Exploded view Fischer snr7-dov-2008-elp216753bdv

Discover the complete exploded view Fischer snr7-dov-2008-elp216753bdv, an essential guide to easily identify all spare parts of your appliance. Whether you are looking for a specific part or need help with the repair, our detailed presentation helps you understand each component of your . Quickly find the parts you need to extend the life of your Fischer snr7-dov-2008-elp216753bdv and avoid unexpected breakdowns.

Repair Assistant Powered by ChatGPT

Spare Parts List

1 HANDLE, Upper
1 HANDLE, Upper
Position: 1
1 DECK, 21” Cast Aluminum Rocker (Red) was
1 DECK, 21” Cast Aluminum Rocker (Red) was
Position: 1
2 REAR WHEEL ASSY, 9 x 2 (“Mass” Tread) includes Bushing 7073618; use
2 REAR WHEEL ASSY, 9 x 2 (“Mass” Tread) includes Bushing 7073618; use
Position: 1
2 SEAL, Pinion (Felt)
2 SEAL, Pinion (Felt)
Position: 1
1 DECAL, SNAPPER Name Plate
1 DECAL, SNAPPER Name Plate
Position: 1
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
Position: 1
1 HANDLE, Middle
1 HANDLE, Middle
Position: 2
1 BELT COVER, Commercial Metal B&S
1 BELT COVER, Commercial Metal B&S
Position: 2
2 REAR WHEEL ASSY, 9 x 2 (LS Tread) includes Bushing 7073618; use
2 REAR WHEEL ASSY, 9 x 2 (LS Tread) includes Bushing 7073618; use
Position: 2
2 RETAINER, Pinion Seal
2 RETAINER, Pinion Seal
Position: 2
1 DECAL, SNAPPER Control Panel
1 DECAL, SNAPPER Control Panel
Position: 2
1 FRAME, Catcher Weldment GRASS CATCHER PARTS
1 FRAME, Catcher Weldment GRASS CATCHER PARTS
Position: 2
2 BRACKET, Handle
2 BRACKET, Handle
Position: 3
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
Position: 3
2 REAR WHEEL ASSY, 9 x 2 (Double Bar II Tread) includes Bushing 7024541; use
2 REAR WHEEL ASSY, 9 x 2 (Double Bar II Tread) includes Bushing 7024541; use
Position: 3
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
Position: 3
1 DECAL, SNAPPER, Panel
1 DECAL, SNAPPER, Panel
Position: 3
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
Position: 3
1 COTTER PIN, Bow Tie Locking
1 COTTER PIN, Bow Tie Locking
Position: 4
2 BUSHING, Wheel (powdered metal)
2 BUSHING, Wheel (powdered metal)
Position: 4
4 RING, External Retaining Waldes # 5133-50
4 RING, External Retaining Waldes # 5133-50
Position: 4
1 DECAL, SNAPPER
1 DECAL, SNAPPER
Position: 4
1 PLUG, Mulching MULCHING PARTS
1 PLUG, Mulching MULCHING PARTS
Position: 4
1 BAIL, OPC Control
1 BAIL, OPC Control
Position: 5
1 CLAMP, Casing
1 CLAMP, Casing
Position: 5
2 BUSHING, Wheel (nylon)
2 BUSHING, Wheel (nylon)
Position: 5
2 ASSEMBLY, Bearing Carrier includes bearing p/n
2 ASSEMBLY, Bearing Carrier includes bearing p/n
Position: 5
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Position: 5
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 7013010) DISCHARGING PARTS
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 7013010) DISCHARGING PARTS
Position: 5
1 CLIP, Zone Control
1 CLIP, Zone Control
Position: 6
1 SCREW, #10-32 x 5/8” Self-Tap
1 SCREW, #10-32 x 5/8” Self-Tap
Position: 6
2 FRONT WHEEL ASSY, 8 x 2 (“Mass” Tread) use with Hub
2 FRONT WHEEL ASSY, 8 x 2 (“Mass” Tread) use with Hub
Position: 6
2 BUSHING, Rear Axle (S/P)
2 BUSHING, Rear Axle (S/P)
Position: 6
1 DECAL, Warning (International Symbol)
1 DECAL, Warning (International Symbol)
Position: 6
1 * CABLE, Zone Control (53.98”)
1 * CABLE, Zone Control (53.98”)
Position: 7
1 * CABLE, Zone Control (OPC) DOV Engine (53.73”) used on Model ELP216753BDV
1 * CABLE, Zone Control (OPC) DOV Engine (53.73”) used on Model ELP216753BDV
Position: 7
1 PLUG, Hole (Polyethylene)
1 PLUG, Hole (Polyethylene)
Position: 7
2 FRONT WHEEL ASSY, 8 x 2, (LS Tread)
2 FRONT WHEEL ASSY, 8 x 2, (LS Tread)
Position: 7
1 TUBING, 5/8 I.D. Convoluted
1 TUBING, 5/8 I.D. Convoluted
Position: 7
1 DECAL, Danger (Keep Hands and Feet Away)
1 DECAL, Danger (Keep Hands and Feet Away)
Position: 7
1 WELDMENT, Handle Clutch
1 WELDMENT, Handle Clutch
Position: 8
4 BOLT, 5/16-18 x 1” Round Head Carriage GR 5 or
4 BOLT, 5/16-18 x 1” Round Head Carriage GR 5 or
Position: 8
2 FRONT WHEEL ASSY, 8 x 2, (Double Bar II Tread)
2 FRONT WHEEL ASSY, 8 x 2, (Double Bar II Tread)
Position: 8
1 SCREW, #10-24 x 3/4” Pan Head Machine
1 SCREW, #10-24 x 3/4” Pan Head Machine
Position: 8
1 DECAL, European Community (CE)
1 DECAL, European Community (CE)
Position: 8
1 GRIP, International Symbol
1 GRIP, International Symbol
Position: 9
1 ASSEMBLY, Discharge Door
1 ASSEMBLY, Discharge Door
Position: 9
2 HUB CAP, 3-1/4” Diameter, Black
2 HUB CAP, 3-1/4” Diameter, Black
Position: 9
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
Position: 9
1 DECAL, Height Control Instruction (Euro)
1 DECAL, Height Control Instruction (Euro)
Position: 9
1 CABLE, Clutch (Adjustable)
1 CABLE, Clutch (Adjustable)
Position: 10
8 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap or
8 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap or
Position: 10
4 HAIRPIN, 1/16 x 29/32” Cotter
4 HAIRPIN, 1/16 x 29/32” Cotter
Position: 10
1 BRACKET, Transmission
1 BRACKET, Transmission
Position: 10
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Position: 10
5 CLAMP, 7/8” Double Cable
5 CLAMP, 7/8” Double Cable
Position: 11
2 WASHER, .28 x .63 x .06 Flat was
2 WASHER, .28 x .63 x .06 Flat was
Position: 11
4 WASHER, 1/2” Flat
4 WASHER, 1/2” Flat
Position: 11
1 SPRING, Clutch
1 SPRING, Clutch
Position: 11
1 DECAL, Speed Shift- ELP, ECLP
1 DECAL, Speed Shift- ELP, ECLP
Position: 11
1 CABLE-TIE, 7” not shown
1 CABLE-TIE, 7” not shown
Position: 12
1 PLATE, Height Adjust
1 PLATE, Height Adjust
Position: 12
2 HUB CAP, 9” Euro
2 HUB CAP, 9” Euro
Position: 12
1 WASHER, 7/32” Flat
1 WASHER, 7/32” Flat
Position: 12
1 DECAL, Chute Deflector (Cast)
1 DECAL, Chute Deflector (Cast)
Position: 12
1 BRACKET, Shift
1 BRACKET, Shift
Position: 13
2 RIVET, 3/16 x 1/2” Steel
2 RIVET, 3/16 x 1/2” Steel
Position: 13
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
Position: 13
2 * NUT, #10-24 Hex Center Lock
2 * NUT, #10-24 Hex Center Lock
Position: 13
1 DECAL, Warning
1 DECAL, Warning
Position: 13
4 WIRE TIE, 1.29” Long Black
4 WIRE TIE, 1.29” Long Black
Position: 14
1 BRACKET, RH Trailing Shield Pivot Rod
1 BRACKET, RH Trailing Shield Pivot Rod
Position: 14
2 WHEEL RETAINER, 3/8”
2 WHEEL RETAINER, 3/8”
Position: 14
2 PAWL, 3/16” O.D.
2 PAWL, 3/16” O.D.
Position: 14
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Position: 14
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position: 15
1 BRACKET, LH Trailing Shield Pivot Rod not shown
1 BRACKET, LH Trailing Shield Pivot Rod not shown
Position: 15
1 PIN, 3/8 x 5/8”
1 PIN, 3/8 x 5/8”
Position: 15
1 TRANSMISSION ASSY, 3SP Commercial
1 TRANSMISSION ASSY, 3SP Commercial
Position: 15
1 DECAL, Warning Euro Multi-Panel
1 DECAL, Warning Euro Multi-Panel
Position: 15
8 WASHER, 11/32” Flat
8 WASHER, 11/32” Flat
Position: 16
2 SUPPORT, Rear Axle
2 SUPPORT, Rear Axle
Position: 16
1 SPRING, Clutch (Also shown on Transmission
1 SPRING, Clutch (Also shown on Transmission
Position: 16
1 * LEVER, Transmission (Metal)
1 * LEVER, Transmission (Metal)
Position: 16
1 DECAL, OPC Bail International Symbol
1 DECAL, OPC Bail International Symbol
Position: 16
2 WASHER, 7/32” Flat
2 WASHER, 7/32” Flat
Position: 17
1 PUSHNUT, 1/4” Black
1 PUSHNUT, 1/4” Black
Position: 17
1 WELDMENT, Tie Bar
1 WELDMENT, Tie Bar
Position: 17
1 * SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
1 * SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position: 17
2 DECAL, Chute/International Warning
2 DECAL, Chute/International Warning
Position: 17
1 CONTROL PANEL (w/o El. Switch Hole)
1 CONTROL PANEL (w/o El. Switch Hole)
Position: 18
1 ROD, Trailing Shield Pivot (1/4” Dia. x 16-1/4” long)
1 ROD, Trailing Shield Pivot (1/4” Dia. x 16-1/4” long)
Position: 18
1 COTTER PIN, 1/8 x 3/4” was
1 COTTER PIN, 1/8 x 3/4” was
Position: 18
1 NUT, M10 x 1.50 Hex Nyloc
1 NUT, M10 x 1.50 Hex Nyloc
Position: 18
1 DECAL, Throttle Control, B&S
1 DECAL, Throttle Control, B&S
Position: 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
Position: 19
1 SHIELD, Trailing, Commercial Cast
1 SHIELD, Trailing, Commercial Cast
Position: 19
1 SPRING, Tie Bar
1 SPRING, Tie Bar
Position: 19
1 PULLEY, Transmission
1 PULLEY, Transmission
Position: 19
1 DECAL, Convertible Mower
1 DECAL, Convertible Mower
Position: 19
1 ROPE GUIDE (1/4-20 threads)
1 ROPE GUIDE (1/4-20 threads)
Position: 20
1 BAFFLE, Discharge
1 BAFFLE, Discharge
Position: 20
2 HUB CAP, Front Wheels
2 HUB CAP, Front Wheels
Position: 20
1 WASHER, Felt
1 WASHER, Felt
Position: 20
1 DECAL, Noise, 100 dB (shown)
1 DECAL, Noise, 100 dB (shown)
Position: 20
1 DECAL, Noise, 98 dB (not shown)
1 DECAL, Noise, 98 dB (not shown)
Position: 20
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position: 21
5 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
5 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position: 21
2 BUSHING, Front Axle
2 BUSHING, Front Axle
Position: 21
1 KIT, Height Adjusting Lever (incl. items 22-24)
1 KIT, Height Adjusting Lever (incl. items 22-24)
Position: 21
1 DECAL, 2005 Year of Manufacture
1 DECAL, 2005 Year of Manufacture
Position: 21
1 DECAL, 2006 Year of Manufacture (not shown)
1 DECAL, 2006 Year of Manufacture (not shown)
Position: 21
1 DECAL, 2007 Year of Manufacture (not shown)
1 DECAL, 2007 Year of Manufacture (not shown)
Position: 21
1 * THROTTLE CONTROL, 7.0 HP B&S (48.5”)
1 * THROTTLE CONTROL, 7.0 HP B&S (48.5”)
Position: 22
1 * THROTTLE CONTROL, 6.75 HP B&S DOV (48.0”) used on Model ELP216753BDV
1 * THROTTLE CONTROL, 6.75 HP B&S DOV (48.0”) used on Model ELP216753BDV
Position: 22
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position: 22
1 WELDMENT, Front Axle
1 WELDMENT, Front Axle
Position: 22
2 NUT, #10-32 Hex Nyloc
2 NUT, #10-32 Hex Nyloc
Position: 22
2 THROTTLE KNOB
2 THROTTLE KNOB
Position: 23
2 IDLER SPACER
2 IDLER SPACER
Position: 23
1 SPRING, Axle Retaining RH
1 SPRING, Axle Retaining RH
Position: 23
1 LEVER, Height Adjusting (Black)
1 LEVER, Height Adjusting (Black)
Position: 23
4 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
4 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
Position: 24
2 NUT, 3/8-16 Hex Flange Lock or
2 NUT, 3/8-16 Hex Flange Lock or
Position: 24
1 SPRING, Axle Retaining LH
1 SPRING, Axle Retaining LH
Position: 24
2 SCREW, #10-32 x 5/8, Hex Washer Self-Tap, GR
2 SCREW, #10-32 x 5/8, Hex Washer Self-Tap, GR
Position: 24
1 FOAM GRIP, 18.75”
1 FOAM GRIP, 18.75”
Position: 25
1 BELT GUIDE (Wireform)
1 BELT GUIDE (Wireform)
Position: 25
2 HUB CAP, 1-3/8: Diameter black
2 HUB CAP, 1-3/8: Diameter black
Position: 25
1 GRIP, Flat Bar
1 GRIP, Flat Bar
Position: 25
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position: 26
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
Position: 26
1 PINION, RH Drive
1 PINION, RH Drive
Position: 26
2 NUT, 3/8-16 Hex Center Lock
2 NUT, 3/8-16 Hex Center Lock
Position: 27
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
Position: 27
1 PINION, LH Drive
1 PINION, LH Drive
Position: 27
6 WASHER, 5/16” Internal Tooth Lock
6 WASHER, 5/16” Internal Tooth Lock
Position: 28
1 KEY, Hi-Pro #HP506 (Briggs engine)
1 KEY, Hi-Pro #HP506 (Briggs engine)
Position: 28
2 WASHER, 17/32” Flat
2 WASHER, 17/32” Flat
Position: 28
1 * CONTROL, Speed Select
1 * CONTROL, Speed Select
Position: 29
2 NUT, 3/8-16 Hex Nyloc
2 NUT, 3/8-16 Hex Nyloc
Position: 29
2 SHIELD, Dust
2 SHIELD, Dust
Position: 29
2 SCREW, 5/16-18 x 2” Square Neck Curved Head
2 SCREW, 5/16-18 x 2” Square Neck Curved Head
Position: 30
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
Position: 30
1 WELDMENT, Rear Axle
1 WELDMENT, Rear Axle
Position: 30
8 NUT, 5/16-18 Hex Nyloc
8 NUT, 5/16-18 Hex Nyloc
Position: 31
1 BLADE, 21” Bagging
1 BLADE, 21” Bagging
Position: 31
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
Position: 32
1 WASHER, 3/8” Split Lock (Heavy)
1 WASHER, 3/8” Split Lock (Heavy)
Position: 32
5 WASHER, 1/4” Internal Tooth Lock or
5 WASHER, 1/4” Internal Tooth Lock or
Position: 33
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
Position: 33
5 NUT, 1/4-20 Hex or
5 NUT, 1/4-20 Hex or
Position: 34
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR
Position: 34
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position: 35
2 BUSHING, .27 x .35 x .4 Flange
2 BUSHING, .27 x .35 x .4 Flange
Position: 36
1 PIN, 1/4 x 1-1/2”
1 PIN, 1/4 x 1-1/2”
Position: 37
1 PUSHNUT, 1/4”
1 PUSHNUT, 1/4”
Position: 38
1 CLAMP, Double Tube
1 CLAMP, Double Tube
Position: 39
2 KNOB, 5/16-18 Wing (Black)
2 KNOB, 5/16-18 Wing (Black)
Position: 40