Assistant réparation
Powered by ChatGPT
Liste des pièces détachées
1 CAP, Steering Wheel, Simplicity (Decal Not Included)
Position : 1
1 CAP, Steering Wheel, Plain
Position : 1
1 * TRANSMISSION, Tuff Torq K46BL
Position : 1
1 PAD, Foot Pedal Reverse
Position : 1
1 SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. Nos. 2, 3, 4 & 5)
Position : 1
1 SEAT, Hi Back, Steel Pan
Position : 1
1 ROD, Lift Handle
Position : 1
8 WASHER, 3/4
Position : 1
4 WASHER, Flat (Use on 22 Gross HP Models only)
Position : 1
1 DECAL, Ignition Switch Symbol, White/Black
Position : 1
1 NUT, Hex Lock, ESNA Light, 5/8-18, Thin
Position : 2
1 VALVE, Shut Off Oil Drain
Position : 2
1 WASHER, 5/8
Position : 2
4 WASHER, Plain, 5/16
Position : 2
1 GRIP
Position : 2
2 WHEEL & TIRE ASSEMBLY, Front
Position : 2
1 WASHER, 5/8 x 1-1/8
Position : 3
1 SEAL, Short
Position : 3
1 SEAL, Long (Single)
Position : 3
1 ROD, Bypass, 11.44 LG Yellow
Position : 3
1 SPACER, Pivot 0.330ID 1.76OD .37TH
Position : 3
1 LOCKWASHER, Internal Tooth, 5/8
Position : 3
1 LATCH, Seat
Position : 3
1 CAPSCREW, Hex Head 5/16-18 x 1 G5
Position : 3
1 TIRE, Turf 15 X 6.00 - 6 Saver TL
Position : 3
1 DECAL, Transmission Tow/ Release Lever
Position : 3
1 STEERING WHEEL, w/Aluminum Insert
Position : 4
2 PIN, Quick
Position : 4
1 NUT, Hex, Flange, 5/8-32
Position : 4
4 CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x
Position : 4
1 WASHER, 5/16
Position : 4
1 TUBE, Tire, Front
Position : 4
1 DECAL, Fuel Level
Position : 4
1 RING, Klipring Extension
Position : 5
4 CAPSCREW, Hex Washer Head Taptite 5/16-18 x 5/8
Position : 5
1 NUT, Hex Flange, 5/16-18 ESNA
Position : 5
1 COVER, Ignition
Position : 5
4 SPACER, 0.32 ID x 1-1/2 OD
Position : 5
1 SPRING, Torsion
Position : 5
1 WHEEL & BUSHINGS ASSEMBLY, Front
Position : 5
1 DECAL, Tunnel, Images Only (CE/Export)
Position : 5
1 DECAL, Tunnel, Images/Text Domestic
Position : 5
2 WASHER, 3/4 x
Position : 6
2 NUT, Hex, Flange Whizlock, 5/16-18
Position : 6
1 IGNITION KEY (Set of 2)
Position : 6
1 SUPPORT, Seat
Position : 6
2 VALVE STEM & CAP
Position : 6
1 DECAL, Belts, Blades
Position : 6
2 BUSHING, Steering
Position : 7
1 MUFFLER (Twin)
Position : 7
VENT VALVE
Position : 7
1 SWITCH, Headlights, 2 Terminal
Position : 7
2 BOLT, Carriage, 5/16-18 x 3/4
Position : 7
1 SPACER, Pivot Powdered Metal
Position : 7
4 BEARING
Position : 7
1 * TRANSMISSION ASSEMBLY, K46BP
Position : 8
1 * TRANSMISSION, Tuff Torq K46BL (Used with 22" Tire Models)
Position : 8
MAGNET
Position : 8
1 ROD, Cruise Latch, 16.97LG
Position : 8
1 PLUG, Hole, Square
Position : 8
1 PIVOT, Seat
Position : 8
1 NUT, Hex Flange 5/16-18, Whiz Lock Small
Position : 8
1 FITTING, Grease, 1/4-28 Thread
Position : 8
1 DECAL, Mower Height
Position : 8
1 DECAL, Mower Height (Used on 46" Deck)
Position : 8
1 PIPE, Exhaust R.H. (Twin)
Position : 9
4 SCREW, Hex Head Flange Lock, 5/16-18 x 2-1/2
Position : 9
2 CLIP, Linkage, Black
Position : 9
1 PLUG, Hour Meter (Kohler and B&S Single)
Position : 9
4 BOLT, Carriage, 5/16-18 x 3/4
Position : 9
4 WASHER, Special Yellow
Position : 9
1 DECAL, Danger, Chute in Place
Position : 9
1 PIPE, Exhaust L.H. (Twin)
Position : 10
1 ROD, Parking Brake, 16.38 LG
Position : 10
1 METER, Hour, LCD (B&S V-Twin Only)
Position : 10
4 NUT, Hex Flange, ESNA, 5/16-18
Position : 10
4 RING, Retaining
Position : 10
4 RING, Retaining (Use on 22 Gross HP Models only)
Position : 10
1 DECAL, 38"
Position : 10
1 DECAL, 44"
Position : 10
1 DECAL, 46"
Position : 10
1 SPACER
Position : 11
2 BOLT, Carriage, 3/8-16 x 1-1/2
Position : 11
1 WASHER, Plain, 1/4 (6 Total for Export)
Position : 11
2 BOLT, Shoulder, 5/16-18 G5
Position : 11
4 CAP, Hub
Position : 11
4 CAP, Hub (Use on 22 Gross HP Models only)
Position : 11
1 MUFFLER (Single)
Position : 12
1 V-BELT, Drive Belt, Aramid/Kevlar
Position : 12
BYPASS SHAFT A
Position : 12
1 BRACKET, Idler
Position : 12
1 NUT, Hex, ESNA, 1/4-20
Position : 12
2 SPRING, Compression
Position : 12
2 KEY, 3/16 x 3/16 x
Position : 12
2 KEY, 3/16 x 3/16 x 2 (Use on 22 Gross HP Models only)
Position : 12
1 DECAL, Danger, Hand Under Deck
Position : 12
1 PIPE, Exhaust (Single)
Position : 13
1 ARM, Control
Position : 13
LEVER, Bypass
Position : 13
1 SPRING, Extension 07.52
Position : 13
1 BOLT, Carriage, 1/4-20 x 7/8
Position : 13
4 WASHER, Spring Black
Position : 13
2 WASHER
Position : 13
1 DECAL, Free Floating Mower
Position : 13
4 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 1/2
Position : 14
1 WASHER, Flat, 5/16
Position : 14
RING, Snap,
Position : 14
1 PULLEY, 3 OD Plastic
Position : 14
1 NUT, Push On
Position : 14
2 COVER, Spring
Position : 14
1 CABLE, Lift w/Pin
Position : 14
1 CABLE, Lift w/Pin (Used on 46" & 52" Decks only)
Position : 14
2 SPACER, 3/4 ID x 1-1/4 OD x 1-5/8
Position : 14
2 DECAL, Danger, Rotating Blades (CE/Export)
Position : 14
1 SHAFT, Steering Gear & Spline Yellow
Position : 15
1 CLIP, Speed Wire
Position : 15
1 CAPSCREW, Hex Head, 5/16-18 x
Position : 15
SEALING CAP
Position : 15
2 NUT, Hex Flange, ESNA, 3/8-16
Position : 15
1 HOLD DOWN, Battery
Position : 15
1 POD, LH Cup Holder
Position : 15
2 WHEEL & TIRE ASSEMBLY, Rear 20"
Position : 15
2 WHEEL & TIRE ASSEMBLY, Rear 20" (Use on 20 Gross HP Model only)
Position : 15
2 WHEEL & TIRE ASSEMBLY, Rear 22" (Use on Model 2690840)
Position : 15
1 CONTROL, Throttle Double (Single)
Position : 16
1 CONTROL, Throttle, Choke-A-Matic (Twin)
Position : 16
1 STRAP, Torque 7 GA
Position : 16
RING, Snap, C
Position : 16
1 BOLT, Carriage, 5/16-18 x
Position : 16
1 SWITCH, Push Button (NC)
Position : 16
1 ELBOW FITTING
Position : 16
1 ROD, Lift
Position : 16
1 TIRE, Turf 20 X 8.00 - 8 Saver TL
Position : 16
2 TIRE, 20 x 830-8, 2 Ply, K358 (Use 7101560)
Position : 16
2 TIRE, 22 x 10.00-8, 2 Ply, K358
Position : 16
4 SCREW, Hex Washer Head, Taptite
Position : 17
2 CLAMP, Hose
Position : 17
1 WASHER, Plain, 5/16
Position : 17
SEAL WASHER
Position : 17
1 PULLEY, Idler
Position : 17
3 TIE, Self Locking 7-5/16
Position : 17
1 BUSHING
Position : 17
1 TUBE, Tire, Rear (Use on 20" Tire)
Position : 17
2 TUBE, Tire, Rear (Use on 22" Tire)
Position : 17
1 HOSE, Fuel
Position : 18
1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4
Position : 18
1 SPRING, Extension
Position : 18
1 OUTLET, 12 Volt DC Power
Position : 18
1 TANK, Fuel
Position : 18
1 WHEEL, Hub
Position : 18
2 CLIP, Hose
Position : 19
4 NUT, Hex Flange, Whiz Lock, 5/16-18
Position : 19
0-RING, 1A P10A
Position : 19
1 PIN, Cotter 3/32 x 3/4
Position : 19
1 PLUG, Hole Models W/O 12V Adapter
Position : 19
1 CAP, Gas
Position : 19
4 WASHER, Flat, 3/4 x 1-1/4 (Use on 22 Gross HP Models only)
Position : 19
3 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1 (Single)
Position : 20
SEAL TC
Position : 20
1 ROD, Brake, 15.1"
Position : 20
1 SWITCH, Push Button (NO/NC) (18.5 Gross HP & 20 Gross HP Models)
Position : 20
1 SWITCH, Push Button (NO/NC) (22 Gross HP Models)
Position : 20
1 PAD, Footrest L.H.
Position : 20
1 LOCKWASHER, External Tooth 3/8
Position : 21
1 SPRING, Extension 5-3/8"
Position : 21
4 NUT, Hex, Flange Whizlock, 5/16-18
Position : 21
2/4 CLIP, Hair Pin
Position : 21
1 WASHER, 3/8
Position : 22
SCREW, Tapping, 8 *
Position : 22
1 PEDAL, Brake Rubber
Position : 22
4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8
Position : 22
1 PAD, Footrest R.H.
Position : 22
12 PIN, Clevis
Position : 22
1 PIN, Quick
Position : 23
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27)
Position : 23
1 PULLEY & HUB ASSEMBLY, Engine
Position : 24
1 ROD, Brake Return, 12.60 LG
Position : 24
2 SOCKET ASSEMBLY
Position : 24
6 CAPSCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/2
Position : 24
1 QUADRANT, Lift
Position : 24
1 TIE, Self Locking
Position : 25
PIN 3 * 9.8
Position : 25
2 BULB, 1141-12V 21CP
Position : 25
2 CAPSCREW, Taptite, 5/16-18 x 5/8
Position : 25
1 DECAL, Mower Transport Lift
Position : 25
1 RETAINER, Clutch
Position : 26
1 ROD, Cruise Latch, 2.83 LG
Position : 26
1 REFLECTOR, Headlight
Position : 26
1 POD, RH Lift Quadrant
Position : 26
1 CARRIAGE BOLT, 1/4-20 x 5/8 G5
Position : 26
BOLT, 10 *
Position : 27
1 SPRING, Tension, Clutch
Position : 27
1 LENS, Headlight
Position : 27
1 GRIP, Lift
Position : 27
1 NUT, Hex Flange 1/4-20 Whiz Lock Large
Position : 27
1 CLUTCH, Electric OGURA (Used on Model Year 2008 and Prior)
Position : 28
1 CLUTCH, Electric OGURA (Used on Model Year 2009 and Later)
Position : 28
1 LATCH, Cruise
Position : 28
1 CLIP, Speed Wire (18.5 Gross HP & 20 Gross HP Models)
Position : 28
1 CLIP, Speed Wire (22 Gross HP Models)
Position : 28
1 WASHER, Hex
Position : 29
1 BOLT, Shoulder, 5/16-18 G5
Position : 29
1 NUT, Hex, Flange, 1/4-20
Position : 29
1 LOCKWASHER, Spring
Position : 30
1 CAPSCREW, Hex Head 7/16-20 x 3-1/2 G5
Position : 31
1 HARNESS, Wiring (Use with Clutch 1731275SM)
Position : 31
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models with 12 Volt Adapter)
Position : 31
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models without 12 Volt
Position : 31
1/2 WASHER, 3/8
Position : 31
1 GASKET, Exhaust
Position : 32
1 CABLE, Solenoid to Starter
Position : 32
4/1 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4
Position : 33
PUMP SHAFT
Position : 33
1 SOLENOID
Position : 33
1/2 WASHER, 5/16
Position : 33
2 CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G8
Position : 34
E-RING
Position : 34
2 SCREW, Taptite, 1/4-20 x 1/2
Position : 34
2 LOCKWASHER, Spring 5/16
Position : 35
BEARING, 6202C3
Position : 35
2 LOCKWASHER, External Tooth, 5/16
Position : 35
MOTOR HOUSING
Position : 36
2 NUT, Hex, 5/16-24 NF
Position : 36
2 PIVOT, Hood
Position : 37
1 PAD, Foot Pedal Forward
Position : 37
1 CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid
Position : 37
2 BOLT, Carriage, 5/16-18 x
Position : 38
KIT, Cylinder Block
Position : 38
2 NUT, Hex Flange, 5/16-18
Position : 39
WASHER, 12 * 24 *
Position : 39
1 SUPPORT, RMO Switch
Position : 39
MOTOR SHAFT
Position : 40
2 BOLT, Carriage, 5/16-18 x 3/4
Position : 40
RING, Snap, S15
Position : 41
1 BOOT, Insulator
Position : 41
BRAKE DISC/MOTOR GEAR (10T)
Position : 42
1 BATTERY, 12 Volt, 230 CCA
Position : 42
1 SWITCH, Push Button (NO), Reverse Pedal
Position : 43
THRUST METAL
Position : 44
2 NUT, Hex, Full, 1/4-20
Position : 44
2 LOCKWASHER, 1/4
Position : 45
THRUST BEARING K81105
Position : 46
2 WASHER, 1/4 I.D.
Position : 46
1 CABLE, Battery to Ground
Position : 47
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position : 48
1 FUSE, Wiring Harness
Position : 49
1 SWITCH, RMO Module Only
Position : 50
2 KEY, RMO Module, Plastic
Position : 51
1 SWITCH, PTO, Push/Pull Symbols
Position : 52
CONTROL LEVER C
Position : 53
1 WIRING ASSEMBLY, All Conditions Shutdown (CE/Export)
Position : 53
WASHER,
Position : 55
COTTER PIN, 1/8 * 3/4
Position : 56
SPRING PIN 6 *
Position : 57
ROLL PIN 6 *
Position : 58
O-RING 1A P14
Position : 59
NUT
Position : 60
WASHER, 12 * 32 * 3.2
Position : 65
REDUCTION GEAR (38T)
Position : 66
AXLE SHAFT, Left
Position : 68
AXLE SHAFT, Right
Position : 69
THRUST WASHER
Position : 70
RING
Position : 71
SEAL 19 * 32 *
Position : 72
BUSHING, 19 *
Position : 73
BRAKE SHOE
Position : 75
BRAKE LEVER
Position : 76
BRAKE ACTUATOR
Position : 79
SPRING PIN 5 *
Position : 80
O-RING 1A P12
Position : 81
SPRING PIN 4 *
Position : 82
PULLEY D
Position : 84
FAN, White
Position : 85
WASHER, Wave
Position : 86
RING, Snap
Position : 87
OIL SEAL 16 * 22 * .03
Position : 91
* K46 & T40 SEAL KIT (ALL MODELS)
Position : 200