Exploded view sn 250 z SNAPPER sn250z

Discover the complete exploded view sn 250 z SNAPPER sn250z, an essential guide to easily identify all spare parts of your appliance. Whether you are looking for a specific part or need help with the repair, our detailed presentation helps you understand each component of your sn 250 z. Quickly find the parts you need to extend the life of your sn 250 z SNAPPER sn250z and avoid unexpected breakdowns.

Repair Assistant Powered by ChatGPT

Spare Parts List

2 ASSEMBLY, Front Wheel & Tire
2 ASSEMBLY, Front Wheel & Tire
Position: 1
1 FRONT AXLE, Cast (Cardinal Red)
1 FRONT AXLE, Cast (Cardinal Red)
Position: 1
1 FRAME, RZT (Cardinal Red)
1 FRAME, RZT (Cardinal Red)
Position: 1
1 WELDMENT, Transaxle Support
1 WELDMENT, Transaxle Support
Position: 1
1 HANDLE
1 HANDLE
Position: 1
1 NUT, 10-24 Hex Nyloc
1 NUT, 10-24 Hex Nyloc
Position: 1
1 FENDER, LH RZT
1 FENDER, LH RZT
Position: 1
1 ASSEMBLY, 15” Seat, w/Armrests Ref. Michigan Seat Co.
1 ASSEMBLY, 15” Seat, w/Armrests Ref. Michigan Seat Co.
Position: 1
1 *ENGINE, 18.5 HP B&S Intek, Euro RZT Model 31P7770122B1
1 *ENGINE, 18.5 HP B&S Intek, Euro RZT Model 31P7770122B1
Position: 1
1 *ENGINE, 22 HP Briggs Intek Twin Model 4417770117B1
1 *ENGINE, 22 HP Briggs Intek Twin Model 4417770117B1
Position: 1
1 DECAL, Ignition, RZT
1 DECAL, Ignition, RZT
Position: 1
1 DECAL, SNAPPER FENDER, LH
1 DECAL, SNAPPER FENDER, LH
Position: 1
1 GRIP
1 GRIP
Position: 1
1 WELDMENT, 44” Deck- Simplicity finish: Cardinal Red
1 WELDMENT, 44” Deck- Simplicity finish: Cardinal Red
Position: 1
2 COTTER PIN, 1/2 Self Locking, YZ
2 COTTER PIN, 1/2 Self Locking, YZ
Position: 1
1 WELDMENT, 50” Mower Deck, SNAPPER
1 WELDMENT, 50” Mower Deck, SNAPPER
Position: 1
1 SOLENOID - Super Trombetta - 2 Terminal
1 SOLENOID - Super Trombetta - 2 Terminal
Position: 1
1 WIRING HARNESS, Briggs RZT
1 WIRING HARNESS, Briggs RZT
Position: 1
1 WIRING HARNESS, Briggs 18.5 & 20 HP
1 WIRING HARNESS, Briggs 18.5 & 20 HP
Position: 1
1 RIM, Caster Wheel
1 RIM, Caster Wheel
Position: 2
3 LUBE FITTING, 3/16” Press-In
3 LUBE FITTING, 3/16” Press-In
Position: 2
12 NUT, 5/16-18 Hex Flange Lock, GR
12 NUT, 5/16-18 Hex Flange Lock, GR
Position: 2
2 ROD, Roll Release
2 ROD, Roll Release
Position: 2
1 WELDMENT, LH Control Arm
1 WELDMENT, LH Control Arm
Position: 2
1 ROD, Handle R.H.
1 ROD, Handle R.H.
Position: 2
1 *WELDMENT, LH Control Arm
1 *WELDMENT, LH Control Arm
Position: 2
1 FENDER, RH RZT
1 FENDER, RH RZT
Position: 2
1 SEAT PLATE
1 SEAT PLATE
Position: 2
4 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
4 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
Position: 2
3 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
3 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
Position: 2
1 DECAL, Snapper Fender, LH
1 DECAL, Snapper Fender, LH
Position: 2
1 DECAL, SNAPPER FENDER, RH
1 DECAL, SNAPPER FENDER, RH
Position: 2
1 HANDLE, Deck Lift
1 HANDLE, Deck Lift
Position: 2
3 GROUP, 44” Spindle, ERZT
3 GROUP, 44” Spindle, ERZT
Position: 2
2 ROD, Stabilizer
2 ROD, Stabilizer
Position: 2
3 GROUP, 50” Spindle, RZT
3 GROUP, 50” Spindle, RZT
Position: 2
2 SCREW, 1/4-20 x 1” Hex Head Cap, GR
2 SCREW, 1/4-20 x 1” Hex Head Cap, GR
Position: 2
1 CABLE, Battery Positive
1 CABLE, Battery Positive
Position: 2
1 TIRE, 11 x 4.00-5, Smooth Tread
1 TIRE, 11 x 4.00-5, Smooth Tread
Position: 3
2 WELDMENT, Caster (Cardinal Red)
2 WELDMENT, Caster (Cardinal Red)
Position: 3
1 TANK BRACKET
1 TANK BRACKET
Position: 3
2 WASHER, .28 x .63 x .06 Flat, GR
2 WASHER, .28 x .63 x .06 Flat, GR
Position: 3
1 FOAM GRIP, Handle
1 FOAM GRIP, Handle
Position: 3
1 HOOK, Park Brake
1 HOOK, Park Brake
Position: 3
2 KNOB, Three Prong, 5/16-18 thread
2 KNOB, Three Prong, 5/16-18 thread
Position: 3
1 ASSEMBLY, Engine Pulley
1 ASSEMBLY, Engine Pulley
Position: 3
1 DECAL, Snapper Fender, RH
1 DECAL, Snapper Fender, RH
Position: 3
2 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
2 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
Position: 3
3 *NUT, 3/4-16 Hex Jam, GR
3 *NUT, 3/4-16 Hex Jam, GR
Position: 3
6 NUT, 1/4-20 Hex Flange Lock, GR
6 NUT, 1/4-20 Hex Flange Lock, GR
Position: 3
1 WIRING HARNESS, Hour Meter, RZT
1 WIRING HARNESS, Hour Meter, RZT
Position: 3
2 BALL BEARING, .625 x 1.38
2 BALL BEARING, .625 x 1.38
Position: 4
4 THRUST WASHER, 1” I.D.
4 THRUST WASHER, 1” I.D.
Position: 4
4 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
4 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
Position: 4
2 HAIR PIN, 1-1/8”
2 HAIR PIN, 1-1/8”
Position: 4
2 BUSHING
2 BUSHING
Position: 4
2 *BUSHING
2 *BUSHING
Position: 4
4 BOLT RETAINER, 5/16” Black
4 BOLT RETAINER, 5/16” Black
Position: 4
2 WASHER, 5/16” Split Lock
2 WASHER, 5/16” Split Lock
Position: 4
1 KEY, 1/4 Square x 1”
1 KEY, 1/4 Square x 1”
Position: 4
1 DECAL, SNAPPER
1 DECAL, SNAPPER
Position: 4
1 RETAINING RING, 5/8”, External
1 RETAINING RING, 5/8”, External
Position: 4
6 *WASHER, .77 x 1.5 x .06 Flat case hardened steel
6 *WASHER, .77 x 1.5 x .06 Flat case hardened steel
Position: 4
4 NUT, 7/16-20 Hex, GR 5 or B
4 NUT, 7/16-20 Hex, GR 5 or B
Position: 4
1 12 VOLT DC POWER OUTLET
1 12 VOLT DC POWER OUTLET
Position: 4
2 WIRE, Negative, #8 AWG 14”
2 WIRE, Negative, #8 AWG 14”
Position: 4
1 GREASE FITTING, 1/4-28 thread forming Alemite #3038-B
1 GREASE FITTING, 1/4-28 thread forming Alemite #3038-B
Position: 5
2 RETAINING RING, 1” External
2 RETAINING RING, 1” External
Position: 5
1 FOOTREST, Snapper (Cardinal Red)
1 FOOTREST, Snapper (Cardinal Red)
Position: 5
8 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
8 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
Position: 5
1 WELDMENT, Control Bracket, LH
1 WELDMENT, Control Bracket, LH
Position: 5
4 NUT 1/4-20 Hex Center Lock, GR 5 YZ
4 NUT 1/4-20 Hex Center Lock, GR 5 YZ
Position: 5
1 *WELDMENT, Control Bracket, LH
1 *WELDMENT, Control Bracket, LH
Position: 5
4 NUT, 5/16-18 Hex Large Flange Center Lock
4 NUT, 5/16-18 Hex Large Flange Center Lock
Position: 5
1 BRACKET, Seat Support
1 BRACKET, Seat Support
Position: 5
1 CLUTCH, Ogura JD-11
1 CLUTCH, Ogura JD-11
Position: 5
1 DECAL, Throttle Control, RZT
1 DECAL, Throttle Control, RZT
Position: 5
3 *PULLEY, 4-3/4” O.D.
3 *PULLEY, 4-3/4” O.D.
Position: 5
4 WASHER, 7/16” Split Lock
4 WASHER, 7/16” Split Lock
Position: 5
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 5
1 VALVE STEM, Snap In
1 VALVE STEM, Snap In
Position: 6
1 SCREW, 1/2-13 x 3-1/2” Hex Head Cap, YZ
1 SCREW, 1/2-13 x 3-1/2” Hex Head Cap, YZ
Position: 6
6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 6
2 SHOULDER BOLT, 5/16-18 .530 long shoulder
2 SHOULDER BOLT, 5/16-18 .530 long shoulder
Position: 6
1 WASHER, 5/8 ID x 1.00 OD x .065 Nylon
1 WASHER, 5/8 ID x 1.00 OD x .065 Nylon
Position: 6
1 WASHER, .64 x .99 x .05 Flat, YZ
1 WASHER, .64 x .99 x .05 Flat, YZ
Position: 6
1 *WASHER, 5/8 ID x 1.00 OD x .065 Nylon
1 *WASHER, 5/8 ID x 1.00 OD x .065 Nylon
Position: 6
1 COVER, Front, Snapper
1 COVER, Front, Snapper
Position: 6
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 6
1 WASHER, .468 ID x 1.50 OD x .188 Flat
1 WASHER, .468 ID x 1.50 OD x .188 Flat
Position: 6
1 DECAL, Warning, Operation
1 DECAL, Warning, Operation
Position: 6
1 DECAL, Motion Control, Symbols, ERZT
1 DECAL, Motion Control, Symbols, ERZT
Position: 6
2 COTTER PIN, 3/8”, Self-Locking
2 COTTER PIN, 3/8”, Self-Locking
Position: 6
2 *WASHER, Spindle (Special)
2 *WASHER, Spindle (Special)
Position: 6
4 WASHER, .47 x .92 x .065 Flat
4 WASHER, .47 x .92 x .065 Flat
Position: 6
1 HOUR METER, Inductive
1 HOUR METER, Inductive
Position: 6
2 SCREW, 7/16-14 x 6”, Hex Head Cap, GR
2 SCREW, 7/16-14 x 6”, Hex Head Cap, GR
Position: 7
2 WASHER, 1/2” SAE Flat
2 WASHER, 1/2” SAE Flat
Position: 7
1 PLATE, Rear Seat Guard
1 PLATE, Rear Seat Guard
Position: 7
12 NUT, 5/16-18 Hex Nyloc
12 NUT, 5/16-18 Hex Nyloc
Position: 7
1 WASHER, 5/8” Flat SAE
1 WASHER, 5/8” Flat SAE
Position: 7
1 *WASHER, 5/8” Flat SAE
1 *WASHER, 5/8” Flat SAE
Position: 7
4 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap, YZ
4 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap, YZ
Position: 7
2 WASHER, 3/8” Internal Tooth Lock
2 WASHER, 3/8” Internal Tooth Lock
Position: 7
1 WASHER, 7/16” Split Lock
1 WASHER, 7/16” Split Lock
Position: 7
1 DECAL, Height Of Cut, RZT
1 DECAL, Height Of Cut, RZT
Position: 7
1 DECAL,Deck/Chute International Warning
1 DECAL,Deck/Chute International Warning
Position: 7
1 ROD, Link
1 ROD, Link
Position: 7
2 *RING, 1.85” Internal Retaining
2 *RING, 1.85” Internal Retaining
Position: 7
2 SCREW, 7/16-20 x 4” Hex Head Cap, GR
2 SCREW, 7/16-20 x 4” Hex Head Cap, GR
Position: 7
1 SWITCH, PTO, Yellow
1 SWITCH, PTO, Yellow
Position: 7
2 TUBE, 5/8 O.D. x 14 Ga. Wall x 4.510” long caster wheel spacer
2 TUBE, 5/8 O.D. x 14 Ga. Wall x 4.510” long caster wheel spacer
Position: 8
2 SPACER, Axle Pivot
2 SPACER, Axle Pivot
Position: 8
8 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
8 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 8
1 TRANSAXLE, LH RZT
1 TRANSAXLE, LH RZT
Position: 8
1 WASHER, .64 x 1.12 x .028 Beveled
1 WASHER, .64 x 1.12 x .028 Beveled
Position: 8
1 WELDMENT, Control Bracket, RH
1 WELDMENT, Control Bracket, RH
Position: 8
1 *WASHER, .64 x 1.12 x .028 Beveled
1 *WASHER, .64 x 1.12 x .028 Beveled
Position: 8
1 PANEL, Control
1 PANEL, Control
Position: 8
2 NUT, 3/8-16 Hex Flange Lock
2 NUT, 3/8-16 Hex Flange Lock
Position: 8
1 SCREW, 7/16-20 x 4-1/2” Hex Head Cap, GR
1 SCREW, 7/16-20 x 4-1/2” Hex Head Cap, GR
Position: 8
1 DECAL, Motion Control, RZT
1 DECAL, Motion Control, RZT
Position: 8
1 DECAL, Safety Symbols- RZT
1 DECAL, Safety Symbols- RZT
Position: 8
1 SWIVEL, 3/8” w/thru hole, Special
1 SWIVEL, 3/8” w/thru hole, Special
Position: 8
2 *BEARING, Spindle
2 *BEARING, Spindle
Position: 8
7 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
7 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 8
1 PLUG, Plastic Black
1 PLUG, Plastic Black
Position: 8
2 NUT, 7/16-14 Hex Center Lock, GR 5 or B
2 NUT, 7/16-14 Hex Center Lock, GR 5 or B
Position: 9
2 BEARING SLEEVE
2 BEARING SLEEVE
Position: 9
1 HEAT SHIELD finish: black powder coat
1 HEAT SHIELD finish: black powder coat
Position: 9
1 TRANSAXLE, RH RZT
1 TRANSAXLE, RH RZT
Position: 9
2 NUT, 5/8-18 Hex Jam
2 NUT, 5/8-18 Hex Jam
Position: 9
2 *NUT, 5/8-18 Hex Jam
2 *NUT, 5/8-18 Hex Jam
Position: 9
5 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
5 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
Position: 9
2 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
2 BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
Position: 9
1 HOSE, Oil Drain
1 HOSE, Oil Drain
Position: 9
1 DECAL, Park Brake, RZT
1 DECAL, Park Brake, RZT
Position: 9
1 DECAL, Height of Cut, Symbols, ERZT
1 DECAL, Height of Cut, Symbols, ERZT
Position: 9
1 NUT, 3/8-24 Hex Nyloc
1 NUT, 3/8-24 Hex Nyloc
Position: 9
1 *SHAFT, Blade Spindle (6-11/16 overall length)
1 *SHAFT, Blade Spindle (6-11/16 overall length)
Position: 9
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
Position: 9
1 BAFFLE, Anti-Blowout
1 BAFFLE, Anti-Blowout
Position: 9
1 SWITCH, Seat (NC)
1 SWITCH, Seat (NC)
Position: 9
2 ASS'Y. 18 x 8.50-8 Tire/Wheel, Turf Master, PMS 877 Silver
2 ASS'Y. 18 x 8.50-8 Tire/Wheel, Turf Master, PMS 877 Silver
Position: 10
1 NUT, 1/2-13 Hex Center Lock, GR 5, YZ
1 NUT, 1/2-13 Hex Center Lock, GR 5, YZ
Position: 10
2 BRACKET, Body Support
2 BRACKET, Body Support
Position: 10
1 BRACKET, Anti-Rotation
1 BRACKET, Anti-Rotation
Position: 10
1 SHOULDER BOLT, 3/8-16
1 SHOULDER BOLT, 3/8-16
Position: 10
1 WASHER, 5/8 SAE Flat
1 WASHER, 5/8 SAE Flat
Position: 10
1 *SHOULDER BOLT, 3/8-16
1 *SHOULDER BOLT, 3/8-16
Position: 10
1 U-NUT 1/4-20
1 U-NUT 1/4-20
Position: 10
2 SPRING, Compression- Seat Support
2 SPRING, Compression- Seat Support
Position: 10
1 HARNESS CLIP, 5/8”
1 HARNESS CLIP, 5/8”
Position: 10
1 DECAL, Roll Release, RZT
1 DECAL, Roll Release, RZT
Position: 10
2 DECAL, Warning
2 DECAL, Warning
Position: 10
2 BUSHING, Teflon Impregnated
2 BUSHING, Teflon Impregnated
Position: 10
1 *WELDMENT, Spindle Housing
1 *WELDMENT, Spindle Housing
Position: 10
1 DEFLECTOR, Plastic
1 DEFLECTOR, Plastic
Position: 10
1 DEFLECTOR, Black Plastic
1 DEFLECTOR, Black Plastic
Position: 10
2 SWITCH- DPDT
2 SWITCH- DPDT
Position: 10
1 RIM, 18 x 8.50, 4 Bolt
1 RIM, 18 x 8.50, 4 Bolt
Position: 11
1 BRACKET, Axle (Cardinal Red)
1 BRACKET, Axle (Cardinal Red)
Position: 11
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
Position: 11
1 PIN, Anti-Rotation, RZT Clutch
1 PIN, Anti-Rotation, RZT Clutch
Position: 11
1 THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
1 THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
Position: 11
1 *THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
1 *THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
Position: 11
1 BRACKET, RH Fender Support (Cardinal Red)
1 BRACKET, RH Fender Support (Cardinal Red)
Position: 11
4 NUT, 5/16-18 Hex Nyloc
4 NUT, 5/16-18 Hex Nyloc
Position: 11
1 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR
1 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR
Position: 11
1 DECAL, Chute/Deflector
1 DECAL, Chute/Deflector
Position: 11
1 DECAL, Roll Release, ERZT
1 DECAL, Roll Release, ERZT
Position: 11
1 WELDMENT, Handle Lift yellow zinc plated
1 WELDMENT, Handle Lift yellow zinc plated
Position: 11
1 *LUBE FITTING, 3/16” Press-In
1 *LUBE FITTING, 3/16” Press-In
Position: 11
7 NUT, 5/16-18 Hex Flange Lock, GR
7 NUT, 5/16-18 Hex Flange Lock, GR
Position: 11
1 BATTERY BRACKET
1 BATTERY BRACKET
Position: 11
1 TIRE, 18 x 8.50-8, Turf Master
1 TIRE, 18 x 8.50-8, Turf Master
Position: 12
6 BOLT, 5/16-18 x 7/8” Hex Flange Lock
6 BOLT, 5/16-18 x 7/8” Hex Flange Lock
Position: 12
2 BRACE, Hood/Fender
2 BRACE, Hood/Fender
Position: 12
1 NUT, 5/16-18 Hex Flange Lock, GR
1 NUT, 5/16-18 Hex Flange Lock, GR
Position: 12
2 FLANGE BEARING, 9/16 I.D. P.M.
2 FLANGE BEARING, 9/16 I.D. P.M.
Position: 12
2 *FLANGE BEARING, 9/16 I.D. P.M.
2 *FLANGE BEARING, 9/16 I.D. P.M.
Position: 12
2 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
2 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 12
1 ROD, Seat Hinge
1 ROD, Seat Hinge
Position: 12
1 CABLE, 26.25” Throttle Control
1 CABLE, 26.25” Throttle Control
Position: 12
1 CABLE, 48” Throttle Control B&S 16HP Single Intek
1 CABLE, 48” Throttle Control B&S 16HP Single Intek
Position: 12
2 DECAL, Danger, (Cut Finger)
2 DECAL, Danger, (Cut Finger)
Position: 12
1 DECAL, 250 Z 18.5HP RZT
1 DECAL, 250 Z 18.5HP RZT
Position: 12
3 NUT, 3/8-16 Hex Flange Lock
3 NUT, 3/8-16 Hex Flange Lock
Position: 12
1 *BLADE, 16-1/8”, No Air-Lift, ERZT
1 *BLADE, 16-1/8”, No Air-Lift, ERZT
Position: 12
1 BAFFLE, Blowout, LH, 44” Mower
1 BAFFLE, Blowout, LH, 44” Mower
Position: 12
1 *BLADE, 18-1/8” Simplicity p/n
1 *BLADE, 18-1/8” Simplicity p/n
Position: 12
1 SPRING, Idler, 44/50” Deck Ref.
1 SPRING, Idler, 44/50” Deck Ref.
Position: 12
1 BATTERY HOLD DOWN
1 BATTERY HOLD DOWN
Position: 12
8 LUG NUT 1/2-20 Tapered Seat YZ
8 LUG NUT 1/2-20 Tapered Seat YZ
Position: 13
6 NUT, 5/16-18 Hex Flange Lock, GR
6 NUT, 5/16-18 Hex Flange Lock, GR
Position: 13
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position: 13
2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
Position: 13
2 NUT, 3/8-16 Hex Nyloc
2 NUT, 3/8-16 Hex Nyloc
Position: 13
6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 13
4 *NUT, 3/8-16 Hex Nyloc
4 *NUT, 3/8-16 Hex Nyloc
Position: 13
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position: 13
1 COTTER PIN, 3/8” Self-Locking
1 COTTER PIN, 3/8” Self-Locking
Position: 13
1 KNOB, Throttle, Red RZT
1 KNOB, Throttle, Red RZT
Position: 13
1 DECAL, 250 Z 22HP RZT
1 DECAL, 250 Z 22HP RZT
Position: 13
1 DECAL, 2006 Year of Mfg.
1 DECAL, 2006 Year of Mfg.
Position: 13
2 *WASHER, Beveled
2 *WASHER, Beveled
Position: 13
1 BAFFLE, Blowout, 44” Mower
1 BAFFLE, Blowout, 44” Mower
Position: 13
1 SWITCH, Ignition-Afterfire Solenoid includes set of keys
1 SWITCH, Ignition-Afterfire Solenoid includes set of keys
Position: 13
8 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
8 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 14
4 SCREW, 5/16-18 x 3” Hex Head Cap, GR 5, YZ
4 SCREW, 5/16-18 x 3” Hex Head Cap, GR 5, YZ
Position: 14
1 SHOULDER BOLT, 5/16 x 1/4-20
1 SHOULDER BOLT, 5/16 x 1/4-20
Position: 14
1 *SHOULDER BOLT, 5/16 x 1/4-20
1 *SHOULDER BOLT, 5/16 x 1/4-20
Position: 14
1 COVER, Engine, Double Vent
1 COVER, Engine, Double Vent
Position: 14
2 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
2 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
Position: 14
1 SCREW, #10-16 x 3/4” Pan Head Self-Tap
1 SCREW, #10-16 x 3/4” Pan Head Self-Tap
Position: 14
1 DECAL-50”-Silver on black w/stripe
1 DECAL-50”-Silver on black w/stripe
Position: 14
1 DECAL, Park Brake, ERZT
1 DECAL, Park Brake, ERZT
Position: 14
2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5 or
2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5 or
Position: 14
1 *NUT, 5/8-18 Hex Jam
1 *NUT, 5/8-18 Hex Jam
Position: 14
2 RETAINER, 1/4” Bolt
2 RETAINER, 1/4” Bolt
Position: 14
1 MACHINERY BUSHING
1 MACHINERY BUSHING
Position: 14
20 NUT, 5/16-18 Hex Top Lock, GR B
20 NUT, 5/16-18 Hex Top Lock, GR B
Position: 15
1 SPRING, Torsion, RH Wind
1 SPRING, Torsion, RH Wind
Position: 15
8 SHIM WASHER, 5/16” I.D.
8 SHIM WASHER, 5/16” I.D.
Position: 15
1 DAMPENER, Hydraulic
1 DAMPENER, Hydraulic
Position: 15
1 TRACK, Control Stick, L.H.
1 TRACK, Control Stick, L.H.
Position: 15
1 SPRING, Extention, RTN, ERZT
1 SPRING, Extention, RTN, ERZT
Position: 15
1 *DAMPENER, Hydraulic not used on ERZT (European)
1 *DAMPENER, Hydraulic not used on ERZT (European)
Position: 15
2 WASHER, 1/4” Internal/External Tooth Lock
2 WASHER, 1/4” Internal/External Tooth Lock
Position: 15
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR
Position: 15
2 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
2 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
Position: 15
1 DECAL, OPEI Walk/Ride not shown, not a service part
1 DECAL, OPEI Walk/Ride not shown, not a service part
Position: 15
1 DECAL-44”-Silver on Black w/stripe
1 DECAL-44”-Silver on Black w/stripe
Position: 15
1 WELDMENT, Handle Support
1 WELDMENT, Handle Support
Position: 15
18 NUT, 5/16-18 Hex Flange Lock, GR
18 NUT, 5/16-18 Hex Flange Lock, GR
Position: 15
1 SPACER, .380 ID x .750 OD x .895
1 SPACER, .380 ID x .750 OD x .895
Position: 15
17 NUT, 5/16-18 Hex Flange Lock, GR
17 NUT, 5/16-18 Hex Flange Lock, GR
Position: 15
1 BEZEL
1 BEZEL
Position: 15
2 PLATE, Friction
2 PLATE, Friction
Position: 16
1 WELDMENT, Hydro Idler
1 WELDMENT, Hydro Idler
Position: 16
4 SCREW 5/16-18 x 2-3/4” Hex Head Cap, GR 5, YZ
4 SCREW 5/16-18 x 2-3/4” Hex Head Cap, GR 5, YZ
Position: 16
1 SPACER, 9/16 OD x 12GA x .325
1 SPACER, 9/16 OD x 12GA x .325
Position: 16
1 WELDMENT, Lift Bracket
1 WELDMENT, Lift Bracket
Position: 16
3 SPACER, 9/16” OD x 12GA x .325
3 SPACER, 9/16” OD x 12GA x .325
Position: 16
1 *SPACER, 9/16 OD x 12GA x .325
1 *SPACER, 9/16 OD x 12GA x .325
Position: 16
2 KNOB (1/4-20 thread)
2 KNOB (1/4-20 thread)
Position: 16
2 WASHER, 5/16” Split Lock
2 WASHER, 5/16” Split Lock
Position: 16
1 CABLE, 30” Choke Control
1 CABLE, 30” Choke Control
Position: 16
1 CABLE, 54” Choke Control
1 CABLE, 54” Choke Control
Position: 16
1 DECAL, Euro Community (CE)
1 DECAL, Euro Community (CE)
Position: 16
17 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
17 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 16
1 COVER, Spindle, LH, Red, RZT 44/50”
1 COVER, Spindle, LH, Red, RZT 44/50”
Position: 16
16 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
16 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 16
4 WASHER, .28 x .63 x .06 Flat, GR
4 WASHER, .28 x .63 x .06 Flat, GR
Position: 16
8 SCREW, 5/16-18 x 1” Flat Head Countersunk
8 SCREW, 5/16-18 x 1” Flat Head Countersunk
Position: 17
1 SPACER, Hydro Idler
1 SPACER, Hydro Idler
Position: 17
2 BRACKET, Transaxle Support
2 BRACKET, Transaxle Support
Position: 17
2 WASHER, 1/4” I.D. Flat
2 WASHER, 1/4” I.D. Flat
Position: 17
2 *WASHER, 1/4” I.D. Flat
2 *WASHER, 1/4” I.D. Flat
Position: 17
1 GUARD, Rear Seat
1 GUARD, Rear Seat
Position: 17
2 WASHER, .34 x 1.0 x .09 Flat
2 WASHER, .34 x 1.0 x .09 Flat
Position: 17
1 WASHER, 3/8” Internal Tooth Lock
1 WASHER, 3/8” Internal Tooth Lock
Position: 17
1 DECAL, Sound
1 DECAL, Sound
Position: 17
1 ROD, Timing (1/2-13 thread)
1 ROD, Timing (1/2-13 thread)
Position: 17
1 BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, GR
1 BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, GR
Position: 17
1 COVER, Spindle, RH, Red, RZT 44/50”
1 COVER, Spindle, RH, Red, RZT 44/50”
Position: 17
2 NUT, 1/4-20 Hex Center Lock, GR 5 or B
2 NUT, 1/4-20 Hex Center Lock, GR 5 or B
Position: 17
2 BRACKET, Axle Support
2 BRACKET, Axle Support
Position: 18
1 WASHER, .531 x 1.062 x .121 Flat, YZ
1 WASHER, .531 x 1.062 x .121 Flat, YZ
Position: 18
1 V-BELT, HA Sect. (wrapped) 58.00 effective length hydro drive
1 V-BELT, HA Sect. (wrapped) 58.00 effective length hydro drive
Position: 18
2 NUT, 1/4-20 Hex Nyloc
2 NUT, 1/4-20 Hex Nyloc
Position: 18
6 NUT, 1/4-20 Hex Nyloc YZ
6 NUT, 1/4-20 Hex Nyloc YZ
Position: 18
2 SCREW, 1/4-15 x 1-1/4” Hex Washer Self-Tap
2 SCREW, 1/4-15 x 1-1/4” Hex Washer Self-Tap
Position: 18
2 SPACER, .340 I.D. x .63 O.D. x .310 Thick
2 SPACER, .340 I.D. x .63 O.D. x .310 Thick
Position: 18
1 NUT, 3/8-24 Hex, GR B
1 NUT, 3/8-24 Hex, GR B
Position: 18
2 NUT, 1/2-13 Hex Flange Lock, GR 5, YZ
2 NUT, 1/2-13 Hex Flange Lock, GR 5, YZ
Position: 18
2 PLUG, Hole (Polyethylene)
2 PLUG, Hole (Polyethylene)
Position: 18
5 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
5 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
Position: 18
13 PLUG, Hole (Polyethylene)
13 PLUG, Hole (Polyethylene)
Position: 18
2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR
2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR
Position: 18
8 WASHER, .34 x .69 x .08 Flat
8 WASHER, .34 x .69 x .08 Flat
Position: 19
1 SCREW 1/2-13 x 2-1/2” Hex Head Cap, GR 5 (Black Phosphate)
1 SCREW 1/2-13 x 2-1/2” Hex Head Cap, GR 5 (Black Phosphate)
Position: 19
1 SHOULDER BOLT, 5/16 x 1/4-20
1 SHOULDER BOLT, 5/16 x 1/4-20
Position: 19
1 BRACKET, Switch
1 BRACKET, Switch
Position: 19
1 *SHOULDER BOLT, 5/16 x 1/4-20
1 *SHOULDER BOLT, 5/16 x 1/4-20
Position: 19
2 WASHER, .28 x .63 x .06 Flat, GR
2 WASHER, .28 x .63 x .06 Flat, GR
Position: 19
1 BRACKET, Lower Seat
1 BRACKET, Lower Seat
Position: 19
3 CABLE TIE, 7”
3 CABLE TIE, 7”
Position: 19
1 COTTER PIN, 5/32 x 1”, YZ
1 COTTER PIN, 5/32 x 1”, YZ
Position: 19
1 NUT, 3/8-16 Hex Flange Lock
1 NUT, 3/8-16 Hex Flange Lock
Position: 19
2 NUT, 1/4-20 Hex
2 NUT, 1/4-20 Hex
Position: 19
1 BATTERY, 12 Volt, 230 CCA
1 BATTERY, 12 Volt, 230 CCA
Position: 19
4 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
4 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
Position: 20
1 IDLER, 3.25” OD x .391 ID x 1.63 Backside
1 IDLER, 3.25” OD x .391 ID x 1.63 Backside
Position: 20
2 SCREW, 7/16-20 x 2-1/2” Hex Head Cap, GR 5 (Special Head)
2 SCREW, 7/16-20 x 2-1/2” Hex Head Cap, GR 5 (Special Head)
Position: 20
1 SPACER, 9/16 OD x 12GA x .899
1 SPACER, 9/16 OD x 12GA x .899
Position: 20
1 SWITCH- DPDT also shown in Electrical Group
1 SWITCH- DPDT also shown in Electrical Group
Position: 20
1 NUT, 3/8-24 Hex Jam
1 NUT, 3/8-24 Hex Jam
Position: 20
1 *SPACER, 9/16 OD x 12GA x .899 not used on ERZT (European)
1 *SPACER, 9/16 OD x 12GA x .899 not used on ERZT (European)
Position: 20
2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
Position: 20
1 MANIFOLD, 18 HP B&S Intek
1 MANIFOLD, 18 HP B&S Intek
Position: 20
1 MANIFOLD, B&S V-Twin Intek
1 MANIFOLD, B&S V-Twin Intek
Position: 20
1 GROOVE PIN, 1/4 x 1-1/4”
1 GROOVE PIN, 1/4 x 1-1/4”
Position: 20
7 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
7 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
Position: 20
2 LOCKWASHER, 1/4” Spring
2 LOCKWASHER, 1/4” Spring
Position: 20
5 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
5 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
Position: 20
1 COVER, Battery Cable used on ERZT185440BVE
1 COVER, Battery Cable used on ERZT185440BVE
Position: 20
1 WASHER, 3/8” Flat SAE
1 WASHER, 3/8” Flat SAE
Position: 21
2 NUT, 7/16-20 Hex Center Lock Jam, GR 5 or B
2 NUT, 7/16-20 Hex Center Lock Jam, GR 5 or B
Position: 21
2 SCREW, 1/4-20 x1-1/4” Hex Head Cap, GR
2 SCREW, 1/4-20 x1-1/4” Hex Head Cap, GR
Position: 21
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
Position: 21
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
2 SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
Position: 21
1 MUFFLER, RZT
1 MUFFLER, RZT
Position: 21
1 CLEVIS PIN, 1/2 x 1-1/8 YZ
1 CLEVIS PIN, 1/2 x 1-1/8 YZ
Position: 21
1 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
1 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
Position: 21
1 WASHER, Large, 1/4 ID x 5/8 OD x .134/.109
1 WASHER, Large, 1/4 ID x 5/8 OD x .134/.109
Position: 21
1 WASHER, .33 x .88 x .09 Flat
1 WASHER, .33 x .88 x .09 Flat
Position: 21
2 WASHER, Large 1/4 ID x 5/8 OD x .134/.109
2 WASHER, Large 1/4 ID x 5/8 OD x .134/.109
Position: 21
1 WASHER, 1/4” Internal Tooth Lock, YZ
1 WASHER, 1/4” Internal Tooth Lock, YZ
Position: 21
1 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
1 NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
Position: 22
1 SPRING, Extention, .562 OD x 4.250 long x .049 Wire B
1 SPRING, Extention, .562 OD x 4.250 long x .049 Wire B
Position: 22
2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
2 NUT 1/4-20 Hex Center Lock, GR 5 YZ
Position: 22
1 SWITCH- DPDT also shown in Electrical Group
1 SWITCH- DPDT also shown in Electrical Group
Position: 22
1 GASKET, Exhaust
1 GASKET, Exhaust
Position: 22
2 GASKET, Exhaust, 20 HP Intek
2 GASKET, Exhaust, 20 HP Intek
Position: 22
1 WELDMENT, Link Lift
1 WELDMENT, Link Lift
Position: 22
1 IDLER PULLEY BRACKET, 44/50”
1 IDLER PULLEY BRACKET, 44/50”
Position: 22
1 BOLT, 1/4-20 x 7/8” Round Head Short Square Neck, GR
1 BOLT, 1/4-20 x 7/8” Round Head Short Square Neck, GR
Position: 22
1 SPACER, .65 x .88 x .10 (not shown) used on RZT22500BVE2
1 SPACER, .65 x .88 x .10 (not shown) used on RZT22500BVE2
Position: 22
1 MAT, Foot Rest RZT
1 MAT, Foot Rest RZT
Position: 23
8 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
8 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 23
2 FLANGE BEARING, 9/16 I.D. P.M. powdered metal
2 FLANGE BEARING, 9/16 I.D. P.M. powdered metal
Position: 23
6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
6 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 23
1 NUT, 5/16-18 Hex Nyloc
1 NUT, 5/16-18 Hex Nyloc
Position: 23
3 WASHER, 5/16” Split Lock
3 WASHER, 5/16” Split Lock
Position: 23
5 WASHER, 5/16” Split Lock
5 WASHER, 5/16” Split Lock
Position: 23
2 WASHER, .531 x 1.062 x .121 Flat, YZ
2 WASHER, .531 x 1.062 x .121 Flat, YZ
Position: 23
1 BOLT, 3/8-16 x 2-3/4” Round Head Square Neck, GR
1 BOLT, 3/8-16 x 2-3/4” Round Head Square Neck, GR
Position: 23
1 ROD, Deflector Simplicity p/n
1 ROD, Deflector Simplicity p/n
Position: 23
2 BOLT, 1/4-20 x 7/8” Round Head Short Square Neck Carriage,
2 BOLT, 1/4-20 x 7/8” Round Head Short Square Neck Carriage,
Position: 23
1 WIRE, Negative, 14” (not shown)
1 WIRE, Negative, 14” (not shown)
Position: 23
1 MAT, Floor Pan
1 MAT, Floor Pan
Position: 24
1 PLATE, Fwd/Rev Adjust
1 PLATE, Fwd/Rev Adjust
Position: 24
1 BRACKET, Park Brake, LH Lower
1 BRACKET, Park Brake, LH Lower
Position: 24
2 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
2 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
Position: 24
4 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
4 SET SCREW, 5/16-18 x 3/4” Socket Head, GR
Position: 24
2 BRACKET, Rear Support, RH
2 BRACKET, Rear Support, RH
Position: 24
2 BOLT, 3/8-16 x 2-1/4” Round Head Short Square Neck, GR
2 BOLT, 3/8-16 x 2-1/4” Round Head Short Square Neck, GR
Position: 24
1 SPRING, Torsion
1 SPRING, Torsion
Position: 24
1 ROD, Pivot, Side Discharge, 50” Deck
1 ROD, Pivot, Side Discharge, 50” Deck
Position: 24
1 CABLE, Battery Negative, RZT (not shown) used on RZT22500BVE2
1 CABLE, Battery Negative, RZT (not shown) used on RZT22500BVE2
Position: 24
1 TRACK, Control Stick R.H.
1 TRACK, Control Stick R.H.
Position: 25
1 SHOULDER BOLT, 3/8-16 2.013 long shoulder
1 SHOULDER BOLT, 3/8-16 2.013 long shoulder
Position: 25
1 BRACKET, Park Brake, RH Lower
1 BRACKET, Park Brake, RH Lower
Position: 25
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 25
5 SCREW, 1/4-20 x 3/4” Hex Head Flange, GR 5, YZ
5 SCREW, 1/4-20 x 3/4” Hex Head Flange, GR 5, YZ
Position: 25
8 NUT, 5/16-18 Hex Flange Lock, GR
8 NUT, 5/16-18 Hex Flange Lock, GR
Position: 25
1 PAD, Rubber Adhesive
1 PAD, Rubber Adhesive
Position: 25
1 CAP, Spring End
1 CAP, Spring End
Position: 25
1 HARNESS, RZT (not shown)
1 HARNESS, RZT (not shown)
Position: 25
1 CONTROL BRACKET, LH
1 CONTROL BRACKET, LH
Position: 26
1 SHOULDER BOLT, 5/16 x 1/4-20 .800 long shoulder
1 SHOULDER BOLT, 5/16 x 1/4-20 .800 long shoulder
Position: 26
1 WASHER, 1/2 x .090 Flat
1 WASHER, 1/2 x .090 Flat
Position: 26
1 BRACKET, Muffler 18HP Briggs
1 BRACKET, Muffler 18HP Briggs
Position: 26
1 BRACKET, Muffler 20/22HP Briggs
1 BRACKET, Muffler 20/22HP Briggs
Position: 26
2 BEARING, Powdered Metal
2 BEARING, Powdered Metal
Position: 26
1 WASHER, .34 ID x .75 OD Flat
1 WASHER, .34 ID x .75 OD Flat
Position: 26
1 CABLE, Battery Positive RZT (not shown)
1 CABLE, Battery Positive RZT (not shown)
Position: 26
4 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
4 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 27
1 SHOULDER BOLT, 5/16 x 1/4-20 1.360 long shoulder
1 SHOULDER BOLT, 5/16 x 1/4-20 1.360 long shoulder
Position: 27
1 WASHER, .531 x 1.0 x .063 Flat
1 WASHER, .531 x 1.0 x .063 Flat
Position: 27
1 SCREW, 1/4-20 x 1” Hex Head Cap, GR
1 SCREW, 1/4-20 x 1” Hex Head Cap, GR
Position: 27
4 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
4 BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
Position: 27
1 CLAMP Simplicity p/n
1 CLAMP Simplicity p/n
Position: 27
1 WIRING HARNESS, Hour Meter, RZT (not shown)
1 WIRING HARNESS, Hour Meter, RZT (not shown)
Position: 27
4 NUT, 3/8-16 Hex Flange Lock
4 NUT, 3/8-16 Hex Flange Lock
Position: 28
1 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
1 SHOULDER BOLT, 5/16-18 x 1” .220 long shoulder
Position: 28
4 WASHER, .28 x .63 x .06 Flat, GR
4 WASHER, .28 x .63 x .06 Flat, GR
Position: 28
4 ADJUSTER, Chain
4 ADJUSTER, Chain
Position: 28
3 NUT, 3/8-16 Hex Nyloc
3 NUT, 3/8-16 Hex Nyloc
Position: 28
1 CLAMP
1 CLAMP
Position: 28
1 BRACKET, Rod Holder, RZT
1 BRACKET, Rod Holder, RZT
Position: 29
2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
Position: 29
1 WASHER, 1/4” Split Lock
1 WASHER, 1/4” Split Lock
Position: 29
4 SWIVEL, Shift Linkage, PM
4 SWIVEL, Shift Linkage, PM
Position: 29
6 WASHER, 3/8” Flat SAE
6 WASHER, 3/8” Flat SAE
Position: 29
2 POP RIVET, 1/8 x 3/8”
2 POP RIVET, 1/8 x 3/8”
Position: 30
2 WASHER, 1/4” I.D. Flat case hardened steel
2 WASHER, 1/4” I.D. Flat case hardened steel
Position: 30
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position: 30
1 NUT, 1/4-20 Hex, GR 5 or B
1 NUT, 1/4-20 Hex, GR 5 or B
Position: 30
4 WASHER, .390 I. D. Flat
4 WASHER, .390 I. D. Flat
Position: 30
2 PULLEY, Flat Idler, 3-1/4” Dia.
2 PULLEY, Flat Idler, 3-1/4” Dia.
Position: 30
7 WASHER, 3/8” Flat SAE
7 WASHER, 3/8” Flat SAE
Position: 30
1 ROD END
1 ROD END
Position: 31
1 *ROD END
1 *ROD END
Position: 31
1 CLAMP, Muffler Briggs p/n
1 CLAMP, Muffler Briggs p/n
Position: 31
1 CLAMP, Muffler Briggs p/n
1 CLAMP, Muffler Briggs p/n
Position: 31
8 NUT, 5/16-18 Hex, GR 5 or B
8 NUT, 5/16-18 Hex, GR 5 or B
Position: 31
3 WASHER, .468 x 1.625 x .25 Flat case hardened steel
3 WASHER, .468 x 1.625 x .25 Flat case hardened steel
Position: 31
1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
1 SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
Position: 32
1 *SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
1 *SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR
Position: 32
1 ASSEMBLY, Fuel Tank, RZT includes items 33 thru
1 ASSEMBLY, Fuel Tank, RZT includes items 33 thru
Position: 32
1 ASSEMBLY, Fuel Tank, RZT includes items 33 thru
1 ASSEMBLY, Fuel Tank, RZT includes items 33 thru
Position: 32
4 HAIR PIN, 3/32 x 1-1/2”
4 HAIR PIN, 3/32 x 1-1/2”
Position: 32
2 WASHER, .406 x 1.50 x .120 Flat
2 WASHER, .406 x 1.50 x .120 Flat
Position: 32
4 WASHER, .406 x 1.50 x .120 Flat
4 WASHER, .406 x 1.50 x .120 Flat
Position: 32
2 NUT, 3/8-24 Hex, GR B, YZ
2 NUT, 3/8-24 Hex, GR B, YZ
Position: 33
3 *NUT, 3/8-24 Hex, GR B, YZ
3 *NUT, 3/8-24 Hex, GR B, YZ
Position: 33
1 FUEL TANK
1 FUEL TANK
Position: 33
1 WELDMENT, Lift Rear yellow zinc plated
1 WELDMENT, Lift Rear yellow zinc plated
Position: 33
1 PULLEY, 4” Flat Idler
1 PULLEY, 4” Flat Idler
Position: 33
2 PULLEY, Flat Idler 5.0 x .375 belt clutch
2 PULLEY, Flat Idler 5.0 x .375 belt clutch
Position: 33
3 WASHER, 3/8” Flat
3 WASHER, 3/8” Flat
Position: 34
3 *WASHER, 3/8” Flat
3 *WASHER, 3/8” Flat
Position: 34
1 DIP TUBE
1 DIP TUBE
Position: 34
1 FOOT PEDAL, Rubber
1 FOOT PEDAL, Rubber
Position: 34
1 NUT, 3/8-16 Hex Center Lock, GR 5 or B
1 NUT, 3/8-16 Hex Center Lock, GR 5 or B
Position: 34
1 NUT, 3/8-16 Hex Center lock
1 NUT, 3/8-16 Hex Center lock
Position: 34
1 SPRING, Compression (Brake)
1 SPRING, Compression (Brake)
Position: 35
1 *SPRING, Compression (Brake)
1 *SPRING, Compression (Brake)
Position: 35
1 GROMMET
1 GROMMET
Position: 35
2 BEARING, 3/4” I.D. powdered metal
2 BEARING, 3/4” I.D. powdered metal
Position: 35
1 WASHER, .468 x 1.625 x .25 Flat
1 WASHER, .468 x 1.625 x .25 Flat
Position: 35
1 ROD, Link Fwd./Rev. (3/8-24 thread)
1 ROD, Link Fwd./Rev. (3/8-24 thread)
Position: 36
1 *ROD, Link Fwd./Rev. (3/8-24 thread)
1 *ROD, Link Fwd./Rev. (3/8-24 thread)
Position: 36
1 ELBOW, 90 Degree
1 ELBOW, 90 Degree
Position: 36
1 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
1 SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 36
1 WELDMENT, Idler Swing Arm
1 WELDMENT, Idler Swing Arm
Position: 36
1 CLEVIS PIN, 7/16 x 1”
1 CLEVIS PIN, 7/16 x 1”
Position: 37
1 *CLEVIS PIN, 7/16 x 1”
1 *CLEVIS PIN, 7/16 x 1”
Position: 37
1 CAP, Fuel, 3-1/2”
1 CAP, Fuel, 3-1/2”
Position: 37
1 BRACKET, Foot Assist yellow zinc plated
1 BRACKET, Foot Assist yellow zinc plated
Position: 37
1 IDLER SPACER, .75 x .390 x 1.800
1 IDLER SPACER, .75 x .390 x 1.800
Position: 37
1 COTTER PIN, 1/2 Self Locking, YZ
1 COTTER PIN, 1/2 Self Locking, YZ
Position: 38
3 COTTER PIN, 1/2 Self Locking, YZ
3 COTTER PIN, 1/2 Self Locking, YZ
Position: 38
4 CLAMP, Fuel Line
4 CLAMP, Fuel Line
Position: 38
1 SWIVEL, Timing Rod yellow zinc plated
1 SWIVEL, Timing Rod yellow zinc plated
Position: 38
1 BOLT, 3/8-16 x 2-1/4” Round Head Short Square Neck, GR
1 BOLT, 3/8-16 x 2-1/4” Round Head Short Square Neck, GR
Position: 38
1 SPACER, Idler (.75 x .390 x 1.800)
1 SPACER, Idler (.75 x .390 x 1.800)
Position: 38
1 CLIP, Spring
1 CLIP, Spring
Position: 39
1 COTTER PIN, 3/8” Self-Locking
1 COTTER PIN, 3/8” Self-Locking
Position: 39
2 HOSE, Fuel, 5”
2 HOSE, Fuel, 5”
Position: 39
2 HOSE, Fuel, .25 I.D. x 14” long
2 HOSE, Fuel, .25 I.D. x 14” long
Position: 39
1 WELDMENT, Bellcrank, RH yellow zinc plated
1 WELDMENT, Bellcrank, RH yellow zinc plated
Position: 39
1 BELT, 44” Deck, B Section 138.25” Effective Length
1 BELT, 44” Deck, B Section 138.25” Effective Length
Position: 39
1 BOLT, 3/8-16 x 2-1/4” Short Square Neck Carriage, GR
1 BOLT, 3/8-16 x 2-1/4” Short Square Neck Carriage, GR
Position: 39
2 WASHER, .28 x .63 x .06 Flat, GR
2 WASHER, .28 x .63 x .06 Flat, GR
Position: 40
1 VALVE, Fuel Shut-Off
1 VALVE, Fuel Shut-Off
Position: 40
1 VALVE, Fuel
1 VALVE, Fuel
Position: 40
1 KEY, 3/16” Square x 1-1/2”
1 KEY, 3/16” Square x 1-1/2”
Position: 40
4 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
4 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
Position: 40
1 BELT, B Section, 150” Effective Length
1 BELT, B Section, 150” Effective Length
Position: 40
1 BRACKET, Fender Support, RH
1 BRACKET, Fender Support, RH
Position: 41
1 ROD, Park Brake (1/4-20 thread)
1 ROD, Park Brake (1/4-20 thread)
Position: 41
1 SEAL, Tank
1 SEAL, Tank
Position: 41
2 BUSHING, Idler powdered metal
2 BUSHING, Idler powdered metal
Position: 41
4 WHEEL 4 x 1-1/2” Offset
4 WHEEL 4 x 1-1/2” Offset
Position: 41
4 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
4 SHOULDER BOLT, 3/8-24 x 5/8” YZ 1.530” long shoulder
Position: 41
1 SPRING, Compression
1 SPRING, Compression
Position: 42
1 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
1 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
Position: 42
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR
Position: 42
4 NUT, 3/8-24 Hex Center Lock
4 NUT, 3/8-24 Hex Center Lock
Position: 42
1 BRACKET, Park Brake
1 BRACKET, Park Brake
Position: 43
2 WASHER, .34 x .69 x .08 Flat
2 WASHER, .34 x .69 x .08 Flat
Position: 43
2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR
Position: 43
1 NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
1 NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
Position: 43
1 NUT, 1/4-20 Hex Top Lock, GR B
1 NUT, 1/4-20 Hex Top Lock, GR B
Position: 44
1 NUT, 5/16-18 Hex, GR 5 or B
1 NUT, 5/16-18 Hex, GR 5 or B
Position: 44
1 SUPPORT, Front Deck, RH
1 SUPPORT, Front Deck, RH
Position: 44
2 WASHER, 3/8” Flat
2 WASHER, 3/8” Flat
Position: 44
1 ROD, Hanger (1/4-20 both ends)
1 ROD, Hanger (1/4-20 both ends)
Position: 45
3 SPEED NUT, 1/4-20 U Type/070/.140 Black
3 SPEED NUT, 1/4-20 U Type/070/.140 Black
Position: 45
1 TUBE, Manifold Extension
1 TUBE, Manifold Extension
Position: 45
1 SUPPORT, Front Deck, LH
1 SUPPORT, Front Deck, LH
Position: 45
1 SPRING, Idler Primary
1 SPRING, Idler Primary
Position: 45
2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR
2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR
Position: 46
1 HEAT SHIELD, Muffler, ERZT, MY06
1 HEAT SHIELD, Muffler, ERZT, MY06
Position: 46
1 Bracket, Fuel Pump Briggs part
1 Bracket, Fuel Pump Briggs part
Position: 46
2 SET SCREW, 5-16-18 X 1/2” Square Head w/locking patch
2 SET SCREW, 5-16-18 X 1/2” Square Head w/locking patch
Position: 46
1 SPACER, .340 I.D. x .63 O.D. x .310 Thick
1 SPACER, .340 I.D. x .63 O.D. x .310 Thick
Position: 46
1 ROD, Park Brake
1 ROD, Park Brake
Position: 47
2 SCREW, #8-32 x 1/2” Cross Recess Pan Head
2 SCREW, #8-32 x 1/2” Cross Recess Pan Head
Position: 47
1 BOLT, 5/16-18 x 1-1/4” Square Neck Carriage, GR
1 BOLT, 5/16-18 x 1-1/4” Square Neck Carriage, GR
Position: 47
1 WELDMENT, Front Lift yellow zinc plated
1 WELDMENT, Front Lift yellow zinc plated
Position: 47
2 WASHER, 3/8” Flat SAE
2 WASHER, 3/8” Flat SAE
Position: 48
3 SCREW, 1/4-20 x 5/8” Hex Flange Lock w/locking patch
3 SCREW, 1/4-20 x 5/8” Hex Flange Lock w/locking patch
Position: 48
3 NUT, 5/16-18 Hex Flange Lock
3 NUT, 5/16-18 Hex Flange Lock
Position: 48
6 *SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
6 *SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
Position: 49
3 BUSHING, .250 ID x .375 OD x .25 Long steel sleeve
3 BUSHING, .250 ID x .375 OD x .25 Long steel sleeve
Position: 49
1 *PLATE, Fwd/Rev Adjust
1 *PLATE, Fwd/Rev Adjust
Position: 50
3 RETAINER, 1/4” Bolt
3 RETAINER, 1/4” Bolt
Position: 50
1 *TRACK, Control Stick R.H.
1 *TRACK, Control Stick R.H.
Position: 51
1 PUSH NUT for .156 dia. Stud
1 PUSH NUT for .156 dia. Stud
Position: 51
1 *CONTROL BRACKET, LH
1 *CONTROL BRACKET, LH
Position: 52
1 BOLT, 5/16-18 x 1-1/4” Square Neck Carriage
1 BOLT, 5/16-18 x 1-1/4” Square Neck Carriage
Position: 52
4 *SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
4 *SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
Position: 53
4 *NUT, 3/8-16 Hex Flange Lock
4 *NUT, 3/8-16 Hex Flange Lock
Position: 54
1 *BRACKET, Rod Holder, RZT
1 *BRACKET, Rod Holder, RZT
Position: 55
2 *POP RIVET, 1/8 x 3/8”
2 *POP RIVET, 1/8 x 3/8”
Position: 56
1 *CLIP, Spring
1 *CLIP, Spring
Position: 57