT, EZT Transmissions
Position: 53
2 SPACER
Position: 54
2 SPACER
Position: 55
2 PIVOT, Hood
Position: 56
2 PIN, Quick
Position: 57
2 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x
Position: 58
4 NUT, Speed Lug Type, 5/16-18
Position: 59
6 SCREW, Hex Flange Whiz Lock, 1/4-20 x 5/8
Position: 60
1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 1-1/4, G5
Position: 61
1 LOCKWASHER, External Tooth, 3/8
Position: 62
1 WASHER, 3/8 x 1-1/4 x 1/4
Position: 63
1 TANK, Fuel
Position: 64
1 TIE, Self-Locking
Position: 66
1 LITERATURE PACK (Not shown) (Includes Operator's Manual
Position: 1734233