Vue éclatée broadmoor 20 Simplicity broadmoor-20
Découvrez la vue éclatée complète broadmoor 20 Simplicity broadmoor-20, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre broadmoor 20. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre broadmoor 20 Simplicity broadmoor-20 et éviter les pannes imprévues.
Assistant réparation
Powered by ChatGPT
Liste des pièces détachées
7 NUT, Hex Flange Lock, 3/8-16
Position : 1
1 STEERING WHEEL, Straight, Shaft
Position : 1
1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings
Position : 1
1 MUFFLER
Position : 1
2 SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4, Black
Position : 1
1 ROD, Brake Lock
Position : 1
1 DECAL, Cruise & Lift
Position : 1
1 HEADLIGHT ASSEMBLY, 4 Bulb, (Includes Ref. Nos. 2 & 3)
Position : 1
1 GRIP, Black Vinyl
Position : 1
2 WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5, & 6)
Position : 1
1 DECAL, ICON Simplicity, Orange
Position : 1
1 DECAL, Ignition Switch Symbols, White/Black
Position : 1
1 V-BELT
Position : 1
2 NUT, Hex Flange Lock, 1/2-13
Position : 1
1 DEFLECTOR, Plastic
Position : 1
1 NUT, Hex Lock Esna Light, 3/8-16
Position : 1
1 ROD
Position : 1
1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8
Position : 1
1 V-BELT, Mower Drive
Position : 1
1 SHAFT & BAR ASSEMBLY, 44" (Includes Ref. No. 9)
Position : 1
3 NUT, Hex Flange, 9/16-18
Position : 1
1 V-BELT, Mower Drive
Position : 1
1 SHAFT ASSEMBLY, Roller, 50", (Includes Ref. No. 10)
Position : 1
2 WASHER
Position : 2
1 CAP, Steering Wheel, SMI Logo
Position : 2
1 CAP, Steering Wheel, Plain
Position : 2
1 PAD, Footrest, LH, without Differential Lock
Position : 2
1 HOUSING ASSEMBLY, UPPER
Position : 2
1 KNOB, Push On, Red Plastic "P"
Position : 2
1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8
Position : 2
4 BULB, Headlight, 12.8V
Position : 2
1 * SEAT, 18" Back, Optional
Position : 2
1 * SEAT, 15" Back, Standard
Position : 2
1 TIRE, 15 x 6, Super Turf
Position : 2
3 DECAL, Simplicity, Silver & Blue w/Icon
Position : 2
1 DECAL, Automatic Control Traction
Position : 2
2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4
Position : 2
1 SHAFT & BAR ASSEMBLY (Includes Ref. No. 13)
Position : 2
1 NUT, Push
Position : 2
6 WASHER, 3/8
Position : 2
8 WASHER, 3/8
Position : 2
1 WASHER, 7/16
Position : 2
1 V-BELT, Arbor Drive
Position : 2
1 NUT, Adjuster
Position : 2
6 WASHER, Bellevilled, 9/16
Position : 2
1 V-BELT, Arbor Drive
Position : 2
1 NUT, Hex Flange, 5/8-11
Position : 3
1 PIN, Spring, 5/16 x 2-1/2
Position : 3
1 SEAL, Circle, 16HP Only
Position : 3
1 SEAL, Circle, 18HP Only
Position : 3
1 SEAL, Circle, 18HP & 20HP
Position : 3
1 PAD, Footrest, RH
Position : 3
1 HOUSING, LOWER
Position : 3
1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4
Position : 3
1 KNOB, Cruise
Position : 3
4 SOCKET ASSEMBLY, Headlight, Sealed
Position : 3
1 NUT, Hex Flange Lock, 3/8-16
Position : 3
1 TUBE, Tire, Front, 4.10/3.50
Position : 3
1 DECAL, Broadmoor, Silver & Blue
Position : 3
DECAL, 18HP
Position : 3
1 DECAL, 20HP
Position : 3
8 WASHER, Plain, 1-1/4
Position : 3
2 WASHER, Plain
Position : 3
1 PULLEY, Idler
Position : 3
1 CAPSCREW, Hex Head, 3/8-16 x 1 3/4
Position : 3
3 WASHER, Spring
Position : 3
1 PULLEY, 4-1/2 O.D.
Position : 3
1 PULLEY
Position : 3
3 NUT, Hex Aluminum Insert Lock, 3/8-16
Position : 3
1 COVER, Rubber, Upper Steering Shaft
Position : 4
1 NUT, Hex KEPS, 5/16-18, Black
Position : 4
2 WASHER, 5/16, Black
Position : 4
1 HARNESS, Headlight
Position : 4
12 CAPSCREW, Hex Head Flange Lock,1/4-20 x 5/8
Position : 4
1 CLIP, Wire
Position : 4
1 WASHER
Position : 4
2 BEARING, Ball
Position : 4
1 DECAL, Hood Stripe, RH, Simplicity, Blue & Silver
Position : 4
1 DECAL, Hood Stripe, LH, Simplicity, Blue & Silver
Position : 4
1 DECAL, Tunnel Cover, Danger Slopes/Blades
Position : 4
1 DECAL, Tunnel Cover, Danger Slopes/Blades, (Export)
Position : 4
4 WASHER, Plain, 3/8
Position : 4
6 ROLLER
Position : 4
1 CLAMP
Position : 4
1 V-BELT, Arbor Drive
Position : 4
1 NUT, Hex Jam, 3/8-16
Position : 4
1 NUT, Hex Flange, 9/16-18
Position : 4
2 NUT, Hex, 3/8-16
Position : 4
1 HUB, Double Pulley
Position : 4
5 WASHER, 3/4
Position : 5
2 CAPSCREW, Hex Washer Head Taptite, 1/2-20 x 1/2, Black
Position : 5
1 HOSE, Oil Drain
Position : 5
15 FASTENER, Panel
Position : 5
1 ROD, Brake
Position : 5
1 LEVER & BRACKET ASSEMBLY, Cruise
Position : 5
1 SWITCH, PTO Push/Pull Symbols
Position : 5
1 SCREW, Phillips Head, #10-24 x 1/2
Position : 5
1 WHEEL, 4-1/2" x 6"
Position : 5
1 DECAL, AGCO, Logo Black, Chrome, Orange
Position : 5
1 DECAL, Drive Belts, Mower Blades
Position : 5
1 SPACER
Position : 5
2 SPACER
Position : 5
2 LOCKWASHER, 1/4
Position : 5
1 NUT, Hex Flange, 3/8-16 Black
Position : 5
1 PULLEY
Position : 5
2 WASHER, Lock, 3/8
Position : 5
3 PULLEY, 4-1/4 O.D.
Position : 5
3 PULLEY
Position : 5
4 CAPSCREW, Hex Head Taptite, 3/8-16 x 3/4
Position : 6
2 BUSHING, 15/32 x 7/8 x 7/8, Nylon
Position : 6
1 CONTROL, Throttle Double 39" Long w/Knobs
Position : 6
6 NUT, Hex KEPS, 3/8-16, Black
Position : 6
2 CARRIAGE BOLT, 3/8-16 x 1 3/4
Position : 6
2 WASHER, 3/8, Black
Position : 6
1 MODULE, RMO (Includes Ref. No. 7)
Position : 6
1 DASHBOARD, RMO, Black
Position : 6
1 DASHBOARD, RMO with Hydra Lift Slot, Black
Position : 6
2 SPRING, Compression
Position : 6
1 SPRING, Compression
Position : 6
4 VALVE STEM & CAP ASSEMBLY
Position : 6
1 DECAL, 1620, White, AGCO
Position : 6
2 DECAL, Protective Sticker
Position : 6
1 PULLEY (Includes Ref. No. 5)
Position : 6
2 NUT, Hex, 1/4-20
Position : 6
2 WASHER, 3/8
Position : 6
1 ROD & WASHER ASSEMBLY, Adjust Handle
Position : 6
1 HUB
Position : 6
1 HUB, Double Pulley
Position : 6
2 NUT, Hex KEPS 5/6-18
Position : 7
2 TIE, Wire, 7-5/16" Long
Position : 7
1 SEAL, Circle
Position : 7
6 CARRIAGE BOLT, 3/8-16 x 1, Black
Position : 7
1 VENT VALVE
Position : 7
2 BUSHING, 5/8 x 3/4 x 3/4, Nylon
Position : 7
1 CARRIAGE BOLT, 5/16-18 x 3/4
Position : 7
1 KEY, RMO Module Plastic
Position : 7
1 NUT, Hex Nylock,#10-24
Position : 7
10 NUT, Hex Lock, ESNA Light 5/16-18
Position : 7
1 NUT, Push, 3/8
Position : 7
1 DECAL, Hood Stripe, RH, AGCO
Position : 7
1 DECAL, Hood Stripe, LH, AGCO
Position : 7
1 GRIP, Lever
Position : 7
2 NUT, Adjuster
Position : 7
1 ARM ASSEMBLY, Idler with Bushings & Fitting, 38 Tooth
Position : 7
1 GRIP, Black Vinyl For Rod
Position : 7
2 SPROCKET & FLANGE ASSEMBLY, Riveted, 38 Tooth
Position : 7
14 WASHER, 3/8
Position : 7
2 SPACER, 25/64 x 13/16 x 13/16, Steel, Black
Position : 7
8 WASHER, Plain, 1 1/4
Position : 7
2 TIE, Self Locking
Position : 7
4 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4
Position : 8
2 CLAMP, Hose Type E
Position : 8
5 NUT, Hex Flange ESNA, 5/16-18, Black
Position : 8
2 MAGNET, K50
Position : 8
1 FITTING, Lube, 1/4
Position : 8
2 WASHER, 9/16 x 1-1/4 x 1/8
Position : 8
2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2, Black
Position : 8
1 ROD, Dash Support
Position : 8
2 SPRING, Compression
Position : 8
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position : 8
4 WASHER, 1, (As Required for All Front)
Position : 8
1 DECAL, Massey Ferguson Logo, 3 Triangles
Position : 8
1 CLUTCH LEVER ASSEMBLY (Includes Ref. Nos. 9 & 16)
Position : 8
2 LOCKWASHER, 3/8
Position : 8
1 SPRING, Torsion
Position : 8
1 CARRIAGE BOLT, 3/8-16 x
Position : 8
1 ROD, Latch
Position : 8
2 SPACER, 25/64 x 21/32 x 7/16, Powder Metal
Position : 8
2 ROLLER, Rounded, 2-1/2 Long
Position : 8
3 BEARING, Ball, 3/4 x 1-3/4 x 5/8
Position : 8
1 HUB, 25/64 x 3/4 x 63/64, Powder Metal
Position : 8
3 SPACER, 21/32 x 5/32 x 5/8
Position : 8
2 NUT, Push
Position : 9
1 HOSE, Fuel, 59" Long
Position : 9
2 CAPSCREW, Hex Head Taptite, 1/4-20 x 1/2
Position : 9
1 HOLDER, MAGNET
Position : 9
1 SPRING, Extension
Position : 9
1 SPACER, w/Flange, 11/32 x 15/32 x 3/4
Position : 9
1 BREAKER, Circuit, 12 Volt 20 Amps
Position : 9
12 NUT, Hex Flange Lock, 1/4-20
Position : 9
8 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4
Position : 9
1 PLUG, Lift Cover (Models without Cruise Control)
Position : 9
2 RING, Retaining, External #98
Position : 9
1 DECAL, 2618, Black, Massey Ferguson
Position : 9
2 DECAL, 2620, Black, Massey Ferguson
Position : 9
1 DECAL, Touch Up Paint (Orange)
Position : 9
1 DECAL, Touch Up Paint (Red)
Position : 9
1 FITTING, Grease
Position : 9
1 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G8
Position : 9
1 LATCH, 5/16 WIRE
Position : 9
2 PULLEY, Idler, (Includes Ref. No. 8)
Position : 9
2 NUT, Push
Position : 9
3 SPACER, 21/32 x 3/4 x 5/8
Position : 9
2 ROLLER, Rounded End
Position : 9
1 CAPSCREW, 5/8-11 x 3-1/2
Position : 10
2 CARRIAGE BOLT, 5/16-18 x 1-1/4
Position : 10
1 RING, Snap, Transmission
Position : 10
1 CARRIAGE BOLT, 5/16-18 x 2 3/4
Position : 10
1 WIRE, 12GA 5-15/16 Long, Red
Position : 10
2 CARRIAGE BOLT, 5/16-18 x
Position : 10
2 NUT, Hex Lock ESNA, 1/4-20
Position : 10
4 CAP, Hub, Gray
Position : 10
1 DECAL, Hood Stripe, LH, Massey Ferguson
Position : 10
1 DECAL, Hood Stripe, RH, Massey Ferguson
Position : 10
1 LOCKWASHER, 3/8
Position : 10
1 SLIDE
Position : 10
2 HUB ADAPTER, Pulley
Position : 10
6 WASHER, 3/8
Position : 10
1 NUT, Hex Lock Esna Light, 1/4-20
Position : 10
2 GASKET, Foam Poly
Position : 10
1 NUT, Hex Flange, 3/8-16, MAC Lock Large, Black
Position : 10
10 WASHER, Plain, 1-1/4
Position : 10
3 SPACER, 11/16 x 5/32 x 2-11/16
Position : 10
2 FITTING, Grease for Wear Plate, 1/4-20, with Ball
Position : 11
8 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 3/8
Position : 11
1 TIE, Self Locking
Position : 11
1 COLLOR, Spline, Transmission
Position : 11
1 SPRING
Position : 11
1 ARM & HUB ASSEMBLY, Idler
Position : 11
1 CARRIAGE BOLT, 5/16-18 x 2-1/4
Position : 11
1 PLUG, Hole, Square
Position : 11
1 CAPSCREW, Hex Head, 3/8-16 x
Position : 11
2 KEY, Parellel, 3/16 x 3/16 x 1-1/2
Position : 11
1 DECAL, USA Logo Stars & Stripe
Position : 11
1 NUT, Hex, 3/8-16
Position : 11
1 WASHER, Plain, 1/2
Position : 11
1 PULLEY, 1-1/4" O.D.
Position : 11
1 SPRING, Extension, Idler Arm
Position : 11
1 CAPSCREW, Hex Head, 1/4-20 x 2 1/4
Position : 11
1 ARBOR SHAFT & BEARINGS ASSEMBLY
Position : 11
4 BUSHING, 5/8 x 3/4 x 13/32, Powder Metal
Position : 11
7 ROLLER
Position : 11
3 BEARING, Ball, 11/16 x 1-9/16 x 15/32
Position : 11
8 ROLLER
Position : 11
4 CAPSCREW, Hex Head, Flange Lock, 3/8-16 x 3/4
Position : 12
1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4, Black
Position : 12
1 PULLEY & HUB ASSEMBLY
Position : 12
2 LOCK WASHER, Transmission
Position : 12
1 SHAFT, BYPASS
Position : 12
1 WASHER, 5/8
Position : 12
2 PIN, Quick
Position : 12
1 HOUR METER, (Includes Ref. Nos. 12)
Position : 12
1 SLIDE, Seat
Position : 12
4 NUT, KEPS Lock, 5/16-18
Position : 12
4 WASHER, 3/4
Position : 12
1 DECAL, Transmission Release Valve
Position : 12
1 SPRING
Position : 12
1 BOLT, Shoulder, 3/8-16
Position : 12
4 WASHER, Belleville
Position : 12
1 SPACER, Hardened
Position : 12
3 GASKET, Foam
Position : 12
1 LINK, Drag
Position : 13
1 NUT, Hex Flange Two-Way Lock, 3/8-16
Position : 13
1 TIE, Self Locking, 3-5/8 Long
Position : 13
1 HOSE, 59" Long
Position : 13
1 FAN, 10 Blade, Transmission
Position : 13
1 LEVER, BYPASS
Position : 13
1 RING, Clipring Extension
Position : 13
1 ROD, Cruise
Position : 13
1 PLUG, Dash
Position : 13
4 NUT, Speed, 5/16-18, Lug
Position : 13
1 SCREW, Torx Head, # 8-16 x 1/2
Position : 13
4 NUT, ESNA Lock, 5/16-18
Position : 13
2 WASHER
Position : 13
2 DECAL, Danger Rotating Blades (Export)
Position : 13
2 NUT, Hex Aluminum Insert, 3/8-16
Position : 13
1 NUT, Push
Position : 13
2 NUT, Hex Flange, 9/16-8
Position : 13
1 CAPSCREW, Hex Head, 3/8-16 x 2-1/4
Position : 13
6 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 13
2 NUT, Hex, Flange, Lock, 1/2-13
Position : 13
3 ARBOR HOUSING ASSEMBLY, (Includes Ref. No. 14)
Position : 13
2 NUT, Hex Flange, 2 Way Lock, 1/2-13
Position : 13
1 WASHER
Position : 14
2 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
Position : 14
1 WASHER, Hex, 7/16, Black
Position : 14
2 CLIP, Wire
Position : 14
1 RING, E Transmission
Position : 14
1 RING
Position : 14
1 PULLEY, w/Bearing
Position : 14
1 ROD, Return
Position : 14
1 CLIP, Hour Meter (Service Only)
Position : 14
1 HEADLIGHT ASSEMBLY, (Includes Ref. Nos. 15 & 16)
Position : 14
4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 5/8
Position : 14
1 COVER, Dash
Position : 14
1 WASHER, Flat, 5/16 x 1-1/4
Position : 14
2 WHEEL & TIRE ASSEMBLY, (Includes Ref. Nos. 6, 15, 16 & 17)
Position : 14
1 DECAL, Danger Do Not Put Hands/Feet in Mower
Position : 14
1 NUT, Hex Flange, 3/8-16
Position : 14
1 PULLEY, 4" O.D.
Position : 14
1 PULLEY
Position : 14
5 WASHER, 5/16
Position : 14
1 COVER, Arbor, LH
Position : 14
2 GREASE FITTING
Position : 14
5 CAPSCREW, Hex Head Taptite, 5/16 -18 x 3/4
Position : 14
3 FITTING, Grease
Position : 14
2 WASHER
Position : 15
1 SHAFT & PINION ASSEMBLY, Steering Manual
Position : 15
1 LOCKWASHER, 7/16
Position : 15
2 WASHER, 1/2
Position : 15
1 SEALING CAP
Position : 15
1 WASHER, 3/8
Position : 15
1 SPRING, Cruise Return to Frame
Position : 15
2 NUT, Hex, 5/16-24
Position : 15
4 BULB, Headligh
Position : 15
2 PLUG, Plastic
Position : 15
1 SPRING, Extension, 4-1/8
Position : 15
1 CAM ASSEMBLY, Lift
Position : 15
1 TIRE, 22 x 10, 10 Super Turf
Position : 15
1 DECAL, Free Floating Mower, Silver
Position : 15
1 SPACER
Position : 15
4 NUT, Hex Whiz Lock, 5/16-18
Position : 15
1 SPACER
Position : 15
2 CAPSCREW, Hex Head, 5/16-18 x 1 1/4
Position : 15
1 HOUSING ASSEMBLY, 40", Orange
Position : 15
1 HOUSING ASSEMBLY, 40", Red
Position : 15
1 LEVER ASSEMBLY, Idler, (Includes Ref. Nos. 3, 11 & 14)
Position : 15
3 WASHER, 3/8
Position : 15
1 LEVER ASSEMBLY, Idler, (Includes Ref. Nos. 11 & 14)
Position : 15
6 CAPSCREW, Hex Head Taptite, 5/16 -18 x 3/4
Position : 15
1 NUT, Hex Jam, 1/2-20
Position : 16
1 RING, Clipring Extension
Position : 16
1 CAPSCREW, Hex Head, 7/16-20 x 3-3/4
Position : 16
1 CAPSCREW, Hex Head, 7/16-20 x 3-1/2, 20HP
Position : 16
1 CAPSCREW, Hex Head, 7/16-20 x 2-3/4, 20HP
Position : 16
4 SCREW, Hex Head Taptite, 1/4-20 x 3/8
Position : 16
1 PULLEY & HUB ASSEMBLY
Position : 16
1 RING
Position : 16
2 NUT, Hex Flange ESNA, 3/8-16
Position : 16
2 NUT, Hex KEPS, 5/16-18
Position : 16
3 LOCKWASHER, External Tooth, 5/16
Position : 16
4 SOCKET, Headlight
Position : 16
1 POD, with Cup Holder, LH
Position : 16
1 LIFT SHAFT ASSEMBLY,
Position : 16
1 SPACER
Position : 16
1 TUBE, Tire, 20 x 8, Rear
Position : 16
2 BUSHING
Position : 16
4 WASHER, Flat, 5/16
Position : 16
4 NUT, Hex Flange Whiz Lock, Large, 3/8-16
Position : 16
3 NUT, Hex 5/16-18
Position : 16
1 CARRIAGE BOLT, 3/8-16 x
Position : 16
1 PIN, Cotter
Position : 16
26 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4
Position : 16
1 BEARING, 3/4 x 1-11/16 x 13/16, 3" Long Housing
Position : 17
1 CLUTCH, Electric
Position : 17
1 CLUTCH, Electric, 18HP
Position : 17
1 CLUTCH, Electric, 20HP
Position : 17
1 KEY
Position : 17
1 V-BELT, Drive
Position : 17
1 PULLEY, Idler
Position : 17
2 CAPSCREW, Hex Washer Head Plastite, 10-14 x 5/8
Position : 17
1 SOLENOID
Position : 17
1 FUEL GAUGE
Position : 17
4 CARIAGE BOLT, 5/16-18 x 3/4
Position : 17
1 WHEEL, 7 x 9.97, W/ 3/4 OD Shaft
Position : 17
1 DECAL, 38", Silver on Black with Stripe
Position : 17
1 DECAL, 40", Silver on Black with Stripe
Position : 17
1 DECAL, 44", Silver on Black with Stripe
Position : 17
1 DECAL, 50", Silver on Black with Stripe
Position : 17
2 WASHER, 3/8
Position : 17
1 CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/4
Position : 17
2 GUIDE, Belt
Position : 17
2 CAPSCREW, Hex Head, 3/8-16 x 1-3/8
Position : 17
3 LOCKWASHER, Spring 5/16
Position : 17
2 PIN, Blade
Position : 17
1 LEVER ASSEMBLY, Idler Arm, (Includes Ref. Nos. 11 & 14)
Position : 17
1 RETAINER, Pin, Spring
Position : 17
1 CAPSCREW, Hex Washer Head, 5/16-18 x 1/2, Black
Position : 17
1 SPACER
Position : 18
1 SPACER, 3/4 x 1-1/16 x 3/8, Powder Metal
Position : 18
1 KEY, HI PRO, 1/4 x 2 1/2
Position : 18
1 PULLEY & HUB ASSEMBLY, 4-1/2 OD
Position : 18
1 ROD, Transmission Release
Position : 18
2 BUSHING, 1 x 1-1/8 x 5/8, Nylon
Position : 18
1 SWITCH, Push, Neutral Start, Gray
Position : 18
1 SWITCH ASSEMBLY, Ignition, 6 Pin, (Includes Ref. Nos. 17, 18, 19, 20 & 21)
Position : 18
1 GROMMET
Position : 18
1 ROD, Lift
Position : 18
1 DECAL, Danger Do Not Operate Without Deflector
Position : 18
2 WASHER, Plain, 13/32
Position : 18
5 WASHER, Plain, 13/32
Position : 18
4 WASHER, 3/8
Position : 18
2 SPACER
Position : 18
2 WASHER, 3/8, Black
Position : 18
1 BRACKET & PIN ASSEMBLY
Position : 18
1 NUT, Hex Flange, 5/16,
Position : 18
2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4, G8, 1/2 Thread
Position : 18
2 CARRIAGE BOLT, 3/8-16 x
Position : 19
2 NUT, Hex Flange Whiz Lock, 3/8-16, Small
Position : 19
4 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 1-1/2
Position : 19
1 WASHER, Hex
Position : 19
3 PIN, Quick
Position : 19
2 PACKING
Position : 19
1 ARM, Brake
Position : 19
1 SPACER, 11/32 x 5/8 x 1-13/32
Position : 19
1 KEYS, Set of
Position : 19
8 CAPSCREW, Hex Head Dog Point, 1/4-20 x 7/8
Position : 19
2 RING, "E" External
Position : 19
1 DECAL, Height of Cut, 38", 44" & 50"
Position : 19
2 SPACER
Position : 19
1 CLIP, Pin, Safety
Position : 19
1 ROD, Mower Hitch
Position : 19
1 SPRING, Compression 3-7/8" Long
Position : 19
2 WASHER, Spline
Position : 19
1 UPSTOP
Position : 19
3 WASHER, Bellevilled, 9/16, Black
Position : 19
5 WASHER, 5/16, Black
Position : 19
2 SPACER
Position : 20
2 CAPSCREW, Hex Whiz Lock Flange, 3/8-16 x 3/4, Black
Position : 20
1 LOCKWASHER, External Tooth, 3/8
Position : 20
1 CAPSCREW, Hex Head, 5/16-18 x
Position : 20
1 SEAL TC
Position : 20
1 PEDAL ASSEMBLY, Foot
Position : 20
1 WASHER, 5/16, Black
Position : 20
1 COVER, For Ignition Switch, Plastic
Position : 20
4 NUT, Hex Flange Whiz Lock, 5/16-18
Position : 20
4 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
Position : 20
1 DECAL, Height of Cut, 40"
Position : 20
1 ROD, Latch
Position : 20
1 LINK ASSEMBLY, Lift
Position : 20
4 BEARING
Position : 20
1 SPRING, Extension, Hitch Release
Position : 20
1 PUSH NUT, 1/4
Position : 20
2 CAPSCREW, Hex Head, 7/16-14 x 2-1/4 G8
Position : 20
1 SPRING
Position : 20
1 SHAFT, Arbor (LH)
Position : 20
1 PIN, Cotter, 1-1/4, Black
Position : 21
1 CAPSCREW, Hex Head, 7/16-20 x 2-3/4
Position : 21
4 WASHER, 5/16, Black
Position : 21
14 SCREW, TAPPING
Position : 21
1 CARRIAGE BOLT, 1/4-20 x 1-1/4
Position : 21
1 NUT, Hex Flange, 5/8-32, Ignition Switch
Position : 21
1 CAP, Gas
Position : 21
1 ROD, Lift
Position : 21
1 COTTER PIN
Position : 21
2 SPACER
Position : 21
1 GRIP, Black Soft for Rod
Position : 21
12 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x
Position : 21
1 CAPSCREW, Hex Head, 3/8-16 x 3-1/2
Position : 21
3 SHIELD, Grass, Lower
Position : 21
2 NUT, Hex Lock ESNA Light, 5/16-18, Black
Position : 21
6 BUSHING
Position : 22
8 NUT, Speed, 1/4-20, Lug
Position : 22
1 CLUTCH, Electric, OGURA
Position : 22
4 CAPSCREW, Hex Head, 5/16-18 x 2-3/4, Black
Position : 22
2 SCREW, TAPPING
Position : 22
1 LOCKWASHER, Internal Tooth, 5/8, Thin
Position : 22
1 TUBE & ELBOW ASSEMBLY
Position : 22
1 SPRING
Position : 22
1 COTTER PIN
Position : 22
2 GASKET, Foam
Position : 22
1 BUTTON, Red
Position : 22
2 WASHER, Shim
Position : 22
1 ROD, Adjustment
Position : 22
2 NUT, Hex Flange Lock, 7/16-14
Position : 23
4 CAPSCREW, Hex Flange Whiz Lock, 1/4-20 x 5/8
Position : 23
1 TIE
Position : 23
1 WASHER, 15/32 x 15/16, Black
Position : 23
1 SPRING, Compression
Position : 23
1 WASHER, Shim
Position : 23
1 BUSHING, 3/8 x 9/16 x 5/8, Rubber
Position : 23
2 CAPSCREW, Hex Head, 3/8-16 x 1-1/2
Position : 23
4 NUT, Hex, 5/16-18
Position : 23
2 ARBOR HOUSING ASSEMBLY (Includes Ref. No. 24)
Position : 23
1 NUT, Push
Position : 23
4 SPACER
Position : 23
2 SPACER, 3/8 x 3/4 x 1/2
Position : 23
3 WASHER, Hex, 11/16 x
Position : 23
3 FITTING, Lube
Position : 24
2 NUT, Speed, 5/16-18, Lug, Black
Position : 24
4 CAPSCREW, Hex Head Taptite, 3/8-16 x 1-1/2
Position : 24
1 PIN, Cotter, Black
Position : 24
1 CASE, CENTER
Position : 24
3 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
Position : 24
1 PIN, Cotter
Position : 24
3 TIE, Strap, 7-5/16 Long
Position : 24
1 TANK, Fuel
Position : 24
2 FITTING, Lube
Position : 24
2 NUT, Hex Toplock Sprial Flange, 3/8-16
Position : 24
7 WASHER, 5/8
Position : 24
2 ADAPTER, Blade
Position : 24
2 NUT, Hex Toplock Spiralock Flange, 3/8-16
Position : 24
1 SPACER, 3/8 x 3/4 x 15/16
Position : 24
3 WASHER, Spring 15/32, Black
Position : 24
2 NUT, Hex Aluminum Insert Lock, 3/8-16
Position : 24
1 SPINDLE REPLACEMENT KIT, LH (Includes Ref. Nos. 22, 26, 27, 28, 29 & 30)
Position : 25
1 LOCKWASHER, External Tooth, 3/8
Position : 25
1 ROD, Brake
Position : 25
1 PIN 3 x 9.8
Position : 25
1 NUT, Hex Lock ESNA Light, 5/16-18
Position : 25
1 DISC, Fricion
Position : 25
1 SWITCH, Headlights , 2 Terminal
Position : 25
8 NUT, Hex KEPS, 5/16-18
Position : 25
1 HOUSING ASEMBLY, 38"
Position : 25
1 WASHER & NUT ASSEMBLY, 3/8 x 1-1/2
Position : 25
1 DEFLECTOR, Discharge
Position : 25
3 CAPSCREW, Hex Head, 7/16-14 x
Position : 25
1 MOWER HOUSING ASSEMBLY, 50" Mower (Orange)
Position : 25
1 MOWER HOUSING ASSEMBLY, 50" Mower (Red)
Position : 25
1 CAPSCREW, 3/8-16 x 7/8, GR8
Position : 26
2 CLIP, Wire 1/8
Position : 26
1 SPRING, Compression, 3-1/4" Long, Black
Position : 26
1 FILTER
Position : 26
1 WASHER, 5/16, Black
Position : 26
1 BOOT, Insulator Cable Terminal, 1-15/16 Long, Red
Position : 26
4 CAPSCREW, Taptite R, 5/16-18 x 1-3/4
Position : 26
1 SPRING, Extension
Position : 26
1 BRACKET, Upstop
Position : 26
2 SHAFT, Arbor (Center & RH)
Position : 26
1 WASHER, Spring, 3/8
Position : 27
8 CAPSCREW, Hex Head Flange Lock, 1/4-20 x 5/8
Position : 27
1 SPRING, Compression, 3-5/8" Long, Black
Position : 27
3 BOLT 10 x
Position : 27
2 NUT, Hex Flange Whiz Lock Large, 5/16-18
Position : 27
1 CABLE, #6 x 25" Long, Ring Terminals
Position : 27
1 POD, RH with 2 Slots
Position : 27
8 CAPSCREW, Taptite, 5/16-18 x 3/4
Position : 27
1 ARM, Idler
Position : 27
2 ROLLER
Position : 27
1 CARRIAGE BOLT, 5/16-18 x
Position : 27
2 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1, Black
Position : 27
1 MOWER HOUSING ASSEMBLY, 44" Mower (Orange)
Position : 27
1 MOWER HOUSING ASSEMBLY, 44" Mower (Red)
Position : 27
1 HUB & ARM ASSEMBLY
Position : 28
2 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1/2, Black
Position : 28
2 CAPSCREW, Hex Head Taptite, 5/16-18 x 1/2
Position : 28
1 NUT, Hex FlangeESNA, 3/8-16, Black
Position : 28
2 VALVE, IDS 1.0
Position : 28
1 CABLE, #6 x 8" Long, Ring Terminals
Position : 28
1 CRANK, Height of Cut
Position : 28
2 CAPSCREW, Hex, Head, 7/16-14 x 1-1/4
Position : 28
2 HUB
Position : 28
1 SPACER
Position : 28
1 CARRIAGE BOLT, 1/4-20 x 7/8
Position : 28
1 COVER, Arbor
Position : 28
1 INDICATOR, Cutting Height
Position : 28
1 KEY, Woodruff
Position : 29
1 MUFFLER, Briggs & Stratton, Vanguard Twin
Position : 29
8 NUT, Speed, 1/4-20
Position : 29
3 WASHER, 3/8, Black
Position : 29
2 SPRING, IDS
Position : 29
1 PAD, Brake Pedal
Position : 29
1 BOOT, Insulator Battery Terminal
Position : 29
2 SPACER, 25/64 x 5/8 x 3/16, Hardened
Position : 29
1 KNOB
Position : 29
2 WASHER, Spring
Position : 29
2 PULLEY, Idler
Position : 29
2 CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/4
Position : 29
1 UPSTOP
Position : 29
1 SPINDLE, LH
Position : 30
2 NUT, Speed, 5/16-18
Position : 30
1 TRANSMISSION ASSEMBLY, K57, without Pulley
Position : 30
2 BALL, 3/16
Position : 30
4 CARRIAGE BOLT, 5/16-18 x 7/8
Position : 30
3 NUT, Hex, 1/4-20
Position : 30
2 NUT, Hex Flange Two-Way Lock, 3/8-16
Position : 30
1 PAL NUT
Position : 30
2 WASHER, Hex
Position : 30
2 CARRIAGE BOLT, 3/8-16 x
Position : 30
2 WASHER, 1/4
Position : 30
1 PLUG, Hole
Position : 30
2 SPACER, W x 5/8 x L
Position : 30
4 LOCKWASHER, 5/16
Position : 31
1 CONTROL ARM ASSEMBLY
Position : 31
1 CYLINDER BLOCK ASSEMBLY
Position : 31
2 CAPSCREW, 5/16-18 x
Position : 31
2 LOCKWASHER, 1/4
Position : 31
2 WASHER, 3/8
Position : 31
1 TRUNNION, Threaded
Position : 31
1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/2
Position : 31
2 NUT, Hex, 5/16-18
Position : 31
2 NUT, Push
Position : 31
2 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1-1/4
Position : 31
1 CARRIAGE BOLT, 3/8-16 x 1-1/2
Position : 32
4 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 7/8
Position : 32
1 SPRING, PUMP
Position : 32
2 WASHER, 1/4
Position : 32
4 CAPSCREW, Hex Flange Whiz Lock Dog Point, 5/16-18 x
Position : 32
3 WASHER, 5/8
Position : 32
2 SHIELD, Grass, Lower
Position : 32
1 SPACER
Position : 32
1 NUT, Hex Jam, 5/16-18
Position : 32
1 LOCKWASHER, Spring 1/4
Position : 32
2 WASHER, 1/4, Black
Position : 32
2 CAPSCREW, Hex Head, 7/16-14 x 2, GR8
Position : 33
2 NUT, KEPS Lock, 5/16-18
Position : 33
1 SHAFT, PUMP
Position : 33
1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4
Position : 33
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position : 33
1 TRUNNION
Position : 33
2 SHAFT, Arbor
Position : 33
1 TRUNNION
Position : 33
1 NUT, Hex 1/4-20
Position : 33
2 NUT, Hex, Jam, 1/2-13
Position : 33
3 RING E15
Position : 34
1 CABLE, #6 x 26 Long, Ring Terminal
Position : 34
1 PIN, Roll,
Position : 34
2 WASHER
Position : 34
1 BELT, Timing, 38 Tooth
Position : 34
1 ROD, Height Adjustment
Position : 34
1 DOOR, Mulching, Black Plastic
Position : 34
1 WASHER, 11/32
Position : 34
1 CAP, Spring End
Position : 34
1 SPACER
Position : 35
1 CARRIAGE BOLT, 5/16-18 x 1, Black
Position : 35
1 BEARING
Position : 35
4 NUT, Hex KEPS, 5/16-18
Position : 35
1 BATTERY, 12 Volt
Position : 35
1 WASHER, Detent
Position : 35
2 NUT, Hex, Jam, 1/2-13
Position : 35
1 SPRING
Position : 35
4 SCREW, Torx Head, 5/16-18 x 7/8
Position : 36
1 WASHER, 5/16, Black
Position : 36
1 HOUSING
Position : 36
1 PAD, Foot Pedal Forward
Position : 36
1 STRAP, Battery, 14 Long, Rubber
Position : 36
2 CARRIAGE BOLT, 1/4-20 x 7/8
Position : 36
2 NUT, Hex, 5/8-11
Position : 36
1 ROD, Pivot
Position : 36
3 WASHER, 33/64
Position : 36
2 WASHER, Lock, 1/4
Position : 36
1 CLIP, Hair Pin
Position : 36
1 SPRING
Position : 36
1 BUMPER, Chrome, Optional
Position : 37
1 CAPSCREW, Hex Head, 5/16-18 x 2, Black
Position : 37
1 BEARING, THRUST
Position : 37
2 CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8
Position : 37
2 NUT, Hex Jam, 1/2-13
Position : 37
2 PLUG, Hole
Position : 37
1 PIN
Position : 37
1 NUT, Hex 5/16-18
Position : 37
2 CAPSCREW, Hex Whiz Lock, 5/16-18 x 3/4
Position : 38
1 BLOCK, CYLINDER
Position : 38
1 PAD, Foot Pedal Reverse
Position : 38
2 CLIP, Hair Pin
Position : 38
1 LOCKWASHER, Spring 5/16
Position : 38
1 WASHER 12 x 24 x
Position : 39
1 NUT, Hex Lock ESNA Light, 1/4-20
Position : 39
1 SWITCH, Reverse Pedal
Position : 39
1 PIN, Clevis
Position : 39
1 WASHER, 5/16
Position : 39
2 NUT, Hex Falnge Whiz Lock, 5/16-18
Position : 40
1 SHAFT, MOTOR
Position : 40
1 CAM, Roller
Position : 40
1 SWITCH, Push Button, Foot Pedal
Position : 40
2 UPSTOP
Position : 40
1 NUT, Push
Position : 40
2 NUT, Hex, 5/16-18
Position : 40
2 HUB, Pulley, Center & RH
Position : 40
1 SPINDLE, RH
Position : 41
1 RING
Position : 41
1 SPRING, Extension
Position : 41
1 SWITCH, Cruise Control, Grey, NO
Position : 41
1 INDICATOR, Height of Cut
Position : 41
4 CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/4
Position : 41
1 COVER ASSEMBLY, Arbor, RH (Includes Ref. Nos. 42 thru 46)
Position : 41
2 WASHER, Lock, 5/16
Position : 41
2 CARRIAGE BOLT, 5/16-18 x 3/4
Position : 41
2 NUT, Hex, Whizlock, 5/16-18
Position : 41
1 WASHER
Position : 42
1 GEAR, MOTOR
Position : 42
2 CAPSCREW, Hex Washer Head Plastite, 1/4 x 1/2
Position : 42
1 WASHER, Flat, 5/16
Position : 42
6 WASHER, 5/16
Position : 42
1 COVER, Arbor RH
Position : 42
2 NUT, Hex Flagne Whiz Lock, 5/16-18
Position : 42
8 CARRIAGE BOLT, 5/16-18 x 3/4, Black (CE Only)
Position : 42
1 RETAINING RING
Position : 43
1 BEARING 6202UC3
Position : 43
1 SWITCH, Seat, Grey, NC
Position : 43
4 NUT, Push, 5/16
Position : 43
8 NUT, Hex Flange Whiz Lock, 5/16-18, Black (CE Only)
Position : 43
1 CRANK, Cutting Height
Position : 43
2 THRUST METAL
Position : 44
1 HARNESS, Wiring
Position : 44
1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4
Position : 44
2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
Position : 44
1 SWASH PLATE ASSEMBLY
Position : 45
1 ROD, Adjustment
Position : 45
1 DECAL, Height of Cut
Position : 45
4 RIVIT, Pop
Position : 45
1 THRUST PLATE B
Position : 46
1 SPACER
Position : 46
4 WASHER, 3/16 x 3/4 x 1/16
Position : 46
1 BEARING K81105
Position : 47
2 ROLLER
Position : 47
1 NUT, Hex Centerlock 3/8-16
Position : 47
2 WASHER, Bellville
Position : 47
1 KNOB, Height Crank
Position : 47
1 THRUST PLATE A
Position : 48
1 NUT, Hex Flange Lock, 5/16-18
Position : 48
1 ARBOR SHAFT & BEARING ASSEMBLY
Position : 48
1 SHAFT, CONTROL
Position : 49
8 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 49
1 FULCRUM, ECCENTRIC
Position : 50
1 NUT, Hex Adjusting
Position : 50
1 SPRING, TORSION
Position : 51
3 NUT, Toplock Spiral Flange, 3/8-16
Position : 51
1 LEVER, CONTROL
Position : 52
1 ARM, CONTROL
Position : 53
1 PLATE, JERK
Position : 54
1 WASHER, 1/2
Position : 54
1 WASHER
Position : 55
1 BOLT, Shoulder, 3/8-16 x 1-11/32
Position : 55
1 PIN, COTTER
Position : 56
1 NUT, Push 5/8
Position : 56
1 PIN, SPRING
Position : 57
1 PIN 6.0A x 4.0
Position : 58
2 PACKING
Position : 59
1 PIVOT, 3/4 Hex
Position : 59
1 NUT
Position : 60
2 CARRIAGE BOLT, 5/16-18 x
Position : 60
1 GEAR & PINION ASSEMBLY
Position : 61
1 GUIDE ASSEMBLY, Rod
Position : 61
1 GEAR, FINAL CONTR TRAC
Position : 62
2 COLLAR, PINION
Position : 63
1 SHAFT, REDUCTION
Position : 64
2 WASHER, 12 x 32 x 3.2
Position : 65
1 GEAR, REDUCTION
Position : 66
1 PINION, FINAL
Position : 67
1 SHAFT, AXLE RH
Position : 68
1 SHAFT, AXLE LH
Position : 69
2 WASHER, THRUST
Position : 70
2 RING
Position : 71
2 SEAL 19 x 32 x
Position : 72
2 BUSHING 19 x
Position : 73
1 SHOE, BRAKE
Position : 75
1 ARM, BRAKE
Position : 76
1 SHAFT, BRAKE
Position : 77
1 SPRING, RETURN B
Position : 78
1 BRAKE, ACTUATOR
Position : 79
1 PIN
Position : 80
2 PACKING
Position : 81
2 PIN, SPRING
Position : 82
2 COLLAR, SPLINE
Position : 83
1 FAN
Position : 85
1 LOCKWASHER
Position : 86
1 RING, SNAP
Position : 87
1 PIN 3.0A x
Position : 90
1 OIL SEAL
Position : 91
1 PIN, ROLL
Position : 95
2 WASHER, THRUST DIFF
Position : 97
2 PIN, 3.0A x
Position : 98
1 SPRING, CHARGE
Position : 99
1 CHARGE PUMP CASE ASSEMBLY
Position : 100
1 K57 SMP SEAL KIT
Position : 200
50" Mower Deck (CE)
Position : 1694174
44" Mower Deck (CE)
Position : 1694178
50" Mower Deck
Position : 1694473
50" Mower Deck
Position : 1694474
Broadmoor, 18HP Hydro RMO
Position : 1694629
Broadmoor, 18HP Hydro RMO
Position : 1694630
Broadmoor, 18HP Hydro RMO (CE)
Position : 1694631
Broadmoor, 20HP Hydro RMO
Position : 1694632
1620H, 20HP Hydro RMO
Position : 1694633
1620H, 20HP Hydro RMO
Position : 1694634
2620H, 20HP Hydro RMO (CE)
Position : 1694635
2620H, 20HP Hydro RMO
Position : 1694636
Broadmoor, 20HP Hydro RMO
Position : 1694682
Broadmoor, 18HP Hydro RMO (CE)
Position : 1694683
2618, 18HP Hydro RMO (CE) Mower Decks
Position : 1694807
Broadmoor, 18HP Hydro RMO and 44" Mower Deck 1694036 38" Mower Deck
Position : 2690273
Broadmoor, 18HP Hydro RMO and 38" Mower Deck 1694042 38" Mower Deck
Position : 2690274
Broadmoor, 20HP Hydro RMO and 44" Mower Deck
Position : 2690275
Broadmoor, 18HP Hydro RMO and 44" Mower Deck (CE) 1694339 40" Mower Deck
Position : 2690276
Broadmoor, 18HP Hydro RMO and 40" Mower Deck (CE) 1694340 40" Mower Deck
Position : 2690277
Broadmoor, 20HP Hydro RMO and 50" Mower Deck
Position : 2690278
1620H, 20HP Hydro RMO and 44" Mower Deck
Position : 2690279
2620H, 20HP Hydro RMO and 44" Mower Deck
Position : 2690281
2620H, 20HP Hydro RMO and 50" Mower Deck
Position : 2690282
2618, 18HP Hydro RMO and 40" Mower Deck (CE) 1694341 40" Mower Deck (CE)
Position : 2690399
2618, 18HP Hydro RMO and 44" Mower Deck (CE) 1694821 40" Mower Deck (CE)
Position : 2690400
Broadmoor, 18HP Hydro RMO TRACTOR ONLY 1694037 44" Mower Deck
Position : 2690407
Broadmoor, 20HP Hydro RMO TRACTOR ONLY
Position : 2690408
2620H, 20HP Hydro RMO and 44" Mower Deck
Position : 2690424
2618H, 18HP Hydro RMO and 40" Mower Deck (CE) 1694043 44" Mower Deck
Position : 2690430