Вибухова схема tondeuse snapper SNAPPER p215517hc-p216517b-p21657517bv-p21657517bve-p217017bv-p217017bve-rp215517hc-rp2167517bv-rp217017bv-rp2167517bve-rp217017bve-rp217017bve-rp217017bve-rp217017bve-wp2167517bv-wp216517bv-wrp216517be-frp2

Відкрийте повну вибухову схему tondeuse snapper SNAPPER p215517hc-p216517b-p21657517bv-p21657517bve-p217017bv-p217017bve-rp215517hc-rp2167517bv-rp217017bv-rp2167517bve-rp217017bve-rp217017bve-rp217017bve-rp217017bve-wp2167517bv-wp216517bv-wrp216517be-frp2 – незамінний посібник для ідентифікації запасних частин. Наш опис допоможе зрозуміти кожен компонент вашого tondeuse snapper. Швидко знаходьте деталі для tondeuse snapper SNAPPER p215517hc-p216517b-p21657517bv-p21657517bve-p217017bv-p217017bve-rp215517hc-rp2167517bv-rp217017bv-rp2167517bve-rp217017bve-rp217017bve-rp217017bve-rp217017bve-wp2167517bv-wp216517bv-wrp216517be-frp2.

Помічник з ремонту Powered by ChatGPT

Список запасних частин

1 HANDLE, Upper used on Push Models
1 HANDLE, Upper used on Push Models
Позиція: 1
1 DECK, 21” Mower (painted “HV” deck w/decals)
1 DECK, 21” Mower (painted “HV” deck w/decals)
Позиція: 1
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6)
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6)
Позиція: 1
2 BALL BEARING, 9/16” I.D.
2 BALL BEARING, 9/16” I.D.
Позиція: 1
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier
Позиція: 1
1 BELT, Poly-Vee
1 BELT, Poly-Vee
Позиція: 1
4 NUT, 5/16-24 Hex Lock, GR C
4 NUT, 5/16-24 Hex Lock, GR C
Позиція: 1
ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only
ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only
Позиція: 1
1 ASSEMBLY, Grass Bag (Includes 2 thru 4)
1 ASSEMBLY, Grass Bag (Includes 2 thru 4)
Позиція: 1
1 DECAL, Blade Control
1 DECAL, Blade Control
Позиція: 1
2 LATCH, Frame Attachment
2 LATCH, Frame Attachment
Позиція: 1
1 SCREEN, Fastener Assembly
1 SCREEN, Fastener Assembly
Позиція: 1
1 BATTERY, 12 Volt, 35 CCA
1 BATTERY, 12 Volt, 35 CCA
Позиція: 1
1 HANDLE, Middle- 1990 used on All
1 HANDLE, Middle- 1990 used on All
Позиція: 2
10 NUT, 5/16-18 Hex Flange Lock, GR5
10 NUT, 5/16-18 Hex Flange Lock, GR5
Позиція: 2
2 BOLT, 5/16-18 Hex Washer Face Shoulder
2 BOLT, 5/16-18 Hex Washer Face Shoulder
Позиція: 2
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
Позиція: 2
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later
Позиція: 2
1 LINK, Differential
1 LINK, Differential
Позиція: 2
1 WASHER, Cone
1 WASHER, Cone
Позиція: 2
1 ADAPTER, Grass Bag
1 ADAPTER, Grass Bag
Позиція: 2
1 DECAL, Speed Select used on Self-Propelled models
1 DECAL, Speed Select used on Self-Propelled models
Позиція: 2
1 RING, Bottom (21.77” Inside Diameter)
1 RING, Bottom (21.77” Inside Diameter)
Позиція: 2
1 HARNESS, Battery
1 HARNESS, Battery
Позиція: 2
1 HANDLE, Lower Left Hand used on All
1 HANDLE, Lower Left Hand used on All
Позиція: 3
10 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
10 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Позиція: 3
2 LATCH, Height
2 LATCH, Height
Позиція: 3
2 LATCH, Height Adjusting (Long)
2 LATCH, Height Adjusting (Long)
Позиція: 3
2 NUT, 7/16-20 Hex Center Lock Jam (thin)
2 NUT, 7/16-20 Hex Center Lock Jam (thin)
Позиція: 3
2 NUT, 7/16-20 Hex Center Lock Jam
2 NUT, 7/16-20 Hex Center Lock Jam
Позиція: 3
1 ARM, Clutch Idler
1 ARM, Clutch Idler
Позиція: 3
1 PULLEY, Poly-Vee Belt
1 PULLEY, Poly-Vee Belt
Позиція: 3
1 COVER, Bag Adapter
1 COVER, Bag Adapter
Позиція: 3
1 ASSEMBLY, Bag Wire (12” Wide)
1 ASSEMBLY, Bag Wire (12” Wide)
Позиція: 3
1 DECAL, Danger, Cut Finger
1 DECAL, Danger, Cut Finger
Позиція: 3
2 ROD, Tine
2 ROD, Tine
Позиція: 3
3 NUT, 5/16-24 Hex, GR5 only 1 shown
3 NUT, 5/16-24 Hex, GR5 only 1 shown
Позиція: 3
2 SCREW, #10-24 x 1/2” Pan Head Machine
2 SCREW, #10-24 x 1/2” Pan Head Machine
Позиція: 3
1 HANDLE, Lower Right Hand used on All
1 HANDLE, Lower Right Hand used on All
Позиція: 4
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
Позиція: 4
2 GRIP, Latch
2 GRIP, Latch
Позиція: 4
1 NUT, 1/4-20 Hex
1 NUT, 1/4-20 Hex
Позиція: 4
2 BUSHING, Axle
2 BUSHING, Axle
Позиція: 4
1 PULLEY, Idler
1 PULLEY, Idler
Позиція: 4
2 WASHER, Spring only 1 shown
2 WASHER, Spring only 1 shown
Позиція: 4
1 HINGE, Chute Cover
1 HINGE, Chute Cover
Позиція: 4
1 CONNECTOR, Grass Bag (weldment)
1 CONNECTOR, Grass Bag (weldment)
Позиція: 4
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Позиція: 4
1 SUPPORT, Wheel
1 SUPPORT, Wheel
Позиція: 4
3 WASHER, 5/16” Split Lock only 1 shown
3 WASHER, 5/16” Split Lock only 1 shown
Позиція: 4
2 NUT, #10-24 Square
2 NUT, #10-24 Square
Позиція: 4
1 BAIL, Blade Control used on All
1 BAIL, Blade Control used on All
Позиція: 5
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
Позиція: 5
6 NUT, 5/16-18 Hex Flange Lock, GR5
6 NUT, 5/16-18 Hex Flange Lock, GR5
Позиція: 5
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-
Позиція: 5
4 WASHER, 7/16 x 1” O.D. Flat
4 WASHER, 7/16 x 1” O.D. Flat
Позиція: 5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Позиція: 5
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10)
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10)
Позиція: 5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
Позиція: 5
1 ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE
1 ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE
Позиція: 5
1 DECAL, Noise (European)
1 DECAL, Noise (European)
Позиція: 5
1 TRAY, Tine
1 TRAY, Tine
Позиція: 5
3 SPRING only 1 shown
3 SPRING only 1 shown
Позиція: 5
1 KEY (Set of Two)
1 KEY (Set of Two)
Позиція: 5
1 CLIP, Blade Control used on 2002 Models & Earlier
1 CLIP, Blade Control used on 2002 Models & Earlier
Позиція: 6
2 PLUG, Hole
2 PLUG, Hole
Позиція: 6
2 RETAINER, 5/16” Bolt (Black)
2 RETAINER, 5/16” Bolt (Black)
Позиція: 6
1 ASSEMBLY, Wheel Arm, Right Rear (Round used on Push models (Incl. items 3, 10, 14,
1 ASSEMBLY, Wheel Arm, Right Rear (Round used on Push models (Incl. items 3, 10, 14,
Позиція: 6
2 PLUG, Wheel
2 PLUG, Wheel
Позиція: 6
1 NUT, 1/4-28 Hex Top Lock
1 NUT, 1/4-28 Hex Top Lock
Позиція: 6
1 HOUSING, Right Side
1 HOUSING, Right Side
Позиція: 6
5 WASHER, 1/4” Internal Tooth Lock
5 WASHER, 1/4” Internal Tooth Lock
Позиція: 6
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
Позиція: 6
1 DECAL, 2001 Year of Manufacture not shown
1 DECAL, 2001 Year of Manufacture not shown
Позиція: 6
6 KIT, Tine Thatching Spring
6 KIT, Tine Thatching Spring
Позиція: 6
1 BEZEL (Seal & Face Nut)
1 BEZEL (Seal & Face Nut)
Позиція: 6
1 CABLE, Blade Control (49-1/4” long) used on 2002 Models & Earlier
1 CABLE, Blade Control (49-1/4” long) used on 2002 Models & Earlier
Позиція: 7
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
Позиція: 7
2 NUT, 5/16-18 Hex Flange Lock
2 NUT, 5/16-18 Hex Flange Lock
Позиція: 7
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14,
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14,
Позиція: 7
2 BUSHING, 3/8” Plastic
2 BUSHING, 3/8” Plastic
Позиція: 7
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
Позиція: 7
5 NUT, 1/4-20 Hex
5 NUT, 1/4-20 Hex
Позиція: 7
1 ADAPTER, Bag
1 ADAPTER, Bag
Позиція: 7
1 DECAL, Patent Numbers
1 DECAL, Patent Numbers
Позиція: 7
1 BUSHING, Wheel Adjuster
1 BUSHING, Wheel Adjuster
Позиція: 7
1 BRACKET, Ignition Switch
1 BRACKET, Ignition Switch
Позиція: 7
1 HANDLE, Wheel Drive used on Self-Propelled
1 HANDLE, Wheel Drive used on Self-Propelled
Позиція: 8
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
Позиція: 8
1 WELDMENT, Front Wheel Bracket used on 2002 Model Year and Earlier
1 WELDMENT, Front Wheel Bracket used on 2002 Model Year and Earlier
Позиція: 8
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models (Incl. items 1,
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models (Incl. items 1,
Позиція: 8
1 SHAFT, Hex Drive
1 SHAFT, Hex Drive
Позиція: 8
2 SEAL, 5/8” Internal Dia.
2 SEAL, 5/8” Internal Dia.
Позиція: 8
1 STOP, Cover
1 STOP, Cover
Позиція: 8
1 BRACKET, Rope Pulley
1 BRACKET, Rope Pulley
Позиція: 8
1 DECAL, Warning (Euro)
1 DECAL, Warning (Euro)
Позиція: 8
1 AXLE, Wheel
1 AXLE, Wheel
Позиція: 8
1 COVER, Switch
1 COVER, Switch
Позиція: 8
1 GRIP, Wheel Drive Handle used on Self-Propelled
1 GRIP, Wheel Drive Handle used on Self-Propelled
Позиція: 9
1 BUSHING used on Euro models
1 BUSHING used on Euro models
Позиція: 9
1 AXLE
1 AXLE
Позиція: 9
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models (Incl. items 1,
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models (Incl. items 1,
Позиція: 9
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
Позиція: 9
2 BEARING, Tapered- (Differential Housing)
2 BEARING, Tapered- (Differential Housing)
Позиція: 9
1 MOLDING, Trim
1 MOLDING, Trim
Позиція: 9
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
Позиція: 9
1 DECAL, Warning
1 DECAL, Warning
Позиція: 9
1 WHEEL, 7.00 x 1.50 Gage
1 WHEEL, 7.00 x 1.50 Gage
Позиція: 9
1 NUT, 5/8-32 Hex Lock
1 NUT, 5/8-32 Hex Lock
Позиція: 9
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
Позиція: 10
1 COVER, Belt used on Euro models
1 COVER, Belt used on Euro models
Позиція: 10
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
Позиція: 10
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Позиція: 10
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375
Позиція: 10
1 BUSHING, Flange
1 BUSHING, Flange
Позиція: 10
1 DECAL, Euro Community (CE)
1 DECAL, Euro Community (CE)
Позиція: 10
10 NUT, 1/4-20 Hex Top Lock only 9 shown
10 NUT, 1/4-20 Hex Top Lock only 9 shown
Позиція: 10
1 SWITCH, Ignition (spring loaded ON/OFF
1 SWITCH, Ignition (spring loaded ON/OFF
Позиція: 10
1 COVER, Vinyl used on Self-Propelled
1 COVER, Vinyl used on Self-Propelled
Позиція: 11
2 WASHER, 7/16” Flat used on Euro models
2 WASHER, 7/16” Flat used on Euro models
Позиція: 11
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
Позиція: 11
1 SPRING, Torsion
1 SPRING, Torsion
Позиція: 11
1 PLUG, Housing
1 PLUG, Housing
Позиція: 11
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
Позиція: 11
1 PULLEY, Plastic
1 PULLEY, Plastic
Позиція: 11
1 DECAL, Deck/Chute (European)
1 DECAL, Deck/Chute (European)
Позиція: 11
4 WASHER, 1/4” Flat
4 WASHER, 1/4” Flat
Позиція: 11
1 SPACER
1 SPACER
Позиція: 11
1 SPRING, Clutch used on Self-Propelled
1 SPRING, Clutch used on Self-Propelled
Позиція: 12
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
Позиція: 12
1 ARM, Wheel, Right Rear used on Self-Propelled models
1 ARM, Wheel, Right Rear used on Self-Propelled models
Позиція: 12
1 STUD, Idler (3/8-24 thread)
1 STUD, Idler (3/8-24 thread)
Позиція: 12
1 GEAR, Input
1 GEAR, Input
Позиція: 12
1 NUT, 5/16-18 Hex Large Flange Center Lock
1 NUT, 5/16-18 Hex Large Flange Center Lock
Позиція: 12
1 NUT, 5/16-18 Hex Flange Lock GR5
1 NUT, 5/16-18 Hex Flange Lock GR5
Позиція: 12
1 DECAL, Deck Warning
1 DECAL, Deck Warning
Позиція: 12
2 SPRING, Compression
2 SPRING, Compression
Позиція: 12
2 WASHER, 1/4” Internal Tooth Lock
2 WASHER, 1/4” Internal Tooth Lock
Позиція: 12
1 SECTOR, Speed used on all other Self-Propelled models
1 SECTOR, Speed used on all other Self-Propelled models
Позиція: 13
2 WASHER, 3/8” I.D. Cone
2 WASHER, 3/8” I.D. Cone
Позиція: 13
1 ARM, Wheel, Left Rear used on Self-Propelled models
1 ARM, Wheel, Left Rear used on Self-Propelled models
Позиція: 13
1 HOLDER, Bearing (Inner Half)
1 HOLDER, Bearing (Inner Half)
Позиція: 13
1 AXLE, Short
1 AXLE, Short
Позиція: 13
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Позиція: 13
4 WASHER, 15/32” Flat
4 WASHER, 15/32” Flat
Позиція: 13
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
Позиція: 13
2 NUT, 1/4-28 Hex, GR5 or B
2 NUT, 1/4-28 Hex, GR5 or B
Позиція: 13
3 WIRE TIE, 1.29” Long (Black) used on Self-Propelled
3 WIRE TIE, 1.29” Long (Black) used on Self-Propelled
Позиція: 14
1 BLADE, Cutter (European) used on Euro models
1 BLADE, Cutter (European) used on Euro models
Позиція: 14
2 BOLT, 5/16-18 x 1” Shoulder
2 BOLT, 5/16-18 x 1” Shoulder
Позиція: 14
1 BEARING, Ball, .38 I.D. Spherical O.D.
1 BEARING, Ball, .38 I.D. Spherical O.D.
Позиція: 14
1 GEAR, Differential (46 tooth)
1 GEAR, Differential (46 tooth)
Позиція: 14
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Позиція: 14
4 RIVET
4 RIVET
Позиція: 14
1 DECAL, Front Baffle used on “FRP” & “EFRP” Air Models only
1 DECAL, Front Baffle used on “FRP” & “EFRP” Air Models only
Позиція: 14
2 NUT, 1/4-20 Hex, GR5
2 NUT, 1/4-20 Hex, GR5
Позиція: 14
1 HARNESS, Wiring
1 HARNESS, Wiring
Позиція: 14
1 SPRING, Speed Control used on Self-Propelled
1 SPRING, Speed Control used on Self-Propelled
Позиція: 15
1 HUB, Blade Drive 25mm used on Briggs Models
1 HUB, Blade Drive 25mm used on Briggs Models
Позиція: 15
2 RETAINER, 5/16” Bolt
2 RETAINER, 5/16” Bolt
Позиція: 15
1 O-RING
1 O-RING
Позиція: 15
2 PLATE, 46T Gear
2 PLATE, 46T Gear
Позиція: 15
1 CHUTE, Side
1 CHUTE, Side
Позиція: 15
1 PLUG, Chute Adapter
1 PLUG, Chute Adapter
Позиція: 15
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Позиція: 15
2 CAP, Vinyl
2 CAP, Vinyl
Позиція: 15
1 BRACKET, Battery
1 BRACKET, Battery
Позиція: 15
1 WASHER, 3/8” Flat used on Self-Propelled
1 WASHER, 3/8” Flat used on Self-Propelled
Позиція: 16
1 KEY, Woodruff # 605 used on Briggs Models
1 KEY, Woodruff # 605 used on Briggs Models
Позиція: 16
1 NUT, 3/8-24 Hex Center Lock GR5 or B
1 NUT, 3/8-24 Hex Center Lock GR5 or B
Позиція: 16
2 WASHER, Thrust, 3/4” I.D.
2 WASHER, Thrust, 3/4” I.D.
Позиція: 16
2 WASHER, 5/16” Flat
2 WASHER, 5/16” Flat
Позиція: 16
1 DECAL, Medallion
1 DECAL, Medallion
Позиція: 16
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
Позиція: 16
1 COVER, Battery
1 COVER, Battery
Позиція: 16
1 GRIP, Speed Control Handle used on all other Self-Propelled models
1 GRIP, Speed Control Handle used on all other Self-Propelled models
Позиція: 17
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
Позиція: 17
1 BRACKET, Right Rear Wheel
1 BRACKET, Right Rear Wheel
Позиція: 17
1 HOLDER, Bearing (Outer Half)
1 HOLDER, Bearing (Outer Half)
Позиція: 17
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
Позиція: 17
2 WING-NUT, 5/16-18 Nyloc
2 WING-NUT, 5/16-18 Nyloc
Позиція: 17
1 DECAL, OPEI
1 DECAL, OPEI
Позиція: 17
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
Позиція: 17
1 ANCHOR, Speed Control used on all other Self-Propelled models
1 ANCHOR, Speed Control used on all other Self-Propelled models
Позиція: 18
1 PULLEY, Engine (25mm I.D. x 2-1/8” O.D.) used on Briggs Models
1 PULLEY, Engine (25mm I.D. x 2-1/8” O.D.) used on Briggs Models
Позиція: 18
1 BRACKET, Left Rear Wheel
1 BRACKET, Left Rear Wheel
Позиція: 18
1 CLIP, 1/4” Right Arc (Transfer Rod)
1 CLIP, 1/4” Right Arc (Transfer Rod)
Позиція: 18
1 GASKET, Housing
1 GASKET, Housing
Позиція: 18
1 COVER, 21” Deck
1 COVER, 21” Deck
Позиція: 18
1 DECAL, SNAPPER (Commercial) gold letters/red border/black background
1 DECAL, SNAPPER (Commercial) gold letters/red border/black background
Позиція: 18
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
Позиція: 18
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Позиція: 18
1 GUIDE, Lower V-Belt used on Self-Propelled
1 GUIDE, Lower V-Belt used on Self-Propelled
Позиція: 19
1 WASHER, 7/16” Flat
1 WASHER, 7/16” Flat
Позиція: 19
1 AXLE Rear axle on Push Models; Front axle on All
1 AXLE Rear axle on Push Models; Front axle on All
Позиція: 19
1 ROD, Transfer used on Non-Euro models
1 ROD, Transfer used on Non-Euro models
Позиція: 19
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
Позиція: 19
2 NUT, 5/16-18 Hex Large Flange Center Lock
2 NUT, 5/16-18 Hex Large Flange Center Lock
Позиція: 19
1 DECAL, Shift Warning used on Self-Propelled models
1 DECAL, Shift Warning used on Self-Propelled models
Позиція: 19
6 WASHER, Reinforcing only 1 shown
6 WASHER, Reinforcing only 1 shown
Позиція: 19
1 CLIP, Wiring
1 CLIP, Wiring
Позиція: 19
1 ROD, Transfer used on Self-Propelled
1 ROD, Transfer used on Self-Propelled
Позиція: 20
1 WELDMENT, Fender used on Euro models
1 WELDMENT, Fender used on Euro models
Позиція: 20
1 GUARD, Rear Foot used on Push models
1 GUARD, Rear Foot used on Push models
Позиція: 20
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
Позиція: 20
1 BRACKET, Differential
1 BRACKET, Differential
Позиція: 20
1 DECAL, Caution Tag not used in 2003 model year
1 DECAL, Caution Tag not used in 2003 model year
Позиція: 20
6 WASHER, 5/16” Split Lock only 1 shown
6 WASHER, 5/16” Split Lock only 1 shown
Позиція: 20
1 CHARGER, Battery (120 Volt; 60 Hertz)
1 CHARGER, Battery (120 Volt; 60 Hertz)
Позиція: 20
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
Позиція: 21
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 (only one shown)
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 (only one shown)
Позиція: 21
1 GUARD, Rear Foot used on Self-Propelled models (except
1 GUARD, Rear Foot used on Self-Propelled models (except
Позиція: 21
1 PLATE, Thrust
1 PLATE, Thrust
Позиція: 21
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
Позиція: 21
1 DECAL, Ninja
1 DECAL, Ninja
Позиція: 21
6 NUT, 5/16-18 Hex, GR5 only 1 shown
6 NUT, 5/16-18 Hex, GR5 only 1 shown
Позиція: 21
1 TEE-NUT, 5/16-18 used on Self-Propelled
1 TEE-NUT, 5/16-18 used on Self-Propelled
Позиція: 22
2 RETAINER, 5/16” Bolt (only one shown)
2 RETAINER, 5/16” Bolt (only one shown)
Позиція: 22
1 RING, Split (Black) used on Self-Propelled models
1 RING, Split (Black) used on Self-Propelled models
Позиція: 22
2 RING, 5/8” External Retaining used on Self-Propelled
2 RING, 5/8” External Retaining used on Self-Propelled
Позиція: 22
1 SPACER, Axle Gear
1 SPACER, Axle Gear
Позиція: 22
1 DECAL, Hi-Vac
1 DECAL, Hi-Vac
Позиція: 22
2 NUT, 1/2” Push
2 NUT, 1/2” Push
Позиція: 22
1 BUSHING, Differential used on Self-Propelled
1 BUSHING, Differential used on Self-Propelled
Позиція: 23
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Позиція: 23
1 SUPPORT, Foot Guard used on Self-Propelled models
1 SUPPORT, Foot Guard used on Self-Propelled models
Позиція: 23
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
Позиція: 23
1 AXLE, Long
1 AXLE, Long
Позиція: 23
4 BEARING, Nyliner
4 BEARING, Nyliner
Позиція: 23
2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Позиція: 23
1 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
1 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
Позиція: 24
2 LIFT, Air
2 LIFT, Air
Позиція: 24
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
Позиція: 24
4 SCREW, #10-32 x 1/4” Self-Tap Machine
4 SCREW, #10-32 x 1/4” Self-Tap Machine
Позиція: 24
4 GEAR, Pinion (12 tooth)
4 GEAR, Pinion (12 tooth)
Позиція: 24
1 SCREW, 5/16-18 x 1/4” Set
1 SCREW, 5/16-18 x 1/4” Set
Позиція: 24
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
Позиція: 25
4 WASHER, 5/16” Internal Tooth Lock
4 WASHER, 5/16” Internal Tooth Lock
Позиція: 25
1 WASHER, 1/4” Internal Tooth Lock
1 WASHER, 1/4” Internal Tooth Lock
Позиція: 25
1 SHIELD, Hex Shaft used on Self-Propelled Euro only
1 SHIELD, Hex Shaft used on Self-Propelled Euro only
Позиція: 25
4 SPACER, Pinion Gear
4 SPACER, Pinion Gear
Позиція: 25
2 WASHER, 1/2” Flat
2 WASHER, 1/2” Flat
Позиція: 25
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 used on All
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 used on All
Позиція: 26
4 NUT, 5/16-24 Hex, GR5
4 NUT, 5/16-24 Hex, GR5
Позиція: 26
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Позиція: 26
1 BALL JOINT, 1/4-28 used on Self-Propelled Euro only
1 BALL JOINT, 1/4-28 used on Self-Propelled Euro only
Позиція: 26
4 SHAFT, Pinion
4 SHAFT, Pinion
Позиція: 26
1 DECAL, Adjustment
1 DECAL, Adjustment
Позиція: 26
10 NUT, 5/16-18 Hex Flange Lock GR5 used on All
10 NUT, 5/16-18 Hex Flange Lock GR5 used on All
Позиція: 27
4 SCREW, 5/16-24 x 21/32” Machine
4 SCREW, 5/16-24 x 21/32” Machine
Позиція: 27
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only
Позиція: 27
4 NUT, #10-32 Hex Nyloc only 1 shown
4 NUT, #10-32 Hex Nyloc only 1 shown
Позиція: 27
1 DECAL, Thatcherizer
1 DECAL, Thatcherizer
Позиція: 27
1 NUT, 5/16-24 Hex Center Lock GR5 used on All
1 NUT, 5/16-24 Hex Center Lock GR5 used on All
Позиція: 28
2 NUT, 5/16-18 Hex Center Lock
2 NUT, 5/16-18 Hex Center Lock
Позиція: 28
1 LINK, Transfer used on Self-Propelled Euro only
1 LINK, Transfer used on Self-Propelled Euro only
Позиція: 28
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
Позиція: 28
1 CLIP, Cable/Wiring used on All
1 CLIP, Cable/Wiring used on All
Позиція: 29
1 DECAL, Front Baffle
1 DECAL, Front Baffle
Позиція: 29
1 WASHER, 3/4” Shim
1 WASHER, 3/4” Shim
Позиція: 29
1 HOUSING, Left
1 HOUSING, Left
Позиція: 29
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 used on All
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 used on All
Позиція: 30
1 BAFFLE, Front used on “FRP” & “EFRP” Air Models only
1 BAFFLE, Front used on “FRP” & “EFRP” Air Models only
Позиція: 30
3 WASHER, 3/8” Internal Tooth Lock
3 WASHER, 3/8” Internal Tooth Lock
Позиція: 30
3 GASKET, 5/8” O. D.
3 GASKET, 5/8” O. D.
Позиція: 30
4 T-KNOB, 5/16-18 (BLACK) used on All
4 T-KNOB, 5/16-18 (BLACK) used on All
Позиція: 31
1 DECAL, Front Baffle
1 DECAL, Front Baffle
Позиція: 31
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Позиція: 31
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
Позиція: 32
2 BOLT, 5/16-18 x 3/4” Carriage, GR5
2 BOLT, 5/16-18 x 3/4” Carriage, GR5
Позиція: 32
3 NUT, 3/8-24 Hex, GR B
3 NUT, 3/8-24 Hex, GR B
Позиція: 32
3 WASHER, 1/4” Internal Tooth Lock used on All
3 WASHER, 1/4” Internal Tooth Lock used on All
Позиція: 33
2 WASHER, 5/16” Internal/External Tooth Lock
2 WASHER, 5/16” Internal/External Tooth Lock
Позиція: 33
1 NUT, 5/16-18 Hex GR5 or B continued on next page
1 NUT, 5/16-18 Hex GR5 or B continued on next page
Позиція: 33
3 NUT, 1/4-20 Hex GR5 or B used on All
3 NUT, 1/4-20 Hex GR5 or B used on All
Позиція: 34
2 WINGNUT, 5/16-18 Nyloc
2 WINGNUT, 5/16-18 Nyloc
Позиція: 34
1 WASHER, 5/16” Split Lock
1 WASHER, 5/16” Split Lock
Позиція: 34
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
Позиція: 35
1 WASHER, 5/16” Flat
1 WASHER, 5/16” Flat
Позиція: 35
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Позиція: 35
4 BUSHING used on All
4 BUSHING used on All
Позиція: 36
1 SPACER, 1/16” Thick, Blade Hub
1 SPACER, 1/16” Thick, Blade Hub
Позиція: 36
1 CONNECTOR, Transfer Rod
1 CONNECTOR, Transfer Rod
Позиція: 36
1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
Позиція: 37
1 BAFFLE, Belt
1 BAFFLE, Belt
Позиція: 37
1 WASHER, Flat 1/4" used on Self-Propelled Euro only
1 WASHER, Flat 1/4" used on Self-Propelled Euro only
Позиція: 37
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
Позиція: 38
3 PLUG, 5/16” Square Hole used on Push only
3 PLUG, 5/16” Square Hole used on Push only
Позиція: 38
1 BUSHING
1 BUSHING
Позиція: 38
1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
Позиція: 39
3 PLUG, 5/16” Round Hole Qty 3 on Push; Qty 2 on Self-Propelled
3 PLUG, 5/16” Round Hole Qty 3 on Push; Qty 2 on Self-Propelled
Позиція: 39
1 DISC, Driven (Cantilever)
1 DISC, Driven (Cantilever)
Позиція: 39
1 GUIDE, Rope used on All
1 GUIDE, Rope used on All
Позиція: 40
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Позиція: 40
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
Позиція: 40
1 FOAM GRIP, .84 I.D. x 11” long
1 FOAM GRIP, .84 I.D. x 11” long
Позиція: 41
1 DECAL, Warning Chute/Deflector
1 DECAL, Warning Chute/Deflector
Позиція: 41
1 RETAINER, 3/8” Bolt
1 RETAINER, 3/8” Bolt
Позиція: 41
1 DECAL, Speed Select used on Self-Propelled (except Euro)
1 DECAL, Speed Select used on Self-Propelled (except Euro)
Позиція: 42
1 SPRING, Wheel Drive
1 SPRING, Wheel Drive
Позиція: 42
1 CLAMP, Casing used on All
1 CLAMP, Casing used on All
Позиція: 43
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Позиція: 43
4 WASHER, 5/16” Internal Tooth Lock used on All
4 WASHER, 5/16” Internal Tooth Lock used on All
Позиція: 44
1 BRACKET, Deck
1 BRACKET, Deck
Позиція: 44
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, used on All
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, used on All
Позиція: 45
2 BUSHING, lange Plastic
2 BUSHING, lange Plastic
Позиція: 45
1 GUIDE, Rope used on All
1 GUIDE, Rope used on All
Позиція: 46
1 SPACER used on Commercial models
1 SPACER used on Commercial models
Позиція: 46
1 LEVER, Speed Control used on Self-Propelled
1 LEVER, Speed Control used on Self-Propelled
Позиція: 47
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
Позиція: 47
1 GUIDE, Rope used on Self-Propelled
1 GUIDE, Rope used on Self-Propelled
Позиція: 48
1 WASHER, 5/16” Internal Tooth Lock
1 WASHER, 5/16” Internal Tooth Lock
Позиція: 48
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
Позиція: 49
1 WASHER, Spring
1 WASHER, Spring
Позиція: 49
1 CABLE-TIE, 7” used on Self-Propelled
1 CABLE-TIE, 7” used on Self-Propelled
Позиція: 50
1 PIN, 3/32 x 1/2” Cotter
1 PIN, 3/32 x 1/2” Cotter
Позиція: 50
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
Позиція: 51
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Позиція: 51
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
Позиція: 52
1 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Позиція: 52
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
Позиція: 53
2 NUT, 5/16-18 Hex Flange Lock, GR5
2 NUT, 5/16-18 Hex Flange Lock, GR5
Позиція: 53
1 CLAMP, 7/8” Double Cable used on Self-Propelled
1 CLAMP, 7/8” Double Cable used on Self-Propelled
Позиція: 54
1 SPRING, Clutch
1 SPRING, Clutch
Позиція: 54
1 GUIDE, Thrust Plate (3/8-24 thread)
1 GUIDE, Thrust Plate (3/8-24 thread)
Позиція: 55
1 KIT, Drive Disc Assembly comprised of 73528 (disc), 91302 (nut),
1 KIT, Drive Disc Assembly comprised of 73528 (disc), 91302 (nut),
Позиція: 56