Exploded view Fischer rzt20420bve2

Discover the complete exploded view Fischer rzt20420bve2, an essential guide to easily identify all spare parts of your appliance. Whether you are looking for a specific part or need help with the repair, our detailed presentation helps you understand each component of your . Quickly find the parts you need to extend the life of your Fischer rzt20420bve2 and avoid unexpected breakdowns.

Repair Assistant Powered by ChatGPT

Spare Parts List

2 ASSEMBLY, Front Wheel & Tire
2 ASSEMBLY, Front Wheel & Tire
Position: 1
1 FRONT AXLE, Cast (Cardinal Red)
1 FRONT AXLE, Cast (Cardinal Red)
Position: 1
1 FRAME, RZT (Cardinal Red)
1 FRAME, RZT (Cardinal Red)
Position: 1
1 WELDMENT, Transaxle Support
1 WELDMENT, Transaxle Support
Position: 1
1 HANDLE
1 HANDLE
Position: 1
1 NUT, 10-24 Hex Nyloc
1 NUT, 10-24 Hex Nyloc
Position: 1
1 FENDER, LH RZT
1 FENDER, LH RZT
Position: 1
1 ASSEMBLY, 15” Seat, w/Armrests Ref. Michigan Seat Co.
1 ASSEMBLY, 15” Seat, w/Armrests Ref. Michigan Seat Co.
Position: 1
1 *ENGINE, 18.5 HP Briggs, Intek Model 31P7770121B1
1 *ENGINE, 18.5 HP Briggs, Intek Model 31P7770121B1
Position: 1
1 *ENGINE, 20 HP Briggs Intek Twin Model 4415770118B1
1 *ENGINE, 20 HP Briggs Intek Twin Model 4415770118B1
Position: 1
1 DECAL, Ignition, RZT
1 DECAL, Ignition, RZT
Position: 1
1 HANDLE, Deck Lift
1 HANDLE, Deck Lift
Position: 1
1 DECK, 38 RZT
1 DECK, 38 RZT
Position: 1
1 DISCHARGE CHUTE, 38” Deck
1 DISCHARGE CHUTE, 38” Deck
Position: 1
2 *RING, 1-3/4” External Retaining Ring
2 *RING, 1-3/4” External Retaining Ring
Position: 1
1 WELDMENT, 42” Deck
1 WELDMENT, 42” Deck
Position: 1
1 SUB-ASSY, 42” Deck w/Spindles Ref. Sub-Assembly pages
1 SUB-ASSY, 42” Deck w/Spindles Ref. Sub-Assembly pages
Position: 1
1 NUT, 3/4-16 Hex Jam, GR
1 NUT, 3/4-16 Hex Jam, GR
Position: 1
1 SOLENOID - Super Trombetta- 2 Terminal
1 SOLENOID - Super Trombetta- 2 Terminal
Position: 1
1 WIRING HARNESS, Briggs RZT
1 WIRING HARNESS, Briggs RZT
Position: 1
1 WIRING HARNESS, Briggs 18 & 20 HP
1 WIRING HARNESS, Briggs 18 & 20 HP
Position: 1
1 RIM, Caster Wheel
1 RIM, Caster Wheel
Position: 2
3 LUBE FITTING, 3/16” Press-In
3 LUBE FITTING, 3/16” Press-In
Position: 2
12 NUT, 5/16-18 Hex Flange Lock, GR
12 NUT, 5/16-18 Hex Flange Lock, GR
Position: 2
2 ROD, Roll Release
2 ROD, Roll Release
Position: 2
1 WELDMENT, LH Control Arm
1 WELDMENT, LH Control Arm
Position: 2
1 ROD, Handle R.H.
1 ROD, Handle R.H.
Position: 2
1 *WELDMENT, LH Control Arm
1 *WELDMENT, LH Control Arm
Position: 2
1 FENDER, RH RZT
1 FENDER, RH RZT
Position: 2
1 SEAT PLATE
1 SEAT PLATE
Position: 2
4 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
4 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
Position: 2
1 DECAL, Snapper Fender, RH
1 DECAL, Snapper Fender, RH
Position: 2
2 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
2 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
Position: 2
2 ASSEMBLY, 38” Spindle
2 ASSEMBLY, 38” Spindle
Position: 2
1 ROD, Mounting, Side Discharge (3/8-16 thread)
1 ROD, Mounting, Side Discharge (3/8-16 thread)
Position: 2
2 *BALL BEARING, 3/4” I.D.
2 *BALL BEARING, 3/4” I.D.
Position: 2
2 ASSEMBLY, Spindle Brake see 42” Deck Spindle pages
2 ASSEMBLY, Spindle Brake see 42” Deck Spindle pages
Position: 2
1 *WASHER, Spindle (Special)
1 *WASHER, Spindle (Special)
Position: 2
2 SCREW, 1/4-20 x 1” Hex Head Cap, GR
2 SCREW, 1/4-20 x 1” Hex Head Cap, GR
Position: 2
1 CABLE, Battery Positive 20"
1 CABLE, Battery Positive 20"
Position: 2
1 TIRE, 11 x 4.00-5, Smooth Tread
1 TIRE, 11 x 4.00-5, Smooth Tread
Position: 3
2 WELDMENT, Caster (Cardinal Red)
2 WELDMENT, Caster (Cardinal Red)
Position: 3
1 TANK BRACKET
1 TANK BRACKET
Position: 3
2 WASHER, .28 x .63 x .06 Flat, GR
2 WASHER, .28 x .63 x .06 Flat, GR
Position: 3
1 FOAM GRIP, Handle
1 FOAM GRIP, Handle
Position: 3
1 HOOK, Park Brake
1 HOOK, Park Brake
Position: 3
2 KNOB, Three Prong, 5/16-18 thread
2 KNOB, Three Prong, 5/16-18 thread
Position: 3
1 ASSEMBLY, Engine Pulley
1 ASSEMBLY, Engine Pulley
Position: 3
1 DECAL, Snapper Fender, LH
1 DECAL, Snapper Fender, LH
Position: 3
1 HANDLE GRIP, Black Flexible (Simplicity)
1 HANDLE GRIP, Black Flexible (Simplicity)
Position: 3
1 FITTING, Lube, Press-In (for .187 dia. Hole)
1 FITTING, Lube, Press-In (for .187 dia. Hole)
Position: 3
2 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
2 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
Position: 3
1 *WELDMENT, 38 Spindle Housing
1 *WELDMENT, 38 Spindle Housing
Position: 3
15 BOLT, 3/8-16 x 1” Hex Flange Lock, GR
15 BOLT, 3/8-16 x 1” Hex Flange Lock, GR
Position: 3
3 POST, Anti-Scalp
3 POST, Anti-Scalp
Position: 3
1 PULLEY, 5-1/4” O.D. w/hub
1 PULLEY, 5-1/4” O.D. w/hub
Position: 3
6 NUT, 1/4-20 Hex Flange Lock, GR
6 NUT, 1/4-20 Hex Flange Lock, GR
Position: 3
1 WIRING HARNESS, Hour Meter, RZT
1 WIRING HARNESS, Hour Meter, RZT
Position: 3
2 BALL BEARING, .625 x 1.38
2 BALL BEARING, .625 x 1.38
Position: 4
4 THRUST WASHER, 1” I.D.
4 THRUST WASHER, 1” I.D.
Position: 4
4 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
4 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
Position: 4
2 HAIR PIN, 1-1/8”
2 HAIR PIN, 1-1/8”
Position: 4
2 BUSHING
2 BUSHING
Position: 4
2 *BUSHING
2 *BUSHING
Position: 4
4 BOLT RETAINER, 5/16” Black
4 BOLT RETAINER, 5/16” Black
Position: 4
2 WASHER, 5/16” Split Lock
2 WASHER, 5/16” Split Lock
Position: 4
1 KEY, 1/4 Square x 1”
1 KEY, 1/4 Square x 1”
Position: 4
1 DECAL, Snapper
1 DECAL, Snapper
Position: 4
1 WELDMENT, Deck Lift, 38/42
1 WELDMENT, Deck Lift, 38/42
Position: 4
2 SPACER, 38 Spindle Pulley
2 SPACER, 38 Spindle Pulley
Position: 4
1 SPRING, Torsion-Side Discharge-38 Deck
1 SPRING, Torsion-Side Discharge-38 Deck
Position: 4
1 *FITTING, Lube, Press-In (for .187 dia. Hole)
1 *FITTING, Lube, Press-In (for .187 dia. Hole)
Position: 4
17 NUT, 3/8-16 Hex Flange Lock
17 NUT, 3/8-16 Hex Flange Lock
Position: 4
2 *RING, 1.85” Internal Retaining
2 *RING, 1.85” Internal Retaining
Position: 4
1 12 VOLT DC POWER OUTLET
1 12 VOLT DC POWER OUTLET
Position: 4
2 WIRE, Negative, #8 AWG 14”
2 WIRE, Negative, #8 AWG 14”
Position: 4
1 GREASE FITTING, 1/4-28 thread forming Alemite #3038-B
1 GREASE FITTING, 1/4-28 thread forming Alemite #3038-B
Position: 5
2 RETAINING RING, 1” External
2 RETAINING RING, 1” External
Position: 5
1 FOOTREST, Snapper (Cardinal Red)
1 FOOTREST, Snapper (Cardinal Red)
Position: 5
8 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR
8 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR
Position: 5
1 WELDMENT, Control Bracket, LH
1 WELDMENT, Control Bracket, LH
Position: 5
1 *WELDMENT, Control Bracket, LH
1 *WELDMENT, Control Bracket, LH
Position: 5
4 NUT, 5/16-18 Hex Large Flange Center Lock
4 NUT, 5/16-18 Hex Large Flange Center Lock
Position: 5
1 BRACKET, Seat Support
1 BRACKET, Seat Support
Position: 5
1 CLUTCH, Ogura JD-11
1 CLUTCH, Ogura JD-11
Position: 5
1 DECAL, Throttle Control, RZT
1 DECAL, Throttle Control, RZT
Position: 5
2 LINK, Leveling, 3/8-16 thread (2)
2 LINK, Leveling, 3/8-16 thread (2)
Position: 5
2 PULLEY, 5.0 O. D.
2 PULLEY, 5.0 O. D.
Position: 5
1 ROD, Pivot, Side Discharge, 38 Deck
1 ROD, Pivot, Side Discharge, 38 Deck
Position: 5
1 *SHAFT, Spindle (7.155” long)
1 *SHAFT, Spindle (7.155” long)
Position: 5
4 BOLT, 3/8-16 x 1” Square Neck Carriage, GR 5, YZ
4 BOLT, 3/8-16 x 1” Square Neck Carriage, GR 5, YZ
Position: 5
4 GAUGE WHEEL
4 GAUGE WHEEL
Position: 5
2 *BEARING, Spindle
2 *BEARING, Spindle
Position: 5
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 5
1 VALVE STEM, Snap In
1 VALVE STEM, Snap In
Position: 6
1 SCREW, 1/2-13 x 3-1/2” Hex Head Cap, YZ
1 SCREW, 1/2-13 x 3-1/2” Hex Head Cap, YZ
Position: 6
6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 6
2 SHOULDER BOLT, 5/16-18 .530 long shoulder
2 SHOULDER BOLT, 5/16-18 .530 long shoulder
Position: 6
1 WASHER, 5/8 ID x 1.00 OD x .065 Nylon
1 WASHER, 5/8 ID x 1.00 OD x .065 Nylon
Position: 6
1 WASHER, .64 x .99 x .05 Flat, YZ
1 WASHER, .64 x .99 x .05 Flat, YZ
Position: 6
1 *WASHER, 5/8 ID x 1.00 OD x .065 Nylon
1 *WASHER, 5/8 ID x 1.00 OD x .065 Nylon
Position: 6
1 COVER, Front, Snapper
1 COVER, Front, Snapper
Position: 6
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 6
1 WASHER, .468 ID x 1.50 OD x .188 Flat
1 WASHER, .468 ID x 1.50 OD x .188 Flat
Position: 6
1 DECAL, Warning, Operation
1 DECAL, Warning, Operation
Position: 6
8 WASHER, 3/8” Flat SAE
8 WASHER, 3/8” Flat SAE
Position: 6
2 NUT, 5/8-18 Hex Jam
2 NUT, 5/8-18 Hex Jam
Position: 6
1 NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
1 NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
Position: 6
1 *WASHER, Spindle Blade
1 *WASHER, Spindle Blade
Position: 6
2 SPINDLE BRACE
2 SPINDLE BRACE
Position: 6
4 BOLT, Gauge Wheel (3/8-16 thread)
4 BOLT, Gauge Wheel (3/8-16 thread)
Position: 6
1 *SHAFT, Blade Spindle (6.500 overall length)
1 *SHAFT, Blade Spindle (6.500 overall length)
Position: 6
1 HOUR METER, Inductive
1 HOUR METER, Inductive
Position: 6
2 SCREW, 7/16-14 x 6”, Hex Head Cap, GR
2 SCREW, 7/16-14 x 6”, Hex Head Cap, GR
Position: 7
2 WASHER, 1/2” SAE Flat
2 WASHER, 1/2” SAE Flat
Position: 7
1 PLATE, Rear Seat Guard
1 PLATE, Rear Seat Guard
Position: 7
12 NUT, 5/16-18 Hex Nyloc
12 NUT, 5/16-18 Hex Nyloc
Position: 7
1 WASHER, 5/8” Flat SAE
1 WASHER, 5/8” Flat SAE
Position: 7
1 *WASHER, 5/8” Flat SAE
1 *WASHER, 5/8” Flat SAE
Position: 7
2 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap, YZ
2 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap, YZ
Position: 7
2 WASHER, 3/8” Internal Tooth Lock
2 WASHER, 3/8” Internal Tooth Lock
Position: 7
1 WASHER, 7/16” Split Lock
1 WASHER, 7/16” Split Lock
Position: 7
1 DECAL, Height Of Cut, RZT
1 DECAL, Height Of Cut, RZT
Position: 7
6 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
6 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
Position: 7
14 BOLT, 5/16-18 x 3/4” Hex Flange Lock
14 BOLT, 5/16-18 x 3/4” Hex Flange Lock
Position: 7
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 7
1 *BLADE, 19.64 (38” Deck)
1 *BLADE, 19.64 (38” Deck)
Position: 7
2 ASSEMBLY, Spindle Lock w/strux nut
2 ASSEMBLY, Spindle Lock w/strux nut
Position: 7
1 BRACKET, Wheel
1 BRACKET, Wheel
Position: 7
1 *WELDMENT, Spindle Housing
1 *WELDMENT, Spindle Housing
Position: 7
1 SWITCH, PTO, Yellow
1 SWITCH, PTO, Yellow
Position: 7
2 TUBE, 5/8 O.D. x 14 Ga. Wall x 4.510” long caster wheel spacer
2 TUBE, 5/8 O.D. x 14 Ga. Wall x 4.510” long caster wheel spacer
Position: 8
2 SPACER, Axle Pivot
2 SPACER, Axle Pivot
Position: 8
8 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
8 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 8
1 TRANSAXLE, LH RZT
1 TRANSAXLE, LH RZT
Position: 8
1 WASHER, .64 x 1.12 x .028 Beveled
1 WASHER, .64 x 1.12 x .028 Beveled
Position: 8
1 WELDMENT, Control Bracket, RH
1 WELDMENT, Control Bracket, RH
Position: 8
1 *WASHER, .64 x 1.12 x .028 Beveled
1 *WASHER, .64 x 1.12 x .028 Beveled
Position: 8
1 PANEL, Control
1 PANEL, Control
Position: 8
2 NUT, 3/8-16 Hex Flange Lock
2 NUT, 3/8-16 Hex Flange Lock
Position: 8
1 SCREW, 7/16-20 x 4-1/2” Hex Head Cap, GR
1 SCREW, 7/16-20 x 4-1/2” Hex Head Cap, GR
Position: 8
1 DECAL, Motion Control, RZT
1 DECAL, Motion Control, RZT
Position: 8
4 SCREW, 1/4-20 x 5/8” Hex Head Cap. GR
4 SCREW, 1/4-20 x 5/8” Hex Head Cap. GR
Position: 8
19 NUT, 5/16-18 Hex Flange Lock, GR
19 NUT, 5/16-18 Hex Flange Lock, GR
Position: 8
1 SCREW, 5/16-18 x 5/8” Cross Recessed Pan Head
1 SCREW, 5/16-18 x 5/8” Cross Recessed Pan Head
Position: 8
2 *WASHER, Bellville 9/16 x 1-3/4”
2 *WASHER, Bellville 9/16 x 1-3/4”
Position: 8
1 WELDMENT, Stationary Idler 42”
1 WELDMENT, Stationary Idler 42”
Position: 8
8 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR 5 YZ
8 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR 5 YZ
Position: 8
1 *BLADE HOLDER
1 *BLADE HOLDER
Position: 8
1 PLUG, Plastic Black
1 PLUG, Plastic Black
Position: 8
2 NUT, 7/16-14 Hex Center Lock, GR 5 or B
2 NUT, 7/16-14 Hex Center Lock, GR 5 or B
Position: 9
2 BEARING SLEEVE
2 BEARING SLEEVE
Position: 9
1 HEAT SHIELD finish: black powder coat
1 HEAT SHIELD finish: black powder coat
Position: 9
1 TRANSAXLE, RH RZT
1 TRANSAXLE, RH RZT
Position: 9
2 NUT, 5/8-18 Hex Jam
2 NUT, 5/8-18 Hex Jam
Position: 9
2 *NUT, 5/8-18 Hex Jam
2 *NUT, 5/8-18 Hex Jam
Position: 9
5 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
5 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
Position: 9
2 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
2 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
Position: 9
1 HOSE, Oil Drain
1 HOSE, Oil Drain
Position: 9
1 DECAL, Park Brake, RZT
1 DECAL, Park Brake, RZT
Position: 9
4 NUT, 1/4-20 Hex Nyloc
4 NUT, 1/4-20 Hex Nyloc
Position: 9
1 BRACKET, Front, 38” RZT
1 BRACKET, Front, 38” RZT
Position: 9
1 WASHER, .34 x .69 x .08 Flat
1 WASHER, .34 x .69 x .08 Flat
Position: 9
1 *NUT, 9/16-18 Hex, GR B
1 *NUT, 9/16-18 Hex, GR B
Position: 9
1 NUT, 3/8-24 Hex Center Lock
1 NUT, 3/8-24 Hex Center Lock
Position: 9
8 NUT, 3/8-16 Hex Flange Lock
8 NUT, 3/8-16 Hex Flange Lock
Position: 9
1 BLADE, 21” Standard Lift
1 BLADE, 21” Standard Lift
Position: 9
1 SWITCH, Seat (NC)
1 SWITCH, Seat (NC)
Position: 9
2 ASS'Y, 18 x 6.50-8 Tire/Wheel, Turf-Master used on RZT185380BVE
2 ASS'Y, 18 x 6.50-8 Tire/Wheel, Turf-Master used on RZT185380BVE
Position: 10
1 NUT, 1/2-13 Hex Center Lock, GR 5, YZ
1 NUT, 1/2-13 Hex Center Lock, GR 5, YZ
Position: 10
2 BRACKET, Body Support
2 BRACKET, Body Support
Position: 10
1 BRACKET, Anti-Rotation
1 BRACKET, Anti-Rotation
Position: 10
1 SHOULDER BOLT, 3/8-16 2.013 long shoulder
1 SHOULDER BOLT, 3/8-16 2.013 long shoulder
Position: 10
1 WASHER, 5/8 SAE Flat
1 WASHER, 5/8 SAE Flat
Position: 10
1 *SHOULDER BOLT, 3/8-16
1 *SHOULDER BOLT, 3/8-16
Position: 10
3 U-NUT 1/4-20
3 U-NUT 1/4-20
Position: 10
2 SPRING, Compression- Seat Support
2 SPRING, Compression- Seat Support
Position: 10
1 HARNESS CLIP, 5/8”
1 HARNESS CLIP, 5/8”
Position: 10
1 DECAL, Roll Release, RZT
1 DECAL, Roll Release, RZT
Position: 10
2 BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR
2 BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR
Position: 10
1 TEENUT, 5/16-18 Thread
1 TEENUT, 5/16-18 Thread
Position: 10
2 BOLT, 5/16-18 x 1” Short Square Neck Carriage, GR
2 BOLT, 5/16-18 x 1” Short Square Neck Carriage, GR
Position: 10
2 WASHER, Cone
2 WASHER, Cone
Position: 10
2 SWITCH- DPDT
2 SWITCH- DPDT
Position: 10
1 RIM, 18 x 6.50, 4 Bolt
1 RIM, 18 x 6.50, 4 Bolt
Position: 11
2 SCREW, 7/16-20 x 2-1/2” Hex Head Cap, GR 5 (Special Head)
2 SCREW, 7/16-20 x 2-1/2” Hex Head Cap, GR 5 (Special Head)
Position: 11
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
Position: 11
1 PIN, Anti-Rotation, RZT Clutch
1 PIN, Anti-Rotation, RZT Clutch
Position: 11
1 THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
1 THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
Position: 11
1 *THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
1 *THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
Position: 11
1 BRKT, RH Fender Support (Cardinal Red)
1 BRKT, RH Fender Support (Cardinal Red)
Position: 11
4 NUT, 5/16-18 Hex Nyloc
4 NUT, 5/16-18 Hex Nyloc
Position: 11
1 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR
1 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR
Position: 11
1 DECAL, Chute/Deflector
1 DECAL, Chute/Deflector
Position: 11
1 FLANGE BEARING, 3/4” I.D. powdered metal
1 FLANGE BEARING, 3/4” I.D. powdered metal
Position: 11
1 BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, GR
1 BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, GR
Position: 11
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5, YZ
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5, YZ
Position: 11
2 WASHER, .531 x 1.0 x .063 Flat
2 WASHER, .531 x 1.0 x .063 Flat
Position: 11
1 ASSEMBLY, 42” Chute & Decal Cardinal red w/Decal
1 ASSEMBLY, 42” Chute & Decal Cardinal red w/Decal
Position: 11
2 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR
2 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR
Position: 11
1 BATTERY BRACKET
1 BATTERY BRACKET
Position: 11
1 TIRE, 18 x 6.50-8, Turf Master
1 TIRE, 18 x 6.50-8, Turf Master
Position: 12
4 WASHER, .47 x .92 x .065 Flat
4 WASHER, .47 x .92 x .065 Flat
Position: 12
2 BRACE, Hood/Fender
2 BRACE, Hood/Fender
Position: 12
1 NUT, 5/16-18 Hex Flange Lock, GR
1 NUT, 5/16-18 Hex Flange Lock, GR
Position: 12
2 FLANGE BEARING, 9/16 I.D. P.M. powdered metal
2 FLANGE BEARING, 9/16 I.D. P.M. powdered metal
Position: 12
2 *FLANGE BEARING, 9/16 I.D. P.M.
2 *FLANGE BEARING, 9/16 I.D. P.M.
Position: 12
2 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
2 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 12
1 ROD, Seat Hinge
1 ROD, Seat Hinge
Position: 12
1 CABLE, 26.25” Throttle Control
1 CABLE, 26.25” Throttle Control
Position: 12
1 CABLE, 48” Throttle Control B&S 16HP Single Intek
1 CABLE, 48” Throttle Control B&S 16HP Single Intek
Position: 12
2 DECAL, Danger, (Cut Finger)
2 DECAL, Danger, (Cut Finger)
Position: 12
4 JAM NUT, 3/8-16, YZ
4 JAM NUT, 3/8-16, YZ
Position: 12
1 WELDMENT, Idler Bracket
1 WELDMENT, Idler Bracket
Position: 12
1 WELDMENT, Idler Arm, 38” RZT (Cardinal Red)
1 WELDMENT, Idler Arm, 38” RZT (Cardinal Red)
Position: 12
1 *LUBE FITTING, 3/16” Press-In
1 *LUBE FITTING, 3/16” Press-In
Position: 12
1 BATTERY HOLD DOWN
1 BATTERY HOLD DOWN
Position: 12
2 ASS'Y, 18 x 8.50-8 Tire/Wheel, Turf-Master used on RZT20420BVE2
2 ASS'Y, 18 x 8.50-8 Tire/Wheel, Turf-Master used on RZT20420BVE2
Position: 13
2 NUT, 7/16-20 Hex Center Lock Jam, GR 5 or B
2 NUT, 7/16-20 Hex Center Lock Jam, GR 5 or B
Position: 13
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position: 13
2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
Position: 13
4 *NUT, 3/8-16 Hex Nyloc
4 *NUT, 3/8-16 Hex Nyloc
Position: 13
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position: 13
1 COTTER PIN, 3/8” Self-Locking
1 COTTER PIN, 3/8” Self-Locking
Position: 13
1 KNOB, Throttle, Red RZT
1 KNOB, Throttle, Red RZT
Position: 13
1 DECAL, 250 Z 18.5HP RZT
1 DECAL, 250 Z 18.5HP RZT
Position: 13
2 SWIVEL, Inline Brake Arm
2 SWIVEL, Inline Brake Arm
Position: 13
3 BOLT, 3/8-16 x 3/4” Short Square Neck Carriage, GR
3 BOLT, 3/8-16 x 3/4” Short Square Neck Carriage, GR
Position: 13
1 PULLEY, Flat Idler, 3-1/4” Dia.
1 PULLEY, Flat Idler, 3-1/4” Dia.
Position: 13
1 LUBE FITTING, 3/16” or
1 LUBE FITTING, 3/16” or
Position: 13
2 VINYL CAP
2 VINYL CAP
Position: 13
1 SWITCH, Ignition-Afterfire Solenoid includes set of keys
1 SWITCH, Ignition-Afterfire Solenoid includes set of keys
Position: 13
1 RIM, 18 x 8.50, 4 Bolt
1 RIM, 18 x 8.50, 4 Bolt
Position: 14
1 BRACKET, Quick Hitch
1 BRACKET, Quick Hitch
Position: 14
4 SCREW, 5/16-18 x 3” Hex Head Cap, GR 5, YZ
4 SCREW, 5/16-18 x 3” Hex Head Cap, GR 5, YZ
Position: 14
1 SHOULDER BOLT, 5/16 x 1/4-20 .800 long shoulder
1 SHOULDER BOLT, 5/16 x 1/4-20 .800 long shoulder
Position: 14
1 *SHOULDER BOLT, 5/16 x 1/4-20
1 *SHOULDER BOLT, 5/16 x 1/4-20
Position: 14
1 COVER, Engine, Double Vent
1 COVER, Engine, Double Vent
Position: 14
2 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
2 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
Position: 14
1 SCREW, #10-16 x 3/4” Pan Head Self-Tap
1 SCREW, #10-16 x 3/4” Pan Head Self-Tap
Position: 14
1 DECAL, 250 Z 20HP RZT
1 DECAL, 250 Z 20HP RZT
Position: 14
2 PIN, Quick Hitch
2 PIN, Quick Hitch
Position: 14
1 WELDMENT, 38” Deck Support, RH
1 WELDMENT, 38” Deck Support, RH
Position: 14
1 SPRING, Extension, 1.03 Dia. x 6.8 Long
1 SPRING, Extension, 1.03 Dia. x 6.8 Long
Position: 14
1 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
1 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
Position: 14
2 BOLT, 5/16-18 x 5/8” Short Square Neck Carriage, GR
2 BOLT, 5/16-18 x 5/8” Short Square Neck Carriage, GR
Position: 14
1 MACHINERY BUSHING
1 MACHINERY BUSHING
Position: 14
1 TIRE, 18 x 8.50-8, Turf Master
1 TIRE, 18 x 8.50-8, Turf Master
Position: 15
2 SWIVEL, 3/8-16 Inline
2 SWIVEL, 3/8-16 Inline
Position: 15
1 SPRING, Torsion, RH Wind
1 SPRING, Torsion, RH Wind
Position: 15
8 SHIM WASHER, 5/16” I.D.
8 SHIM WASHER, 5/16” I.D.
Position: 15
1 DAMPENER, Hydraulic
1 DAMPENER, Hydraulic
Position: 15
1 TRACK, Control Stick, L.H.
1 TRACK, Control Stick, L.H.
Position: 15
1 *DAMPENER, Hydraulic
1 *DAMPENER, Hydraulic
Position: 15
2 WASHER, 1/4” Internal/External Tooth Lock
2 WASHER, 1/4” Internal/External Tooth Lock
Position: 15
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
Position: 15
2 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
2 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
Position: 15
1 DECAL, 38 Inch
1 DECAL, 38 Inch
Position: 15
2 BAR, Rear Lift, 38/42
2 BAR, Rear Lift, 38/42
Position: 15
1 WELDMENT, 38” Deck Support, LH
1 WELDMENT, 38” Deck Support, LH
Position: 15
1 GAGE WHEEL BRACKET, LH Rear
1 GAGE WHEEL BRACKET, LH Rear
Position: 15
1 BOLT,1/4-20 x 1-1/8” Hex Flange Lock, GR
1 BOLT,1/4-20 x 1-1/8” Hex Flange Lock, GR
Position: 15
2 BOLT RETAINER, 5/16” Black
2 BOLT RETAINER, 5/16” Black
Position: 15
1 BEZEL
1 BEZEL
Position: 15
8 LUG NUT 1/2-20 Tapered Seat YZ
8 LUG NUT 1/2-20 Tapered Seat YZ
Position: 16
2 WASHER, 13/32 x 1-1/4” Flat
2 WASHER, 13/32 x 1-1/4” Flat
Position: 16
1 WELDMENT, Hydro Idler
1 WELDMENT, Hydro Idler
Position: 16
4 SCREW 5/16-18 x 2-3/4” Hex Head Cap, GR 5, YZ
4 SCREW 5/16-18 x 2-3/4” Hex Head Cap, GR 5, YZ
Position: 16
1 SPACER, 9/16 OD x 12GA x .325
1 SPACER, 9/16 OD x 12GA x .325
Position: 16
1 WELDMENT, Lift Bracket
1 WELDMENT, Lift Bracket
Position: 16
1 *SPACER, 9/16 OD x 12GA x .325
1 *SPACER, 9/16 OD x 12GA x .325
Position: 16
2 KNOB (1/4-20 thread)
2 KNOB (1/4-20 thread)
Position: 16
2 WASHER, 5/16” Split Lock
2 WASHER, 5/16” Split Lock
Position: 16
1 CABLE, 30” Choke Control
1 CABLE, 30” Choke Control
Position: 16
1 CABLE, 54” Choke Control
1 CABLE, 54” Choke Control
Position: 16
1 DECAL - 42 INCH
1 DECAL - 42 INCH
Position: 16
4 HAIR PIN, 3/32 x 1-1/2”
4 HAIR PIN, 3/32 x 1-1/2”
Position: 16
3 NUT, 3/8-16 Hex Flange Lock
3 NUT, 3/8-16 Hex Flange Lock
Position: 16
9 BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR
9 BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR
Position: 16
1 SPACER, .265 I.D. x .375 O.D. x .300 thick
1 SPACER, .265 I.D. x .375 O.D. x .300 thick
Position: 16
4 WASHER, .28 x .63 x .06 Flat, GR
4 WASHER, .28 x .63 x .06 Flat, GR
Position: 16
2 NUT, 3/8-16 Hex Nyloc
2 NUT, 3/8-16 Hex Nyloc
Position: 17
1 SPACER, Hydro Idler
1 SPACER, Hydro Idler
Position: 17
2 BRACKET, Transaxle Support
2 BRACKET, Transaxle Support
Position: 17
2 WASHER, 1/4” I.D. Flat case hardened steel
2 WASHER, 1/4” I.D. Flat case hardened steel
Position: 17
2 *WASHER, 1/4” I.D. Flat
2 *WASHER, 1/4” I.D. Flat
Position: 17
1 GUARD, Rear Seat
1 GUARD, Rear Seat
Position: 17
2 WASHER, .34 x 1.0 x .09 Flat
2 WASHER, .34 x 1.0 x .09 Flat
Position: 17
1 WASHER, 3/8” Internal Tooth Lock
1 WASHER, 3/8” Internal Tooth Lock
Position: 17
1 DECAL, OPEI Walk/Ride not shown, not a service part
1 DECAL, OPEI Walk/Ride not shown, not a service part
Position: 17
2 SHOULDER BOLT, 3/8-24, GR 8 .285” long shoulder
2 SHOULDER BOLT, 3/8-24, GR 8 .285” long shoulder
Position: 17
1 SCREW, 3/8-16 x 1” Hex Head Cap, GR
1 SCREW, 3/8-16 x 1” Hex Head Cap, GR
Position: 17
9 NUT, 5/16-18 Hex Flange Lock, GR
9 NUT, 5/16-18 Hex Flange Lock, GR
Position: 17
2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
Position: 17
2 WING LOCKNUT, 5/16-18- YZ
2 WING LOCKNUT, 5/16-18- YZ
Position: 17
3 NUT, 1/4-20 Hex Center Lock, GR 5 or B
3 NUT, 1/4-20 Hex Center Lock, GR 5 or B
Position: 17
1 BRACKET, Axle (Cardinal Red)
1 BRACKET, Axle (Cardinal Red)
Position: 18
1 WASHER, .531 x 1.062 x .121 Flat, YZ
1 WASHER, .531 x 1.062 x .121 Flat, YZ
Position: 18
1 V-BELT, HA Sect. (wrapped) 58.00 effective length hydro drive
1 V-BELT, HA Sect. (wrapped) 58.00 effective length hydro drive
Position: 18
2 NUT, 1/4-20 Hex Nyloc
2 NUT, 1/4-20 Hex Nyloc
Position: 18
6 NUT, 1/4-20 Hex Nyloc YZ
6 NUT, 1/4-20 Hex Nyloc YZ
Position: 18
2 HWST 1/4-15x1 1/4
2 HWST 1/4-15x1 1/4
Position: 18
2 SPACER, .340 I.D. x .63 O.D. x .310 Thick
2 SPACER, .340 I.D. x .63 O.D. x .310 Thick
Position: 18
1 NUT, 3/8-24 Hex, GR B
1 NUT, 3/8-24 Hex, GR B
Position: 18
2 BRACKET, Deck Hanger
2 BRACKET, Deck Hanger
Position: 18
2 WASHER, 3/8” Flat SAE
2 WASHER, 3/8” Flat SAE
Position: 18
3 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
3 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
Position: 18
5 WASHER, .27 x 1.0 x .065 Flat
5 WASHER, .27 x 1.0 x .065 Flat
Position: 18
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 YZ or 7091553 (1-3/4” long)
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 YZ or 7091553 (1-3/4” long)
Position: 18
2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR
2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR
Position: 18
6 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
6 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
Position: 19
1 SCREW 1/2-13 x 2-1/2” Hex Head Cap, GR 5 (Black Phosphate)
1 SCREW 1/2-13 x 2-1/2” Hex Head Cap, GR 5 (Black Phosphate)
Position: 19
1 SHOULDER BOLT, 5/16 x 1/4-20 1.360 long shoulder
1 SHOULDER BOLT, 5/16 x 1/4-20 1.360 long shoulder
Position: 19
1 BRACKET, Switch
1 BRACKET, Switch
Position: 19
1 *SHOULDER BOLT, 5/16 x 1/4-20
1 *SHOULDER BOLT, 5/16 x 1/4-20
Position: 19
1 BRACKET, Lower Seat
1 BRACKET, Lower Seat
Position: 19
3 CABLE TIE, 7”
3 CABLE TIE, 7”
Position: 19
2 NUT, 3/8-24 Hex Center Lock
2 NUT, 3/8-24 Hex Center Lock
Position: 19
2 WASHER, Special
2 WASHER, Special
Position: 19
3 WHEEL 4 x 1-1/2” Offset
3 WHEEL 4 x 1-1/2” Offset
Position: 19
1 PULLEY, Flat Idler 4-1/8” Dia.
1 PULLEY, Flat Idler 4-1/8” Dia.
Position: 19
1 BATTERY, 12 VOLT, 230 CCA
1 BATTERY, 12 VOLT, 230 CCA
Position: 19
6 NUT, 5/16-18 Hex Flange Lock, GR
6 NUT, 5/16-18 Hex Flange Lock, GR
Position: 20
1 IDLER, 3.25” OD x .391 ID x 1.63 Backside
1 IDLER, 3.25” OD x .391 ID x 1.63 Backside
Position: 20
1 SPACER, 9/16 OD x 12GA x .899
1 SPACER, 9/16 OD x 12GA x .899
Position: 20
1 SWITCH- DPDT also shown in Electrical Group
1 SWITCH- DPDT also shown in Electrical Group
Position: 20
1 *SPACER, 9/16 OD x 12GA x .899
1 *SPACER, 9/16 OD x 12GA x .899
Position: 20
2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
Position: 20
1 MANIFOLD, 18 HP B&S Intek
1 MANIFOLD, 18 HP B&S Intek
Position: 20
1 MANIFOLD, B&S V-Twin Intek
1 MANIFOLD, B&S V-Twin Intek
Position: 20
1 SPACER, .380 I. D. x .895 long
1 SPACER, .380 I. D. x .895 long
Position: 20
3 NUT, 3/8-24 Hex Center Lock
3 NUT, 3/8-24 Hex Center Lock
Position: 20
8 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
8 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 21
1 WASHER, 3/8” Flat SAE
1 WASHER, 3/8” Flat SAE
Position: 21
2 SCREW, 1/4-20 x1-1/4” Hex Head Cap, GR
2 SCREW, 1/4-20 x1-1/4” Hex Head Cap, GR
Position: 21
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
Position: 21
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
Position: 21
1 MUFFLER, RZT
1 MUFFLER, RZT
Position: 21
4 NUT, 5/16-18 Hex Flange Lock, GR
4 NUT, 5/16-18 Hex Flange Lock, GR
Position: 21
1 RETAINER, 3/8” Bolt
1 RETAINER, 3/8” Bolt
Position: 21
1 GAGE WHEEL BRACKET, Front
1 GAGE WHEEL BRACKET, Front
Position: 21
1 SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR 5 YZ
1 SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR 5 YZ
Position: 21
20 NUT, 5/16-18 Hex Top Lock, GR B
20 NUT, 5/16-18 Hex Top Lock, GR B
Position: 22
1 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
1 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
Position: 22
2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
Position: 22
1 SWITCH- DPDT also shown in Electrical Group
1 SWITCH- DPDT also shown in Electrical Group
Position: 22
1 GASKET, Exhaust
1 GASKET, Exhaust
Position: 22
2 GASKET, Exhaust, 20 HP Intek
2 GASKET, Exhaust, 20 HP Intek
Position: 22
1 ROD, Deck Hanger Front 38/42
1 ROD, Deck Hanger Front 38/42
Position: 22
1 PULLEY, Flat Idler 5.0 x .375 belt clutch
1 PULLEY, Flat Idler 5.0 x .375 belt clutch
Position: 22
1 GAGE WHEEL BRACKET, Right Front
1 GAGE WHEEL BRACKET, Right Front
Position: 22
1 PULLEY, Flat Idler (4.00 O.D.)
1 PULLEY, Flat Idler (4.00 O.D.)
Position: 22
2 PLATE, Friction
2 PLATE, Friction
Position: 23
1 MAT, Foot Rest RZT
1 MAT, Foot Rest RZT
Position: 23
6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 23
1 NUT, 5/16-18 Hex Nyloc
1 NUT, 5/16-18 Hex Nyloc
Position: 23
3 WASHER, 5/16” Split Lock
3 WASHER, 5/16” Split Lock
Position: 23
5 WASHER, 5/16” Split Lock
5 WASHER, 5/16” Split Lock
Position: 23
1 BELT, A Sect., Effective Length 114” (not shown) SMI 44” Regent
1 BELT, A Sect., Effective Length 114” (not shown) SMI 44” Regent
Position: 23
1 42” BELT, A Section, 119.25 Effective Length not shown
1 42” BELT, A Section, 119.25 Effective Length not shown
Position: 23
8 SCREW, 5/16-18 x 1” Flat Head Countersunk
8 SCREW, 5/16-18 x 1” Flat Head Countersunk
Position: 24
1 MAT, Floor Pan
1 MAT, Floor Pan
Position: 24
1 PLATE, Fwd/Rev Adjust
1 PLATE, Fwd/Rev Adjust
Position: 24
1 BRACKET, Park Brake, LH Lower
1 BRACKET, Park Brake, LH Lower
Position: 24
2 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
2 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
Position: 24
4 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
4 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
Position: 24
1 NUT, 3/8-24 Hex Center lock
1 NUT, 3/8-24 Hex Center lock
Position: 24
2 BRACKET, Axle Support
2 BRACKET, Axle Support
Position: 25
1 TRACK, Control Stick R.H.
1 TRACK, Control Stick R.H.
Position: 25
1 BRACKET, Park Brake, RH Lower
1 BRACKET, Park Brake, RH Lower
Position: 25
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 25
5 SCREW, 1/4-20 x 3/4” Hex Head Flange, GR 5, YZ
5 SCREW, 1/4-20 x 3/4” Hex Head Flange, GR 5, YZ
Position: 25
2 WASHER, .531 x 1.0 x .063 Flat
2 WASHER, .531 x 1.0 x .063 Flat
Position: 25
8 WASHER, .34 x .69 x .08 Flat
8 WASHER, .34 x .69 x .08 Flat
Position: 26
1 CONTROL BRACKET, LH
1 CONTROL BRACKET, LH
Position: 26
1 WASHER, 1/2 x .090 Flat
1 WASHER, 1/2 x .090 Flat
Position: 26
1 BRACKET, Muffler 18HP Briggs
1 BRACKET, Muffler 18HP Briggs
Position: 26
1 BRACKET, Muffler 20/22HP Briggs
1 BRACKET, Muffler 20/22HP Briggs
Position: 26
1 WELDMENT, Idler Arm, 38” RZT
1 WELDMENT, Idler Arm, 38” RZT
Position: 26
4 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
4 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
Position: 27
4 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
4 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 27
1 WASHER, .531 x 1.0 x .063 Flat
1 WASHER, .531 x 1.0 x .063 Flat
Position: 27
1 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR
1 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR
Position: 27
1 LUBE FITTING, 3/16”
1 LUBE FITTING, 3/16”
Position: 27
4 NUT, 3/8-16 Hex Flange Lock
4 NUT, 3/8-16 Hex Flange Lock
Position: 28
1 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
1 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
Position: 28
1 IDLER STUD (5/16-24 thread)
1 IDLER STUD (5/16-24 thread)
Position: 28
1 BRACKET, Rod Holder, RZT
1 BRACKET, Rod Holder, RZT
Position: 29
2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
Position: 29
1 WASHER, 1/4” Split Lock
1 WASHER, 1/4” Split Lock
Position: 29
1 COTTER PIN, 3/32 x 3/4”
1 COTTER PIN, 3/32 x 3/4”
Position: 29
2 POP RIVET, 1/8 x 3/8”
2 POP RIVET, 1/8 x 3/8”
Position: 30
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position: 30
1 NUT, 1/4-20 Hex, GR 5 or B
1 NUT, 1/4-20 Hex, GR 5 or B
Position: 30
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR
Position: 30
1 ROD END
1 ROD END
Position: 31
1 *ROD END
1 *ROD END
Position: 31
1 ASSEMBLY, Clamp B&S P/N's 223434, 93877 &
1 ASSEMBLY, Clamp B&S P/N's 223434, 93877 &
Position: 31
2 WASHER, 3/8” Flat
2 WASHER, 3/8” Flat
Position: 31
1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
Position: 32
1 *SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
1 *SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
Position: 32
1 ASSEMBLY, Fuel Tank, RZT includes items 33 thru
1 ASSEMBLY, Fuel Tank, RZT includes items 33 thru
Position: 32
1 NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
1 NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
Position: 32
3 NUT, 3/8-24 Hex, GR B, YZ
3 NUT, 3/8-24 Hex, GR B, YZ
Position: 33
3 *NUT, 3/8-24 Hex, GR B, YZ
3 *NUT, 3/8-24 Hex, GR B, YZ
Position: 33
1 FUEL TANK
1 FUEL TANK
Position: 33
3 WASHER, 3/8” Flat
3 WASHER, 3/8” Flat
Position: 34
3 WASHER, 3/8” Flat
3 WASHER, 3/8” Flat
Position: 34
1 DIP TUBE
1 DIP TUBE
Position: 34
1 SPRING, Compression (Brake)
1 SPRING, Compression (Brake)
Position: 35
1 *SPRING, Compression (Brake)
1 *SPRING, Compression (Brake)
Position: 35
1 GROMMET
1 GROMMET
Position: 35
1 ROD, Link Fwd./Rev. (3/8-24 thread)
1 ROD, Link Fwd./Rev. (3/8-24 thread)
Position: 36
1 *ROD, Link Fwd./Rev. (3/8-24 thread)
1 *ROD, Link Fwd./Rev. (3/8-24 thread)
Position: 36
1 ELBOW, 90 Degree
1 ELBOW, 90 Degree
Position: 36
1 CLEVIS PIN, 7/16 x 1”
1 CLEVIS PIN, 7/16 x 1”
Position: 37
1 *CLEVIS PIN, 7/16 x 1”
1 *CLEVIS PIN, 7/16 x 1”
Position: 37
1 CAP, Fuel, 3-1/2”
1 CAP, Fuel, 3-1/2”
Position: 37
1 COTTER PIN, 1/2 Self Locking, YZ
1 COTTER PIN, 1/2 Self Locking, YZ
Position: 38
3 COTTER PIN, 1/2 Self Locking, YZ
3 COTTER PIN, 1/2 Self Locking, YZ
Position: 38
4 CLAMP, Fuel Line
4 CLAMP, Fuel Line
Position: 38
1 CLIP, Spring
1 CLIP, Spring
Position: 39
1 COTTER PIN, 3/8” Self-Locking
1 COTTER PIN, 3/8” Self-Locking
Position: 39
2 HOSE, Fuel, 5”
2 HOSE, Fuel, 5”
Position: 39
2 HOSE, Fuel, .25 I.D. x 14” long
2 HOSE, Fuel, .25 I.D. x 14” long
Position: 39
2 SCREW, 1/4-20 x 3/4" Hex Washer Self-Tap
2 SCREW, 1/4-20 x 3/4" Hex Washer Self-Tap
Position: 40
2 WASHER, .28 x .63 x .06 Flat, GR
2 WASHER, .28 x .63 x .06 Flat, GR
Position: 40
1 VALVE, Fuel Shut-Off
1 VALVE, Fuel Shut-Off
Position: 40
1 ROD, Park Brake (1/4-20 thread)
1 ROD, Park Brake (1/4-20 thread)
Position: 41
1 SEAL, Tank
1 SEAL, Tank
Position: 41
1 SPRING, Compression
1 SPRING, Compression
Position: 42
1 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
1 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
Position: 42
1 BRACKET, Park Brake
1 BRACKET, Park Brake
Position: 43
2 WASHER, .34 x .69 x .08 Flat
2 WASHER, .34 x .69 x .08 Flat
Position: 43
1 NUT, 1/4-20 Hex Top Lock, GR B
1 NUT, 1/4-20 Hex Top Lock, GR B
Position: 44
1 NUT, 5/16-18 Hex, GR 5 or B
1 NUT, 5/16-18 Hex, GR 5 or B
Position: 44
1 ROD, Hanger (1/4-20 both ends)
1 ROD, Hanger (1/4-20 both ends)
Position: 45
1 TUBE, Manifold Extension
1 TUBE, Manifold Extension
Position: 45
2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR
2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR
Position: 46
1 Bracket, Fuel :Pump Briggs part
1 Bracket, Fuel :Pump Briggs part
Position: 46
1 ROD, Park Brake
1 ROD, Park Brake
Position: 47
2 WASHER, 3/8” Flat SAE
2 WASHER, 3/8” Flat SAE
Position: 48
6 *SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
6 *SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 49
1 *PLATE, Fwd/Rev Adjust
1 *PLATE, Fwd/Rev Adjust
Position: 50
1 *TRACK, Control Stick R.H.
1 *TRACK, Control Stick R.H.
Position: 51
1 *CONTROL BRACKET, LH
1 *CONTROL BRACKET, LH
Position: 52
4 *SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
4 *SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 53
4 *NUT, 3/8-16 Hex Flange Lock
4 *NUT, 3/8-16 Hex Flange Lock
Position: 54
1 *BRACKET, Rod Holder, RZT
1 *BRACKET, Rod Holder, RZT
Position: 55
2 *POP RIVET, 1/8 x 3/8”
2 *POP RIVET, 1/8 x 3/8”
Position: 56
1 *CLIP, Spring
1 *CLIP, Spring
Position: 57