Exploded view 112 SNAPPER snelt20-112
Discover the complete exploded view 112 SNAPPER snelt20-112, an essential guide to easily identify all spare parts of your appliance. Whether you are looking for a specific part or need help with the repair, our detailed presentation helps you understand each component of your 112. Quickly find the parts you need to extend the life of your 112 SNAPPER snelt20-112 and avoid unexpected breakdowns.
Repair Assistant
Powered by ChatGPT
Spare Parts List
2 WHEEL & TIRE ASSEMBLY, Front
Position: 1
2 PIVOT, Hood Powdered Metal
Position: 1
1 CAP, Steering Wheel, Plain
Position: 1
1 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4
Position: 1
1 PAD, Foot Pedal Reverse
Position: 1
1 VALVE, Oil Drain
Position: 1
1 VALVE, Oil Drain
Position: 1
1 SEAT, Low Back, Steel Pan
Position: 1
1 SEAT, Hi Back, Steel Pan
Position: 1
1 SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. 2, 3, 4 & 5)
Position: 1
1 DECAL, Height Of Cut
Position: 1
2 BOLT, Rear Wheel (42” Only)
Position: 1
2 NUT, Push, 3/8
Position: 1
2 NUT, Hex Flange Center Locking, 3/8-16
Position: 1
1 CLIP, Pin, Safety
Position: 1
3 NUT, Hex, Flange, 9/16-8
Position: 1
1 DECAL, Snapper, LH Hood Stripe
Position: 1
1 TIRE, Turf 15 X 6.00 - 6 Saver TL
Position: 2
16 NUT, Hex, Flange Whizlock, 5/16-18
Position: 2
1 NUT, Hex Lock, ESNA Light, 5/8-18, Thin
Position: 2
8 NUT, Hex, Flange Whizlock, 5/16-18
Position: 2
2 CARRIAGE BOLT, 5/16-18 x 1-1/4
Position: 2
12 CAPSCREW, Whizlock, 1/4-20 x 5/8
Position: 2
4 WASHER, Plain, 5/16
Position: 2
1 WASHER, 5/8
Position: 2
1 CARRIAGE BOLT, 1/4-20 x 5/8 G5
Position: 2
1 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x
Position: 2
2 WASHER, 1/2 (42” Only)
Position: 2
1 ROD, Deflector
Position: 2
2 WASHER, Plain, 13/32 x 1-1/2 x 1/8
Position: 2
6 WASHER, Belleville
Position: 2
1 DECAL, Snapper, RH Hood Stripe
Position: 2
1 TUBE, Tire, Front
Position: 3
1 WASHER, 5/8
Position: 3
1 ROD, Bypass, 11.44 LG Yellow
Position: 3
2 SPACER, Pivot 0.330ID 1.76OD .37TH Powdered Metal
Position: 3
1 EDGING, Rubber, Short (B&S V-Twin)
Position: 3
1 EDGING, Rubber, Long (B&S Single Only)
Position: 3
1 EDGING, Rubber, Short (B&S V-Twin & Kohler Single)
Position: 3
1 DUCT, Air Inlet Plastic
Position: 3
1 LATCH, Seat 20GA E-Coat
Position: 3
1 LOCKWASHER, Internal Tooth, 5/8
Position: 3
1 WASHER, Plain, 13/32 x 1-1/2 x 1/8
Position: 3
2 WHEEL, Gauge (42” Only)
Position: 3
6 BOLT, Carriage, 5/16-18 x 3/4
Position: 3
2 NUT, ESNA, Lock, 1/2-13 (Thin)
Position: 3
3 PULLEY, RH Arbor & LH Arbor, 4-1/4
Position: 3
3 PULLEY, RH Arbor & LH Arbor, 4-1/2
Position: 3
1 DECAL, Ignition Switch Symbol, White/Black
Position: 3
1 WHEEL & BUSHINGS ASSEMBLY, Front
Position: 4
2 CARRIAGE BOLT, 5/16-18 x
Position: 4
1 STEERING WHEEL, w/Aluminum Insert
Position: 4
2 PIN, Quick
Position: 4
1 CONTROL, Throttle Double 20.5, 23.5 B&S Single
Position: 4
1 CONTROL, Throttle Double 34.7, 36 B&S Twin
Position: 4
1 CONTROL, Throttle Double 19” Long (Kohler Single)
Position: 4
1 CONTROL, Throttle Double 34.7” Long (B&S Twin)
Position: 4
1 SCREW, Pan Head #10-24 x 1/2
Position: 4
4 CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x
Position: 4
1 NUT, Hex, Flange, 5/8-32
Position: 4
1 NUT, Hex Flange Whiz, 1/4-20
Position: 4
11 NUT, Hex, Flange Whizlock, 5/16-18 (38” Only)
Position: 4
13 NUT, Hex, Flange Whizlock, 5/16-18 (42” Only)
Position: 4
1 SPACER
Position: 4
2 SPACER
Position: 4
2 HUB, Pulley, RH (Middle)
Position: 4
2 HUB, Pulley, RH
Position: 4
1 DECAL, Steering Wheel Icon
Position: 4
4 BEARING
Position: 5
14 SCREW, Taptite, 5/16-18 x 5/8
Position: 5
1 RING, Klipring Extension
Position: 5
1 NUT, Hex Flange, 5/16-18 ESNA
Position: 5
1 SPACER, Foot Pedal Powdered Metal
Position: 5
2 CLAMP, Hose Type E
Position: 5
2 PUSH NUT
Position: 5
4 SPACER, 0.32 ID x 1-1/2 OD x 3/10 THK Powdered Metal Yellow
Position: 5
1 COVER, Ignition
Position: 5
1 GRIP
Position: 5
1 SPACER, 0.387 ID x 1-1/2 OD x 1.04 LG Powdered Metal
Position: 5
1 SPRING, Torsion
Position: 5
1 CAPSCREW, Hex Head, 3/8-16 x 2-1/2
Position: 5
1 PIN, Hitch
Position: 5
3 SPACER
Position: 5
1 DECAL, Height of Cut
Position: 5
1 FITTING, Grease, 1/4-28 Thread
Position: 6
1 CAPSCREW, Hex Head, 5/8-11 x 3-1/4 G5
Position: 6
2 WASHER
Position: 6
6 NUT, Hex, Flange Whizlock, 5/16-18
Position: 6
1 HOSE, Fuel, 45-1/2” Long (B&S V-Twin)
Position: 6
1 HOSE, Fuel 55” Long (B&S Single Only)
Position: 6
1 HOSE, Fuel, 45-1/2” Long (B&S V-Twin & Kohler Single)
Position: 6
1 KNOB, Cruise Lock Green Plastic
Position: 6
1 IGNITION KEY (Set of 2)
Position: 6
1 ROD, Lift Handle E-Coat, 17.7 LG
Position: 6
1 CAPSCREW, Hex Head, 3/8-16 x 2-1/4
Position: 6
2 NUT, Hex Flange, 3/8-16 ESNA (42” Only)
Position: 6
6 NUT, Hex, Flange Whizlock, 5/16-18
Position: 6
1 WASHER, 3/8
Position: 6
1 DECAL, Snapper Rear Stripe, Silver/ 8.5LG
Position: 6
2 VALVE STEM & CAP
Position: 7
1 WASHER, Flat, 5/8
Position: 7
2 BUSHING, Steering
Position: 7
1 ACTUATOR, RMO Switch 20GA
Position: 7
2 CLIP, Hose, Plastic, Push-In
Position: 7
1 COVER, Steering Shaft Plastic
Position: 7
2 CARRIAGE BOLT, 5/16-18 x 3/4
Position: 7
1 SWITCH, Headlights, 2 Terminal
Position: 7
4 WASHER, 3/8
Position: 7
11 BOLT, Carriage, 5/16-18 x 3/4 (38” Only)
Position: 7
13 BOLT, Carriage, 5/16-18 x 3/4 (42” Only)
Position: 7
1 DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted
Position: 7
1 PULLEY ASSEMBLY
Position: 7
6 BEARING
Position: 7
1 DECAL, Transmission Tow/ Release Lever
Position: 7
8 WASHER, 3/4
Position: 8
4 NUT, Hex, Flange Whizlock, 5/16-18
Position: 8
1 TRANSMISSION ASSEMBLY, K46
Position: 8
1 TRANSMISSION ASSEMBLY, K46HD (Used with 22” Tire Models)
Position: 8
1 ROD, Cruise Latch, 16.97LG
Position: 8
2 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4
Position: 8
1 PLUG, Hole, Square
Position: 8
1 WASHER, Plain, 21/64 x 1-1/4
Position: 8
2 IDLER, Flat
Position: 8
1 SPACER
Position: 8
3 GASKET, Foam
Position: 8
1 DECAL, Fuel Level
Position: 8
4 WASHER, Special Yellow
Position: 9
4 SCREW, Hex Head Flange Lock, 5/16-18 x 2-1/2
Position: 9
2 CLIP, Linkage, Black
Position: 9
4 SCREW, Taptite, 5/16-18 x 5/8
Position: 9
2 WASHER, Plain, 5/16
Position: 9
4 BOLT, Carriage, 5/16-18 x 3/4
Position: 9
1 PLUG, Hour Meter (Kohler and B&S Single)
Position: 9
1 SPRING, Torsion, 2.12 LG Black
Position: 9
2 PULLEY (42” Only)
Position: 9
2 PULLEY (38” Only)
Position: 9
1 NUT, Whizlock, 3/8-16
Position: 9
2 CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/4
Position: 9
1 DECAL, Tunnel
Position: 9
1 DECAL, Safety Instructions (CE)
Position: 9
4 RING, Retaining
Position: 10
4 CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/4
Position: 10
1 ROD, Parking Brake, 16.38 LG Yellow
Position: 10
1 KEY, Hi-Pro, 1/4 x 2-1/2
Position: 10
2 KEY, Square, 1/4 x 1/4 x 29/32 Hard
Position: 10
1 KNOB, Brake Lock Plastic
Position: 10
4 NUT, Hex Flange, 5/16-18 ESNA
Position: 10
1 METER, Hour, LCD (B&S V-Twin Only)
Position: 10
1 CAPSCREW, Hex Head, 3/8-16 X 1-3/4
Position: 10
1 SPRING, Extension, Idler Arm (44” Mower Deck)
Position: 10
1 SPRING, Extension, Idler Arm (50” Mower Deck)
Position: 10
4 NUT, Hex Flange, 3/8-16 ESNA
Position: 10
1 DECAL, Belts, Blades
Position: 10
4 CAP, Hub
Position: 11
2 NUT, Whizlock, 3/8-16
Position: 11
1 SPACER
Position: 11
2 CARRIAGE BOLT, 3/8-16 x 1-1/4
Position: 11
1 PULLEY
Position: 11
1 DASHBOARD
Position: 11
2 BOLT, Shoulder 5/16-18 G5
Position: 11
1 WASHER, Plain, 1/4 (6 Total for Export)
Position: 11
1 SPACER, Pivot 0.330ID 1.76OD .37TH Powdered Metal
Position: 11
2 BEARING, Upper
Position: 11
1 V BELT, Arbor Drive, 44”
Position: 11
1 V BELT, Arbor Drive, 44” (CE Only)
Position: 11
1 V-BELT, Arbor Drive, 50”
Position: 11
4 WASHER, 1/2
Position: 11
1 HUB, Adapter, LH
Position: 11
2 KEY, 3/16 x 3/16 x
Position: 12
14 CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/4
Position: 12
1 GEAR, Steering, 26 teeth
Position: 12
1 V-BELT, Drive Belt, Aramid/Kevlar
Position: 12
1 SPACER, 1.01 ID x 1.68 OD x 3/8 LG Powdered Metal Yellow
Position: 12
1 GUIDE, Hood RH
Position: 12
2 SPRING, Compression
Position: 12
1 NUT, Wing, 1/4-20
Position: 12
3 NUT, Hex, Flange Whizlock, 5/16-18
Position: 12
2 NUT, Hex Lock, ESNA Light, 5/8-18, Thin
Position: 12
1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4, G8
Position: 12
4 WHEEL, Gauge
Position: 12
1 DECAL, LT200 18.5HP
Position: 12
1 DECAL, LT200 20HP
Position: 12
1 DECAL, LT200 22HP
Position: 12
2 WASHER
Position: 13
2 SPACER, Sector Gear 0.374ID 1.25OD Powdered Metal Yellow
Position: 13
1 SPRING, Extension 07.52 LG Black
Position: 13
1 TIE, Self Locking 7-5/16
Position: 13
2 WASHER
Position: 13
4 WASHER, Spring Black
Position: 13
1 CARRIAGE BOLT, 1/4-20 x 7/8
Position: 13
1 SPRING, Extension 07.75 LG Black
Position: 13
1 PIN, Hitch
Position: 13
2 SPACER, Pulley, 38” Deck
Position: 13
4 BOLT, Rear Wheel
Position: 13
29 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4
Position: 13
1 CAPSCREW, Hex Head, Serrated Flange Taptite, 5/16-18 x 2 G5
Position: 13
1 DECAL, Danger, Chute in Place
Position: 13
2 SPACER, 0.77 ID x 1-1/4 OD x 1.65 LG Powdered Metal Black
Position: 14
2 CAPSCREW, Hex, Flange, Whizlock, 3/8-16 x
Position: 14
1 WASHER, Flat, 5/16
Position: 14
1 PULLEY, 3 OD Plastic
Position: 14
1 CLUTCH ASSEMBLY, Long OGURA
Position: 14
1 CLUTCH ASSEMBLY, Mid-Range OGURA
Position: 14
2 RIVET, Pop, Stem Black
Position: 14
2 COVER, Spring
Position: 14
1 NUT, Push On
Position: 14
1 NUT, 3/8-16, Hex Flange MAC Locking Large, Black
Position: 14
2 SPACER, .532 ID x 3/4 OD x 1-1/4 LG Yellow
Position: 14
2 RETAINING RING, Extension, 1-3/4
Position: 14
3 WASHER
Position: 14
1 NUT, 1/4-20
Position: 14
1 DECAL, Pinch Point
Position: 14
2 WHEEL & TIRE ASSEMBLY, Rear 20”
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 22”
Position: 15
1 NUT, Hex Flange Two-Way Lock, 5/8-11
Position: 15
1 SHAFT, Steering Gear & Spline Yellow
Position: 15
1 CAPSCREW, Hex Head, 5/16-18 x
Position: 15
2 NUT, Hex Flange, 3/8-16 ESNA
Position: 15
1 WASHER
Position: 15
1 GUIDE, Hood LH
Position: 15
1 POD, LH Cup Holder
Position: 15
1 HOLD DOWN, Battery
Position: 15
4 CLIP, Spring
Position: 15
2 BOLT, Carriage, 5/16-18 x 3/4
Position: 15
2 NUT, ESNA, Lock, 1/2-13 (Thin)
Position: 15
10 SCREW, Hex, Washer Head, Taptite, 3/8-16 x 3/4
Position: 15
1 SHAFT, Arbor
Position: 15
26 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4
Position: 15
1 DECAL, Danger, Hand Under Deck
Position: 15
1 TIRE, Turf 22 X 8.00 - 8 Saver TL
Position: 16
1 TIRE, Turf 22 X 10.00 - 8 Saver TL
Position: 16
1 CARRIAGE BOLT, 5/16-18 x
Position: 16
1 CAPSCREW, 7/16-20 x 3-1/2, Hex Head
Position: 16
1 CAPSCREW, 7/16-20 x
Position: 16
12 NUT, Hex Flange Whiz, 1/4-20
Position: 16
1 ELBOW FITTING
Position: 16
1 SWITCH, Push Button (NC)
Position: 16
2 WASHER, 1/2
Position: 16
1 V-BELT, 91.10 LG Kevlar
Position: 16
1 V-BELT, 94.45 LG Kevlar
Position: 16
1 CLIP, Pin, Safety
Position: 16
3 SHIELD, Grass, Lower
Position: 16
1 TUBE, Tire, Rear, 22 X 8 -
Position: 17
1 TUBE, Tire, Rear, 22 X 10 -
Position: 17
2 LOCKNUT, Hex, Flange, 7/16-14
Position: 17
1 WASHER, Plain, 5/16
Position: 17
1 PULLEY, Idler
Position: 17
1 LOCKWASHER, 7/16
Position: 17
1 BUSHING
Position: 17
3 TIE, Self Locking 7-5/16
Position: 17
2 PIN, Threaded Shoulder
Position: 17
3 BLADE, 44”
Position: 17
1 DECAL, 38”
Position: 17
1 DECAL, 42”
Position: 17
1 DECAL, 50”
Position: 17
1 WHEEL, Hub
Position: 18
4 BUSHING, Nylon, 3/4 Diameter
Position: 18
1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4
Position: 18
1 SPRING, Extension
Position: 18
4(1) SCREW, Hex, Washer Head, Taptite, 3/8-16 x 1-1/4
Position: 18
3 CAPSCREW, Hex Head, Taptite, 3/8-16 x 1-1/2 (B&S Single Only)
Position: 18
1 ROD, Dash Support
Position: 18
1 TANK, Fuel
Position: 18
1 OUTLET, 12 Volt DC Power
Position: 18
1 ROD, Bail Mowers Yellow
Position: 18
1 FITTING, Grease
Position: 18
3 WASHER, Hex
Position: 18
1 DECAL, Hand Under Deck (CE)
Position: 18
3 FITTING, Zerk
Position: 19
1 PIN, Cotter 3/32 x 3/4
Position: 19
1 WASHER, 3/8
Position: 19
1 SCREW, Taptite, 1/4-20 x 1/2
Position: 19
1 CAP, Gas
Position: 19
1 PLUG, Hole Models W/O 12V Adapter
Position: 19
2 NUT, Hex, Flange, Whizlock, 5/16-18 x 1/2
Position: 19
1 SHAFT, Spindle, 38” Deck
Position: 19
3 WASHER, Spring
Position: 19
1 LINK, Drag
Position: 20
1 ROD, Brake, 15.1 LG
Position: 20
1 RETAINER, Clutch, Yellow
Position: 20
1 RETAINER, Clutch, Black
Position: 20
1 NUT, Hex, Nylon, Lock, #10-24
Position: 20
1 PAD, Footrest LH
Position: 20
1 SWITCH, Push Button (NO/NC)
Position: 20
2 DECAL, CAUTION! Pinch Point
Position: 20
3 CAPSCREW, Hex Head, 7/16-14 x 1-1/4
Position: 20
3 BLADE, 18-1/8, 50” Deck
Position: 20
1 SPRING, Extension 05.37 LG Black
Position: 21
1 LOCKWASHER, External Tooth, 3/8
Position: 21
2 BOLT, Shoulder
Position: 21
4 WASHER, Belleville
Position: 21
2 BOLT, Carriage, 5/16-18 x 3/4
Position: 21
8 BOLT, Carriage, 5/16-18 x 3/4 (CE Only)
Position: 21
2 NUT, Hex Nylock 3/8-24
Position: 22
1 PEDAL, Brake Rubber
Position: 22
1 PAD, Footrest RH
Position: 22
4 SCREW, Taptite, 5/16-18 x 5/8
Position: 22
2 NUT, Hex 9/16-18
Position: 22
4 WASHER, 3/4
Position: 23
1 PIN, Quick
Position: 23
4 SCREW, Taptite, 1/4-20 x 1/2
Position: 23
1 HEADLIGHT ASSEMBLY (Includes Ref. 24, 25, 26 & 27)
Position: 23
2 SPACER (Used on 38” & 42” Mower
Position: 23
2 SPACER (Used on 44” & 50” Mower
Position: 23
2 BLADE, Mower 42” (42” Only)
Position: 23
2 BLADE, Mower 38” (38” Only)
Position: 23
2 NUT, Hex, Flange Whizlock, 5/16-18
Position: 23
8 NUT, Hex, Flange Whizlock, 5/16-18
Position: 23
1 ROD, Brake Return, 12.60 LG
Position: 24
1 PIPE, Exhaust w/Flange LH B&S INT
Position: 24
1 INSERT, Lightbar
Position: 24
6 SCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/2
Position: 24
2 SOCKET ASSEMBLY
Position: 24
2 TRUNNION, Powdered Metal
Position: 24
2 WASHER, Spindle Blade Powdered Metal
Position: 24
2 NUT, Hex, Flange, Locking, 3/8-16
Position: 25
1 PIPE, Exhaust w/Flange RH B&S INT
Position: 25
1 HEADLIGHT ASSEMBLY
Position: 25
2 SCREW, Taptite, 5/16-18 x 5/8
Position: 25
2 BULB, 1141-12V 21CP
Position: 25
2 ROD, Lower Life, 10.00 LG
Position: 25
1 ROD, Cruise Latch, 2.83 LG
Position: 26
2(1) GASKET, Exhaust B&S
Position: 26
1 POD, RH Lift Quadrant
Position: 26
1 REFLECTOR, Headlight
Position: 26
2 SHAFT, Arbor, RH
Position: 26
3 NUT, Hex, Flange Whizlock, 5/16-18
Position: 26
2 BUSHING, Powdered Metal
Position: 27
1 SPRING, Tension, Clutch
Position: 27
4(2) LOCKWASHER, 5/16
Position: 27
1 LENS, Headlight
Position: 27
1 ROD, Lift, 5.43 LG
Position: 27
2 CARRIAGE BOLT, 1/4-20 x 1, Black
Position: 27
2 CAPSCREW, Hex Head, 3/8-16 x 1-1/4, .141 Thread G5
Position: 28
1 LATCH, Cruise Powdered Metal
Position: 28
4(2) CAPSCREW, Socket Head, 5/16-18 x 3/4
Position: 28
1 CLIP, Speed Wire
Position: 28
1 SPRING, Extension 5.10 LG Black (Used on 44” & 50” Mower
Position: 28
1 COVER, Arbor, RH
Position: 28
2 CAPSCREW, 7/16-14 x
Position: 29
1 BOLT, Shoulder 5/16-18 G5
Position: 29
1 NUT, Hex, Flange, 1/4-20
Position: 29
2 NUT, Push On
Position: 29
1 MUFFLER, B&S Twin
Position: 30
1 COVER, Terminal
Position: 30
2 WASHER, Plain, 1/4 (6 Total for Export)
Position: 30
2 BUSHING, Axle Pivot Powdered Metal
Position: 31
1 BOLT, Shoulder 5/16-18 G5
Position: 31
1 CLIP, Wire
Position: 31
1 HARNESS, Wiring
Position: 31
1 CLAMP
Position: 31
1 AXLE, Front Iron Casting Machined
Position: 32
3 SCREW, Taptite, 5/16-18 x 5/8
Position: 32
1 CABLE, Solenoid to Starter
Position: 32
2 NUT, Hex Lock, ESNA, 1/4-20
Position: 32
2 RING, Klipring Extension
Position: 33
1 MUFFLER, B&S Single
Position: 33
1 MUFFLER, B&S Single
Position: 33
1 SOLENOID
Position: 33
1 WASHER, Flat, 5/16
Position: 33
2 CAP, Hub
Position: 34
1 PIPE, Exhaust w/Flange B&S 1 Cycle
Position: 34
1 PIPE, Exhaust w/Flange Kohler
Position: 34
2 SCREW, Taptite, 1/4-20 x 1/2
Position: 34
1 DEFLECTOR, Plastic
Position: 34
1 CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/4
Position: 35
2 LOCKWASHER, External Tooth, 5/16
Position: 35
1 SPRING
Position: 35
2 NUT, Hex, 5/16-24 NF
Position: 36
1 PAD, Foot Pedal Forward
Position: 37
1 CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid
Position: 37
2 NUT, Hex, Flange Whizlock, 5/16-18
Position: 38
1 PLUG, Plastic (Not Shown)
Position: 38
1 PLUG, Plastic
Position: 38
2 CARRIAGE BOLT, 5/16-18 x 3/4
Position: 40
1 BOOT, Insulator
Position: 41
1 BATTERY
Position: 42
1 SWITCH, Push Button (NO), Reverse Pedal
Position: 43
2 NUT, Hex, Full, 1/4-20
Position: 44
2 LOCKWASHER, 1/4
Position: 45
2 WASHER, 1/4 I.D.
Position: 46
1 CABLE, Battery to Ground
Position: 47
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position: 48
1 FUSE, Wiring Harness
Position: 49
1 NO-MOW MODULE
Position: 50
1 KEY, w/Hang Tag for RMO Module
Position: 51
1 SWITCH, PTO, Push/Pull Symbols
Position: 52