Vue éclatée regent 18 m Simplicity regent-18m
Découvrez la vue éclatée complète regent 18 m Simplicity regent-18m, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre regent 18 m. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre regent 18 m Simplicity regent-18m et éviter les pannes imprévues.
Assistant réparation
Powered by ChatGPT
Liste des pièces détachées
1 FRAME ASSEMBLY
Position : 1
1 STEERING WHEEL
Position : 1
1 VALVE-SHUT OFF
Position : 1
1 VALVE-SHUT OFF
Position : 1
1 DUCT, Air
Position : 1
1 KNOB
Position : 1
5 WASHER
Position : 1
2 SNAP RING
Position : 1
1 SNAP RING
Position : 1
1 KNOB
Position : 1
1 WIRE ASSEMBLY (G & H/C)
Position : 1
1 WIRE ASSEMBLY (Hydro)
Position : 1
1 WIRE ASSEMBLY (H/C w/Elec Clutch)
Position : 1
1 ELBOW
Position : 1
1 SEAT
Position : 1
1 SEAT ASSEMBLY
Position : 1
2 WHEEL & TIRE ASSEMBLY, Rear 18 x 8-1/2-8
Position : 1
2 WHEEL & TIRE ASSEMBLY, Rear 20 x 8-8
Position : 1
1 DECAL, Transmission Release Valve
Position : 1
2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G8
Position : 1
3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 1
2 NUT, Hex, Flange, 9/16-8
Position : 1
1 NUT, Hex Lock Esna Light, 3/8-16
Position : 1
2 CLIP, Hair Pin, 1/8 x
Position : 1
1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8
Position : 1
1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8
Position : 1
1 V-BELT, Arbor Drive
Position : 1
2 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 1
3 NUT, Hex, Flange, 9/16-8
Position : 1
1 PLUG, Hole
Position : 2
1 CAP
Position : 2
1 LOCKWASHER, External Tooth 3/8
Position : 2
1 ROD
Position : 2
2 SPLINE COLLAR
Position : 2
1 PULLEY D
Position : 2
1 ROD, Parking Brake
Position : 2
1 TUBE, Shrink
Position : 2
1 BUSHING
Position : 2
2 WASHER
Position : 2
2 NUT, Hex Nylon Lock, 5/16-18
Position : 2
2 WHEEL & TIRE ASSEMBLY, Front 15 x 6-6
Position : 2
2 WHEEL & TIRE ASSEMBLY, Front 15 x 6-1/2-6
Position : 2
1 DECAL, USA Logo
Position : 2
4 WASHER, Plain, 3/8
Position : 2
1 BRACKET, Upstop
Position : 2
4 WASHER, Belleville
Position : 2
5 WASHER, 3/8
Position : 2
6 WASHER, 3/8
Position : 2
5 WASHER, 5/16
Position : 2
1 WASHER, 7/16
Position : 2
1 CAPSCREW, Hex Head, 3/8-16 x 2-1/2
Position : 2
1 BRACKET, Upstop
Position : 2
6 WASHER, Belleville
Position : 2
1 PAD, Footrest RH
Position : 3
1 TUBE
Position : 3
1 SEAL, Foam
Position : 3
1 NUT, Hex 3/8-16
Position : 3
1 HOSE, Fuel
Position : 3
2 PIN, Cotter
Position : 3
1 LOCKWASHER
Position : 3
1 LOCK WASHER
Position : 3
1 SPRING, Extension
Position : 3
1 NUT, Hex Flange, Whiz Lock, 1/4-20
Position : 3
1 TANK, Fuel
Position : 3
4 CARRIAGE BOLT, 5/16-18 x 3/4
Position : 3
2 WASHER,5/16
Position : 3
4 WASHER, 3/4
Position : 3
1 DECAL, Drive Belts, Mower Blades
Position : 3
1 GUARD, Spring
Position : 3
2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
Position : 3
1 PULLEY, LH, 4" OD
Position : 3
1 PULLEY, Idler
Position : 3
4 WASHER, Spring
Position : 3
3 WASHER, 3/8
Position : 3
2 PULLEY, RH Arbor & LH Arbor, 41/2
Position : 3
1 PAD, Footrest LH
Position : 4
1 PIN, Spring
Position : 4
1 FILTER, Fuel
Position : 4
1 SEAL, Foam
Position : 4
1 KNOB
Position : 4
2 WASHER
Position : 4
2 NUT, Hex 5/16-18
Position : 4
1 PULLEY
Position : 4
1 LEVER, Parking
Position : 4
1 SWITCH, Neutral Safety
Position : 4
1 CAP, Fuel Tank
Position : 4
2 SCREW, Flat Head, 5/16-18 x 1-1/4
Position : 4
2 SPRING, Seat
Position : 4
4 CAP, Hub
Position : 4
1 DECAL, Operating Instructions (DOM)(Simplicity)
Position : 4
1 DECAL, Operating Instructions (CE)(Simplicity)
Position : 4
1 DECAL, Operating Instructions (CE)(Simplicity)
Position : 4
1 DECAL, Operating Instructions (CE)(Simplicity)
Position : 4
1 DECAL, Operating Instructions (AGCO)
Position : 4
1 DECAL, Operating Instructions (CE) (AGCO)
Position : 4
1 DECAL, Operating Instructions (AGCO)
Position : 4
1 DECAL, Operating Instructions (AGCO)
Position : 4
1 DECAL, Operating Instructions (AGCO)
Position : 4
1 DECAL, Operating Instructions (AGCO)
Position : 4
1 DECAL, Operating Instructions (AGCO)
Position : 4
1 SPACER
Position : 4
8 WASHER, 5/16
Position : 4
1 NUT, Hex, 5/16-18
Position : 4
1 V-BELT, Arbor Drive
Position : 4
1 SHAFT & BAR ASSEMBLY, 40" Roller
Position : 4
1 CAPSCREW, Hex Head, 7/16-14 x 4-1/2 G8
Position : 4
1 PULLEY ASSEMBLY, 5 OD
Position : 4
1 HUB, Adapter, LH
Position : 4
12 FASTENER, Panel
Position : 5
1 SHAFT & PINION ASSEMBLY
Position : 5
2 CLAMP, Hose Type E
Position : 5
2 CAPSCREW, Hex Washer Head, 1/4-14 x 5/8
Position : 5
1 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
Position : 5
2 LOCKWASHER, 5/16
Position : 5
1 FAN
Position : 5
1 WASHER, 1/4
Position : 5
1 COVER, Terminal
Position : 5
1 STRAP
Position : 5
2 SPRING, Compression
Position : 5
1 PLATE, Spring Support
Position : 5
4 WASHER, 3/4
Position : 5
3 DECAL, Simplicity
Position : 5
1 PULLEY ASSEMBLY KIT, (Includes Ref. No. 4)
Position : 5
1 CLIP, Spring
Position : 5
2 HUB
Position : 5
1 BELT GUIDE
Position : 5
4 ROLLER
Position : 5
1 PULLEY
Position : 5
1 BRACKET, U
Position : 5
3 COVER, Arbor Housing
Position : 5
4 NUT, Speed 5/16-18
Position : 6
2 CARRIAGE BOLT, 3/8-16 x
Position : 6
1 HOSE, 12~ Long
Position : 6
1 FUEL FILTER
Position : 6
1 STOP, Bel
Position : 6
3 RING
Position : 6
3 RING E
Position : 6
2 BUSHING, 21/32, Nylon
Position : 6
1 CLIP, Tinnerman
Position : 6
1 FASTENER, Panel
Position : 6
6 NUT, Hex Head Whiz Lock, 5/16-18
Position : 6
2 CARRIAGE BOLT, 5/16-18 x 3/4
Position : 6
4 E RING
Position : 6
1 DECAL, Touch up Paint (Simplicity, AGCO)
Position : 6
1 DECAL, Touch up Paint (Massey)
Position : 6
1 GRIP, Lever
Position : 6
1 ROD, Transport
Position : 6
2 COVER, Arbor Housing
Position : 6
2 WASHER, 3/8
Position : 6
6 ROLLER
Position : 6
1 HUB
Position : 6
3 BEARING, Upper
Position : 6
1 J HOOK, Hitch
Position : 7
1 PLATE, Mounting
Position : 7
1 NUT-HEX LOCK 10-24 W/NYL INSRT NC3B BLK
Position : 7
1 CABLE, Control Throttle, 14"
Position : 7
1 BRACKET, Switch
Position : 7
1 PUMP SHAFT
Position : 7
1 CARRIAGE BOLT, 3/8-16 x 2-1/4
Position : 7
2 CAPSCREW, Round Head, Phillips, #4 - 40 x 3/4
Position : 7
2 NUT, Hex Lock, 5/16-18
Position : 7
2 BAR
Position : 7
6 NUT, Hex Flange Whiz-Lock, 5/16-18
Position : 7
1 DECAL, Patent
Position : 7
4 BEARING
Position : 7
1 ARM ASSEMBLY, Idler with Bushings & Fitting
Position : 7
1 ARM ASSEMBLY, Idler with Bushings & Fitting, 38 Tooth
Position : 7
14 WASHER, 5/8
Position : 7
2 SPROCKET & FLANGE ASSEMBLY, Riveted
Position : 7
2 SPROCKET & FLANGE ASSEMBLY, Riveted, 38 Tooth
Position : 7
1 ARM, Idler
Position : 7
3 SPACER, Sleeve, Upper Bearing
Position : 7
4 SCREW, Hex Head Flange Lock, 5/16-18 x 3/4
Position : 8
2 NUT, Hex Head Whiz Lock, 3/8-16
Position : 8
1 KNOB, Slot
Position : 8
1 HOSE, 12" Long
Position : 8
1 LOCKWASHER, External Tooth, 3/8
Position : 8
1 LOCKWASHER, 5/16
Position : 8
1 SEAL
Position : 8
1 SEAL TC
Position : 8
1 ARM, Idler
Position : 8
1 LOCKWASHER, Internal Tooth, 5/8
Position : 8
A/R WASHER, 1/4 (2 used for Hood, A/R for Bulkhead)
Position : 8
6 CAPSCREW, Hex Head Whiz Lock Flange, 5/16-18 x 3/4
Position : 8
8 CAPSCREW, Hex Head Whiz Lock, 5/16-18 x 3/4
Position : 8
1 DECAL, PTO Control
Position : 8
2 WASHER, 1/2
Position : 8
2 SPACER
Position : 8
1 CARRIAGE BOLT, 3/8-16 x
Position : 8
1 SPACER
Position : 8
2 SHIELD, Arbor Bearing, Upper
Position : 8
1 LOCKWASHER, Spring, 3/8
Position : 8
3 SPACER, Arbor, Internal
Position : 8
1 WRAPPER ASSEMBLY, Hydro
Position : 9
1 BUSHING
Position : 9
1 SCREW-PAN HD PHILLIPS#10-24X1.000 BLK
Position : 9
1 VALVE, Shut Of
Position : 9
1 V-BELT
Position : 9
1 RING, Snap
Position : 9
1 RING, SNAP C
Position : 9
1 PULLEY, Backside, Idler, 3-1/4 OD
Position : 9
3 WASHER, 5/8
Position : 9
1 BULKHEAD & TUBE ASSEMBLY, Electric PTO
Position : 9
1 BULKHEAD & TUBE ASSEMBLY, Manual PTO
Position : 9
1 DECK, Seat
Position : 9
1 PAN, Seat
Position : 9
1 DECAL, Regent
Position : 9
1 SPRING, Idler Arm
Position : 9
2 NUT, Hex Lock, 5/16-18
Position : 9
2 GASKET, Foam
Position : 9
1 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G8
Position : 9
2 HOUSING, Arbor Top
Position : 9
3 BEARING, Lower
Position : 9
2 CAPSCREW, Hex Head, 1/2-13 x 1/2
Position : 10
5 WASHER
Position : 10
2 CAPSCREW, Hex Washer Head 1/4-14 x 5/8
Position : 10
2 WASHER, 7/16
Position : 10
1 BEARING
Position : 10
1 BEARING 6202C3
Position : 10
1 SPRING, Extension
Position : 10
1 NUT, Hex, Flange, 5/8-32
Position : 10
6 NUT, Speed
Position : 10
2 NUT, Speed 5/16-18
Position : 10
2 BAR, Seat Pivot
Position : 10
1 DECAL, 18HP (Simplicity)
Position : 10
1 DECAL, 15HP (AGCO)
Position : 10
1 DECAL, 16HP (AGCO)
Position : 10
1 DECAL, 17HP (AGCO)
Position : 10
1 DECAL, 518 (AGCO)
Position : 10
1 DECAL, 2518 (Massey)
Position : 10
1 NUT, ESNA Hex Lock, 3/8-16
Position : 10
1 U-BRACKET
Position : 10
2 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 11)
Position : 10
6 WASHER, 3/8
Position : 10
1 CLIP, Hair Pin
Position : 10
2 GASKET, Foam Poly
Position : 10
1 NUT, Hex Flange Lock, 3/8-16
Position : 10
1 ARM, Rear
Position : 10
3 GASKET, Foam
Position : 10
3 WASHER
Position : 11
1 NUT, Hex Lock, 5/16-18
Position : 11
1 CABLE, Throttle Control
Position : 11
2 STOP, Belt
Position : 11
1 SEALING CAP
Position : 11
1 ROD, Brake
Position : 11
1 COVER, Ignition
Position : 11
4 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
Position : 11
1 KNOB
Position : 11
1 SEAT DECK, Orange
Position : 11
1 DECAL, Stripe L.H. (Simplicity)
Position : 11
1 DECAL, Stripe L.H. (AGCO)
Position : 11
1 DECAL, Stripe L.H. (Massey)
Position : 11
2 WASHER , 3/8
Position : 11
1 CARRIAGE BOLT, 5/16-18 x 1-1/4
Position : 11
2 FITTING, Grease
Position : 11
1 SPRING, Extension, Idler Arm
Position : 11
2 ARBOR SHAFT & BEARINGS ASSEMBLY
Position : 11
1 SPRING, Idler Arm
Position : 11
3 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 12)
Position : 11
1 SPACER
Position : 12
2 WASHER
Position : 12
4 WASHER, 5/16
Position : 12
2 MAGNET
Position : 12
2 K50 MAGNET
Position : 12
1 GUIDE BELT & STUD ASSEMBLY
Position : 12
1 SWITCH, Ignition, 6-Pole (Includes Ref. 8, 9, 10, 11 & 13)
Position : 12
4 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
Position : 12
1 SUPPORT & PIN ASSEMBLY
Position : 12
2 SPEED NUT, Tinnerman Lug Type, 5/16-18
Position : 12
1 DECAL, Stripe R.H. (Simplicity)
Position : 12
1 DECAL, Stripe R.H. (AGCO)
Position : 12
1 DECAL, Stripe R.H. (Massey)
Position : 12
2 BUSHING, 5/8, Nylon
Position : 12
1 ARM, Rear
Position : 12
1 STOP, Belt, LH
Position : 12
1 SPACER, Hardened
Position : 12
2 NUT, Hex Centerlock 5/16-18
Position : 12
2 HOUSING, Arbor Bottom with Lube Fitting
Position : 12
1 NUT, Hex, Center Lock, 3/8-16
Position : 12
1 QUADRANT, 44"
Position : 12
3 FITTING, Grease
Position : 12
2 NUT, Hex Head, 1/2-13
Position : 13
2 BUSHING
Position : 13
1 CABLE, Choke, 16~ Long
Position : 13
1 CABLE, Throttle Control
Position : 13
4 LOCKWASHER, 5/16
Position : 13
1 HOLDER, Magnet
Position : 13
1 HOLDER MAGNET
Position : 13
1 SPACER
Position : 13
1 IGNITION KEY (Set of 2)
Position : 13
1 CLAMP & SCREW ASSEMBLY
Position : 13
3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 5/8
Position : 13
1 DECAL, Simplicity, Icon
Position : 13
2 DECAL, AGCO
Position : 13
2 DECAL, Massey Ferguson
Position : 13
1 FITTING, Grease
Position : 13
2 CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/2
Position : 13
4 NUT, Hex, Whiz Lock, 5/16-18
Position : 13
1 GRIP, Black Vinyl for Handle
Position : 13
6 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/2
Position : 13
6 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 13
2 WASHER, 3/8
Position : 13
1 COVER, Arbor LH
Position : 13
1 CARRIER ASSEMBLY, Hydro
Position : 14
4 RING, Clipring Extension
Position : 14
2 CAPSCREW, M08-1.25 x 40MM
Position : 14
1 VENT VALVE
Position : 14
1 NUT, Hex Flange, 5/16-18
Position : 14
1 SWITCH, Seat
Position : 14
2 MOLDING
Position : 14
1 CLAMP, Wire (Middle Bolt Only)
Position : 14
2 DECAL, 515 (AGCO)
Position : 14
2 DECAL, 516 (AGCO)
Position : 14
2 DECAL, 517 (AGCO)
Position : 14
1 BRACKET, Decal
Position : 14
2 CARRIAGE BOLT, 1/4-20 x 1-1/4, (CE)
Position : 14
1 CAPSCREW, Hex Head, 3/8-16 x 2-1/4
Position : 14
4 WASHER, 5/16
Position : 14
1 COVER, Arbor, LH
Position : 14
1 SPACER, Idler Arm
Position : 14
28 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 14
1 SPACER
Position : 15
1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
Position : 15
1 CABLE, Choke, 16" Long
Position : 15
2 CAPSCREW, M08-1.25 x 30MM
Position : 15
1 CAPSCREW, Hex Head, 5/16-18 x
Position : 15
1 PIN
Position : 15
1 PIN 5*32
Position : 15
5 NUT, Hex Lock, 5/16-18
Position : 15
1 WIRE ASSEMBLY
Position : 15
1 DASHBOARD
Position : 15
3 WASHER, 5/16
Position : 15
1 SPACER
Position : 15
1 DECAL, Height
Position : 15
1 PULLEY
Position : 15
7 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
Position : 15
1 HOUSING ASSEMBLY, 40", Orange
Position : 15
1 HOUSING ASSEMBLY, 40", Orange
Position : 15
1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
Position : 15
3 WASHER, Cup, 23/32
Position : 15
1 BAR, Torsion, Hydro
Position : 16
1 WASHER
Position : 16
3 WASHER
Position : 16
3 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 1-1/2
Position : 16
1 KEY
Position : 16
1 ARM, Brake
Position : 16
1 ARM BRAKE
Position : 16
1 WASHER, 5/16
Position : 16
1 CIRCUIT BREAKER
Position : 16
2 SPACER
Position : 16
3 WASHER, Plain
Position : 16
1 NUT, Hex Flange Lock, 3/8-16
Position : 16
1 ROD, Latch
Position : 16
1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1-3/4
Position : 16
1 SPACER
Position : 16
3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x
Position : 16
1 BLADE, Mower, LH
Position : 16
1 SHAFT, Arbor LH
Position : 16
1 NUT, Hex Toplock Spiralock Flange, 3/8-16
Position : 17
1 STEERING GEAR ASSEMBLY
Position : 17
2 STOP-BELT .213WIRE 3.12 ,0.75 BLK
Position : 17
1 PULLEY
Position : 17
5 NUT, Hex Flange Whizlock, 5/16-18
Position : 17
2 PIN, Spring
Position : 17
2 PIN SPRING 4*16
Position : 17
1 SPACER
Position : 17
2 CAPSCREW, Taptite Hex Washer Head, 1/4-20 x 5/8
Position : 17
2 CAPSCREW, Hex Head, 1/4 - 20 x 1-1/2
Position : 17
3 SPACER
Position : 17
2 WASHER, Plain, 3/8
Position : 17
1 CARRIAGE BOLT, 3/8-16 x
Position : 17
2 WASHER
Position : 17
4 NUT, Hex Flange Whiz Lock, Large, 3/8-16
Position : 17
2 PIN, Blade
Position : 17
2 NUT, Hex Lock, Aluminum Insert, 3/8
Position : 17
3 SHIELD, Grass, Lower
Position : 17
1 WASHER
Position : 18
1 LINK, 19.66" Long
Position : 18
4 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 1-1/2
Position : 18
2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 3/8
Position : 18
4 WASHER
Position : 18
2 "O" RING
Position : 18
2 O-RING 1A P12
Position : 18
1 SPRING, Compression
Position : 18
1 CABLE, # 6 x 42-1/2 long (Solenoid to Starter)
Position : 18
1 PANEL, Hood, LH
Position : 18
2 EDGING, 3"
Position : 18
2 SPACER
Position : 18
1 ROCKER ARM ASSEMBLY
Position : 18
2 SHAFT, Arbor
Position : 18
2 CAPSCREW, Hex Head, 3/8-16 x 1-1/2
Position : 18
1 PIVOT, 3/4 Hex
Position : 18
2 ADAPTOR, Arbor
Position : 18
1 WASHER, 3/8
Position : 18
1 CAPSCREW, Hex Head Taptite, 5/16-18 x 7/8
Position : 18
3 BLADE, Mower, 16-1/8
Position : 18
6 BUSHING
Position : 19
3 NUT, Hex Flange Lock, 3/8-16
Position : 19
1 WASHER-HEX 0.453ID X 1.500A/F .250TH BLK
Position : 19
1 WASHER, Hex, 7/16
Position : 19
6 SPACER
Position : 19
1 RETURN SPRING
Position : 19
1 RETURN SPRING B
Position : 19
3 WASHER, 5/16
Position : 19
1 SOLENOID
Position : 19
1 PANEL, Hood, RH
Position : 19
4 BOLT, Shoulder, 5/16-18 x 3/4
Position : 19
2 CAPSCREW, Hex Head, 3/8-16 x 1-3/8
Position : 19
1 NUT, Hex Lock, 1/4-20
Position : 19
2 SHIELD, Grass, Lower
Position : 19
2 SPACER
Position : 19
2 WASHER, 3/8
Position : 19
2 WASHER, Spline
Position : 19
3 WASHER, Hex
Position : 19
1 SPACER
Position : 20
1 CARRIAGE BOLT, 5/16-18 x
Position : 20
1 LOCKWASHER, 7/16
Position : 20
1 SLEEVE, Clutch Anchor
Position : 20
2 KEY
Position : 20
2 BUSHING
Position : 20
2 BUSHING 19.05
Position : 20
1 SPACER
Position : 20
2 NUT, Hex, 1/4-20
Position : 20
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 22, 23, 24 & 25)
Position : 20
2 SIDE PANEL, Seat Slide
Position : 20
1 HITCH
Position : 20
2 NUT, HEx Lock ESNA, 3/8-16
Position : 20
1 BLADE, Mower, 16-1/8
Position : 20
2 CAPSCREW, Hex Head, 7/16-14 x 2-1/4 G8
Position : 20
3 WASHER, Spring
Position : 20
1 CAPSCREW, Hex Head, 3/8-16 x 3, G8
Position : 21
1 ARM & SPACER ASSEMBLYMY, LH Splined
Position : 21
1 CAPSCREW, 7/16-20 x
Position : 21
1 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x
Position : 21
4 NUT, Speed, 5/16-18
Position : 21
8 CAPSCREW, Hex Head Taptite, 5/16-18 x 2-1/2
Position : 21
2 SEAL
Position : 21
2 SEAL 19*32*8
Position : 21
1 STOP, Belt
Position : 21
2 LOCKWASHER, 1/4
Position : 21
2 SOCKET, Light
Position : 21
1 SLIDE, Seat
Position : 21
1 ROD, Mower Hitch
Position : 21
1 STRAP
Position : 21
1 BLADE, Mower, 22-1/4
Position : 21
1 SPRING, Extension, Hitch Release
Position : 21
1 BRACKET, Adjusting
Position : 21
12 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 21
12 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x
Position : 21
1 NUT, Hex Lock, ESNA, 3/8-16
Position : 21
3 CAPSCREW, Hex, Head, 7/16-14 x 1-1/4
Position : 21
2 WASHER
Position : 22
1 CLUTCH-ELECTRIC REGENT,BROADMOOR OGURA
Position : 22
1 TIE, Wire
Position : 22
1 ANCHOR, Torsion Bar LH
Position : 22
1 SHAFT, Brake
Position : 22
1 SHAFT BRAKE
Position : 22
1 NUT, Hex Head Whiz Lock, 3/8-16
Position : 22
2 LOCKWASHER, External Tooth, 5/16
Position : 22
1 BEZEL, Housing
Position : 22
1 PlATE, Seat Rear
Position : 22
1 ROD, Latch
Position : 22
1 ECCENTRIC
Position : 22
2 WASHER, Hex
Position : 22
2 CARRIAGE BOLT, 5/16-18 x
Position : 22
2 WASHER, Shim
Position : 22
1 ARM ASSEMBLY, Rocker
Position : 22
1 SHAFT, Arbor (RH)
Position : 22
1 PIN, Cotter
Position : 23
1 TIE-SELF LOCKING .184WD 7.31LG BLACK ZY
Position : 23
1 CLUTCH, Electric
Position : 23
1 CAPSCREW, Hex Head Flange Whizlock, 5/16-18 x 1-3/4
Position : 23
1 SHOE, Brake
Position : 23
1 SHOE BRAKE
Position : 23
1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4
Position : 23
1 CABLE, # 6 x 10 Long, with 2 Ring Terminals
Position : 23
2 BULB, #1156
Position : 23
1 CAP, Seat Adjust
Position : 23
1 NUT, Push, 1/2
Position : 23
1 WASHER, Flat, 5/16
Position : 23
2 WASHER, Spring
Position : 23
1 HITCH, Mower
Position : 23
5 NUT, Hex Flange Lock, 5/16-18
Position : 23
5 NUT, Hex Flange Lock, 5/16-18
Position : 23
2 SHIELD, Arbor Bearing, Lower
Position : 23
2 STRAP
Position : 23
1 HOUSING ASSEMBLY, Orange
Position : 23
2 SPINDLE & CUP ASSEMBLY
Position : 24
6 NUT, Speed 5/16-18
Position : 24
1 POD, Control Pod
Position : 24
1 ACTUATOR, Brake
Position : 24
1 ACTUATOR BRAKE
Position : 24
1 BOOT, Insulator
Position : 24
1 LENS, Headlight
Position : 24
1 LEVER, Seat Latch
Position : 24
1 SPRING, Hitch Release
Position : 24
2 CAPSCREW, Taptite Hex Washer Head, 5/61-18 x 7/8
Position : 24
2 CAPSCREW, Hex Head, 7/16-14 x -1/4
Position : 24
1 NUT, Push
Position : 24
1 CARRIAGE BOLT, 5/16-18 x 1-1/4
Position : 24
2 ADAPTER, Blade
Position : 24
1 COVER, Arbor (RH)
Position : 24
2 SPACER
Position : 25
1 DUCT, Muffler
Position : 25
1 SPRING
Position : 25
1 TRANSMISSION ASSEMBLY
Position : 25
1 CENTER CASE
Position : 25
1 CENTER CASE E CMP
Position : 25
1 PULLEY, Idler, 3 OD
Position : 25
2 NUT, Hex, 5/16-24 NF
Position : 25
6 NUT, Hex Lock, 1/4-20
Position : 25
1 SPRING, Extension
Position : 25
1 CLUTCH LEVER ASSEMBLY w/ BUSHINGS, (Includes Ref. Nos. 12, 13, and 14)
Position : 25
3 NUT, Hex, Flange Collar Lock, 5/16-18
Position : 25
7 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 25
2 NUT, Hex Lock ALUM Insert, 3/8-16
Position : 25
1 ARM, 1 1/4
Position : 25
1 DEFLECTOR, Discharge
Position : 25
1 ROD
Position : 26
2 CAPSCREW, Hex Flange Lock, 5/16-18 x 1-1/4
Position : 26
1 DUCT, Muffler Lower
Position : 26
1 LINK, Transmission
Position : 26
1 PIN
Position : 26
1 PIN 3*9.8
Position : 26
2 PIN, Cotter, 1/8 X 3/4
Position : 26
2 WASHER, Plain, 1/4
Position : 26
1 GRILLE
Position : 26
1 V-BELT, Arbor Drive
Position : 26
2 NUT, Hex Lock, Aluminum Insert, 3/8-16
Position : 26
1 MOWER DECK HOUSING, 38", Orange
Position : 26
1 WASHER & NUT ASSEMBLY, 3/8 x 1-1/2
Position : 26
1 CAM, Eccentric 1 1/8 Hex
Position : 26
1 BLADE, Mower, RH
Position : 26
6 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4
Position : 26
2 NUT, Push
Position : 26
1 ARM & SPACER ASSEMBLY, RH
Position : 27
2 PIVOT
Position : 27
2 CAPSCREW, Hex Head Flange Lock, 5/16-18 x 1-1/4
Position : 27
1 TRANSMISSION ASSEMBLY
Position : 27
3 BOLT
Position : 27
3 BOLT 10*75
Position : 27
2 WASHER, 5/16
Position : 27
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position : 27
2 HINGE
Position : 27
2 NUT, Hex Lock Aluminum Insert, 3/8-16
Position : 27
1 CAPSCREW, Hex Head Taptite, 5/16 x 7/8
Position : 27
2 CARRIAGE BOLT, 1/4-20 x 7/8
Position : 27
2 CARRIAGE BOLT, 1/4-20 x 1-1/4, (6 Total for CE)
Position : 27
1 SPRING, Extension
Position : 27
1 WASHER, 5/16
Position : 27
2 NUT, Hex Flange Collar Lock, 5/16-18
Position : 27
2 WASHER, Plain, 1/4
Position : 27
1 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4
Position : 28
2 SPACER
Position : 28
1 ANCHOR, Torsion Bar RH
Position : 28
1 FILTER
Position : 28
1 FILTER K50 SNP
Position : 28
4 CARRIAGE BOLT, 5/16-18 x 3/4
Position : 28
1 WASHER, Plain, 5/16
Position : 28
2 SPACER
Position : 28
1 NUT, Adjuster
Position : 28
1 DEFLECTOR, Plastic
Position : 28
1 ARM, Idler
Position : 28
5 NUT, Hex Collar Lock, 5/16-18
Position : 28
1 CARRIAGE BOLT, 1/4-20 x 7/8
Position : 28
2 CARRIAGE BOLT, 3/8-16 x 1-1/4
Position : 29
2 WASHER
Position : 29
2 PIN, Cotter
Position : 29
1 WASHER
Position : 29
1 WASHER 12*24*1
Position : 29
1 CLAMP
Position : 29
1 NUT, Hex Nylon Lock, 5/16-18
Position : 29
2 PIN, Quick
Position : 29
4 SPACER
Position : 29
2 NUT, Push On
Position : 29
2 HUB
Position : 29
2 FASTENER, Panel
Position : 29
1 NUT, Push
Position : 29
2 SPACER, 1-1/4 x 5/8
Position : 29
1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2
Position : 30
4 CAPSCREW, Hex Flange Lock, 5/16-18 x 3/4
Position : 30
1 ROD
Position : 30
1 CYLINDER BLOCK
Position : 30
1 ROD, Clutch
Position : 30
1 ROD, Battery Hold Down
Position : 30
6 CAPSCREW, Hex Head Flange Lock, 1/4-20 x 5/8
Position : 30
1 BAR, Roller, Support
Position : 30
6 CARRIAGE BOLT, 1/4-20 x 1-1/4, (CE)
Position : 30
2 PULLEY, Idler, 22 Teeth
Position : 30
2 PULLEY, Idler
Position : 30
1 SHAFT ASSEMBLY, Rocker
Position : 30
1 SHAFT ASSEMBLY, Rocker
Position : 30
2 WASHER, 1/4
Position : 30
1 SPRING, Deflector Retaining
Position : 30
1 SPACER
Position : 31
1 DUCT,Muffler, Upper
Position : 31
1 INSULATION, Foam, 6 x 11-3/8
Position : 31
1 PULLEY & HUB ASSEMBLY
Position : 31
1 BEARING
Position : 31
1 PAD, Reverse Pedal
Position : 31
1 CAPSCREW, Hex Head, 5/16-18 x 3/4
Position : 31
1 HOOD-REGENT w/LOUVERS (ORANGE)
Position : 31
2 CAPSCREW, Hex Head, 5/16-18 x
Position : 31
1 CLAMP
Position : 31
2 CAPSCREW, Hex Head, 3/8-16 x
Position : 31
3 CAPSCREW, Hex Head, Taptite 5/16-18 x 7/8
Position : 31
1 SPACER
Position : 32
4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1/2
Position : 32
1 INSULATION, LH
Position : 32
2 CAPSCREW, Hex Head Flange Lock, 5/16-18 x 3/4
Position : 32
1 KEY
Position : 32
1 NUT, Hex Two Way Lock, 5/16-18
Position : 32
1 HOUSING
Position : 32
1 PAD, Brake Pedal
Position : 32
1 BATTERY
Position : 32
1 DUCT, Cooling
Position : 32
2 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x
Position : 32
1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/2
Position : 32
1 UPSTOP
Position : 32
1 LOCKWASHER, Spring 1/4
Position : 32
1 NUT, Hex Flange Lock, 5/16-18
Position : 33
2 CAPSCREW, Hex Washer Head, Taptite, 1/4-20 x 3/8
Position : 33
1 CAPSCREW, 5/16-18 X
Position : 33
2 NUT, Hex Two Way Lock, 5/16-18
Position : 33
1 CONTROL, Rod
Position : 33
1 SHAFT MOTOR
Position : 33
1 FOOT PEDAL & BRAKE ARM ASSEMBLY
Position : 33
1 CABLE, # 6 x 52-1/2 long (Battery to Ground)
Position : 33
2 PUSHNUT, 5/8"
Position : 33
1 SPRING
Position : 33
1 SPACER
Position : 33
8 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
Position : 33
1 NUT, Hex 1/4-20
Position : 33
1 SHAFT ASSEMBLY
Position : 33
1 MANIFOLD, Pipe L.H.
Position : 34
1 WASHER
Position : 34
1 DUCT, Muffler Upper
Position : 34
1 DUCT, Muffler Upper, (Export)
Position : 34
1 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
Position : 34
1 RING, SNAP
Position : 34
1 RING, SNAP S
Position : 34
1 PAD, Forward Pedal
Position : 34
1 TIE-SELF LOCKING (Qty 2 on Gear Models)
Position : 34
2 ROLLER, End
Position : 34
2 LOCKWASHER, 1/4
Position : 34
3 STRAP, Roller Support
Position : 34
1 DOOR, Mulching, Black Plastic
Position : 34
2 PUSHNUT, 5/8
Position : 34
1 * PLUG, Hole
Position : 34
1 MANIFOLD, Pipe R.H.
Position : 35
2 CAPSCREW, Hex Flange Lock, 5/16-18 x 3/4
Position : 35
4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1/2
Position : 35
1 CARRIAGE BOLT, 3/8-16 x 1-1/4
Position : 35
2 SPACER
Position : 35
1 BEARING
Position : 35
1 BEARING 6202C3U
Position : 35
1 HARNESS, Wiring
Position : 35
3 WASHER, 5/8
Position : 35
2 NUT, Hex, 1/4-20
Position : 35
1 BELT, Timing
Position : 35
1 BELT, Timing, 38 Tooth
Position : 35
1 NUT, Push 5/8
Position : 35
1 SPRING, Torsion
Position : 35
1 SPRING, Torsion
Position : 35
1 MUFFLER
Position : 36
1 INSULATION, RH
Position : 36
1 MUFFLER (Domestic)
Position : 36
1 MUFFLER (Export)
Position : 36
1 MOTOR GEAR
Position : 36
2 CLIP, Wire
Position : 36
8 ROLLER
Position : 36
1 ROD, Deflector, Front
Position : 36
1 BELT GUIDE
Position : 36
1 BAR, Roller
Position : 36
1 ROD, Pivot
Position : 36
7 WASHER, 5/8
Position : 36
1 HUB, Pulley, RH
Position : 36
1 INSULATION
Position : 37
1 SPACER
Position : 37
2 WASHER
Position : 37
2 WASHER 12*32*3.2
Position : 37
1 SWITCH, Neutral Start
Position : 37
1 SHAFT ASSEMBLY
Position : 37
1 PULLEY, RH, 5-1/4OD
Position : 37
1 NUT, Hex Aluminum Lock, 3/8-16
Position : 37
9 ROLLER
Position : 37
1 PULLEY, Arbor (Center)
Position : 37
1 PIPE, Manifold
Position : 38
1 WASHER
Position : 38
1 REDUCTION GEAR
Position : 38
1 MODULE, No-Mow
Position : 38
2 PIN
Position : 38
1 STOP, Belt, RH
Position : 38
1 SPACER
Position : 38
1 LOCKWASHER, Spring 5/16
Position : 38
1 HUB, Pulley (Center)
Position : 38
1 STRAP, Torque
Position : 39
1 NUT, Hex, 3/8-16
Position : 39
1 COLLAR, Fina
Position : 39
1 COLLAR, FINAL P
Position : 39
1 SWITCH, Pedal, N.O., Black
Position : 39
2 CLIP, Hair
Position : 39
4 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x
Position : 39
1 NUT, Hex Centerlock 3/8-16
Position : 39
1 SHAFT, Arbor (Center)
Position : 39
1 WASHER
Position : 40
1 LOCKWASHER, 3/8
Position : 40
1 FINAL PINION
Position : 40
1 SWITCH, Pedal, N.C., Gray
Position : 40
2 GAUGE WHEEL
Position : 40
2 PLUG, Plastic
Position : 40
1 BRACKET, Height of Cut
Position : 40
1 NUT, Push
Position : 40
2 CLIP, Hair Pin
Position : 40
3 * CAPSCERW, Hex Head, Taptite, 5/16-18 x 1/2
Position : 40
3 LOCKWASHER, 5/16
Position : 41
1 SEAL, Ring
Position : 41
1 PIN, Cotter
Position : 41
1 REDUCTION SHAFT
Position : 41
1 SWITCH
Position : 41
2 E-RING, 1/2
Position : 41
1 COVER ASSEMBLY, LH, (CE)
Position : 41
1 DECAL, Height of Cut
Position : 41
1 COVER, Arbor, RH
Position : 41
1 COVER, Arbor, RH
Position : 41
3 WHEEL, Gauge
Position : 41
3 * NUT, Hex Whiz Lock, 5/16-18
Position : 41
1 NUT, Hex 5/16-18
Position : 42
1 NUT, #10-24 Nylon
Position : 42
1 ROD
Position : 42
1 AXLE SHAFT
Position : 42
1 AXLE SHAFT L
Position : 42
2 ARM ASSEMBLY, Adjustable
Position : 42
3 CARRIAGE BOLT, 1/4-20 x 1-1/4, (CE)
Position : 42
1 ROD, Adjustment
Position : 42
1 CAP, Spring End
Position : 42
1 SCREW, #10-24
Position : 43
1 LEVER & CLEVIS ASSEMBLY
Position : 43
2 BUSHING
Position : 43
4 WASHER, Flat, 3/8
Position : 43
1 COVER ASSEMBLY, RH, (CE)
Position : 43
1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4
Position : 43
2 "E"-RING, 1/2
Position : 43
2 THRUST WASHER
Position : 44
1 SPACER
Position : 44
1 TRUNNION, Rod
Position : 44
1 MUFFLER
Position : 45
2 WASHER
Position : 45
2 RING
Position : 45
1 SPACER
Position : 45
2 NUT, Hex, 5/8-11
Position : 45
4 WASHER, 3/8
Position : 45
2 CAPSCREW, 5/16-18 x 3/4, G8
Position : 46
1 BRACKET, Switch
Position : 46
2 DIFFERNIAL PINION
Position : 46
2 DIFF PINION
Position : 46
1 CAPSCREW, Hex Head, 3/8-16 x
Position : 46
1 PIN
Position : 46
1 PIPE, Exhaust
Position : 47
2 CARRIAGE BOLT, 1/4-20 X 5/8
Position : 47
1 FINAL GEAR
Position : 47
1 ARM, Pitch
Position : 47
1 CLIP, Hair Pin, 1/8 x
Position : 47
1 ARM, Pitch
Position : 47
1 GASKET
Position : 48
2 NUT, Flange, Nylon 1/4-20
Position : 48
1 AXLE SHAFT R
Position : 48
1 LATCH
Position : 48
1 NUT, Hex Jam 3/8-16
Position : 48
2 PLUG
Position : 49
14 SCREW, Tapping
Position : 49
14 SCREW, TAPPING 8*30
Position : 49
1 CAPSCREW, Hex, 1/4-20 x 2-1/4
Position : 49
1 NUT, Hex Flange, 3/8-16
Position : 49
2 WASHER, Seal
Position : 50
2 WASHER, SEAL
Position : 50
2 WASHER
Position : 50
1 GUIDE ASSEMBLY, Rod
Position : 50
2 SCREW, Cap
Position : 51
2 SCREW, CAP 8*12
Position : 51
1 SPRING, Compression
Position : 51
1 ROD & WASHER ASSEMBLY, Adjust Handle
Position : 51
1 NUT, Hex Lock ESNA, 1/4-20
Position : 51
2 TAPPING SCREW
Position : 52
2 TAPPING SCREW 8*55
Position : 52
1 PUSH NUT, 1/4
Position : 52
1 GRIP, Black Vinyl For Rod
Position : 52
1 LOWER HOUSING
Position : 53
1 GRIP
Position : 53
1 NUT, Hex Lock Esna Light, 1/4-20
Position : 53
2 IDS SPRING
Position : 54
1 BUTTON
Position : 54
1 LATCH, 5/16 WIRE
Position : 54
2 BALL
Position : 55
2 BALL 3/16
Position : 55
1 HANDLE ASSEMBLY
Position : 55
1 CAPSCREW, Hex Head, 1/4-20 x 2-1/4
Position : 55
2 IDS VALVE
Position : 56
2 IDS VALVE 1.0
Position : 56
1 CARRIAGE BOLT, 3/8-16 x 1-1/2
Position : 56
1 ROD, Latch
Position : 56
1 PUSH NUT
Position : 56
1 SPRING PIN
Position : 57
1 SPRING PIN 6.0A*36
Position : 57
1 HANDLE ASSEMBLY, Lift
Position : 57
1 GRIP, Lift Lever
Position : 57
1 CONTROL ARM
Position : 58
1 COTTER PIN
Position : 58
1 SPRING, Compression
Position : 58
2 SPRING
Position : 59
1 CONTROL SHAFT
Position : 59
2 WASHER, 5/16
Position : 59
2 NUT, Hex, 5/16-18
Position : 59
1 CYLINDER BLOCK
Position : 60
1 SP (TORSION
Position : 60
1 GRIP, Black Soft for Rod
Position : 60
1 SPRING, Pump
Position : 61
1 CONTROL ARM E
Position : 61
1 BUTTON, Black Nylon for Rod
Position : 61
1 THRUST PLATE
Position : 62
1 JERKY PLATE
Position : 62
1 BEARING
Position : 63
1 FULCRUM (ECCENTRICIT
Position : 63
1 THRUST PLATE
Position : 64
1 SWASH PLATE
Position : 65
1 SPRING (PUMP)
Position : 65
2 THRUST METAL
Position : 66
1 RING
Position : 67
1 BEARING K81105
Position : 67
1 PLUG
Position : 68
1 OIL SEAL
Position : 69
1 SWASH PLATE CMP.
Position : 69
1 UPPER HOUSING
Position : 70
1 SHAFT, Bypass
Position : 71
2 "O" RING
Position : 72
1 SPRING
Position : 72
1 SPRING PIN
Position : 73
1 OIL SEAL 16*22*03
Position : 73
1 PIN
Position : 74
1 LEVER
Position : 75
2 O-RING 1A P14
Position : 75
1 CONTROL SHAFT
Position : 76
1 WASHER,
Position : 76
2 WASHER
Position : 77
1 NUT
Position : 77
2 FRICTION PLATE
Position : 78
1 PIN, ROLL 6*40
Position : 78
1 CONTROL LEVER
Position : 79
1 CONTROL LEVER
Position : 79
1 PIN, Roll
Position : 80
1 LEVER BYPASS
Position : 80
1 STUD BOLT
Position : 81
1 PIN 3.0A*20
Position : 81
1 COLLAR
Position : 82
1 SPRING PIN 3*16
Position : 82
1 SPRING, Friction
Position : 83
2 O-RING 1A P10A
Position : 83
1 WASHER
Position : 84
1 SHAFT (BYPASS)
Position : 84
1 LOCK NUT
Position : 85
38" Mower Deck
Position : 1693792
38" Mower Deck (CE)
Position : 1693794
44" Mower Deck
Position : 1693795
44" Mower Deck (CE)
Position : 1693885
38" Mower Deck
Position : 1693960
44" Mower Deck
Position : 1693961
40" Mower Deck
Position : 1694333
40" Mower Deck (CE)
Position : 1694334
40" Mower Deck (CE)
Position : 1694377
Regent, 18HP Hydro
Position : 1694656
Regent, 18HP Hydro (CE)
Position : 1694659
518H, 18HP Hydro
Position : 1694660
2518H, 18HP Hydro
Position : 1694665
Regent, 18HP Hydro
Position : 1694749
518H, 18HP Hydro
Position : 1694750
2518H, 18HP Hydro
Position : 1694751
Regent, 18HP Hydro (CE)
Position : 1694802