Schemat rozstrzelony wp 216517 bv SNAPPER wp216517bv

Odkryj kompletny schemat rozstrzelony wp 216517 bv SNAPPER wp216517bv – niezbędny przewodnik do identyfikacji części zamiennych. Nasza prezentacja pomaga zrozumieć każdy element urządzenia wp 216517 bv. Szybko znajdź części do wp 216517 bv SNAPPER wp216517bv.

Asystent naprawy Powered by ChatGPT

Lista części zamiennych

1 HANDLE, Upper used on Push Models
1 HANDLE, Upper used on Push Models
Pozycja: 1
1 DECK, 21” Mower (painted “HV” deck w/decals)
1 DECK, 21” Mower (painted “HV” deck w/decals)
Pozycja: 1
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6)
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6)
Pozycja: 1
2 BALL BEARING, 9/16” I.D.
2 BALL BEARING, 9/16” I.D.
Pozycja: 1
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier
Pozycja: 1
1 BELT, Poly-Vee
1 BELT, Poly-Vee
Pozycja: 1
4 NUT, 5/16-24 Hex Lock, GR C
4 NUT, 5/16-24 Hex Lock, GR C
Pozycja: 1
ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only
ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only
Pozycja: 1
1 ASSEMBLY, Grass Bag (Includes 2 thru 4)
1 ASSEMBLY, Grass Bag (Includes 2 thru 4)
Pozycja: 1
1 DECAL, Blade Control
1 DECAL, Blade Control
Pozycja: 1
2 LATCH, Frame Attachment
2 LATCH, Frame Attachment
Pozycja: 1
1 SCREEN, Fastener Assembly
1 SCREEN, Fastener Assembly
Pozycja: 1
1 BATTERY, 12 Volt, 35 CCA
1 BATTERY, 12 Volt, 35 CCA
Pozycja: 1
1 HANDLE, Middle- 1990 used on All
1 HANDLE, Middle- 1990 used on All
Pozycja: 2
10 NUT, 5/16-18 Hex Flange Lock, GR5
10 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 2
2 BOLT, 5/16-18 Hex Washer Face Shoulder
2 BOLT, 5/16-18 Hex Washer Face Shoulder
Pozycja: 2
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
Pozycja: 2
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later
Pozycja: 2
1 LINK, Differential
1 LINK, Differential
Pozycja: 2
1 WASHER, Cone
1 WASHER, Cone
Pozycja: 2
1 ADAPTER, Grass Bag
1 ADAPTER, Grass Bag
Pozycja: 2
1 DECAL, Speed Select used on Self-Propelled models
1 DECAL, Speed Select used on Self-Propelled models
Pozycja: 2
1 RING, Bottom (21.77” Inside Diameter)
1 RING, Bottom (21.77” Inside Diameter)
Pozycja: 2
1 HARNESS, Battery
1 HARNESS, Battery
Pozycja: 2
1 HANDLE, Lower Left Hand used on All
1 HANDLE, Lower Left Hand used on All
Pozycja: 3
10 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
10 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Pozycja: 3
2 LATCH, Height
2 LATCH, Height
Pozycja: 3
2 LATCH, Height Adjusting (Long)
2 LATCH, Height Adjusting (Long)
Pozycja: 3
2 NUT, 7/16-20 Hex Center Lock Jam (thin)
2 NUT, 7/16-20 Hex Center Lock Jam (thin)
Pozycja: 3
2 NUT, 7/16-20 Hex Center Lock Jam
2 NUT, 7/16-20 Hex Center Lock Jam
Pozycja: 3
1 ARM, Clutch Idler
1 ARM, Clutch Idler
Pozycja: 3
1 PULLEY, Poly-Vee Belt
1 PULLEY, Poly-Vee Belt
Pozycja: 3
1 COVER, Bag Adapter
1 COVER, Bag Adapter
Pozycja: 3
1 ASSEMBLY, Bag Wire (12” Wide)
1 ASSEMBLY, Bag Wire (12” Wide)
Pozycja: 3
1 DECAL, Danger, Cut Finger
1 DECAL, Danger, Cut Finger
Pozycja: 3
2 ROD, Tine
2 ROD, Tine
Pozycja: 3
3 NUT, 5/16-24 Hex, GR5 only 1 shown
3 NUT, 5/16-24 Hex, GR5 only 1 shown
Pozycja: 3
2 SCREW, #10-24 x 1/2” Pan Head Machine
2 SCREW, #10-24 x 1/2” Pan Head Machine
Pozycja: 3
1 HANDLE, Lower Right Hand used on All
1 HANDLE, Lower Right Hand used on All
Pozycja: 4
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
Pozycja: 4
2 GRIP, Latch
2 GRIP, Latch
Pozycja: 4
1 NUT, 1/4-20 Hex
1 NUT, 1/4-20 Hex
Pozycja: 4
2 BUSHING, Axle
2 BUSHING, Axle
Pozycja: 4
1 PULLEY, Idler
1 PULLEY, Idler
Pozycja: 4
2 WASHER, Spring only 1 shown
2 WASHER, Spring only 1 shown
Pozycja: 4
1 HINGE, Chute Cover
1 HINGE, Chute Cover
Pozycja: 4
1 CONNECTOR, Grass Bag (weldment)
1 CONNECTOR, Grass Bag (weldment)
Pozycja: 4
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Pozycja: 4
1 SUPPORT, Wheel
1 SUPPORT, Wheel
Pozycja: 4
3 WASHER, 5/16” Split Lock only 1 shown
3 WASHER, 5/16” Split Lock only 1 shown
Pozycja: 4
2 NUT, #10-24 Square
2 NUT, #10-24 Square
Pozycja: 4
1 BAIL, Blade Control used on All
1 BAIL, Blade Control used on All
Pozycja: 5
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
Pozycja: 5
6 NUT, 5/16-18 Hex Flange Lock, GR5
6 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 5
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-
Pozycja: 5
4 WASHER, 7/16 x 1” O.D. Flat
4 WASHER, 7/16 x 1” O.D. Flat
Pozycja: 5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Pozycja: 5
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10)
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10)
Pozycja: 5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
Pozycja: 5
1 ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE
1 ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE
Pozycja: 5
1 DECAL, Noise (European)
1 DECAL, Noise (European)
Pozycja: 5
1 TRAY, Tine
1 TRAY, Tine
Pozycja: 5
3 SPRING only 1 shown
3 SPRING only 1 shown
Pozycja: 5
1 KEY (Set of Two)
1 KEY (Set of Two)
Pozycja: 5
1 CLIP, Blade Control used on 2002 Models & Earlier
1 CLIP, Blade Control used on 2002 Models & Earlier
Pozycja: 6
2 PLUG, Hole
2 PLUG, Hole
Pozycja: 6
2 RETAINER, 5/16” Bolt (Black)
2 RETAINER, 5/16” Bolt (Black)
Pozycja: 6
1 ASSEMBLY, Wheel Arm, Right Rear (Round used on Push models (Incl. items 3, 10, 14,
1 ASSEMBLY, Wheel Arm, Right Rear (Round used on Push models (Incl. items 3, 10, 14,
Pozycja: 6
2 PLUG, Wheel
2 PLUG, Wheel
Pozycja: 6
1 NUT, 1/4-28 Hex Top Lock
1 NUT, 1/4-28 Hex Top Lock
Pozycja: 6
1 HOUSING, Right Side
1 HOUSING, Right Side
Pozycja: 6
5 WASHER, 1/4” Internal Tooth Lock
5 WASHER, 1/4” Internal Tooth Lock
Pozycja: 6
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
Pozycja: 6
1 DECAL, 2001 Year of Manufacture not shown
1 DECAL, 2001 Year of Manufacture not shown
Pozycja: 6
6 KIT, Tine Thatching Spring
6 KIT, Tine Thatching Spring
Pozycja: 6
1 BEZEL (Seal & Face Nut)
1 BEZEL (Seal & Face Nut)
Pozycja: 6
1 CABLE, Blade Control (49-1/4” long) used on 2002 Models & Earlier
1 CABLE, Blade Control (49-1/4” long) used on 2002 Models & Earlier
Pozycja: 7
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
Pozycja: 7
2 NUT, 5/16-18 Hex Flange Lock
2 NUT, 5/16-18 Hex Flange Lock
Pozycja: 7
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14,
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14,
Pozycja: 7
2 BUSHING, 3/8” Plastic
2 BUSHING, 3/8” Plastic
Pozycja: 7
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
Pozycja: 7
5 NUT, 1/4-20 Hex
5 NUT, 1/4-20 Hex
Pozycja: 7
1 ADAPTER, Bag
1 ADAPTER, Bag
Pozycja: 7
1 DECAL, Patent Numbers
1 DECAL, Patent Numbers
Pozycja: 7
1 BUSHING, Wheel Adjuster
1 BUSHING, Wheel Adjuster
Pozycja: 7
1 BRACKET, Ignition Switch
1 BRACKET, Ignition Switch
Pozycja: 7
1 HANDLE, Wheel Drive used on Self-Propelled
1 HANDLE, Wheel Drive used on Self-Propelled
Pozycja: 8
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
Pozycja: 8
1 WELDMENT, Front Wheel Bracket used on 2002 Model Year and Earlier
1 WELDMENT, Front Wheel Bracket used on 2002 Model Year and Earlier
Pozycja: 8
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models (Incl. items 1,
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models (Incl. items 1,
Pozycja: 8
1 SHAFT, Hex Drive
1 SHAFT, Hex Drive
Pozycja: 8
2 SEAL, 5/8” Internal Dia.
2 SEAL, 5/8” Internal Dia.
Pozycja: 8
1 STOP, Cover
1 STOP, Cover
Pozycja: 8
1 BRACKET, Rope Pulley
1 BRACKET, Rope Pulley
Pozycja: 8
1 DECAL, Warning (Euro)
1 DECAL, Warning (Euro)
Pozycja: 8
1 AXLE, Wheel
1 AXLE, Wheel
Pozycja: 8
1 COVER, Switch
1 COVER, Switch
Pozycja: 8
1 GRIP, Wheel Drive Handle used on Self-Propelled
1 GRIP, Wheel Drive Handle used on Self-Propelled
Pozycja: 9
1 BUSHING used on Euro models
1 BUSHING used on Euro models
Pozycja: 9
1 AXLE
1 AXLE
Pozycja: 9
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models (Incl. items 1,
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models (Incl. items 1,
Pozycja: 9
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
Pozycja: 9
2 BEARING, Tapered- (Differential Housing)
2 BEARING, Tapered- (Differential Housing)
Pozycja: 9
1 MOLDING, Trim
1 MOLDING, Trim
Pozycja: 9
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
Pozycja: 9
1 DECAL, Warning
1 DECAL, Warning
Pozycja: 9
1 WHEEL, 7.00 x 1.50 Gage
1 WHEEL, 7.00 x 1.50 Gage
Pozycja: 9
1 NUT, 5/8-32 Hex Lock
1 NUT, 5/8-32 Hex Lock
Pozycja: 9
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
Pozycja: 10
1 COVER, Belt used on Euro models
1 COVER, Belt used on Euro models
Pozycja: 10
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
Pozycja: 10
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Pozycja: 10
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375
Pozycja: 10
1 BUSHING, Flange
1 BUSHING, Flange
Pozycja: 10
1 DECAL, Euro Community (CE)
1 DECAL, Euro Community (CE)
Pozycja: 10
10 NUT, 1/4-20 Hex Top Lock only 9 shown
10 NUT, 1/4-20 Hex Top Lock only 9 shown
Pozycja: 10
1 SWITCH, Ignition (spring loaded ON/OFF
1 SWITCH, Ignition (spring loaded ON/OFF
Pozycja: 10
1 COVER, Vinyl used on Self-Propelled
1 COVER, Vinyl used on Self-Propelled
Pozycja: 11
2 WASHER, 7/16” Flat used on Euro models
2 WASHER, 7/16” Flat used on Euro models
Pozycja: 11
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
Pozycja: 11
1 SPRING, Torsion
1 SPRING, Torsion
Pozycja: 11
1 PLUG, Housing
1 PLUG, Housing
Pozycja: 11
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
Pozycja: 11
1 PULLEY, Plastic
1 PULLEY, Plastic
Pozycja: 11
1 DECAL, Deck/Chute (European)
1 DECAL, Deck/Chute (European)
Pozycja: 11
4 WASHER, 1/4” Flat
4 WASHER, 1/4” Flat
Pozycja: 11
1 SPACER
1 SPACER
Pozycja: 11
1 SPRING, Clutch used on Self-Propelled
1 SPRING, Clutch used on Self-Propelled
Pozycja: 12
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
Pozycja: 12
1 ARM, Wheel, Right Rear used on Self-Propelled models
1 ARM, Wheel, Right Rear used on Self-Propelled models
Pozycja: 12
1 STUD, Idler (3/8-24 thread)
1 STUD, Idler (3/8-24 thread)
Pozycja: 12
1 GEAR, Input
1 GEAR, Input
Pozycja: 12
1 NUT, 5/16-18 Hex Large Flange Center Lock
1 NUT, 5/16-18 Hex Large Flange Center Lock
Pozycja: 12
1 NUT, 5/16-18 Hex Flange Lock GR5
1 NUT, 5/16-18 Hex Flange Lock GR5
Pozycja: 12
1 DECAL, Deck Warning
1 DECAL, Deck Warning
Pozycja: 12
2 SPRING, Compression
2 SPRING, Compression
Pozycja: 12
2 WASHER, 1/4” Internal Tooth Lock
2 WASHER, 1/4” Internal Tooth Lock
Pozycja: 12
1 SECTOR, Speed used on all other Self-Propelled models
1 SECTOR, Speed used on all other Self-Propelled models
Pozycja: 13
2 WASHER, 3/8” I.D. Cone
2 WASHER, 3/8” I.D. Cone
Pozycja: 13
1 ARM, Wheel, Left Rear used on Self-Propelled models
1 ARM, Wheel, Left Rear used on Self-Propelled models
Pozycja: 13
1 HOLDER, Bearing (Inner Half)
1 HOLDER, Bearing (Inner Half)
Pozycja: 13
1 AXLE, Short
1 AXLE, Short
Pozycja: 13
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Pozycja: 13
4 WASHER, 15/32” Flat
4 WASHER, 15/32” Flat
Pozycja: 13
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
Pozycja: 13
2 NUT, 1/4-28 Hex, GR5 or B
2 NUT, 1/4-28 Hex, GR5 or B
Pozycja: 13
3 WIRE TIE, 1.29” Long (Black) used on Self-Propelled
3 WIRE TIE, 1.29” Long (Black) used on Self-Propelled
Pozycja: 14
1 BLADE, Cutter (European) used on Euro models
1 BLADE, Cutter (European) used on Euro models
Pozycja: 14
2 BOLT, 5/16-18 x 1” Shoulder
2 BOLT, 5/16-18 x 1” Shoulder
Pozycja: 14
1 BEARING, Ball, .38 I.D. Spherical O.D.
1 BEARING, Ball, .38 I.D. Spherical O.D.
Pozycja: 14
1 GEAR, Differential (46 tooth)
1 GEAR, Differential (46 tooth)
Pozycja: 14
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Pozycja: 14
4 RIVET
4 RIVET
Pozycja: 14
1 DECAL, Front Baffle used on “FRP” & “EFRP” Air Models only
1 DECAL, Front Baffle used on “FRP” & “EFRP” Air Models only
Pozycja: 14
2 NUT, 1/4-20 Hex, GR5
2 NUT, 1/4-20 Hex, GR5
Pozycja: 14
1 HARNESS, Wiring
1 HARNESS, Wiring
Pozycja: 14
1 SPRING, Speed Control used on Self-Propelled
1 SPRING, Speed Control used on Self-Propelled
Pozycja: 15
1 HUB, Blade Drive 25mm used on Briggs Models
1 HUB, Blade Drive 25mm used on Briggs Models
Pozycja: 15
2 RETAINER, 5/16” Bolt
2 RETAINER, 5/16” Bolt
Pozycja: 15
1 O-RING
1 O-RING
Pozycja: 15
2 PLATE, 46T Gear
2 PLATE, 46T Gear
Pozycja: 15
1 CHUTE, Side
1 CHUTE, Side
Pozycja: 15
1 PLUG, Chute Adapter
1 PLUG, Chute Adapter
Pozycja: 15
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Pozycja: 15
2 CAP, Vinyl
2 CAP, Vinyl
Pozycja: 15
1 BRACKET, Battery
1 BRACKET, Battery
Pozycja: 15
1 WASHER, 3/8” Flat used on Self-Propelled
1 WASHER, 3/8” Flat used on Self-Propelled
Pozycja: 16
1 KEY, Woodruff # 605 used on Briggs Models
1 KEY, Woodruff # 605 used on Briggs Models
Pozycja: 16
1 NUT, 3/8-24 Hex Center Lock GR5 or B
1 NUT, 3/8-24 Hex Center Lock GR5 or B
Pozycja: 16
2 WASHER, Thrust, 3/4” I.D.
2 WASHER, Thrust, 3/4” I.D.
Pozycja: 16
2 WASHER, 5/16” Flat
2 WASHER, 5/16” Flat
Pozycja: 16
1 DECAL, Medallion
1 DECAL, Medallion
Pozycja: 16
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
Pozycja: 16
1 COVER, Battery
1 COVER, Battery
Pozycja: 16
1 GRIP, Speed Control Handle used on all other Self-Propelled models
1 GRIP, Speed Control Handle used on all other Self-Propelled models
Pozycja: 17
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
Pozycja: 17
1 BRACKET, Right Rear Wheel
1 BRACKET, Right Rear Wheel
Pozycja: 17
1 HOLDER, Bearing (Outer Half)
1 HOLDER, Bearing (Outer Half)
Pozycja: 17
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
Pozycja: 17
2 WING-NUT, 5/16-18 Nyloc
2 WING-NUT, 5/16-18 Nyloc
Pozycja: 17
1 DECAL, OPEI
1 DECAL, OPEI
Pozycja: 17
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
Pozycja: 17
1 ANCHOR, Speed Control used on all other Self-Propelled models
1 ANCHOR, Speed Control used on all other Self-Propelled models
Pozycja: 18
1 PULLEY, Engine (25mm I.D. x 2-1/8” O.D.) used on Briggs Models
1 PULLEY, Engine (25mm I.D. x 2-1/8” O.D.) used on Briggs Models
Pozycja: 18
1 BRACKET, Left Rear Wheel
1 BRACKET, Left Rear Wheel
Pozycja: 18
1 CLIP, 1/4” Right Arc (Transfer Rod)
1 CLIP, 1/4” Right Arc (Transfer Rod)
Pozycja: 18
1 GASKET, Housing
1 GASKET, Housing
Pozycja: 18
1 COVER, 21” Deck
1 COVER, 21” Deck
Pozycja: 18
1 DECAL, SNAPPER (Commercial) gold letters/red border/black background
1 DECAL, SNAPPER (Commercial) gold letters/red border/black background
Pozycja: 18
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
Pozycja: 18
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 18
1 GUIDE, Lower V-Belt used on Self-Propelled
1 GUIDE, Lower V-Belt used on Self-Propelled
Pozycja: 19
1 WASHER, 7/16” Flat
1 WASHER, 7/16” Flat
Pozycja: 19
1 AXLE Rear axle on Push Models; Front axle on All
1 AXLE Rear axle on Push Models; Front axle on All
Pozycja: 19
1 ROD, Transfer used on Non-Euro models
1 ROD, Transfer used on Non-Euro models
Pozycja: 19
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
Pozycja: 19
2 NUT, 5/16-18 Hex Large Flange Center Lock
2 NUT, 5/16-18 Hex Large Flange Center Lock
Pozycja: 19
1 DECAL, Shift Warning used on Self-Propelled models
1 DECAL, Shift Warning used on Self-Propelled models
Pozycja: 19
6 WASHER, Reinforcing only 1 shown
6 WASHER, Reinforcing only 1 shown
Pozycja: 19
1 CLIP, Wiring
1 CLIP, Wiring
Pozycja: 19
1 ROD, Transfer used on Self-Propelled
1 ROD, Transfer used on Self-Propelled
Pozycja: 20
1 WELDMENT, Fender used on Euro models
1 WELDMENT, Fender used on Euro models
Pozycja: 20
1 GUARD, Rear Foot used on Push models
1 GUARD, Rear Foot used on Push models
Pozycja: 20
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
Pozycja: 20
1 BRACKET, Differential
1 BRACKET, Differential
Pozycja: 20
1 DECAL, Caution Tag not used in 2003 model year
1 DECAL, Caution Tag not used in 2003 model year
Pozycja: 20
6 WASHER, 5/16” Split Lock only 1 shown
6 WASHER, 5/16” Split Lock only 1 shown
Pozycja: 20
1 CHARGER, Battery (120 Volt; 60 Hertz)
1 CHARGER, Battery (120 Volt; 60 Hertz)
Pozycja: 20
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
Pozycja: 21
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 (only one shown)
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 (only one shown)
Pozycja: 21
1 GUARD, Rear Foot used on Self-Propelled models (except
1 GUARD, Rear Foot used on Self-Propelled models (except
Pozycja: 21
1 PLATE, Thrust
1 PLATE, Thrust
Pozycja: 21
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
Pozycja: 21
1 DECAL, Ninja
1 DECAL, Ninja
Pozycja: 21
6 NUT, 5/16-18 Hex, GR5 only 1 shown
6 NUT, 5/16-18 Hex, GR5 only 1 shown
Pozycja: 21
1 TEE-NUT, 5/16-18 used on Self-Propelled
1 TEE-NUT, 5/16-18 used on Self-Propelled
Pozycja: 22
2 RETAINER, 5/16” Bolt (only one shown)
2 RETAINER, 5/16” Bolt (only one shown)
Pozycja: 22
1 RING, Split (Black) used on Self-Propelled models
1 RING, Split (Black) used on Self-Propelled models
Pozycja: 22
2 RING, 5/8” External Retaining used on Self-Propelled
2 RING, 5/8” External Retaining used on Self-Propelled
Pozycja: 22
1 SPACER, Axle Gear
1 SPACER, Axle Gear
Pozycja: 22
1 DECAL, Hi-Vac
1 DECAL, Hi-Vac
Pozycja: 22
2 NUT, 1/2” Push
2 NUT, 1/2” Push
Pozycja: 22
1 BUSHING, Differential used on Self-Propelled
1 BUSHING, Differential used on Self-Propelled
Pozycja: 23
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 23
1 SUPPORT, Foot Guard used on Self-Propelled models
1 SUPPORT, Foot Guard used on Self-Propelled models
Pozycja: 23
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
Pozycja: 23
1 AXLE, Long
1 AXLE, Long
Pozycja: 23
4 BEARING, Nyliner
4 BEARING, Nyliner
Pozycja: 23
2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Pozycja: 23
1 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
1 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
Pozycja: 24
2 LIFT, Air
2 LIFT, Air
Pozycja: 24
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
Pozycja: 24
4 SCREW, #10-32 x 1/4” Self-Tap Machine
4 SCREW, #10-32 x 1/4” Self-Tap Machine
Pozycja: 24
4 GEAR, Pinion (12 tooth)
4 GEAR, Pinion (12 tooth)
Pozycja: 24
1 SCREW, 5/16-18 x 1/4” Set
1 SCREW, 5/16-18 x 1/4” Set
Pozycja: 24
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
Pozycja: 25
4 WASHER, 5/16” Internal Tooth Lock
4 WASHER, 5/16” Internal Tooth Lock
Pozycja: 25
1 WASHER, 1/4” Internal Tooth Lock
1 WASHER, 1/4” Internal Tooth Lock
Pozycja: 25
1 SHIELD, Hex Shaft used on Self-Propelled Euro only
1 SHIELD, Hex Shaft used on Self-Propelled Euro only
Pozycja: 25
4 SPACER, Pinion Gear
4 SPACER, Pinion Gear
Pozycja: 25
2 WASHER, 1/2” Flat
2 WASHER, 1/2” Flat
Pozycja: 25
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 used on All
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 used on All
Pozycja: 26
4 NUT, 5/16-24 Hex, GR5
4 NUT, 5/16-24 Hex, GR5
Pozycja: 26
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Pozycja: 26
1 BALL JOINT, 1/4-28 used on Self-Propelled Euro only
1 BALL JOINT, 1/4-28 used on Self-Propelled Euro only
Pozycja: 26
4 SHAFT, Pinion
4 SHAFT, Pinion
Pozycja: 26
1 DECAL, Adjustment
1 DECAL, Adjustment
Pozycja: 26
10 NUT, 5/16-18 Hex Flange Lock GR5 used on All
10 NUT, 5/16-18 Hex Flange Lock GR5 used on All
Pozycja: 27
4 SCREW, 5/16-24 x 21/32” Machine
4 SCREW, 5/16-24 x 21/32” Machine
Pozycja: 27
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only
Pozycja: 27
4 NUT, #10-32 Hex Nyloc only 1 shown
4 NUT, #10-32 Hex Nyloc only 1 shown
Pozycja: 27
1 DECAL, Thatcherizer
1 DECAL, Thatcherizer
Pozycja: 27
1 NUT, 5/16-24 Hex Center Lock GR5 used on All
1 NUT, 5/16-24 Hex Center Lock GR5 used on All
Pozycja: 28
2 NUT, 5/16-18 Hex Center Lock
2 NUT, 5/16-18 Hex Center Lock
Pozycja: 28
1 LINK, Transfer used on Self-Propelled Euro only
1 LINK, Transfer used on Self-Propelled Euro only
Pozycja: 28
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
Pozycja: 28
1 CLIP, Cable/Wiring used on All
1 CLIP, Cable/Wiring used on All
Pozycja: 29
1 DECAL, Front Baffle
1 DECAL, Front Baffle
Pozycja: 29
1 WASHER, 3/4” Shim
1 WASHER, 3/4” Shim
Pozycja: 29
1 HOUSING, Left
1 HOUSING, Left
Pozycja: 29
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 used on All
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 used on All
Pozycja: 30
1 BAFFLE, Front used on “FRP” & “EFRP” Air Models only
1 BAFFLE, Front used on “FRP” & “EFRP” Air Models only
Pozycja: 30
3 WASHER, 3/8” Internal Tooth Lock
3 WASHER, 3/8” Internal Tooth Lock
Pozycja: 30
3 GASKET, 5/8” O. D.
3 GASKET, 5/8” O. D.
Pozycja: 30
4 T-KNOB, 5/16-18 (BLACK) used on All
4 T-KNOB, 5/16-18 (BLACK) used on All
Pozycja: 31
1 DECAL, Front Baffle
1 DECAL, Front Baffle
Pozycja: 31
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Pozycja: 31
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
Pozycja: 32
2 BOLT, 5/16-18 x 3/4” Carriage, GR5
2 BOLT, 5/16-18 x 3/4” Carriage, GR5
Pozycja: 32
3 NUT, 3/8-24 Hex, GR B
3 NUT, 3/8-24 Hex, GR B
Pozycja: 32
3 WASHER, 1/4” Internal Tooth Lock used on All
3 WASHER, 1/4” Internal Tooth Lock used on All
Pozycja: 33
2 WASHER, 5/16” Internal/External Tooth Lock
2 WASHER, 5/16” Internal/External Tooth Lock
Pozycja: 33
1 NUT, 5/16-18 Hex GR5 or B continued on next page
1 NUT, 5/16-18 Hex GR5 or B continued on next page
Pozycja: 33
3 NUT, 1/4-20 Hex GR5 or B used on All
3 NUT, 1/4-20 Hex GR5 or B used on All
Pozycja: 34
2 WINGNUT, 5/16-18 Nyloc
2 WINGNUT, 5/16-18 Nyloc
Pozycja: 34
1 WASHER, 5/16” Split Lock
1 WASHER, 5/16” Split Lock
Pozycja: 34
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
Pozycja: 35
1 WASHER, 5/16” Flat
1 WASHER, 5/16” Flat
Pozycja: 35
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Pozycja: 35
4 BUSHING used on All
4 BUSHING used on All
Pozycja: 36
1 SPACER, 1/16” Thick, Blade Hub
1 SPACER, 1/16” Thick, Blade Hub
Pozycja: 36
1 CONNECTOR, Transfer Rod
1 CONNECTOR, Transfer Rod
Pozycja: 36
1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
Pozycja: 37
1 BAFFLE, Belt
1 BAFFLE, Belt
Pozycja: 37
1 WASHER, Flat 1/4" used on Self-Propelled Euro only
1 WASHER, Flat 1/4" used on Self-Propelled Euro only
Pozycja: 37
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
Pozycja: 38
3 PLUG, 5/16” Square Hole used on Push only
3 PLUG, 5/16” Square Hole used on Push only
Pozycja: 38
1 BUSHING
1 BUSHING
Pozycja: 38
1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
Pozycja: 39
3 PLUG, 5/16” Round Hole Qty 3 on Push; Qty 2 on Self-Propelled
3 PLUG, 5/16” Round Hole Qty 3 on Push; Qty 2 on Self-Propelled
Pozycja: 39
1 DISC, Driven (Cantilever)
1 DISC, Driven (Cantilever)
Pozycja: 39
1 GUIDE, Rope used on All
1 GUIDE, Rope used on All
Pozycja: 40
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Pozycja: 40
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
Pozycja: 40
1 FOAM GRIP, .84 I.D. x 11” long
1 FOAM GRIP, .84 I.D. x 11” long
Pozycja: 41
1 DECAL, Warning Chute/Deflector
1 DECAL, Warning Chute/Deflector
Pozycja: 41
1 RETAINER, 3/8” Bolt
1 RETAINER, 3/8” Bolt
Pozycja: 41
1 DECAL, Speed Select used on Self-Propelled (except Euro)
1 DECAL, Speed Select used on Self-Propelled (except Euro)
Pozycja: 42
1 SPRING, Wheel Drive
1 SPRING, Wheel Drive
Pozycja: 42
1 CLAMP, Casing used on All
1 CLAMP, Casing used on All
Pozycja: 43
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Pozycja: 43
4 WASHER, 5/16” Internal Tooth Lock used on All
4 WASHER, 5/16” Internal Tooth Lock used on All
Pozycja: 44
1 BRACKET, Deck
1 BRACKET, Deck
Pozycja: 44
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, used on All
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, used on All
Pozycja: 45
2 BUSHING, lange Plastic
2 BUSHING, lange Plastic
Pozycja: 45
1 GUIDE, Rope used on All
1 GUIDE, Rope used on All
Pozycja: 46
1 SPACER used on Commercial models
1 SPACER used on Commercial models
Pozycja: 46
1 LEVER, Speed Control used on Self-Propelled
1 LEVER, Speed Control used on Self-Propelled
Pozycja: 47
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
Pozycja: 47
1 GUIDE, Rope used on Self-Propelled
1 GUIDE, Rope used on Self-Propelled
Pozycja: 48
1 WASHER, 5/16” Internal Tooth Lock
1 WASHER, 5/16” Internal Tooth Lock
Pozycja: 48
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
Pozycja: 49
1 WASHER, Spring
1 WASHER, Spring
Pozycja: 49
1 CABLE-TIE, 7” used on Self-Propelled
1 CABLE-TIE, 7” used on Self-Propelled
Pozycja: 50
1 PIN, 3/32 x 1/2” Cotter
1 PIN, 3/32 x 1/2” Cotter
Pozycja: 50
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
Pozycja: 51
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Pozycja: 51
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
Pozycja: 52
1 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Pozycja: 52
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
Pozycja: 53
2 NUT, 5/16-18 Hex Flange Lock, GR5
2 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 53
1 CLAMP, 7/8” Double Cable used on Self-Propelled
1 CLAMP, 7/8” Double Cable used on Self-Propelled
Pozycja: 54
1 SPRING, Clutch
1 SPRING, Clutch
Pozycja: 54
1 GUIDE, Thrust Plate (3/8-24 thread)
1 GUIDE, Thrust Plate (3/8-24 thread)
Pozycja: 55
1 KIT, Drive Disc Assembly comprised of 73528 (disc), 91302 (nut),
1 KIT, Drive Disc Assembly comprised of 73528 (disc), 91302 (nut),
Pozycja: 56