Vue éclatée snb 6 kp SNAPPER snb6kp

Découvrez la vue éclatée complète snb 6 kp SNAPPER snb6kp, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre snb 6 kp. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre snb 6 kp SNAPPER snb6kp et éviter les pannes imprévues.

Assistant réparation Powered by ChatGPT

Liste des pièces détachées

1 HANDLE, Upper
1 HANDLE, Upper
Position : 1
1 ASSEMBLY, Discharge Door
1 ASSEMBLY, Discharge Door
Position : 1
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
Position : 1
1 AXLE/TRANSMISSION ASSY (Incl. items 2-19 & 24-28)
1 AXLE/TRANSMISSION ASSY (Incl. items 2-19 & 24-28)
Position : 1
1 DECAL, SNAPPER
1 DECAL, SNAPPER
Position : 1
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
Position : 1
1 HANDLE, Middle
1 HANDLE, Middle
Position : 2
1 BELT GUIDE (Wireform)
1 BELT GUIDE (Wireform)
Position : 2
2 WHEEL, 9.0 x 2.0 (Rear Drive) includes 73618 bushing
2 WHEEL, 9.0 x 2.0 (Rear Drive) includes 73618 bushing
Position : 2
1 TRANSMISSION ASSY, 3SP Commercial Waldes # 5133-50
1 TRANSMISSION ASSY, 3SP Commercial Waldes # 5133-50
Position : 2
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Position : 2
1 ASSEMBLY, Catcher Frame Was 53176 (Now 44915 +
1 ASSEMBLY, Catcher Frame Was 53176 (Now 44915 +
Position : 2
2 BRACKET, Handle
2 BRACKET, Handle
Position : 3
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position : 3
1 BUSHING, Wheel (PM)
1 BUSHING, Wheel (PM)
Position : 3
1 WELDMENT, Rear Axle Waldes # 5133-50
1 WELDMENT, Rear Axle Waldes # 5133-50
Position : 3
1 DECAL, Danger (Keep Hands and Feet Away)
1 DECAL, Danger (Keep Hands and Feet Away)
Position : 3
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
Position : 3
1 COTTER PIN, Bow Tie Locking
1 COTTER PIN, Bow Tie Locking
Position : 4
4 SCREW, 1/4-20 x 5/8” Phillips Truss Head Machine
4 SCREW, 1/4-20 x 5/8” Phillips Truss Head Machine
Position : 4
2 COTTER PIN, 3/8” Self Locking
2 COTTER PIN, 3/8” Self Locking
Position : 4
2 SHIELD, Dust
2 SHIELD, Dust
Position : 4
1 DECAL, Warning (International Symbol)
1 DECAL, Warning (International Symbol)
Position : 4
1 PLUG, Mulching MULCHING PARTS
1 PLUG, Mulching MULCHING PARTS
Position : 4
1 BAIL, OPC Control
1 BAIL, OPC Control
Position : 5
1 WELDMENT, Tie Bar
1 WELDMENT, Tie Bar
Position : 5
2 PAWL, 3/16” O.D.
2 PAWL, 3/16” O.D.
Position : 5
1 DECAL, Commercial, Walk-Behind Mower
1 DECAL, Commercial, Walk-Behind Mower
Position : 5
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 13010) DISCHARGING PARTS
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 13010) DISCHARGING PARTS
Position : 5
1 CLIP, Zone Control
1 CLIP, Zone Control
Position : 6
1 DECK, 21” Cast Aluminum Short (Red)
1 DECK, 21” Cast Aluminum Short (Red)
Position : 6
5 COTTER PIN, 1/8 x 3/4”
5 COTTER PIN, 1/8 x 3/4”
Position : 6
1 PINION, RH Drive
1 PINION, RH Drive
Position : 6
1 DECAL, Chute Deflector (Cast)
1 DECAL, Chute Deflector (Cast)
Position : 6
1 CABLE, Zone Control
1 CABLE, Zone Control
Position : 7
6 NUT, 1/4-20 Hex Nyloc
6 NUT, 1/4-20 Hex Nyloc
Position : 7
1 SPRING, Tie Bar
1 SPRING, Tie Bar
Position : 7
1 PINION, LH Drive
1 PINION, LH Drive
Position : 7
2 DECAL, Chute/International Warning
2 DECAL, Chute/International Warning
Position : 7
1 ASSEMBLY, Handle Clutch
1 ASSEMBLY, Handle Clutch
Position : 8
2 IDLER SPACER
2 IDLER SPACER
Position : 8
2 BUSHING, Front Axle
2 BUSHING, Front Axle
Position : 8
4 RING, External Retaining
4 RING, External Retaining
Position : 8
1 DECAL, Warning
1 DECAL, Warning
Position : 8
1 GRIP, International Symbol
1 GRIP, International Symbol
Position : 9
2 GUARD, Wear
2 GUARD, Wear
Position : 9
1 WELDMENT, Front Axle
1 WELDMENT, Front Axle
Position : 9
2 SEAL, Pinion (Felt)
2 SEAL, Pinion (Felt)
Position : 9
1 DECAL, OPC Bail International Symbol
1 DECAL, OPC Bail International Symbol
Position : 9
1 CABLE, Clutch (Adjustable)
1 CABLE, Clutch (Adjustable)
Position : 10
1 PLUG, Hole (Polyethylene)
1 PLUG, Hole (Polyethylene)
Position : 10
2 WHEEL, 8.0 x 2.0 (Front)
2 WHEEL, 8.0 x 2.0 (Front)
Position : 10
2 RETAINER, Pinion Seal
2 RETAINER, Pinion Seal
Position : 10
1 DECAL, Height Control Instruction (Euro)
1 DECAL, Height Control Instruction (Euro)
Position : 10
1 CLAMP, 7/8” Double Cable
1 CLAMP, 7/8” Double Cable
Position : 11
1 BRACKET, R.H. Stiffener w/tab
1 BRACKET, R.H. Stiffener w/tab
Position : 11
4 WASHER, .5 x 1.0 x .03 Flat
4 WASHER, .5 x 1.0 x .03 Flat
Position : 11
1 WASHER, Felt
1 WASHER, Felt
Position : 11
1 DECAL, European Community (CE)
1 DECAL, European Community (CE)
Position : 11
1 CABLE-TIE, 7” not shown
1 CABLE-TIE, 7” not shown
Position : 12
1 PLATE, Height Adjust
1 PLATE, Height Adjust
Position : 12
1 *SPRING, Clutch
1 *SPRING, Clutch
Position : 12
2 ASSEMBLY, Bearing Carrier includes bearing p/n
2 ASSEMBLY, Bearing Carrier includes bearing p/n
Position : 12
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Position : 12
1 BRACKET, Shift
1 BRACKET, Shift
Position : 13
2 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap
2 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap
Position : 13
2 *WASHER, 17/32” Flat
2 *WASHER, 17/32” Flat
Position : 13
2 BUSHING, Rear Axle (S/P)
2 BUSHING, Rear Axle (S/P)
Position : 13
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Position : 13
4 WIRE TIE, 1.29” Long Black
4 WIRE TIE, 1.29” Long Black
Position : 14
2 SPACER, Stiffener
2 SPACER, Stiffener
Position : 14
1 TUBING, 5/8 I.D. Convoluted
1 TUBING, 5/8 I.D. Convoluted
Position : 14
1 DECAL, OPEI Walk/Ride
1 DECAL, OPEI Walk/Ride
Position : 14
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 15
1 ROD, Trailing Shield Pivot (1/4” Dia.)
1 ROD, Trailing Shield Pivot (1/4” Dia.)
Position : 15
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
Position : 15
1 DECAL, Throttle Control, KWV
1 DECAL, Throttle Control, KWV
Position : 15
8 WASHER, 11/32” Flat
8 WASHER, 11/32” Flat
Position : 16
2 SCREW, 1/4-20 x 1” Hex Head Cap GR
2 SCREW, 1/4-20 x 1” Hex Head Cap GR
Position : 16
1 BRACKET, Transmission
1 BRACKET, Transmission
Position : 16
1 DECAL, Noise
1 DECAL, Noise
Position : 16
2 WASHER, 7/32” Flat
2 WASHER, 7/32” Flat
Position : 17
1 WELDMENT, Crash Bar
1 WELDMENT, Crash Bar
Position : 17
1 NUT, M10 x 1.50 Hex Nyloc
1 NUT, M10 x 1.50 Hex Nyloc
Position : 17
1 DECAL, Speed Shift- ELP, ECLP
1 DECAL, Speed Shift- ELP, ECLP
Position : 17
1 CONTROL PANEL (w/o El. Switch Hole)
1 CONTROL PANEL (w/o El. Switch Hole)
Position : 18
4 SCREW, 1/4-20 x 5/8” Truss Head (Torx)
4 SCREW, 1/4-20 x 5/8” Truss Head (Torx)
Position : 18
1 PULLEY, Transmission
1 PULLEY, Transmission
Position : 18
1 DECAL, 2005 Year of Manufacture
1 DECAL, 2005 Year of Manufacture
Position : 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
Position : 19
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
Position : 19
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
Position : 19
1 ROPE GUIDE (1/4-20 threads)
1 ROPE GUIDE (1/4-20 threads)
Position : 20
1 BELT COVER, Commercial Metal B&S
1 BELT COVER, Commercial Metal B&S
Position : 20
2 WASHER, 17/32” Flat
2 WASHER, 17/32” Flat
Position : 20
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position : 21
2 BOLT, #10-24 x 5/8” Flat Head Carriage
2 BOLT, #10-24 x 5/8” Flat Head Carriage
Position : 21
1 KNOB, Height Adjusting Lever
1 KNOB, Height Adjusting Lever
Position : 21
1 THROTTLE CONTROL, 6.0 KWV
1 THROTTLE CONTROL, 6.0 KWV
Position : 22
4 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
4 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 22
1 ROLL PIN, 3/16 x 3/4”
1 ROLL PIN, 3/16 x 3/4”
Position : 22
2 THROTTLE KNOB
2 THROTTLE KNOB
Position : 23
1 WELDMENT, Baffle
1 WELDMENT, Baffle
Position : 23
1 SPRING, Clutch
1 SPRING, Clutch
Position : 23
6 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
6 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
Position : 24
1 PUSHNUT, 1/4” Black
1 PUSHNUT, 1/4” Black
Position : 24
1 HANDLE, Lift
1 HANDLE, Lift
Position : 24
1 FOAM GRIP, 18.75”
1 FOAM GRIP, 18.75”
Position : 25
2 SUPPORT, Rear Axle
2 SUPPORT, Rear Axle
Position : 25
1 SPACER, .37 x .5 x .44
1 SPACER, .37 x .5 x .44
Position : 25
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position : 26
6 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap Was
6 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap Was
Position : 26
1 SPRING-Torsion Return
1 SPRING-Torsion Return
Position : 26
2 NUT, 3/8-16 Hex Center Lock
2 NUT, 3/8-16 Hex Center Lock
Position : 27
1 KEY, Hi-Pro #HP506 (Briggs engine)
1 KEY, Hi-Pro #HP506 (Briggs engine)
Position : 27
1 SCREW, 1/4-20 x 2” Hex Head Cap GR
1 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position : 27
6 WASHER, 5/16” Internal Tooth Lock
6 WASHER, 5/16” Internal Tooth Lock
Position : 28
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
Position : 28
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position : 28
1 CONTROL, Speed Select
1 CONTROL, Speed Select
Position : 29
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
Position : 29
1 *SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
1 *SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 29
2 SCREW, 5/16-18 x 2” Square Neck Curved Head Was
2 SCREW, 5/16-18 x 2” Square Neck Curved Head Was
Position : 30
2 NUT, 3/8-16 Hex Nyloc Was
2 NUT, 3/8-16 Hex Nyloc Was
Position : 30
6 NUT, 5/16-18 Hex Nyloc
6 NUT, 5/16-18 Hex Nyloc
Position : 31
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
Position : 31
1 *LEVER, Transmission (Metal)
1 *LEVER, Transmission (Metal)
Position : 31
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
Position : 32
1 BLADE, 21” Bagging
1 BLADE, 21” Bagging
Position : 32
2 *NUT, #10-24 Hex Center Lock
2 *NUT, #10-24 Hex Center Lock
Position : 32
5 WASHER, 1/4” Internal Tooth Lock Was
5 WASHER, 1/4” Internal Tooth Lock Was
Position : 33
1 WASHER, 3/8” Split Lock (Heavy)
1 WASHER, 3/8” Split Lock (Heavy)
Position : 33
5 NUT, 1/4-20 Hex Was
5 NUT, 1/4-20 Hex Was
Position : 34
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
Position : 34
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position : 35
3 SCREW, 3/8-16 x 1” Hex Head Cap, GR
3 SCREW, 3/8-16 x 1” Hex Head Cap, GR
Position : 35
2 BUSHING, .27 x .35 x .4 Flange
2 BUSHING, .27 x .35 x .4 Flange
Position : 36
4 BOLT, 5/16-18 x 1” Round Head Carriage GR
4 BOLT, 5/16-18 x 1” Round Head Carriage GR
Position : 36
1 PIN, 1/4 x 1-1/2”
1 PIN, 1/4 x 1-1/2”
Position : 37
2 NUT, #10-24 Hex Center Lock
2 NUT, #10-24 Hex Center Lock
Position : 37
1 PUSHNUT, 1/4”
1 PUSHNUT, 1/4”
Position : 38
2 WASHER, .28 x .63 x .06 Flat was
2 WASHER, .28 x .63 x .06 Flat was
Position : 38
1 SHIELD, Trailing, Commercial Cast
1 SHIELD, Trailing, Commercial Cast
Position : 39