Vue éclatée wp 2167517 bv SNAPPER wp2167517bv

Découvrez la vue éclatée complète wp 2167517 bv SNAPPER wp2167517bv, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre wp 2167517 bv. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre wp 2167517 bv SNAPPER wp2167517bv et éviter les pannes imprévues.

Assistant réparation Powered by ChatGPT

Liste des pièces détachées

1 HANDLE, Upper used on Push Models
1 HANDLE, Upper used on Push Models
Position : 1
1 DECK, 21” Mower (painted “HV” deck w/decals)
1 DECK, 21” Mower (painted “HV” deck w/decals)
Position : 1
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6)
1 ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6)
Position : 1
2 BALL BEARING, 9/16” I.D.
2 BALL BEARING, 9/16” I.D.
Position : 1
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier
2 WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier
Position : 1
1 BELT, Poly-Vee
1 BELT, Poly-Vee
Position : 1
4 NUT, 5/16-24 Hex Lock, GR C
4 NUT, 5/16-24 Hex Lock, GR C
Position : 1
ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only
ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only
Position : 1
1 ASSEMBLY, Grass Bag (Includes 2 thru 4)
1 ASSEMBLY, Grass Bag (Includes 2 thru 4)
Position : 1
1 DECAL, Blade Control
1 DECAL, Blade Control
Position : 1
2 LATCH, Frame Attachment
2 LATCH, Frame Attachment
Position : 1
1 SCREEN, Fastener Assembly
1 SCREEN, Fastener Assembly
Position : 1
1 BATTERY, 12 Volt, 35 CCA
1 BATTERY, 12 Volt, 35 CCA
Position : 1
1 HANDLE, Middle- 1990 used on All
1 HANDLE, Middle- 1990 used on All
Position : 2
10 NUT, 5/16-18 Hex Flange Lock, GR5
10 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 2
2 BOLT, 5/16-18 Hex Washer Face Shoulder
2 BOLT, 5/16-18 Hex Washer Face Shoulder
Position : 2
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap (Torx)
Position : 2
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later
2 WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later
Position : 2
1 LINK, Differential
1 LINK, Differential
Position : 2
1 WASHER, Cone
1 WASHER, Cone
Position : 2
1 ADAPTER, Grass Bag
1 ADAPTER, Grass Bag
Position : 2
1 DECAL, Speed Select used on Self-Propelled models
1 DECAL, Speed Select used on Self-Propelled models
Position : 2
1 RING, Bottom (21.77” Inside Diameter)
1 RING, Bottom (21.77” Inside Diameter)
Position : 2
1 HARNESS, Battery
1 HARNESS, Battery
Position : 2
1 HANDLE, Lower Left Hand used on All
1 HANDLE, Lower Left Hand used on All
Position : 3
10 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
10 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Position : 3
2 LATCH, Height
2 LATCH, Height
Position : 3
2 LATCH, Height Adjusting (Long)
2 LATCH, Height Adjusting (Long)
Position : 3
2 NUT, 7/16-20 Hex Center Lock Jam (thin)
2 NUT, 7/16-20 Hex Center Lock Jam (thin)
Position : 3
2 NUT, 7/16-20 Hex Center Lock Jam
2 NUT, 7/16-20 Hex Center Lock Jam
Position : 3
1 ARM, Clutch Idler
1 ARM, Clutch Idler
Position : 3
1 PULLEY, Poly-Vee Belt
1 PULLEY, Poly-Vee Belt
Position : 3
1 COVER, Bag Adapter
1 COVER, Bag Adapter
Position : 3
1 ASSEMBLY, Bag Wire (12” Wide)
1 ASSEMBLY, Bag Wire (12” Wide)
Position : 3
1 DECAL, Danger, Cut Finger
1 DECAL, Danger, Cut Finger
Position : 3
2 ROD, Tine
2 ROD, Tine
Position : 3
3 NUT, 5/16-24 Hex, GR5 only 1 shown
3 NUT, 5/16-24 Hex, GR5 only 1 shown
Position : 3
2 SCREW, #10-24 x 1/2” Pan Head Machine
2 SCREW, #10-24 x 1/2” Pan Head Machine
Position : 3
1 HANDLE, Lower Right Hand used on All
1 HANDLE, Lower Right Hand used on All
Position : 4
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage GR5
Position : 4
2 GRIP, Latch
2 GRIP, Latch
Position : 4
1 NUT, 1/4-20 Hex
1 NUT, 1/4-20 Hex
Position : 4
2 BUSHING, Axle
2 BUSHING, Axle
Position : 4
1 PULLEY, Idler
1 PULLEY, Idler
Position : 4
2 WASHER, Spring only 1 shown
2 WASHER, Spring only 1 shown
Position : 4
1 HINGE, Chute Cover
1 HINGE, Chute Cover
Position : 4
1 CONNECTOR, Grass Bag (weldment)
1 CONNECTOR, Grass Bag (weldment)
Position : 4
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Position : 4
1 SUPPORT, Wheel
1 SUPPORT, Wheel
Position : 4
3 WASHER, 5/16” Split Lock only 1 shown
3 WASHER, 5/16” Split Lock only 1 shown
Position : 4
2 NUT, #10-24 Square
2 NUT, #10-24 Square
Position : 4
1 BAIL, Blade Control used on All
1 BAIL, Blade Control used on All
Position : 5
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
3 SCREW, 3/8-16 x 1” Self-Tap (engine mounting screws)
Position : 5
6 NUT, 5/16-18 Hex Flange Lock, GR5
6 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 5
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-
6 WASHER, 7/16 x 1” O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-
Position : 5
4 WASHER, 7/16 x 1” O.D. Flat
4 WASHER, 7/16 x 1” O.D. Flat
Position : 5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Position : 5
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10)
1 ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10)
Position : 5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
Position : 5
1 ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE
1 ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE
Position : 5
1 DECAL, Noise (European)
1 DECAL, Noise (European)
Position : 5
1 TRAY, Tine
1 TRAY, Tine
Position : 5
3 SPRING only 1 shown
3 SPRING only 1 shown
Position : 5
1 KEY (Set of Two)
1 KEY (Set of Two)
Position : 5
1 CLIP, Blade Control used on 2002 Models & Earlier
1 CLIP, Blade Control used on 2002 Models & Earlier
Position : 6
2 PLUG, Hole
2 PLUG, Hole
Position : 6
2 RETAINER, 5/16” Bolt (Black)
2 RETAINER, 5/16” Bolt (Black)
Position : 6
1 ASSEMBLY, Wheel Arm, Right Rear (Round used on Push models (Incl. items 3, 10, 14,
1 ASSEMBLY, Wheel Arm, Right Rear (Round used on Push models (Incl. items 3, 10, 14,
Position : 6
2 PLUG, Wheel
2 PLUG, Wheel
Position : 6
1 NUT, 1/4-28 Hex Top Lock
1 NUT, 1/4-28 Hex Top Lock
Position : 6
1 HOUSING, Right Side
1 HOUSING, Right Side
Position : 6
5 WASHER, 1/4” Internal Tooth Lock
5 WASHER, 1/4” Internal Tooth Lock
Position : 6
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
1 ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14)
Position : 6
1 DECAL, 2001 Year of Manufacture not shown
1 DECAL, 2001 Year of Manufacture not shown
Position : 6
6 KIT, Tine Thatching Spring
6 KIT, Tine Thatching Spring
Position : 6
1 BEZEL (Seal & Face Nut)
1 BEZEL (Seal & Face Nut)
Position : 6
1 CABLE, Blade Control (49-1/4” long) used on 2002 Models & Earlier
1 CABLE, Blade Control (49-1/4” long) used on 2002 Models & Earlier
Position : 7
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5 used on Euro models
Position : 7
2 NUT, 5/16-18 Hex Flange Lock
2 NUT, 5/16-18 Hex Flange Lock
Position : 7
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14,
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14,
Position : 7
2 BUSHING, 3/8” Plastic
2 BUSHING, 3/8” Plastic
Position : 7
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
Position : 7
5 NUT, 1/4-20 Hex
5 NUT, 1/4-20 Hex
Position : 7
1 ADAPTER, Bag
1 ADAPTER, Bag
Position : 7
1 DECAL, Patent Numbers
1 DECAL, Patent Numbers
Position : 7
1 BUSHING, Wheel Adjuster
1 BUSHING, Wheel Adjuster
Position : 7
1 BRACKET, Ignition Switch
1 BRACKET, Ignition Switch
Position : 7
1 HANDLE, Wheel Drive used on Self-Propelled
1 HANDLE, Wheel Drive used on Self-Propelled
Position : 8
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
1 BOLT, 5/16-18 x 2-1/4” Hex Flange Lock used on Euro models
Position : 8
1 WELDMENT, Front Wheel Bracket used on 2002 Model Year and Earlier
1 WELDMENT, Front Wheel Bracket used on 2002 Model Year and Earlier
Position : 8
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models (Incl. items 1,
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models (Incl. items 1,
Position : 8
1 SHAFT, Hex Drive
1 SHAFT, Hex Drive
Position : 8
2 SEAL, 5/8” Internal Dia.
2 SEAL, 5/8” Internal Dia.
Position : 8
1 STOP, Cover
1 STOP, Cover
Position : 8
1 BRACKET, Rope Pulley
1 BRACKET, Rope Pulley
Position : 8
1 DECAL, Warning (Euro)
1 DECAL, Warning (Euro)
Position : 8
1 AXLE, Wheel
1 AXLE, Wheel
Position : 8
1 COVER, Switch
1 COVER, Switch
Position : 8
1 GRIP, Wheel Drive Handle used on Self-Propelled
1 GRIP, Wheel Drive Handle used on Self-Propelled
Position : 9
1 BUSHING used on Euro models
1 BUSHING used on Euro models
Position : 9
1 AXLE
1 AXLE
Position : 9
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models (Incl. items 1,
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models (Incl. items 1,
Position : 9
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
1 PULLEY, Poly-V, 2” O.D. Non Commercial Models
Position : 9
2 BEARING, Tapered- (Differential Housing)
2 BEARING, Tapered- (Differential Housing)
Position : 9
1 MOLDING, Trim
1 MOLDING, Trim
Position : 9
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
Position : 9
1 DECAL, Warning
1 DECAL, Warning
Position : 9
1 WHEEL, 7.00 x 1.50 Gage
1 WHEEL, 7.00 x 1.50 Gage
Position : 9
1 NUT, 5/8-32 Hex Lock
1 NUT, 5/8-32 Hex Lock
Position : 9
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
1 CABLE, Clutch Pull (Z-Bend, 38-5/8” long) used on Self-Propelled
Position : 10
1 COVER, Belt used on Euro models
1 COVER, Belt used on Euro models
Position : 10
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
1 ARM, Round Axle End, Right Rear (Round hole) used on Push models
Position : 10
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Position : 10
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375
1 BEARING, Ball, .437 I.D. x 1.125 O.D. x .375
Position : 10
1 BUSHING, Flange
1 BUSHING, Flange
Position : 10
1 DECAL, Euro Community (CE)
1 DECAL, Euro Community (CE)
Position : 10
10 NUT, 1/4-20 Hex Top Lock only 9 shown
10 NUT, 1/4-20 Hex Top Lock only 9 shown
Position : 10
1 SWITCH, Ignition (spring loaded ON/OFF
1 SWITCH, Ignition (spring loaded ON/OFF
Position : 10
1 COVER, Vinyl used on Self-Propelled
1 COVER, Vinyl used on Self-Propelled
Position : 11
2 WASHER, 7/16” Flat used on Euro models
2 WASHER, 7/16” Flat used on Euro models
Position : 11
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
1 ARM, Square Axle End, Left Rear (Square hole) used on Push models
Position : 11
1 SPRING, Torsion
1 SPRING, Torsion
Position : 11
1 PLUG, Housing
1 PLUG, Housing
Position : 11
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
Position : 11
1 PULLEY, Plastic
1 PULLEY, Plastic
Position : 11
1 DECAL, Deck/Chute (European)
1 DECAL, Deck/Chute (European)
Position : 11
4 WASHER, 1/4” Flat
4 WASHER, 1/4” Flat
Position : 11
1 SPACER
1 SPACER
Position : 11
1 SPRING, Clutch used on Self-Propelled
1 SPRING, Clutch used on Self-Propelled
Position : 12
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR5
Position : 12
1 ARM, Wheel, Right Rear used on Self-Propelled models
1 ARM, Wheel, Right Rear used on Self-Propelled models
Position : 12
1 STUD, Idler (3/8-24 thread)
1 STUD, Idler (3/8-24 thread)
Position : 12
1 GEAR, Input
1 GEAR, Input
Position : 12
1 NUT, 5/16-18 Hex Large Flange Center Lock
1 NUT, 5/16-18 Hex Large Flange Center Lock
Position : 12
1 NUT, 5/16-18 Hex Flange Lock GR5
1 NUT, 5/16-18 Hex Flange Lock GR5
Position : 12
1 DECAL, Deck Warning
1 DECAL, Deck Warning
Position : 12
2 SPRING, Compression
2 SPRING, Compression
Position : 12
2 WASHER, 1/4” Internal Tooth Lock
2 WASHER, 1/4” Internal Tooth Lock
Position : 12
1 SECTOR, Speed used on all other Self-Propelled models
1 SECTOR, Speed used on all other Self-Propelled models
Position : 13
2 WASHER, 3/8” I.D. Cone
2 WASHER, 3/8” I.D. Cone
Position : 13
1 ARM, Wheel, Left Rear used on Self-Propelled models
1 ARM, Wheel, Left Rear used on Self-Propelled models
Position : 13
1 HOLDER, Bearing (Inner Half)
1 HOLDER, Bearing (Inner Half)
Position : 13
1 AXLE, Short
1 AXLE, Short
Position : 13
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Position : 13
4 WASHER, 15/32” Flat
4 WASHER, 15/32” Flat
Position : 13
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
Position : 13
2 NUT, 1/4-28 Hex, GR5 or B
2 NUT, 1/4-28 Hex, GR5 or B
Position : 13
3 WIRE TIE, 1.29” Long (Black) used on Self-Propelled
3 WIRE TIE, 1.29” Long (Black) used on Self-Propelled
Position : 14
1 BLADE, Cutter (European) used on Euro models
1 BLADE, Cutter (European) used on Euro models
Position : 14
2 BOLT, 5/16-18 x 1” Shoulder
2 BOLT, 5/16-18 x 1” Shoulder
Position : 14
1 BEARING, Ball, .38 I.D. Spherical O.D.
1 BEARING, Ball, .38 I.D. Spherical O.D.
Position : 14
1 GEAR, Differential (46 tooth)
1 GEAR, Differential (46 tooth)
Position : 14
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Position : 14
4 RIVET
4 RIVET
Position : 14
1 DECAL, Front Baffle used on “FRP” & “EFRP” Air Models only
1 DECAL, Front Baffle used on “FRP” & “EFRP” Air Models only
Position : 14
2 NUT, 1/4-20 Hex, GR5
2 NUT, 1/4-20 Hex, GR5
Position : 14
1 HARNESS, Wiring
1 HARNESS, Wiring
Position : 14
1 SPRING, Speed Control used on Self-Propelled
1 SPRING, Speed Control used on Self-Propelled
Position : 15
1 HUB, Blade Drive 25mm used on Briggs Models
1 HUB, Blade Drive 25mm used on Briggs Models
Position : 15
2 RETAINER, 5/16” Bolt
2 RETAINER, 5/16” Bolt
Position : 15
1 O-RING
1 O-RING
Position : 15
2 PLATE, 46T Gear
2 PLATE, 46T Gear
Position : 15
1 CHUTE, Side
1 CHUTE, Side
Position : 15
1 PLUG, Chute Adapter
1 PLUG, Chute Adapter
Position : 15
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Position : 15
2 CAP, Vinyl
2 CAP, Vinyl
Position : 15
1 BRACKET, Battery
1 BRACKET, Battery
Position : 15
1 WASHER, 3/8” Flat used on Self-Propelled
1 WASHER, 3/8” Flat used on Self-Propelled
Position : 16
1 KEY, Woodruff # 605 used on Briggs Models
1 KEY, Woodruff # 605 used on Briggs Models
Position : 16
1 NUT, 3/8-24 Hex Center Lock GR5 or B
1 NUT, 3/8-24 Hex Center Lock GR5 or B
Position : 16
2 WASHER, Thrust, 3/4” I.D.
2 WASHER, Thrust, 3/4” I.D.
Position : 16
2 WASHER, 5/16” Flat
2 WASHER, 5/16” Flat
Position : 16
1 DECAL, Medallion
1 DECAL, Medallion
Position : 16
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
Position : 16
1 COVER, Battery
1 COVER, Battery
Position : 16
1 GRIP, Speed Control Handle used on all other Self-Propelled models
1 GRIP, Speed Control Handle used on all other Self-Propelled models
Position : 17
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
1 SCREW, 5/16-18 x 5/16” Hex Socket Set
Position : 17
1 BRACKET, Right Rear Wheel
1 BRACKET, Right Rear Wheel
Position : 17
1 HOLDER, Bearing (Outer Half)
1 HOLDER, Bearing (Outer Half)
Position : 17
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5 only 1 shown
Position : 17
2 WING-NUT, 5/16-18 Nyloc
2 WING-NUT, 5/16-18 Nyloc
Position : 17
1 DECAL, OPEI
1 DECAL, OPEI
Position : 17
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
Position : 17
1 ANCHOR, Speed Control used on all other Self-Propelled models
1 ANCHOR, Speed Control used on all other Self-Propelled models
Position : 18
1 PULLEY, Engine (25mm I.D. x 2-1/8” O.D.) used on Briggs Models
1 PULLEY, Engine (25mm I.D. x 2-1/8” O.D.) used on Briggs Models
Position : 18
1 BRACKET, Left Rear Wheel
1 BRACKET, Left Rear Wheel
Position : 18
1 CLIP, 1/4” Right Arc (Transfer Rod)
1 CLIP, 1/4” Right Arc (Transfer Rod)
Position : 18
1 GASKET, Housing
1 GASKET, Housing
Position : 18
1 COVER, 21” Deck
1 COVER, 21” Deck
Position : 18
1 DECAL, SNAPPER (Commercial) gold letters/red border/black background
1 DECAL, SNAPPER (Commercial) gold letters/red border/black background
Position : 18
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
Position : 18
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 18
1 GUIDE, Lower V-Belt used on Self-Propelled
1 GUIDE, Lower V-Belt used on Self-Propelled
Position : 19
1 WASHER, 7/16” Flat
1 WASHER, 7/16” Flat
Position : 19
1 AXLE Rear axle on Push Models; Front axle on All
1 AXLE Rear axle on Push Models; Front axle on All
Position : 19
1 ROD, Transfer used on Non-Euro models
1 ROD, Transfer used on Non-Euro models
Position : 19
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
3 WASHER, 5/16” Internal/External Tooth Lock only 1 shown
Position : 19
2 NUT, 5/16-18 Hex Large Flange Center Lock
2 NUT, 5/16-18 Hex Large Flange Center Lock
Position : 19
1 DECAL, Shift Warning used on Self-Propelled models
1 DECAL, Shift Warning used on Self-Propelled models
Position : 19
6 WASHER, Reinforcing only 1 shown
6 WASHER, Reinforcing only 1 shown
Position : 19
1 CLIP, Wiring
1 CLIP, Wiring
Position : 19
1 ROD, Transfer used on Self-Propelled
1 ROD, Transfer used on Self-Propelled
Position : 20
1 WELDMENT, Fender used on Euro models
1 WELDMENT, Fender used on Euro models
Position : 20
1 GUARD, Rear Foot used on Push models
1 GUARD, Rear Foot used on Push models
Position : 20
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
1 BELT, Engine Drive 3L (Stretch) used on Self-Propelled
Position : 20
1 BRACKET, Differential
1 BRACKET, Differential
Position : 20
1 DECAL, Caution Tag not used in 2003 model year
1 DECAL, Caution Tag not used in 2003 model year
Position : 20
6 WASHER, 5/16” Split Lock only 1 shown
6 WASHER, 5/16” Split Lock only 1 shown
Position : 20
1 CHARGER, Battery (120 Volt; 60 Hertz)
1 CHARGER, Battery (120 Volt; 60 Hertz)
Position : 20
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
1 CLIP, Transfer Rod 1/4” used on Self-Propelled
Position : 21
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 (only one shown)
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5 (only one shown)
Position : 21
1 GUARD, Rear Foot used on Self-Propelled models (except
1 GUARD, Rear Foot used on Self-Propelled models (except
Position : 21
1 PLATE, Thrust
1 PLATE, Thrust
Position : 21
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
4 SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap only 1 shown
Position : 21
1 DECAL, Ninja
1 DECAL, Ninja
Position : 21
6 NUT, 5/16-18 Hex, GR5 only 1 shown
6 NUT, 5/16-18 Hex, GR5 only 1 shown
Position : 21
1 TEE-NUT, 5/16-18 used on Self-Propelled
1 TEE-NUT, 5/16-18 used on Self-Propelled
Position : 22
2 RETAINER, 5/16” Bolt (only one shown)
2 RETAINER, 5/16” Bolt (only one shown)
Position : 22
1 RING, Split (Black) used on Self-Propelled models
1 RING, Split (Black) used on Self-Propelled models
Position : 22
2 RING, 5/8” External Retaining used on Self-Propelled
2 RING, 5/8” External Retaining used on Self-Propelled
Position : 22
1 SPACER, Axle Gear
1 SPACER, Axle Gear
Position : 22
1 DECAL, Hi-Vac
1 DECAL, Hi-Vac
Position : 22
2 NUT, 1/2” Push
2 NUT, 1/2” Push
Position : 22
1 BUSHING, Differential used on Self-Propelled
1 BUSHING, Differential used on Self-Propelled
Position : 23
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 23
1 SUPPORT, Foot Guard used on Self-Propelled models
1 SUPPORT, Foot Guard used on Self-Propelled models
Position : 23
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
1 BALL BEARING, 3/4” I.D. used on Self-Propelled
Position : 23
1 AXLE, Long
1 AXLE, Long
Position : 23
4 BEARING, Nyliner
4 BEARING, Nyliner
Position : 23
2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap GR5
Position : 23
1 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
1 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
Position : 24
2 LIFT, Air
2 LIFT, Air
Position : 24
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
Position : 24
4 SCREW, #10-32 x 1/4” Self-Tap Machine
4 SCREW, #10-32 x 1/4” Self-Tap Machine
Position : 24
4 GEAR, Pinion (12 tooth)
4 GEAR, Pinion (12 tooth)
Position : 24
1 SCREW, 5/16-18 x 1/4” Set
1 SCREW, 5/16-18 x 1/4” Set
Position : 24
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
Position : 25
4 WASHER, 5/16” Internal Tooth Lock
4 WASHER, 5/16” Internal Tooth Lock
Position : 25
1 WASHER, 1/4” Internal Tooth Lock
1 WASHER, 1/4” Internal Tooth Lock
Position : 25
1 SHIELD, Hex Shaft used on Self-Propelled Euro only
1 SHIELD, Hex Shaft used on Self-Propelled Euro only
Position : 25
4 SPACER, Pinion Gear
4 SPACER, Pinion Gear
Position : 25
2 WASHER, 1/2” Flat
2 WASHER, 1/2” Flat
Position : 25
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 used on All
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 used on All
Position : 26
4 NUT, 5/16-24 Hex, GR5
4 NUT, 5/16-24 Hex, GR5
Position : 26
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Position : 26
1 BALL JOINT, 1/4-28 used on Self-Propelled Euro only
1 BALL JOINT, 1/4-28 used on Self-Propelled Euro only
Position : 26
4 SHAFT, Pinion
4 SHAFT, Pinion
Position : 26
1 DECAL, Adjustment
1 DECAL, Adjustment
Position : 26
10 NUT, 5/16-18 Hex Flange Lock GR5 used on All
10 NUT, 5/16-18 Hex Flange Lock GR5 used on All
Position : 27
4 SCREW, 5/16-24 x 21/32” Machine
4 SCREW, 5/16-24 x 21/32” Machine
Position : 27
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only
1 NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only
Position : 27
4 NUT, #10-32 Hex Nyloc only 1 shown
4 NUT, #10-32 Hex Nyloc only 1 shown
Position : 27
1 DECAL, Thatcherizer
1 DECAL, Thatcherizer
Position : 27
1 NUT, 5/16-24 Hex Center Lock GR5 used on All
1 NUT, 5/16-24 Hex Center Lock GR5 used on All
Position : 28
2 NUT, 5/16-18 Hex Center Lock
2 NUT, 5/16-18 Hex Center Lock
Position : 28
1 LINK, Transfer used on Self-Propelled Euro only
1 LINK, Transfer used on Self-Propelled Euro only
Position : 28
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
1 ASSEMBLY, Left Housing (Includes items 8, 9 & 29)
Position : 28
1 CLIP, Cable/Wiring used on All
1 CLIP, Cable/Wiring used on All
Position : 29
1 DECAL, Front Baffle
1 DECAL, Front Baffle
Position : 29
1 WASHER, 3/4” Shim
1 WASHER, 3/4” Shim
Position : 29
1 HOUSING, Left
1 HOUSING, Left
Position : 29
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 used on All
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 used on All
Position : 30
1 BAFFLE, Front used on “FRP” & “EFRP” Air Models only
1 BAFFLE, Front used on “FRP” & “EFRP” Air Models only
Position : 30
3 WASHER, 3/8” Internal Tooth Lock
3 WASHER, 3/8” Internal Tooth Lock
Position : 30
3 GASKET, 5/8” O. D.
3 GASKET, 5/8” O. D.
Position : 30
4 T-KNOB, 5/16-18 (BLACK) used on All
4 T-KNOB, 5/16-18 (BLACK) used on All
Position : 31
1 DECAL, Front Baffle
1 DECAL, Front Baffle
Position : 31
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Position : 31
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All
Position : 32
2 BOLT, 5/16-18 x 3/4” Carriage, GR5
2 BOLT, 5/16-18 x 3/4” Carriage, GR5
Position : 32
3 NUT, 3/8-24 Hex, GR B
3 NUT, 3/8-24 Hex, GR B
Position : 32
3 WASHER, 1/4” Internal Tooth Lock used on All
3 WASHER, 1/4” Internal Tooth Lock used on All
Position : 33
2 WASHER, 5/16” Internal/External Tooth Lock
2 WASHER, 5/16” Internal/External Tooth Lock
Position : 33
1 NUT, 5/16-18 Hex GR5 or B continued on next page
1 NUT, 5/16-18 Hex GR5 or B continued on next page
Position : 33
3 NUT, 1/4-20 Hex GR5 or B used on All
3 NUT, 1/4-20 Hex GR5 or B used on All
Position : 34
2 WINGNUT, 5/16-18 Nyloc
2 WINGNUT, 5/16-18 Nyloc
Position : 34
1 WASHER, 5/16” Split Lock
1 WASHER, 5/16” Split Lock
Position : 34
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
1 SCREW, 1/4-20 x 2” Hex Head Cap GR5 used on All
Position : 35
1 WASHER, 5/16” Flat
1 WASHER, 5/16” Flat
Position : 35
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Position : 35
4 BUSHING used on All
4 BUSHING used on All
Position : 36
1 SPACER, 1/16” Thick, Blade Hub
1 SPACER, 1/16” Thick, Blade Hub
Position : 36
1 CONNECTOR, Transfer Rod
1 CONNECTOR, Transfer Rod
Position : 36
1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
1 PIN, 1/4” x 1-1/2” (for clutch handle) used on Self-Propelled
Position : 37
1 BAFFLE, Belt
1 BAFFLE, Belt
Position : 37
1 WASHER, Flat 1/4" used on Self-Propelled Euro only
1 WASHER, Flat 1/4" used on Self-Propelled Euro only
Position : 37
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
1 PUSH-NUT, 1/4” (for handle pin) used on Self-Propelled
Position : 38
3 PLUG, 5/16” Square Hole used on Push only
3 PLUG, 5/16” Square Hole used on Push only
Position : 38
1 BUSHING
1 BUSHING
Position : 38
1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
1 DECAL, Blade Control (Left Hand Side) used on all (except Euro)
Position : 39
3 PLUG, 5/16” Round Hole Qty 3 on Push; Qty 2 on Self-Propelled
3 PLUG, 5/16” Round Hole Qty 3 on Push; Qty 2 on Self-Propelled
Position : 39
1 DISC, Driven (Cantilever)
1 DISC, Driven (Cantilever)
Position : 39
1 GUIDE, Rope used on All
1 GUIDE, Rope used on All
Position : 40
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
4 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Position : 40
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
1 WASHER, 1/4” Internal Tooth Lock used on Self-Propelled Euro
Position : 40
1 FOAM GRIP, .84 I.D. x 11” long
1 FOAM GRIP, .84 I.D. x 11” long
Position : 41
1 DECAL, Warning Chute/Deflector
1 DECAL, Warning Chute/Deflector
Position : 41
1 RETAINER, 3/8” Bolt
1 RETAINER, 3/8” Bolt
Position : 41
1 DECAL, Speed Select used on Self-Propelled (except Euro)
1 DECAL, Speed Select used on Self-Propelled (except Euro)
Position : 42
1 SPRING, Wheel Drive
1 SPRING, Wheel Drive
Position : 42
1 CLAMP, Casing used on All
1 CLAMP, Casing used on All
Position : 43
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Position : 43
4 WASHER, 5/16” Internal Tooth Lock used on All
4 WASHER, 5/16” Internal Tooth Lock used on All
Position : 44
1 BRACKET, Deck
1 BRACKET, Deck
Position : 44
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, used on All
1 SCREW, 5/16-24 x 1-1/2” Round Hd. Machine, used on All
Position : 45
2 BUSHING, lange Plastic
2 BUSHING, lange Plastic
Position : 45
1 GUIDE, Rope used on All
1 GUIDE, Rope used on All
Position : 46
1 SPACER used on Commercial models
1 SPACER used on Commercial models
Position : 46
1 LEVER, Speed Control used on Self-Propelled
1 LEVER, Speed Control used on Self-Propelled
Position : 47
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR5
Position : 47
1 GUIDE, Rope used on Self-Propelled
1 GUIDE, Rope used on Self-Propelled
Position : 48
1 WASHER, 5/16” Internal Tooth Lock
1 WASHER, 5/16” Internal Tooth Lock
Position : 48
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
1 NUT, 1/4-20 Hex GR5 or B used on Self-Propelled
Position : 49
1 WASHER, Spring
1 WASHER, Spring
Position : 49
1 CABLE-TIE, 7” used on Self-Propelled
1 CABLE-TIE, 7” used on Self-Propelled
Position : 50
1 PIN, 3/32 x 1/2” Cotter
1 PIN, 3/32 x 1/2” Cotter
Position : 50
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR5 used on Self-Propelled
Position : 51
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
2 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Position : 51
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
1 SCREW, #10-32 x 5/8” Hex Head Self-Tap used on All
Position : 52
1 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Position : 52
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
1 WIRE TIE, 11” Long (Black) used on Self-Propelled
Position : 53
2 NUT, 5/16-18 Hex Flange Lock, GR5
2 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 53
1 CLAMP, 7/8” Double Cable used on Self-Propelled
1 CLAMP, 7/8” Double Cable used on Self-Propelled
Position : 54
1 SPRING, Clutch
1 SPRING, Clutch
Position : 54
1 GUIDE, Thrust Plate (3/8-24 thread)
1 GUIDE, Thrust Plate (3/8-24 thread)
Position : 55
1 KIT, Drive Disc Assembly comprised of 73528 (disc), 91302 (nut),
1 KIT, Drive Disc Assembly comprised of 73528 (disc), 91302 (nut),
Position : 56