Vue éclatée ezt 20500 bv SNAPPER ezt20500bv
Découvrez la vue éclatée complète ezt 20500 bv SNAPPER ezt20500bv, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre ezt 20500 bv. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre ezt 20500 bv SNAPPER ezt20500bv et éviter les pannes imprévues.
Assistant réparation
Powered by ChatGPT
Liste des pièces détachées
1 SEAT
Position : 1
4 NUT, HEX NYLON LOCK, 5/16-18
Position : 1
1 GRIP
Position : 1
2 FOAM GRIP
Position : 1
4 NUT, HEX NYLON LOCK, 5/16-18
Position : 1
5 NUT, HEX NYLON LOCK, 3/8-16
Position : 1
1 CAP
Position : 1
1 ENGINE, 18HP KOHLER
Position : 1
1 ENGINE, 20HP BRIGGS
Position : 1
1 SHORT BLOWOUT BAFFLE
Position : 1
1 BELT (FOR 44” DECKS)
Position : 1
1 BELT (FOR 50” DECKS)
Position : 1
3 NUT, HEX FLANGE, 9/16-18
Position : 1
3 DECAL, Snapper, 8” long
Position : 1
1 DECAL, Motion Control, RH
Position : 1
1 DUAL CHOKE/THROTTLE LEVER
Position : 1
1 SWITCH, IGNITION, (Includes Ref 2-4)
Position : 1
1 NUT, HEX NYLON LOCK, 1/2-13
Position : 2
1 SEAT STOP ROD
Position : 2
30 WASHER, SAE, 5/16
Position : 2
2 BALL JOINT, 5/16-24, LH
Position : 2
1 SPACER, 1.00 X 1.50 X .25
Position : 2
1 HYDRAULIC TANK
Position : 2
1 MUFFLER
Position : 2
1 MUFFLER
Position : 2
11 WASHER, 3/8, SAE
Position : 2
2 NUT, ADJUSTER
Position : 2
3 NUT, HEX NYLON LOCK, 3/8-16
Position : 2
6 WASHER, BELLEVILLED, 9/16
Position : 2
1 DECAL, Stripe, LH
Position : 2
1 DECAL, Belt and Blade
Position : 2
1 SWITCH, IGNITION, (Includes Ref 3-5)
Position : 2
2 WASHER, SAE, 1/2
Position : 3
12 WASHER, SAE, 5/16
Position : 3
2 PLATE, SEAT SLIDER
Position : 3
1 CAP
Position : 3
2 CONTROL LEVER BASE
Position : 3
1 PULLEY, PUMP DRIVE
Position : 3
5 CLAMP, #6 HOSE
Position : 3
6 NUT, HEX SERRATED FLANGE, 5/16-18
Position : 3
6 NUT, HEX SERRATED FLANGE, 5/16-18
Position : 3
4 NUT, HEX ALUMINUM INSERT LOCK, 3/8-16
Position : 3
4 WASHER, FLAT, 3/8
Position : 3
3 PULLEY
Position : 3
1 DECAL, Stripe, RH
Position : 3
1 DECAL, Ignition Switch Symbol, White/Black
Position : 3
1 KEY, Ignition Molded (Set of 2)
Position : 3
4 VALVE STEM & CAP ASSEMBLY
Position : 4
8 NUT, HEX NYLON LOCK, 5/16-18
Position : 4
1 SEAT MOUNT
Position : 4
1 HYDRAULIC TANK
Position : 4
4 WASHER, FLAT, 5/16
Position : 4
7 WASHER, 5/16, PLAIN, SAE
Position : 4
2 SLIDE
Position : 4
8 WASHER, 5/16, PLAIN, SAE
Position : 4
3 PULLEY, IDLER
Position : 4
3 HUB
Position : 4
2 DECAL, Transmission Release, Free Wheel
Position : 4
1 COVER
Position : 4
4 BEARING, ROLLER (2 PER TIRE)
Position : 5
2 FRICTION PLATE
Position : 5
2 SHOULDER BOLT, 3/8 X 3/8
Position : 5
2 NUT, HEX SERRATED FLANGE, 5/16-18
Position : 5
2 SPACER
Position : 5
2 NUT, HEX, 5/16-24, LH
Position : 5
2 NUT, HEX, 3/8-16
Position : 5
1 TEE FITTING
Position : 5
5 WASHER, SAE, 5/16
Position : 5
13 WASHER, SAE, 5/16
Position : 5
5 NUT, 5/16-18, HEX, NYLON LOCK
Position : 5
2 WASHER, PLAIN, 1/2
Position : 5
2 BUSHING, 5/8 X 3/4 X 13/32, POWDER METAL
Position : 5
2 WASHER, PLAIN, 1/2
Position : 5
3 COVER, ARBOR HOUSING
Position : 5
1 DECAL, Touch Up Paint
Position : 5
1 PLASTIC NUT
Position : 5
4 BEARING RETAINER (2 PER TIRE)
Position : 6
8 SCREW, FLAT HEAD SOCKET, 5/16-18 X 3/4
Position : 6
2 WASHER, USS, 5/16
Position : 6
2 SPRING CONTROL ROD
Position : 6
1 HOSE ASSEMBLY, 26” LONG
Position : 6
2 HEX NUT, SERRATED FLANGE, 1/4-20
Position : 6
4 BOLT, REAR WHEEL
Position : 6
2 BOLT, SHOULDER, 3/8-16
Position : 6
1 FITTING, GREASE
Position : 6
3 BEARING, BALL, 3/4 X 1-3/4 X 5/8
Position : 6
1 DECAL, Motion Control, LH
Position : 6
1 HOUR METER, DIGITAL (Includes Retaining
Position : 6
2 AXLE, FRONT CASTER
Position : 7
2 VINYL CAP
Position : 7
12 NUT, Hex Serrated Flange, 5/16-18
Position : 7
2 KNOB
Position : 7
10 NUT, HEX SERRATED FLANGE, 5/16-18
Position : 7
4 WASHER, SAE, 1/4
Position : 7
2 COLLAR, SET, 5/16
Position : 7
1 J-HOOK
Position : 7
2 HOSE ASSEMBLY, HI PRESS, 25-1/2”
Position : 7
3 NUT, HEX NYLON LOCK, 5/16-18
Position : 7
7 NUT, HEX NYLON LOCK, 5/16-18
Position : 7
11 NUT, HEX NYLON LOCK, 3/8-16
Position : 7
8 WASHER, .661 ID X 1.12 OD X .11, BLACK
Position : 7
1 SPACER
Position : 7
15 WASHER, .661 ID X 1.12 OD X .11, BLACK
Position : 7
3 SPACER, 21/32 X 3/4 X 5/8
Position : 7
1 DECAL, Danger
Position : 7
1 SWITCH, PTO
Position : 7
1 MAIN HARNESS ASSEMBLY
Position : 7
2 COLLAR, SPLIT, 1”
Position : 8
1 COLLAR, SET, 5/16
Position : 8
4 NUT, HEX NYLON LOCK, 1/4-20
Position : 8
2 SLIDER ROD ASSEMBLY
Position : 8
1 SPRING, EXTENSION, SWIVEL END
Position : 8
2 HOSE ASSEMBLY, HI PRESS, 29”
Position : 8
2 BRONZE FLANGE BEARING, 3/4”
Position : 8
8 WASHER
Position : 8
8 SPACER, 25/64 X 13/16 X 13/16, STEEL,
Position : 8
1 WASHER, RETAINING
Position : 8
8 SPACER-0.666 ID X 0.876OD X 1.25 LG SPLIT
Position : 8
3 SPACER, 11/16 X 5/32 X 2-11/16
Position : 8
1 CABLE, #6 X 15” LONG, RING TERMINAL
Position : 8
2 NUT, HEX NYLON LOCK, 1/2-13
Position : 9
4 BUSHING, FLANGE
Position : 9
2 NUT, HEX NYLON LOCK, 3/8-16
Position : 9
10 NUT, HEX NYLON LOCK, 3/8-16
Position : 9
2 SPRING
Position : 9
3 WASHER, FLAT, 3/8
Position : 9
4 FITTING, ADAPTER
Position : 9
1 CLUTCH ANCHOR PAD
Position : 9
4 GAUGE, WHEEL
Position : 9
2 ROLLER, ROUNDED
Position : 9
1 SPACER, 3/8 X 1 X 7/8
Position : 9
2 ROLLER, ROUNDED
Position : 9
3 BEARING, BALL, 11/16 X 1-9/16 X 15/32
Position : 9
1 DECAL, Warning
Position : 9
1 RING, SWITCH RETAINER
Position : 9
1 SWITCH, SEAT, GRAY, NC
Position : 9
2 WHEEL & TIRE ASSEMBLY, 20 X 8.0 - 10,
Position : 10
2 GREASE FITTING
Position : 10
1 BRAKE COVER PLATE
Position : 10
10 NUT, HEX SERRATED FLANGE, 3/8-16
Position : 10
2 NUT, HEX NYLON LOCK, 5/16-24
Position : 10
1 PULLEY, IDLER, SINGLE FLANGE
Position : 10
2 WHEEL MOTOR
Position : 10
2 NUT, PUSH
Position : 10
3 SEAL, FOAM
Position : 10
1 DECAL, Parking Brake
Position : 10
2 CAPSCREW, HEX WASHER HEAD PLASTITE,
Position : 10
4 BEARING, FLANGE
Position : 11
2 NUT, HEX, 5/16-24
Position : 11
4 FITTING, 90 DEG. O-RING
Position : 11
5 FITTING, 90 DEG. O-RING
Position : 11
1 CLUTCH, ELECTRIC
Position : 11
1 CLUTCH, ELECTRIC
Position : 11
4 NUT, FLANGE, SIDELOCK, 3/8-16
Position : 11
7 ROLLER
Position : 11
8 ROLLER
Position : 11
3 ARBOR HOUSING ASSEMBLY (INCLUDES
Position : 11
1 DECAL, Danger Do Not Put Hands/Feet in Mower
Position : 11
2 CABLE TIE, PUSH MOUNT
Position : 11
1 SPACER, .51 X .75 X 3.375
Position : 12
4 WASHER, SAE, 3/8
Position : 12
1 FUEL CAP
Position : 12
4 LOCK WASHER, 5/16
Position : 12
1 HOSE ASSEMBLY, 16-1/2” LONG
Position : 12
1 SPACER, .45 X 1.62 X .37
Position : 12
4 HEX NUT, SERRATED FLANGE, 3/8-16
Position : 12
1 GRIP, FOAM
Position : 12
3 FITTING, GREASE
Position : 12
1 BODY CLIP, 1/4-20
Position : 12
1 CIRCUIT BREAKER, 20A
Position : 12
8 LUG NUT, 1/2-20
Position : 13
2 NUT, HEX NYLON LOCK, 5/16-18
Position : 13
1 FUEL TANK ASSEMBLY, LH
Position : 13
1 NUT, HEX NYLON LOCK, 3/8-16
Position : 13
4 CAPSCREW, HEX HEAD, M8-1.25 X 35MM
Position : 13
1 FITTING, 45 DEG. 0-RING
Position : 13
7 CLAMP, HOSE
Position : 13
1 CAPSCREW, CRANKSHAFT, 7/16 X 3-1/4
Position : 13
1 CAPSCREW, CRANKSHAFT, 7/16 X 3-1/4
Position : 13
2 SPACER
Position : 13
2 CARRIAGE BOLT, 3/8-16 X 1-1/2
Position : 13
1 SPRING
Position : 13
24 CAPSCREW, HEX HEAD TAPTITE, 5/16-18 X
Position : 13
1 DECAL, 44”
Position : 13
1 DECAL, 50”
Position : 13
1 HOLE PLUG
Position : 13
1 CRICUIT BREAKER WIRE ASSEMBLY
Position : 13
4 WASHER, SAE, 1/2
Position : 14
8 WASHER, SAE, 5/16
Position : 14
1 FUEL GAUGE
Position : 14
4 NUT, HEX NYLON LOCK, M8-1.25
Position : 14
1 HYDRAULIC PUMP, LH
Position : 14
1 TIE WRAP
Position : 14
1 HITCH PIN ASSM, 1/2 X 3.50 (NOT SHOWN)
Position : 14
6 CAPSCREW, HEX HEAD TAPTITE, 5/16-18 X
Position : 14
1 DECAL, Danger Do Not Operate Without
Position : 14
1 O-RING
Position : 14
2 NUT, HEX JAM, 5/16-24
Position : 14
6 WASHER, SAE, 5/16
Position : 15
2 SPRING, COMPRESSION
Position : 15
1 NUT, HEX, 3/8-16
Position : 15
4 NUT, HEX SERRATED FLANGE, M8-1.25
Position : 15
1 WASHER, .41 X 1.75 X .14
Position : 15
4 FITTING, ADAPTER
Position : 15
3 STRAP
Position : 15
1 NUT, HEX NYLON LOCK, 5/16-18
Position : 15
2 BODY CLIP, 5/16-18
Position : 15
2 WASHER, LIGHT LOCK, 5/16
Position : 15
2 WASHER, SPRING, 5/16 X 1-1/4
Position : 16
2 CLEVIS, 3/8-24
Position : 16
2 DAMPENER
Position : 16
1 SHAFT, IDLER PIVOT
Position : 16
1 FILTER
Position : 16
4 BOLT, M8-1.25 X 30 MM
Position : 16
1 SPACER, 1/2 X 1 X 7/16
Position : 16
1 SHAFT, DECK LIFT, 50”
Position : 16
3 WASHER, 9/16, BLACK
Position : 16
1 SOLENOID
Position : 16
2 BUMPER
Position : 17
6 CAPSCREW, BUTTON ALLEN HEAD, #10-24 X
Position : 17
4 NUT, HEX, #10-24
Position : 17
2 BALL JOINT, 5/16-24
Position : 17
2 BUSHING, BRASS
Position : 17
1 FILTER HEAD
Position : 17
4 WASHER, 5/16 INT TOOTH LOCK
Position : 17
1 WASHER, 5/16 INT TOOTH LOCK
Position : 17
3 SHAFT, ARBOR
Position : 17
6 NUT, HEX SERRATED FLANGE, 5/16-18
Position : 18
2 NUT, HEX SERRATED FLANGE, 1/4-20
Position : 18
10 WASHER, LOCK, 5/16
Position : 18
2 SWITCH, NO/NC
Position : 18
1 HOSE ASSEMBLY, 11-3/4” LONG
Position : 18
4 HEX NUT, NYLON LOC, 5/16-18
Position : 18
1 WASHER
Position : 18
3 SHIELD, GRASS, LOWER
Position : 18
4 NUT, HEX SERRATED FLANGE, 1/4-20
Position : 18
2 SPRING, COMPRESSION
Position : 19
1 ROD
Position : 19
1 SPACER, IDLER PIVOT
Position : 19
1 FITTING, TEE
Position : 19
1 FITTING, TEE
Position : 19
2 GROMMET, 3/4”
Position : 19
3 BLADE, MOWER, 16-1/8 (FOR 44” DECKS)
Position : 19
3 BLADE, MOWER, 18-1/8 (FOR 50” DECKS)
Position : 19
1 CABLE, #6 X 10” LONG, RING TERMINAL
Position : 19
2 CARRIAGE BOLT, 5/16-18 X
Position : 20
1 NUT, HEX, 3/8-24
Position : 20
1 BELT
Position : 20
1 HOSE ASSEMBLY, 4-1/2” LONG
Position : 20
2 BRONZE FLANGE BUSHING
Position : 20
3 WASHER, HEX, 11/16 X
Position : 20
1 CABLE, #6 X 22” LONG, RING TERMINAL
Position : 20
1 FUEL TANK, RH
Position : 21
4 CAPSCREW, HEX HEAD, M6 X 14MM
Position : 21
1 HYDRAULIC PUMP, RH
Position : 21
3 WASHER, SPRING, 15/32, BLACK
Position : 21
1 BATTERY, 12 VOLT
Position : 21
8 BODY CLIP, 5/16-18
Position : 22
12 NUT, HEX SERRATED FLANGE, 5/16-18
Position : 22
2 WASHER, LOCK, 1/4
Position : 22
1 HOSE ASSEMBLY, 6” LONG
Position : 22
2 ADJUSTER, BRAKE LINKAGE
Position : 22
2 BOLT, REAR WHEEL
Position : 22
3 CAPSCREW, HEX HEAD, 7/16-14 X 1-1/4
Position : 22
1 CABLE, #6 X 30” LONG, RING TERMINAL
Position : 22
1 FLOOR PLATE
Position : 23
1 STRAP, BATTERY, 14 LONG, RUBBER
Position : 23
4 COLLAR, SET, 3/8
Position : 24
2 PULLEY, PUMP DRIVE
Position : 24
4 WASHER
Position : 24
2 GAUGE, WHEEL
Position : 24
2 CARRIAGE BOLT, 1/4-20 X 7/8
Position : 24
2 SWITCH, PLUNGER, NO/NC
Position : 24
2 SAFETY WALK
Position : 25
2 NUT, HEX, SERRATED FLANGE, 3/8-16
Position : 25
2 EYE BOLT, 3/8-16
Position : 25
2 GAUGE WHEEL
Position : 25
1 PLUG, HOLE
Position : 25
2 SWITCH, PLUNGER, NO/NC, SNAP IN
Position : 25
1 SAFETY WALK
Position : 26
2 ROD, BRAKE ADJSUTMENT
Position : 26
2 KEY, 5MM SQ. W/ ROUND ENDS
Position : 26
2 BRONZE BEARING
Position : 27
2 NUT, FLANGE, SIDELOCK, 3/8-16
Position : 27
2 NUT, PUSH
Position : 27
2 SPRING, COMPRESSION
Position : 28
1 IDLER PULLEY ASSEMBLY
Position : 28
2 BOLT, 1/2” X 3/8” SHOULDER
Position : 28
2 WASHER, 1/4, BLACK
Position : 28
2 WASHER, FLAT, 3/8
Position : 29
1 SPACER, 1.00 X 1.75 X .25
Position : 29
1 HANDLE COVER
Position : 29
1 CLAMP
Position : 29
2 FLANGE BEARING
Position : 30
1 PULLEY, CRANKSHAFT
Position : 30
1 WASHER, 5/16, BLACK
Position : 30
2 PIVOT SLEEVE
Position : 31
4 CAPSCREW, SOCKET HEAD, 3/8-16 X 1 1/4
Position : 31
2 SPACER, .59 X 1.50 X .25
Position : 31
1 SPRING
Position : 31
12 WASHER, LOCK, 1/4
Position : 32
4 BODY CLIP, 1/4-20
Position : 32
2 PULLEY, PUMP DRIVE
Position : 32
1 SPRING WASHER, 3/8
Position : 32
1 VINYL CAP
Position : 32
12 CAPSCREW, HEX HEAD, M6 X 14MM
Position : 33
1 EXTENSION SPRING
Position : 33
2 WASHER, LOCK, 1/4
Position : 33
1 BRAKE ASSEMBLY, LH
Position : 34
2 NUT, HEX, 1/4-20
Position : 34
1 BRAKE ASSEMBLY, RH (NOT SHOWN)
Position : 35
1 ROD, DEFLECTOR
Position : 35
2 BRAKE DRUM, 4 BOLT
Position : 36
6 HAIRPIN
Position : 36
1 DEFLECTOR, PLASTIC
Position : 36
4 SUPPORT BUSHING
Position : 38
2 SWITCH, PLUNGER, SNAP IN
Position : 39
4 CLEVIS, 1/2-20
Position : 39
4 HEX JAM NUT, 1/2-20
Position : 40
4 DECK HANGER ROD
Position : 41
4 DECK HANGER ROD
Position : 41
6 SPLIT COLLAR, 1/2”
Position : 42
2 SPLIT COLLAR, 1/2”
Position : 42
2 RUBBER BUMPER, 1/4-20
Position : 47
1 SPACER, .76 X 1.00 X .50
Position : 51
1 SPACER, .76 X 1.00 X 1.00
Position : 52
4 NUT, HEX NYLON LOCK, 1/2-20
Position : 53