Vue éclatée 28115 s SNAPPER 28115s

Découvrez la vue éclatée complète 28115 s SNAPPER 28115s, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre 28115 s. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre 28115 s SNAPPER 28115s et éviter les pannes imprévues.

Assistant réparation Powered by ChatGPT

Liste des pièces détachées

with included
with included
Position : 3
with included
with included
Position : 3
DECAL, BATTERY
DECAL, BATTERY
Position : 12358
(S) DECAL, START
(S) DECAL, START
Position : 12639
DECAL, DANGER, CUT FINGER Was
DECAL, DANGER, CUT FINGER Was
Position : 13871
N/A 1997 DECAL, BLADE STOP
N/A 1997 DECAL, BLADE STOP
Position : 14205
DECAL, CAUTION
DECAL, CAUTION
Position : 14416
DECAL, CAUTION Was
DECAL, CAUTION Was
Position : 18338
DECAL, SNAPPER Was
DECAL, SNAPPER Was
Position : 18586
NOT SHOWN (Included with Belt &
NOT SHOWN (Included with Belt &
Position : 19528
DECAL, CAUTION Was
DECAL, CAUTION Was
Position : 19582
Part of Kit 6-0300 - (See "Bag-N-Wagon
Part of Kit 6-0300 - (See "Bag-N-Wagon
Position : 60299
KIT, Snapper
KIT, Snapper
Position : 60300
Part of Kit 6-0300 - (See "Bag-N-Wagon, Frame
Part of Kit 6-0300 - (See "Bag-N-Wagon, Frame
Position : 60302
(Also Part of 6-0300, "Bag-N-Wagon Accessory"
(Also Part of 6-0300, "Bag-N-Wagon Accessory"
Position : 60302
DRIVE DISC PULLER
DRIVE DISC PULLER
Position : 60325
WHEEL HUB PULLER (NLA)
WHEEL HUB PULLER (NLA)
Position : 60327
RING, 3/4" External
RING, 3/4" External
Position : 7010746
RING, 1/2" External
RING, 1/2" External
Position : 7010776
WASHER, 3/4" I.D. x
WASHER, 3/4" I.D. x
Position : 7010935
BUSHING, Plastic Wear
BUSHING, Plastic Wear
Position : 7010996
(Used with Manual Start &
(Used with Manual Start &
Position : 7011853
DECAL, Caution, Slope-Load
DECAL, Caution, Slope-Load
Position : 7011910
DECAL, Caution, Grass Bag In
DECAL, Caution, Grass Bag In
Position : 7011964
BOLT, 1/4-28 Tapered
BOLT, 1/4-28 Tapered
Position : 7012175
BEARING, Axle Right Hand
BEARING, Axle Right Hand
Position : 7012296
SCREW, 5/16-24 x 1-5/8" Special
SCREW, 5/16-24 x 1-5/8" Special
Position : 7012333
Note: 33" & 41" units use Wide
Note: 33" & 41" units use Wide
Position : 7012426
WIRE, Ground (Briggs with ON-OFF
WIRE, Ground (Briggs with ON-OFF
Position : 7012631
HARNESS, Starter Wiring (Briggs Electric
HARNESS, Starter Wiring (Briggs Electric
Position : 7012640
WIRE, Ground (Tecumseh with ON-OFF
WIRE, Ground (Tecumseh with ON-OFF
Position : 7012643
HARNESS, Starter Wiring (Tecumseh
HARNESS, Starter Wiring (Tecumseh
Position : 7012946
SCREW, #10-32 X 3-1/2" Hex Head
SCREW, #10-32 X 3-1/2" Hex Head
Position : 7013299
CABLE, Positive Red (SLA Vented
CABLE, Positive Red (SLA Vented
Position : 7014064
(Used on 25, 28,
(Used on 25, 28,
Position : 7014101
SET-SCREW, 5/16-18x1/4"
SET-SCREW, 5/16-18x1/4"
Position : 7014103
DECAL, Thatcherizer Operation
DECAL, Thatcherizer Operation
Position : 7014119
BOLT, 3/8-24x1-3/4
BOLT, 3/8-24x1-3/4
Position : 7014158
* PAD, Left Hand Pedal Note: * Pads on early models only
* PAD, Left Hand Pedal Note: * Pads on early models only
Position : 7014169
* PAD, Right Hand Pedal
* PAD, Right Hand Pedal
Position : 7014170
SPRING, Latching 4.24" (25", 26", 28" & 30"
SPRING, Latching 4.24" (25", 26", 28" & 30"
Position : 7014320
SPRING, Latching 5.58"
SPRING, Latching 5.58"
Position : 7014389
(Used on 26 &
(Used on 26 &
Position : 7014394
Was 14766 (41" Models
Was 14766 (41" Models
Position : 7014501
Was 18081 (Included as part of item
Was 18081 (Included as part of item
Position : 7016108
Was 18492, Optional: may be used instead of
Was 18492, Optional: may be used instead of
Position : 7018700
PULLEY, Spindle (Note: Also use (Replaces P/N 1-0787 & P/N 1-8533 &
PULLEY, Spindle (Note: Also use (Replaces P/N 1-0787 & P/N 1-8533 &
Position : 7018781
CLAMP, Adapter Retention - 26 & 30"
CLAMP, Adapter Retention - 26 & 30"
Position : 7031123
26" & 30" Models (7060735
26" & 30" Models (7060735
Position : 7031724
SHIELD, Engine Exhaust
SHIELD, Engine Exhaust
Position : 7035048
DEFLECTOR, 26" & 30"
DEFLECTOR, 26" & 30"
Position : 7037334
28" & 33" Models (7060480
28" & 33" Models (7060480
Position : 7037723
25" DEFLECTOR,
25" DEFLECTOR,
Position : 7039605
PEDAL, Auxiliary Brake,
PEDAL, Auxiliary Brake,
Position : 7047772
PEDAL, Clutch/Brake, Left
PEDAL, Clutch/Brake, Left
Position : 7047773
FRONT AXLE Was 49813 (25" thru 30"
FRONT AXLE Was 49813 (25" thru 30"
Position : 7049974
FRONT AXLE Was 49812 (33" & 41" Wide,
FRONT AXLE Was 49812 (33" & 41" Wide,
Position : 7049975
ASSEMBLY, Switch (For Tecumseh (Includes items 2 thru 10).
ASSEMBLY, Switch (For Tecumseh (Includes items 2 thru 10).
Position : 7050900
ASSEMBLY, Switch (For Briggs
ASSEMBLY, Switch (For Briggs
Position : 7051482
Was 50618 (Semi-Pneumatic; Replace As
Was 50618 (Semi-Pneumatic; Replace As
Position : 7052268
deflector
deflector
Position : 7052553
28" & 33" DEFLECTOR,
28" & 33" DEFLECTOR,
Position : 7052555
28" & 33" DEFLECTOR Was 59532 (Includes 4A, B,
28" & 33" DEFLECTOR Was 59532 (Includes 4A, B,
Position : 7053934
COVER, Spindle (or Belt
COVER, Spindle (or Belt
Position : 7057258
Was 57294 (Auto. Blade
Was 57294 (Auto. Blade
Position : 7057458
Was 51310 (Auto. Blade Control
Was 51310 (Auto. Blade Control
Position : 7058969
25" DEFLECTOR
25" DEFLECTOR
Position : 7059531
(For B&S 10 & 11 HP Engines). (Includes items
(For B&S 10 & 11 HP Engines). (Includes items
Position : 7060334
(Includes Ball Bearing for item 2 and 3-7957
(Includes Ball Bearing for item 2 and 3-7957
Position : 7060662
Was 18535, Replace with 60753 &
Was 18535, Replace with 60753 &
Position : 7060753
BATTERY, SLA 12V/12 A.H. (1-4972 Was 60660, Replace with 60753 &
BATTERY, SLA 12V/12 A.H. (1-4972 Was 60660, Replace with 60753 &
Position : 7060753
FRAME/CANOPY
FRAME/CANOPY
Position : 7060964
26" DECK (Includes decals assemblies are no longer available,
26" DECK (Includes decals assemblies are no longer available,
Position : 7060995
Was 39823 or 60976 now when replacing deck, use new plastic
Was 39823 or 60976 now when replacing deck, use new plastic
Position : 7061969
Was 39821 or 60977 now
Was 39821 or 60977 now
Position : 7061970
30" DECK (Includes decals
30" DECK (Includes decals
Position : 7061971
Was 60978 now use
Was 60978 now use
Position : 7061972
ASSEMBLY, Drive Disc, 5" For 25, 26, 28, 41" Models (Includes items 2,3,4)
ASSEMBLY, Drive Disc, 5" For 25, 26, 28, 41" Models (Includes items 2,3,4)
Position : 7072658
ASSEMBLY, Drive Disc, 4" For 30 & 33" Models (Includes items 2,3,4) Was
ASSEMBLY, Drive Disc, 4" For 30 & 33" Models (Includes items 2,3,4) Was
Position : 7074187
SPACER, Differential (1.25" ID x
SPACER, Differential (1.25" ID x
Position : 7074431
LOCKWASHER, 1/4
LOCKWASHER, 1/4
Position : 7090053
LOCKWASHER, 1/4 Internal
LOCKWASHER, 1/4 Internal
Position : 7090053
WASHER, 1/4" Internal
WASHER, 1/4" Internal
Position : 7090053
LOCKWASHER, 1/4"
LOCKWASHER, 1/4"
Position : 7090053
SCREW, 1/4-20 x 5/8" Hex Head
SCREW, 1/4-20 x 5/8" Hex Head
Position : 7090072
CAPSCREW, 3/8-24x1" Hex
CAPSCREW, 3/8-24x1" Hex
Position : 7090160
CAPSCREW, 3/8-24x1 3/4" Hex
CAPSCREW, 3/8-24x1 3/4" Hex
Position : 7090161
SCREW, 5/16-24 x 5/8"
SCREW, 5/16-24 x 5/8"
Position : 7090228
CAPSCREW, 1/2-20x1" Hex
CAPSCREW, 1/2-20x1" Hex
Position : 7090268
NUT, 3/8-24 Hex Center
NUT, 3/8-24 Hex Center
Position : 7090289
SCREW, 3/8-24 x 3/4" Hex
SCREW, 3/8-24 x 3/4" Hex
Position : 7090292
NUT, 5/8-18 Hex Center
NUT, 5/8-18 Hex Center
Position : 7090356
SCREW, 5/16-18 x 5/8"
SCREW, 5/16-18 x 5/8"
Position : 7090361
SCREW, 5/16-18 x 5/8" Hex Washer
SCREW, 5/16-18 x 5/8" Hex Washer
Position : 7090361
NUT, 1/4-20 Center Lock, Grade
NUT, 1/4-20 Center Lock, Grade
Position : 7090372
LOCKWASHER, 5/16
LOCKWASHER, 5/16
Position : 7090391
WASHER, 5/16" Internal
WASHER, 5/16" Internal
Position : 7090391
WASHER, 5/16" External Tooth
WASHER, 5/16" External Tooth
Position : 7090395
SCREW, 1/2-20 x 1-1/4"
SCREW, 1/2-20 x 1-1/4"
Position : 7090491
CARRIAGE BOLT,
CARRIAGE BOLT,
Position : 7090496
WASHER, 1/2" Internal
WASHER, 1/2" Internal
Position : 7090509
SCREW, 1/4-28 x 1-1/2"
SCREW, 1/4-28 x 1-1/2"
Position : 7090528
SCREW, 1/4-28x1" Hex
SCREW, 1/4-28x1" Hex
Position : 7090535
SCREW, 1/4-28 x 3/4" Hex
SCREW, 1/4-28 x 3/4" Hex
Position : 7090541
CARRIAGE BOLT,
CARRIAGE BOLT,
Position : 7090731
SCREW, 1/4-20 x 5/8" Hex
SCREW, 1/4-20 x 5/8" Hex
Position : 7090741
NUT, 1/4-28 Hex Flange
NUT, 1/4-28 Hex Flange
Position : 7090743
SETSCREW, 5/16-18x1 1/4" Hex
SETSCREW, 5/16-18x1 1/4" Hex
Position : 7090809
SCREW, #10-24 x 1/2" Hex Washer Self-Tap
SCREW, #10-24 x 1/2" Hex Washer Self-Tap
Position : 7090913
SCREW, 1/4-20 x 3/8" Hex Washer
SCREW, 1/4-20 x 3/8" Hex Washer
Position : 7091084
SCREW, 1/4-20 x 1/2" Hex Washer
SCREW, 1/4-20 x 1/2" Hex Washer
Position : 7091122
CAPSCREW, 5/16Cx3/4" Hex
CAPSCREW, 5/16Cx3/4" Hex
Position : 7091318
BOLT, 5/16-18 Short Neck
BOLT, 5/16-18 Short Neck
Position : 7091508
CARRIAGE BOLT,
CARRIAGE BOLT,
Position : 7091530
SCREW, 5/16-18x3/4"
SCREW, 5/16-18x3/4"
Position : 7091541
BOLT, 3/8-16 x 3/4" Short Neck
BOLT, 3/8-16 x 3/4" Short Neck
Position : 7091547
BOLT, 5/16-18 x 1-1/2"
BOLT, 5/16-18 x 1-1/2"
Position : 7091612
SCREW, 1/4-20 x 5/8"
SCREW, 1/4-20 x 5/8"
Position : 7091819