Repair Assistant
Powered by ChatGPT
Spare Parts List
4 BEARING, TAPERED ROLLER,
Position: 1
1 TANK, FUEL, LH, EVOLUTION
Position: 1
1 PICKUP TUBE ASM, FUEL TANK, 18.38" (SV)
Position: 1
1 SWITCH, IGNITION, 6 POST
Position: 1
4 BEARING, IDLER
Position: 1
2 BALL JOINT, 5/16-24, FEMALE
Position: 1
1 FILTER, OIL
Position: 1
2 CAM BRAKE SHOE ASSM, KNOTT
Position: 1
1 SPRING, EXTENSION
Position: 1
8 NUT, 1/2-20, FOR WHEEL BOLT SILVER
Position: 1
2 DECAL, EVO, REAR CHARIOT
Position: 1
1 DECAL, MAIN SAFETY, LH, CE
Position: 1
1 DECAL, MAIN SAFETY, EVOLUTION
Position: 1
11 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 1
1 BELT, BP-SEC, 91.12EL, ARAMID, WRPD
Position: 1
2 GREASE FITTING, 1/4-28 STRAIGHT
Position: 1
1 STRAP-BLACK RUBB
Position: 1
2 SEAL, GREASE
Position: 2
1 TANK, FENDER, RH, EVOLUTION
Position: 2
1 KIT, BUSHING, FUEL (SV)
Position: 2
1 SWITCH, BLADE ENGAGEMENT
Position: 2
1 GROMMET, 7/8
Position: 2
2 SNAP RING, INTERNAL
Position: 2
4 BEARING, BRONZE FLANGE, 3/4"
Position: 2
4 FITTING, #8 JIC - #10 O-RING, 45 DEG.
Position: 2
6 WASHER, 5/16 SAE
Position: 2
2 BUMPER, RUBBER 1/4-20
Position: 2
2 SPRING-COMP, .496ID X 3.00LG X .112WR
Position: 2
4 BALL JOINT, 1/2-20, MALE
Position: 2
1 DECAL, BADGE, EVO, RH
Position: 2
1 DECAL, MAIN SAFETY, RH, CE
Position: 2
1 DECAL, MAIN SAFETY, EVOLUTION (SP)
Position: 2
2 SPACER, .39 X 1.00 X .25
Position: 2
2 WASHER, 5/8 USS
Position: 2
2 HANGER, FRONT DECK - 2 LINK (36" MODEL ONLY)
Position: 2
3 BLADE, 16.25
Position: 2
2 PULLEY-IDLER-V, 4.85OB, .506ID, .94W,STL
Position: 2
1 SOLENOID-4 POLE 12 VOLT DC (TROMBETTA)
Position: 2
1 PIVOT BEARING-1.00 X 1.125 ODX1.50
Position: 3
1 CAP, GASOLINE, VENTED
Position: 3
4 CLAMP, HOSE, EXTERNAL, 1/2 - RED
Position: 3
1 RING, SWITCH RETAINER
Position: 3
1 ADAPTER-OIL DRAIN
Position: 3
2 INSERT, BEARING, 17MM X 12MM L
Position: 3
2 ADJUSTER, ROD LINKAGE 5/16-24
Position: 3
2 FITTING, TEE, 1/2 HOSE
Position: 3
7 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 3
2 WASHER, 1/4 SAE
Position: 3
2 BEARING, BRONZE FLANGE, 3/4"
Position: 3
6 BUSHING, 1.00 X 1.13 X 1.38, PLASTIC
Position: 3
1 DECAL, BADGE, EVO, LH
Position: 3
2 DECAL, DANGER, MOWER DECK, ANSI EXP
Position: 3
1 DECAL, DANGER, MOWER
Position: 3
2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT
Position: 3
2 ASSM, SPINDLE, BLADE SADDLE
Position: 3
1 SPRING, COMPRESSION 2 MEDIUM
Position: 3
4 BUSHING, FLANGE
Position: 3
2 SHOCK, SPRING ASSEMBLY
Position: 4
2 FLAP, RUBBER, SPLASH GUARD
Position: 4
1 MODULE, TIME DELAY
Position: 4
1 BOLT, CRANKSHAFT, 7/16 X 2-1/2
Position: 4
1 BOLT, CRANKSHAFT, 7/16 X 2-1/2
Position: 4
2 KEY, 5MM SQ. W/ RADIUS
Position: 4
2 WELD, CONTROL RAMP (S/N: 2013947484 & BELOW)
Position: 4
1 FILTER HEAD, HYDRAULIC
Position: 4
8 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 4
1 GRIP, BLACK FLEXIBLE
Position: 4
4 NUT, 1/2-20 HEX JAM
Position: 4
2 CASTER AXLE DDSH
Position: 4
1 DECAL, FERRIS, FRONT, 8.78 X 5.81
Position: 4
1 DECAL, DANGER DISCHARGE ANSI EXPORT
Position: 4
1 DECAL, DANGER, MOWER DISCHARGE,8.75X2.13
Position: 4
1 SPACER, 1.00 X 3.25 THRD BOTH ENDS
Position: 4
8 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 4
1 PULLEY-6.33 OD. X .98 BORE X 1.53 HEIGHT
Position: 4
12 BOLT, 5/16-18 X 1 1/4 FLANGE
Position: 4
2 PULLEY, 5.72., 48 DECK
Position: 4
2 BOLT-WHEEL 3/8-16X2.781 .750 THRD YELLOW
Position: 4
2 SWITCH, PLUNGER, N.O.
Position: 4
4 WASHER, 3/4 SAE
Position: 5
7 WASHER, 5/16 SAE
Position: 5
1 PLUG, .820X1.44 HOLE, BLACK PLASTIC
Position: 5
1 SPACER, 1.13 X 1.75 X .62
Position: 5
1 WASHER, .41 X 1.75 X .14
Position: 5
2 CABLE, PUSH/PULL, 30", SPEED CONTROL (S/N: 2013952387 & BELOW)
Position: 5
4 ADAPTER, 90 DEG, 9/16-3/8 BARB
Position: 5
8 SPACER, .52 X 1.00 X 2.625, YZ
Position: 5
2 BRAKE DRUM
Position: 5
2 WASHER, 5/8 SAE
Position: 5
2 BALL JOINT, 1/2-20, MALE
Position: 5
2 TIRE/WHEEL ASSM 11/4.00-5 FLAT FREE
Position: 5
1 DECAL, EVOLUTION, LOGO
Position: 5
1 DECAL, THROTTLE CONTROL
Position: 5
1 SHOCK ABSORBER
Position: 5
1 DECK SHELL W/ DECALS, 36, EVOLUTION
Position: 5
2 NUT, 3/8-16 HEX JAM (36" MODEL ONLY)
Position: 5
1 PULLEY-IDLER, 5.00OD, .385ID, 1.50W STL
Position: 5
1 PULLEY-IDLER, 5.00OD, .385ID, .75W, STL
Position: 5
4 WASHER-0500(0.51IDX0.87ODX.06THK) BLK
Position: 5
1 DECK SHELL W/ DECALS, EVOLUTION, 36 - RED
Position: 5
2 RELAY, 12V, 40A
Position: 5
1 NUT, 3/4-16 HEX NYLON LOCK
Position: 6
2 WASHER, 3/8 SAE
Position: 6
1 HOUR METER
Position: 6
1 HOSE, OIL DRAIN
Position: 6
1 BELT, SPROCKET DRIVE
Position: 6
4 ROD END, FEMALE, 10-32 W 5/16" BORE
Position: 6
4 FITTING, #8 JIC - #8 O-RING, 45 DEG.
Position: 6
6 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 6
2 HUB-W/STUD, 1TPR
Position: 6
1 NUT, 5/8-11 HEX JAM NYLON LOCK
Position: 6
2 CLEVIS, 1/2-20, STEEL
Position: 6
1 DECAL, iCD CUTTING SYSTEM (52" MODELS ONLY)
Position: 6
1 DECAL, IGNITION SWITCH
Position: 6
2 NUT, 1/4-20 HEX NYLON LOCK
Position: 6
12 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 6
12 WASHER, 3/8 SAE
Position: 6
2 NUT, 3/4-16 HEX
Position: 6
4 WHEEL- 2.00 WIDE 3.88 DIA 0.531ID POLY
Position: 6
18 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 6
1 SWITCH, PLUNGER, NO/NO BOLT-ON
Position: 6
2 NUT, 3/4-16, HEX JAM NYLON LOCK
Position: 7
1 WASHER, 5/16 LOCK YZ
Position: 7
2 O-RING, 7/8 ID X 1/16 W
Position: 7
1 CLUTCH,5218-134, WARNER
Position: 7
1 SPROCKET, 44T X 1.125 BORE, EAGLE PD
Position: 7
1 TANK, HYDRAULIC, ASSEMBLY (Includes Ref Nos 38 - 41).
Position: 7
1 TANK, HYDRAULIC, ASSEMBLY (Includes Ref Nos 38 - 41)
Position: 7
2 ROD, BRAKE LINKAGE
Position: 7
2 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 7
2 WHEEL, REAR, 18 X 8.5 X 10 (36" Models Only)
Position: 7
1 DECAL, 36 (36" MODELS ONLY)
Position: 7
1 DECAL, OIL RESEVOIR
Position: 7
1 DECAL, OIL RESEVOIR (ON MOUNTING PLATE INSIDE FENDER)
Position: 7
8 BOLT, 5/16-18 X 1 1/4 FLANGE
Position: 7
2 WASHER, 3/4 BELLEVILLE
Position: 7
2 SPACER, .51 X .75 X .56
Position: 7
1 CLAMP, 5/16, DOUBLE, WIRE & TUBE
Position: 7
4 WASHER, BELLEVILLE - 1.500 X .755
Position: 8
6 SCREW, #10-24 X 3/8 ALLEN BHBZ
Position: 8
14 BODY CLIP, 1/4-20 X 1/2 DEEP
Position: 8
4 BOLT,HEX FLG, SER GD5 3/8-16X1-1/4,PATCH
Position: 8
2 SPROCKET, 44T X .591 BORE, EAGLE PD
Position: 8
1 CAP, HYDRAULIC, SHIELDED VENT
Position: 8
8 SPACER, .50 X 1.00 X 2.00
Position: 8
6 COLLAR, 3/8 SET
Position: 8
3 BOLT, 3/8-16 X 3/4, GD5, YZ WITH PATCH
Position: 8
1 DECAL, 48 (48" MODELS ONLY)
Position: 8
1 DECAL, CZT HYRDO RELEASE
Position: 8
1 DECAL, CZT HYDRO RELEASE
Position: 8
1 KNEE PAD, INNER RH, EVOLUTION 36"/48" (36" Models: All; 48" Models: S/N:
Position: 8
2 NUT, 1/2-13 HEX
Position: 8
2 SPROCKET, GOODYEAR EAGLE PD
Position: 8
3 WASHER, 5/8 USS
Position: 8
4 SPACER, .38 X .50 X 1.25
Position: 8
1 BATTERY CABLE, POSITIVE,
Position: 8
1 BATTERY CABLE, POSITIVE, 15"
Position: 8
2 BOLT, 1/4-28 X 1/2, GD5 YZ
Position: 9
1 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 9
1 MUFFLER, 27HP KAWASAKI, EVOLUTION (S/N: 2013821874 & ABOVE)
Position: 9
1 KIT, MUFFLER & DECK GUARD, EVO (S/N: 2013821873 & BELOW)
Position: 9
1 MUFFLER
Position: 9
2 BODY CLIP, 1/4-20 X 1/2 DEEP
Position: 9
2 HOSE ASM,RH
Position: 9
2 HOSE ASM, RH
Position: 9
2 BALL JOINT, 5/16-24 FEM, STUD.
Position: 9
1 BALL JOINT, 5/16-24, LH FEMALE
Position: 9
2 SPRING, DECK LIFT ASSIST
Position: 9
1 DECAL, 52 (52" MODELS ONLY)
Position: 9
1 DECAL, MAIN, CE
Position: 9
1 DECAL, MOTION CONTROL GUARD, EVOLUTION
Position: 9
1 KNEE PAD, INNER LH, EVOLUTION 36"/48" (36" Models: All; 48" Models: S/N:
Position: 9
1 ROD, 5/16 X 13.75, TBE
Position: 9
1 SPACER, 1.00 X 1.57 X 2.19
Position: 9
20 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 9
1 WASHER, .390 X 1.38 X .109, YZ
Position: 9
1 BATTERY CABLE, NEGATIVE, 22"
Position: 9
1 SPACER, .75 X 1.00 X 2.38
Position: 10
2 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 10
1 NUT, 3/8-24 HEX JAM
Position: 10
2 WASHER, .265 X 1.50 X .109, YZ
Position: 10
8 NUT, 3/8-16 HEX NYLON LOCK
Position: 10
2 HOSE ASM,LH, LH PUMP PORT BOT MOTOR PORT
Position: 10
1 HOSE ASM,LH, LH PUMP PORT BOT MOTOR PORT
Position: 10
12 CAPSCREW-HEX HEAD M6-1.0X 14MM
Position: 10
1 SPACER, .39 X .63 X 1.00
Position: 10
1 DECAL, PINCH POINT, CE
Position: 10
1 DECAL, DECK HEIGHT, EVOLUTION, 36" (36" MODELS ONLY)
Position: 10
1 KNEE PAD, OUTER RH, EVOLUTION 36"
Position: 10
1 BOLT, 5/16-18 X 3/4 FLANGE
Position: 10
1 WIRE HARNESS, MAIN, EVO
Position: 10
1 WIRE HARNESS, MAIN, EVO 48 (48" MODELS)
Position: 10
1 PIVOT BEARING, 1.00 X 1.125 OD X .50
Position: 11
2 SPACER, .20 X .38 X 1.25
Position: 11
2 WASHER, 1/4 LOCK
Position: 11
1 OIL COOLER, .75 X 11.0 X 24 PLATES
Position: 11
1 BUMPER, RUBBER 5/16-18
Position: 11
2 NUT, 5/16-24 JAM
Position: 11
2 NUT, 1/2-20 HEX NYLON LOCK
Position: 11
4 BEARING, RETAINER
Position: 11
1 DECAL, FUSE LOCATION, EVOLUTION
Position: 11
1 DECAL, FUSE LOCATION (UNDER INSTRUMENT CONTROL PANEL)
Position: 11
1 KNEE PAD, OUTER LH, EVOLUTION 36"
Position: 11
1 CHUTE, DISCHARGE, RUBBER
Position: 11
2 HANGER, FRONT DECK - 3 LINK (48" MODEL ONLY)
Position: 11
1 SPACER, .52 X 1.00 X 1.15
Position: 11
1 CHUTE, DISCHARGE, RUBBER
Position: 11
2 CAP, CASTER SPINDLE, LOW PROFILE
Position: 12
1 MANIFOLD, EXHAUST
Position: 12
1 MANIFOLD, EXHAUST
Position: 12
2 CAPSCREW-HEX HEAD M6-1.0X 14MM
Position: 12
8 WASHER, 1/4 SAE
Position: 12
1 HOSE, OIL SUPPLY, RES-FILTER
Position: 12
2 NUT, 5/16-24 HEX NYLON LOCK
Position: 12
1 NUT, 5/16-24 HEX NYLON LOCK
Position: 12
3 WASHER, .390 X 1.38 X .109, YZ
Position: 12
2 WASHER, 1/2 USS
Position: 12
2 TIRE/WHEEL ASM, 22X10.00 - 10 TURF MASTE (48" & 52" Models Only)
Position: 12
1 DECAL, DECK HEIGHT, EVOLUTION
Position: 12
1 DECAL, DECK HEIGHT, EVOLUTION, 48"
Position: 12
2 KNEE PAD, CENTER, EVOLUTION 36"/48" (36" Models: All; 48" Models: S/N:
Position: 12
3 SHIELD, PULLEY BEARING
Position: 12
3 ASSM, SPINDLE, LOW PROFILE
Position: 12
7 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 12
1 SPACER, .39 X 1.00 X 1.47, YZ
Position: 13
10 WASHER, 5/16 SAE
Position: 13
2 WHEEL MOTOR, HGM-15P-7131
Position: 13
2 NUT, 3/8-16 HEX NYLON LOCK
Position: 13
2 NUT, 3/8-16 HEX SIDE LOCK
Position: 13
2 GUIDE, DECK - TWR
Position: 13
8 WASHER, 3/8 SAE
Position: 13
1 DECAL, HAND IN FLAME
Position: 13
1 DECAL, WARNING, HOT
Position: 13
1 SAFETY WALK, EVOLUTION 36"
Position: 13
1 SPACER, 1.00 ID X 1.50 OD X .63 LG. YZ.
Position: 13
1 CHUTE, DISCHARGE, RUBBER, 44/48/52
Position: 13
3 NUT, 3/4-16 HEX
Position: 13
8 WASHER-3/8 FENDER
Position: 14
4 WASHER, 5/16 SAE
Position: 14
1 WASHER, 3/8 SAE
Position: 14
2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
Position: 14
4 WASHER, .390 X 1.50 X 1.09, YZ
Position: 14
6 NUT, 1/4-20 HEX NYLOCK FLANGE
Position: 14
1 PUMP, 12CC-LH, HYDRO-GEAR
Position: 14
1 PIVOT, DECK LIFT
Position: 14
2 STAINLESS STEEL COMP. SPRING
Position: 14
3 WASHER, 3/4 BELLEVILLE
Position: 14
1 BATTERY CABLE, POSITIVE,
Position: 14
4 SCREW, 5/16-18 X 1 FLAT HD SC
Position: 15
1 CABLE, THROTTLE, 31"
Position: 15
3 WASHER, 5/16 INT. TOOTH LOCK
Position: 15
3 BOLT, M8-1.25 X 20MM GD8.8
Position: 15
1 BOLT, M8-1.25 X 20MM GD8.8
Position: 15
3 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 15
4 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 15
8 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 15
1 PUMP, 12CC-RH, HYDRO-GEAR
Position: 15
10 WASHER, 3/8 SAE
Position: 15
7 WASHER, 3/8 SAE
Position: 15
2 BUSHING, SLEEVE, 1.00 X 1.25 X .75
Position: 15
2 BUMPER, RUBBER 5/16-18
Position: 15
2 BUSHING, FLANGE
Position: 15
2 EYE BOLT, 3/8-16 X 4, 2 1/8 OF THREAD
Position: 15
4 NUT, 5/16-18 HEX NYLON LOCK
Position: 16
1 CABLE, CHOKE CONTROL, 35.25"
Position: 16
4 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 16
1 SCREEN, SPARK ARRESTER (NOT SHOWN)
Position: 16
1 EYE BOLT, 5/16-18 X 2-3/4 THRD.
Position: 16
1 EYE BOLT, 3/8-16 X 4, 2 1/8 OF THREAD
Position: 16
4 WASHER, .390 X 1.50 X .109, YZ
Position: 16
2 CLAMP, #10 HOSE, STAINLESS
Position: 16
12 WASHER, 1/4 LOCK
Position: 16
1 WASHER, THRUST, .63 X 1.13 X .06
Position: 16
2 BUSHING, 1.00 X 1.13 X 1.38, PLASTIC
Position: 16
1 WASHER, 5/8 USS
Position: 16
2 WASHER, .53 X 1.50 X .25
Position: 16
1 DISCHARGE CHUTE ASSEMBLY (Includes Ref No. 10 - 15)
Position: 16
1 SWITCH, PLUNGER, NO/NC SNAP-IN
Position: 16
2 PAD, FRICTION, .375 X 1.25 X 4.00
Position: 17
1 SPACER, 1.13 X 1.75 X .75
Position: 17
5 WASHER, 3/8 SAE
Position: 17
4 WASHER, 3/8 SAE
Position: 17
2 GRIP, FOAM, .48 x 10 x .125 Black
Position: 17
1 CLAMP, #4 HOSE, STAINLESS
Position: 17
2 ROLLER, 1.256 X 1.75 X .813
Position: 17
2 WASHER, 5/16 FENDER
Position: 17
2 SPACER, .52 X 1.00 X 3.50
Position: 17
2 SOC SET SCREW, 5/16-18 X 1-1/2 SS
Position: 18
4 WASHER, #10 SAE
Position: 18
1 WASHER, 1/4 SAE
Position: 18
5 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 18
11 CLAMP, HOSE
Position: 18
10 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 18
9 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 18
1 SPACER, .64 X 1.13 X .63
Position: 18
8 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 18
4 NUT, 1/2-13 HEX JAM
Position: 18
4 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 19
8 NUT, #10-24 HEX NYLON LOCK
Position: 19
1 AIR INLET TUBE (S/N: 2013821995 & BELOW)
Position: 19
1 AIR INLET TUBE
Position: 19
1 EYE BOLT, 3/8-16 X 5, 1 EYE
Position: 19
1 EYE BOLT, 3/8-16 X 4-1/4, 1 EYE
Position: 19
1 ADAPTER, 90 DEG, 9/16-5/8 BARB
Position: 19
1 WASHER, 1/2 GD9 YZ
Position: 19
2 ROD, DECK LIFT
Position: 19
2 WASHER, 3/8 SPLIT LOCK
Position: 19
1 BOLT, 1/2-13 X 7, CARRIAGE
Position: 19
1 SPRING, TORSION
Position: 19
1 SPACER, .39 X 1.00 X .80
Position: 20
1 RUBBER DUST CAP (S/N: 2013821995 & BELOW)
Position: 20
1 RUBBER DUST CAP
Position: 20
3 SPACER, .39 X .75 X 1.06
Position: 20
4 NUT, HEX, 7/16-14, SER, FLG, GD5, YZ
Position: 20
1 SPACER, .32 X .75 X 1.06
Position: 20
1 HANDLE, CRANK, COMPACT RIDER
Position: 20
2 WASHER, 1/2 GD9 YZ
Position: 20
2 KEY, 1/4 SQ. X 3/4
Position: 20
2 SPRING, EXTENSION, SWIVEL, SHORT HOOK
Position: 20
1 CAP, PROTECTOR, .120 ID
Position: 20
1 RAIN COVER
Position: 21
1 RAIN COVER (S/N: 2013821995 & BELOW)
Position: 21
1 RAIN COVER
Position: 21
2 PULLEY, BACKSIDE IDLER, STEEL
Position: 21
1 WASHER, .34 X 1.25 X 10 GA
Position: 21
1 SEAT, EVOLUTION
Position: 21
3 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 21
6 SHIELD, PULLEY BEARING
Position: 21
1 WASHER, 5/16 FENDER
Position: 21
6 WASHER, 1/4 SAE
Position: 22
3 CLAMP
Position: 22
3 CLAMP (S/N: 2013821996 & ABOVE)
Position: 22
3 CLAMP (S/N: 2013821995 & BELOW)
Position: 22
3 CLAMP
Position: 22
1 SPACER, .45 X 1.88 X .38
Position: 22
5 WASHER, 5/16 SAE
Position: 22
3 WASHER, 5/16 SAE
Position: 22
1 SPACER, .39 X 1.00 X .25
Position: 22
1 CLEVIS, 3/8-24 RH, 3/8" PIN HOLE
Position: 22
1 SAFETY WALK, 6.00 X 11.25
Position: 22
5 NUT, 1/2-13 HEX NYLOCK FLANGE
Position: 22
1 BELT, BP-SEC, 94.10EL, LG ARAMID, WRPD
Position: 22
1 COVER, VINYL FUSEBLOCK (Not illustrated.)
Position: 22
1 WASHER, 3/8 SPLIT LOCK
Position: 23
1 AIR FILTER ASSEMBLY (REF NO. 24 - 27)
Position: 23
1 AIR FILTER ASSEMBLY (S/N: 2013821995 & BELOW)
Position: 23
1 AIR FILTER ASSEMBLY (INCLUDES REF NOS 20 & 24 -
Position: 23
1 SPRING, EXTENSION, SWIVEL, SHORT HOOK
Position: 23
1 SPRING-EXTENSION, SWIVEL END
Position: 23
1 ROD, CHUTE PIVOT
Position: 23
1 ROD, HYDRO LINKAGE
Position: 23
3 GREASE FITTING, 1/4-28 STRAIGHT
Position: 23
2 SAFETY WALK, 3.5 X 6.00
Position: 23
1 BELT, BP-SEC, 108.2EL, ARAMID, WRPD
Position: 23
4 CLAMP, VINYL COATED, 5/8 ID (Not illustrated.)
Position: 23
3 CLAMP, VINYL COATED, 5/8 ID (Not illustrated.)
Position: 23
1 ASSM, FRONT END PIVOT, EVO 36 (5404766B) (36" MODEL ONLY) (S/N:
Position: 24
2 SCREW, BUTTON HD. SOC CAP, 3/8-16X1. BZ
Position: 24
1 LEVER, THROTTLE CONTROL
Position: 24
1 AIR FILTER, ELEMENT
Position: 24
1 AIR FILTER, ELEMENT, PRIMARY (S/N: 2013821995 & BELOW)
Position: 24
1 AIR FILTER, ELEMENT, PRIMARY
Position: 24
5 NUT, 5/16-18 HEX NYLOCK FLANGE
Position: 24
1 SPACER, .38 X .50 X .75
Position: 24
1 COLLAR, 5/8 SPLIT
Position: 24
1 PULLEY, IDLER, 5" OD, 1"FACE, 5.75 FL
Position: 24
1 DECK SHELL W/ DECALS, 48", EVOLUTION
Position: 24
1 PULLEY, DOUBLE, 5.54" OVER
Position: 24
1 SWITCH, IGNITION, 6 POST (Includes Ref Nos 25 - 27)
Position: 24
2 PLUG, PANEL, 1.25 - BLACK
Position: 25
2 CLAMP, CAP
Position: 25
1 AIR FILTER, ELEMENT, SECONDARY (S/N: 2013821995 & BELOW)
Position: 25
1 AIR FILTER, ELEMENT, SECONDARY
Position: 25
1 CLAMP, HOSE, 1.000 DIA.
Position: 25
1 SPACER, .39 X 1.00 X .25, YZ
Position: 25
1 SPRING, DECK LIFT ASSIST
Position: 25
1 SPACER, .515 X 1.00 X 1.00, YZ
Position: 25
2 PULLEY, IDLER, 5" OD, 1"FACE, 5.75 FL
Position: 25
6 SPACER, .39 X .75 X .50
Position: 25
1 KEY, IGNITION, MOLDED SET (SV)
Position: 25
6 NUT, #8-32 HEX NYLON LOCK
Position: 26
1 CAP, FILTER CASE
Position: 26
1 CAP END, FILTER CASE (S/N: 2013821995 & BELOW)
Position: 26
1 CAP END, FILTER CASE
Position: 26
1 NUT, 3/8-16 SIDE LOCK
Position: 26
1 CLEVIS, 5/16-24, PLASTIC
Position: 26
4 NUT, 1/2-20 HEX NYLON LOCK
Position: 26
1 COVER (SV)
Position: 26
5 BODY CLIP, 5/16-18-7GA MATERIAL
Position: 27
2 NUT, 5/16-18 WING NYLON LOCK
Position: 27
1 RUBBER DUST CAP
Position: 27
1 BRACKET PLATE, LOWER (S/N: 2013821995 & BELOW)
Position: 27
1 BREATHER TUBE
Position: 27
1 PLASTIC NUT (SV)
Position: 27
2 SPACER, .39 X .75 X .50
Position: 28
2 RELAY, 12V, 40A (SEE ELECTRICAL GROUP)
Position: 28
1 CASE, BRACKET, COMPLETE
Position: 28
1 BRACKET PLATE, UPPER (S/N: 2013821995 & BELOW)
Position: 28
1 BRACKET, COMPLETE
Position: 28
6 WASHER, 3/8 SAE
Position: 28
1 KIT, 48" DISCHARGE CHUTE, EVOLUTION (INCLUDES REF NO. 1, 7, 13, 15,
Position: 28
1 AIR INLET TUBE
Position: 29
1 CLAMP, VINYL INSULATED
Position: 29
1 ADAPTER, 45 DEG, 9/16-3/8 BARB
Position: 29
3 NUT, 3/8-24 HEX JAM
Position: 29
1 ASSM, FRONT END PIVOT, EVO 48 (5404837B) (48" MODEL ONLY)
Position: 30
1 SCREEN, SPARK ARRESTER (NOT ILLUSTRATED)
Position: 30
1 NUT, 1/4-20 HEX NYLOCK FLANGE
Position: 30
2 BEARING, R6-2RS (S/N: 2013821995 & BELOW)
Position: 30
6 NUT, 3/8-16 HEX NYLOCK FLANGE
Position: 30
1 WASHER, 5/16 USS
Position: 31
1 CLAMP, EXHAUST EXTENSION
Position: 31
1 BAND, CLAMP
Position: 31
2 INSERT, BEARING
Position: 31
2 SPRING-EXT, 3.281 x .751 x .075 WIRE
Position: 31
6 WASHER, 1/2 GD9 YZ
Position: 31
1 WASHER, .64 X 3.00 X .14, YZ
Position: 31
2 FUSE, ATO, 20 AMP
Position: 31
1 ASSM, FRONT END PIVOT, EVO 36 (5404993B) (36" MODEL ONLY) (S/N:
Position: 32
1 SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ (NOT ILLUSTRATED)
Position: 32
2 WASHER, 5/16 SAE
Position: 32
1 BRACKET
Position: 32
2 BUSHING, 15MM X 25MM X 8.6MM - KEYED
Position: 32
1 PIVOT, SPRING ROD
Position: 32
2 SPACER, .515 X 1.00 X 1.22, YZ
Position: 32
2 WASHER, LIGHT LOCK, 5/16
Position: 32
1 CLAMP, VINYL COATED, 5/8 ID
Position: 33
1 NUT, M8-1.25 SERR. FLANGE, CZ
Position: 33
2 SPACER, .39 X 1.00 X .75
Position: 33
4 PIVOT BLOCK, PLASTIC
Position: 33
2 SPACER, .39 X 1.00 X .50
Position: 33
1 ASSM, IDLER ARM, EVO 48 (5404925B)
Position: 33
2 NUT, HEX JAM, 5/16-24
Position: 33
3 BOLT
Position: 34
2 WASHER, .390 X 1.50 X .109, YZ
Position: 34
1 HOSE ASM, LH, RH PUMP PORT BOTTOM MOTOR PORT
Position: 34
2 FOAM, GRIP, 3/4" ID X 12" LG X .187 BLK
Position: 34
1 ASSM, IDLER ARM, EVO 36 (5405003B)
Position: 34
2 FUSE, ATO-15 (15 AMP)
Position: 34
4 BOLT, FLANGED
Position: 35
6 SET SCREW, 5/16-18 X 3/8 PCH.
Position: 35
2 SPACER, .39 X .63 X 1.00, YZ
Position: 35
2 NUT, #10-24 HEX NYLON LOCK
Position: 35
1 WIRE HARNESS, OPERATOR COMPARTMENT, EVO
Position: 35
4 NUT, #10-24 HEX NYLON LOCK
Position: 36
4 WASHER, 1/4 LOCK
Position: 36
1 SPACER, .52 X 1.00 X 3.50
Position: 36
1 SPACER, .52 X 1.00 X .44
Position: 36
1 CLAMP, HOSE, 1.000 DIA
Position: 36
1 COVER-MUFFLER
Position: 37
2 NUT, 5/16-18 HEX NYLON LOCK
Position: 37
1 PULLEY, 6" DEEP GROOVE, COMPENSATOR
Position: 37
1 WIRE HARNESS, ALL CONDITION SHUT DOWN
Position: 37
1 FITTING, ELBOW, 3/8" (SV)
Position: 38
4 NUT, 1/4-20 HEX SERR. FLANGE
Position: 39
1 KIT, GROMMET (SV)
Position: 39
1 NUT, 1/2-13 HEX SIDE LOCK
Position: 39
1 NUT, 5/16-18 HEX
Position: 39
1 GROMMET (SV)
Position: 40
1 SPRING-EXTN 1.040ODX 04.000LG .105WIRE D
Position: 40
1 FITTING, ELBOW, 5/8" (SV)
Position: 41
2 WASHER-3/8 FENDER
Position: 41
2 SPACER, .390 X 1.00 X .190
Position: 41
1 BAR, 1/4 X 1.00 X 15.5
Position: 41
4 SHIM, .375" X .625 X .031 THK (S/N: 2013821995 & BELOW)
Position: 42
3 BOLT, 3/8-16 X 3/8, 1/2 SHOULDER
Position: 42
1 EYEBOLT, 3/8-16 X 4, 2-1/8 OF THREAD
Position: 42
2 BEARING, .375" ID X .875" OD X .341" THK (S/N: 2013821996 & ABOVE)
Position: 43
4 NUT, 1/4-20 HEX NYLOCK FLANGE
Position: 43
1 SPACER, .52 X 1.00 X .88
Position: 43
8 BOLT, 3/8-16 X 1 W/ PATCH
Position: 44
1 WASHER, 1/2 SAE
Position: 44
8 WASHER, 3/8 SPLIT LOCK
Position: 45
2 NUT, 3/8-16 HEX
Position: 45
1 WELD, CONTROL RAMP, EVO (S/N: 2013947485 & ABOVE)
Position: 46
2 SPACER, .52 X 1.00 X 1.88 - SS
Position: 46
1 KNEE PAD, OUTER RH, EVOLUTION 48/52 (36" Models: All; 48" Models: S/N:
Position: 46
1 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
Position: 46
4 WASHER, 1/2 SAE
Position: 46
2 CABLE, PUSH/PULL, 30", SPEED CONTROL (S/N: 2013952388 & ABOVE)
Position: 47
1 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 47
1 COVER, VINYL HANDLE
Position: 47
1 KNEE PAD, OUTER LH, EVOLUTION 48/52 (36" Models: All; 48" Models: S/N:
Position: 47
1 SPACER, .515 X 1.00 X .218
Position: 47
4 KNOB, 5/16-18 X 1.00, ROSETTE, BLK
Position: 48
2 ACORN NUT, 5/16-18 S/S (USE LOCTITE 271 TO INSTALL)
Position: 48
1 SPACER, .52 X 1.00 X .75
Position: 48
2 NUT, 1/4-20 HEX NYLOCK FLANGE
Position: 49
1 ROD, LEVER CONNECTING
Position: 49
4 VELCRO, 2" X 2", HOOK MATERIAL (36" MODELS ONLY)
Position: 49
1 SPACER, .564 X .904 X .310, YZ
Position: 50
1 ADJUSTER, BRAKE LINKAGE
Position: 50
2 WASHER, 1/2 SAE
Position: 50
6 VELCRO, 2" X 2-1/2", HOOK MATERIAL (36" MODELS ONLY)
Position: 50
1 NUT, 1/2-13 HEX JAM
Position: 51
2 VELCRO, 2" X 4", HOOK MATERIAL (36" Models: All; 48" Models: S/N:
Position: 51
2 ROD, DECK LIFT, EVOLUTION 48"
Position: 52
4 VELCRO, 2" X 2", HOOK MATERIAL (48" Models: S/N: 2014004709 & Below)
Position: 52
2 WASHER, .50 X 1.75 X .13
Position: 53
2 NUT, 3/8-16 HEX SERRATED FLANGE
Position: 53
6 VELCRO, 2" X 3", HOOK MATERIAL (48" Models: S/N: 2014004709 & Below)
Position: 53
1 RETAINER, FABRIC, KNEE PADS, LH (20HP MODELS ONLY)
Position: 54
1 KNOB, PLASTIC, 1/2-13
Position: 55
2 EYE BOLT, 3/8-16 X 5, 1 EYE
Position: 55
1 RETAINER, FABRIC, KNEE PADS, RH (20HP MODELS ONLY)
Position: 55
1 SPACER, .390 X 1.00 X 1.00 - YZ
Position: 56
2 SPACER, .38 X .75 X 1.25, YZ
Position: 56
1 KNEE PAD, INNER, RH, EVOLUTION 36/48 (48" Models: S/N: 2014004710 &
Position: 56
1 WASHER,WAVE,M10
Position: 57
2 SPACER, .515 X 1.00 X .218
Position: 57
1 KNEE PAD, INNER. LH, EVOLUTION 36/48 (48" Models: S/N: 2014004710 &
Position: 57
1 WASHER, 3/8 GD.9 FLAT
Position: 58
1 ROD, LEVER CONNECTING
Position: 58
2 KNEE PAD, CENTER, EVOLUTION 36/48 (48" Models: S/N: 2014004710 &
Position: 58
1 POINTER, DECK HEIGHT
Position: 59
1 KNEE PAD, OUTER, RH, EVOLUTION 36/48 (48" Models: S/N: 2014004710 &
Position: 59
2 SPACER, .38 X .50 X .27
Position: 60
1 KNEE PAD, OUTER, LH, EVOLUTION 36/48 (48" Models: S/N: 2014004710 &
Position: 60
6 NUT, 1/4-20 HEX NYLOCK FLANGE (48" Models: S/N: 2014004710 &
Position: 61
1 SHIM, .375 X .625 X .031 THK
Position: 62
2 CLEVIS PIN, 1/2 X 1.36 SAE STANDARD
Position: 68
2 SPACER, .52 X 1.00 X .44
Position: 70
19HP Kawasaki w/ 36" Mower Deck (EVKAV1936)
Position: 5900778
(EVKAV1936)
Position: 5900778
27HP Kawasaki w/ 48" Mower Deck (EVKAV2748)
Position: 5900779
(EVKAV2748)
Position: 5900779
20HP Kawasaki w/ 48" Mower Deck (EVKAV2048)
Position: 5900834
(EVKAV2048)
Position: 5900834
19HP Kawasaki w/ 36" Mower Deck CAL (EVKAV1936CAL)
Position: 5900854
(EVKAV1936CAL)
Position: 5900854
19HP Kawasaki w/ 36" Mower Deck (EVKAV1936CE)
Position: 5900913
(EVKAV1936CE)
Position: 5900913