Vue éclatée Fischer snb6kp

Découvrez la vue éclatée complète Fischer snb6kp, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre . Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre Fischer snb6kp et éviter les pannes imprévues.

Assistant réparation Powered by ChatGPT

Liste des pièces détachées

1 HANDLE, Upper
1 HANDLE, Upper
Position : 1
1 ASSEMBLY, Discharge Door
1 ASSEMBLY, Discharge Door
Position : 1
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
Position : 1
1 AXLE/TRANSMISSION ASSY (Incl. items 2-19 & 24-28)
1 AXLE/TRANSMISSION ASSY (Incl. items 2-19 & 24-28)
Position : 1
1 DECAL, SNAPPER
1 DECAL, SNAPPER
Position : 1
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
Position : 1
1 HANDLE, Middle
1 HANDLE, Middle
Position : 2
1 BELT GUIDE (Wireform)
1 BELT GUIDE (Wireform)
Position : 2
2 WHEEL, 9.0 x 2.0 (Rear Drive) includes 73618 bushing
2 WHEEL, 9.0 x 2.0 (Rear Drive) includes 73618 bushing
Position : 2
1 TRANSMISSION ASSY, 3SP Commercial Waldes # 5133-50
1 TRANSMISSION ASSY, 3SP Commercial Waldes # 5133-50
Position : 2
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Position : 2
1 ASSEMBLY, Catcher Frame Was 53176 (Now 44915 +
1 ASSEMBLY, Catcher Frame Was 53176 (Now 44915 +
Position : 2
2 BRACKET, Handle
2 BRACKET, Handle
Position : 3
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position : 3
1 BUSHING, Wheel (PM)
1 BUSHING, Wheel (PM)
Position : 3
1 WELDMENT, Rear Axle Waldes # 5133-50
1 WELDMENT, Rear Axle Waldes # 5133-50
Position : 3
1 DECAL, Danger (Keep Hands and Feet Away)
1 DECAL, Danger (Keep Hands and Feet Away)
Position : 3
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
Position : 3
1 COTTER PIN, Bow Tie Locking
1 COTTER PIN, Bow Tie Locking
Position : 4
4 SCREW, 1/4-20 x 5/8” Phillips Truss Head Machine
4 SCREW, 1/4-20 x 5/8” Phillips Truss Head Machine
Position : 4
2 COTTER PIN, 3/8” Self Locking
2 COTTER PIN, 3/8” Self Locking
Position : 4
2 SHIELD, Dust
2 SHIELD, Dust
Position : 4
1 DECAL, Warning (International Symbol)
1 DECAL, Warning (International Symbol)
Position : 4
1 PLUG, Mulching MULCHING PARTS
1 PLUG, Mulching MULCHING PARTS
Position : 4
1 BAIL, OPC Control
1 BAIL, OPC Control
Position : 5
1 WELDMENT, Tie Bar
1 WELDMENT, Tie Bar
Position : 5
2 PAWL, 3/16” O.D.
2 PAWL, 3/16” O.D.
Position : 5
1 DECAL, Commercial, Walk-Behind Mower
1 DECAL, Commercial, Walk-Behind Mower
Position : 5
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 13010) DISCHARGING PARTS
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 13010) DISCHARGING PARTS
Position : 5
1 CLIP, Zone Control
1 CLIP, Zone Control
Position : 6
1 DECK, 21” Cast Aluminum Short (Red)
1 DECK, 21” Cast Aluminum Short (Red)
Position : 6
5 COTTER PIN, 1/8 x 3/4”
5 COTTER PIN, 1/8 x 3/4”
Position : 6
1 PINION, RH Drive
1 PINION, RH Drive
Position : 6
1 DECAL, Chute Deflector (Cast)
1 DECAL, Chute Deflector (Cast)
Position : 6
1 CABLE, Zone Control
1 CABLE, Zone Control
Position : 7
6 NUT, 1/4-20 Hex Nyloc
6 NUT, 1/4-20 Hex Nyloc
Position : 7
1 SPRING, Tie Bar
1 SPRING, Tie Bar
Position : 7
1 PINION, LH Drive
1 PINION, LH Drive
Position : 7
2 DECAL, Chute/International Warning
2 DECAL, Chute/International Warning
Position : 7
1 ASSEMBLY, Handle Clutch
1 ASSEMBLY, Handle Clutch
Position : 8
2 IDLER SPACER
2 IDLER SPACER
Position : 8
2 BUSHING, Front Axle
2 BUSHING, Front Axle
Position : 8
4 RING, External Retaining
4 RING, External Retaining
Position : 8
1 DECAL, Warning
1 DECAL, Warning
Position : 8
1 GRIP, International Symbol
1 GRIP, International Symbol
Position : 9
2 GUARD, Wear
2 GUARD, Wear
Position : 9
1 WELDMENT, Front Axle
1 WELDMENT, Front Axle
Position : 9
2 SEAL, Pinion (Felt)
2 SEAL, Pinion (Felt)
Position : 9
1 DECAL, OPC Bail International Symbol
1 DECAL, OPC Bail International Symbol
Position : 9
1 CABLE, Clutch (Adjustable)
1 CABLE, Clutch (Adjustable)
Position : 10
1 PLUG, Hole (Polyethylene)
1 PLUG, Hole (Polyethylene)
Position : 10
2 WHEEL, 8.0 x 2.0 (Front)
2 WHEEL, 8.0 x 2.0 (Front)
Position : 10
2 RETAINER, Pinion Seal
2 RETAINER, Pinion Seal
Position : 10
1 DECAL, Height Control Instruction (Euro)
1 DECAL, Height Control Instruction (Euro)
Position : 10
1 CLAMP, 7/8” Double Cable
1 CLAMP, 7/8” Double Cable
Position : 11
1 BRACKET, R.H. Stiffener w/tab
1 BRACKET, R.H. Stiffener w/tab
Position : 11
4 WASHER, .5 x 1.0 x .03 Flat
4 WASHER, .5 x 1.0 x .03 Flat
Position : 11
1 WASHER, Felt
1 WASHER, Felt
Position : 11
1 DECAL, European Community (CE)
1 DECAL, European Community (CE)
Position : 11
1 CABLE-TIE, 7” not shown
1 CABLE-TIE, 7” not shown
Position : 12
1 PLATE, Height Adjust
1 PLATE, Height Adjust
Position : 12
1 *SPRING, Clutch
1 *SPRING, Clutch
Position : 12
2 ASSEMBLY, Bearing Carrier includes bearing p/n
2 ASSEMBLY, Bearing Carrier includes bearing p/n
Position : 12
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Position : 12
1 BRACKET, Shift
1 BRACKET, Shift
Position : 13
2 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap
2 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap
Position : 13
2 *WASHER, 17/32” Flat
2 *WASHER, 17/32” Flat
Position : 13
2 BUSHING, Rear Axle (S/P)
2 BUSHING, Rear Axle (S/P)
Position : 13
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Position : 13
4 WIRE TIE, 1.29” Long Black
4 WIRE TIE, 1.29” Long Black
Position : 14
2 SPACER, Stiffener
2 SPACER, Stiffener
Position : 14
1 TUBING, 5/8 I.D. Convoluted
1 TUBING, 5/8 I.D. Convoluted
Position : 14
1 DECAL, OPEI Walk/Ride
1 DECAL, OPEI Walk/Ride
Position : 14
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 15
1 ROD, Trailing Shield Pivot (1/4” Dia.)
1 ROD, Trailing Shield Pivot (1/4” Dia.)
Position : 15
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
Position : 15
1 DECAL, Throttle Control, KWV
1 DECAL, Throttle Control, KWV
Position : 15
8 WASHER, 11/32” Flat
8 WASHER, 11/32” Flat
Position : 16
2 SCREW, 1/4-20 x 1” Hex Head Cap GR
2 SCREW, 1/4-20 x 1” Hex Head Cap GR
Position : 16
1 BRACKET, Transmission
1 BRACKET, Transmission
Position : 16
1 DECAL, Noise
1 DECAL, Noise
Position : 16
2 WASHER, 7/32” Flat
2 WASHER, 7/32” Flat
Position : 17
1 WELDMENT, Crash Bar
1 WELDMENT, Crash Bar
Position : 17
1 NUT, M10 x 1.50 Hex Nyloc
1 NUT, M10 x 1.50 Hex Nyloc
Position : 17
1 DECAL, Speed Shift- ELP, ECLP
1 DECAL, Speed Shift- ELP, ECLP
Position : 17
1 CONTROL PANEL (w/o El. Switch Hole)
1 CONTROL PANEL (w/o El. Switch Hole)
Position : 18
4 SCREW, 1/4-20 x 5/8” Truss Head (Torx)
4 SCREW, 1/4-20 x 5/8” Truss Head (Torx)
Position : 18
1 PULLEY, Transmission
1 PULLEY, Transmission
Position : 18
1 DECAL, 2005 Year of Manufacture
1 DECAL, 2005 Year of Manufacture
Position : 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
Position : 19
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
Position : 19
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
Position : 19
1 ROPE GUIDE (1/4-20 threads)
1 ROPE GUIDE (1/4-20 threads)
Position : 20
1 BELT COVER, Commercial Metal B&S
1 BELT COVER, Commercial Metal B&S
Position : 20
2 WASHER, 17/32” Flat
2 WASHER, 17/32” Flat
Position : 20
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position : 21
2 BOLT, #10-24 x 5/8” Flat Head Carriage
2 BOLT, #10-24 x 5/8” Flat Head Carriage
Position : 21
1 KNOB, Height Adjusting Lever
1 KNOB, Height Adjusting Lever
Position : 21
1 THROTTLE CONTROL, 6.0 KWV
1 THROTTLE CONTROL, 6.0 KWV
Position : 22
4 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
4 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 22
1 ROLL PIN, 3/16 x 3/4”
1 ROLL PIN, 3/16 x 3/4”
Position : 22
2 THROTTLE KNOB
2 THROTTLE KNOB
Position : 23
1 WELDMENT, Baffle
1 WELDMENT, Baffle
Position : 23
1 SPRING, Clutch
1 SPRING, Clutch
Position : 23
6 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
6 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
Position : 24
1 PUSHNUT, 1/4” Black
1 PUSHNUT, 1/4” Black
Position : 24
1 HANDLE, Lift
1 HANDLE, Lift
Position : 24
1 FOAM GRIP, 18.75”
1 FOAM GRIP, 18.75”
Position : 25
2 SUPPORT, Rear Axle
2 SUPPORT, Rear Axle
Position : 25
1 SPACER, .37 x .5 x .44
1 SPACER, .37 x .5 x .44
Position : 25
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position : 26
6 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap Was
6 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap Was
Position : 26
1 SPRING-Torsion Return
1 SPRING-Torsion Return
Position : 26
2 NUT, 3/8-16 Hex Center Lock
2 NUT, 3/8-16 Hex Center Lock
Position : 27
1 KEY, Hi-Pro #HP506 (Briggs engine)
1 KEY, Hi-Pro #HP506 (Briggs engine)
Position : 27
1 SCREW, 1/4-20 x 2” Hex Head Cap GR
1 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position : 27
6 WASHER, 5/16” Internal Tooth Lock
6 WASHER, 5/16” Internal Tooth Lock
Position : 28
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
Position : 28
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position : 28
1 CONTROL, Speed Select
1 CONTROL, Speed Select
Position : 29
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
Position : 29
1 *SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
1 *SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 29
2 SCREW, 5/16-18 x 2” Square Neck Curved Head Was
2 SCREW, 5/16-18 x 2” Square Neck Curved Head Was
Position : 30
2 NUT, 3/8-16 Hex Nyloc Was
2 NUT, 3/8-16 Hex Nyloc Was
Position : 30
6 NUT, 5/16-18 Hex Nyloc
6 NUT, 5/16-18 Hex Nyloc
Position : 31
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
Position : 31
1 *LEVER, Transmission (Metal)
1 *LEVER, Transmission (Metal)
Position : 31
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
Position : 32
1 BLADE, 21” Bagging
1 BLADE, 21” Bagging
Position : 32
2 *NUT, #10-24 Hex Center Lock
2 *NUT, #10-24 Hex Center Lock
Position : 32
5 WASHER, 1/4” Internal Tooth Lock Was
5 WASHER, 1/4” Internal Tooth Lock Was
Position : 33
1 WASHER, 3/8” Split Lock (Heavy)
1 WASHER, 3/8” Split Lock (Heavy)
Position : 33
5 NUT, 1/4-20 Hex Was
5 NUT, 1/4-20 Hex Was
Position : 34
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
Position : 34
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position : 35
3 SCREW, 3/8-16 x 1” Hex Head Cap, GR
3 SCREW, 3/8-16 x 1” Hex Head Cap, GR
Position : 35
2 BUSHING, .27 x .35 x .4 Flange
2 BUSHING, .27 x .35 x .4 Flange
Position : 36
4 BOLT, 5/16-18 x 1” Round Head Carriage GR
4 BOLT, 5/16-18 x 1” Round Head Carriage GR
Position : 36
1 PIN, 1/4 x 1-1/2”
1 PIN, 1/4 x 1-1/2”
Position : 37
2 NUT, #10-24 Hex Center Lock
2 NUT, #10-24 Hex Center Lock
Position : 37
1 PUSHNUT, 1/4”
1 PUSHNUT, 1/4”
Position : 38
2 WASHER, .28 x .63 x .06 Flat was
2 WASHER, .28 x .63 x .06 Flat was
Position : 38
1 SHIELD, Trailing, Commercial Cast
1 SHIELD, Trailing, Commercial Cast
Position : 39