Vue éclatée yt 24524 wdf SNAPPER yt24524wdf
Découvrez la vue éclatée complète yt 24524 wdf SNAPPER yt24524wdf, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre yt 24524 wdf. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre yt 24524 wdf SNAPPER yt24524wdf et éviter les pannes imprévues.
Assistant réparation
Powered by ChatGPT
Liste des pièces détachées
2 WHEEL & TIRE ASSEMBLY, 16X6.5-8, Front (Includes Ref. Nos. 2, 3, 4 & 5)
Position : 1
1 STEERING WHEEL
Position : 1
1 POWER STEERING UNIT
Position : 1
1 ROD, Brake Lock
Position : 1
1 HEADLIGHT ASSEMBLY, 4 Bulb (Includes Ref. Nos. 2 & 3)
Position : 1
2 TIRE, 16X6.5-8
Position : 2
1 SEAT, 18” Back
Position : 2
4 LOCKWASHER, Spring 1/4
Position : 2
1 KNOB, Push On, Red Plastic “P”
Position : 2
1 EDGING, Airduct
Position : 2
4 CARRIAGE BOLT, 5/16-18 x 3/4
Position : 2
4 BULB, Headlight, 12.8V
Position : 2
2 TUBE, Tire
Position : 3
4 CAPSCREW, Hex Head, M06-1 x 16mm
Position : 3
1 HOSE, Oil Drain
Position : 3
1 GRIP, Lift Lever
Position : 3
4 SOCKET ASSEMBLY, Headlight, Sealed
Position : 3
1 CLIP, Wire
Position : 4
1 TUBE, Hydraulic
Position : 4
2 WASHER, 5/16, Black
Position : 4
1 BUTTON, Red Nylon, for 1/4 Rod
Position : 4
1 HARNESS, Headlight
Position : 4
4 VALVE STEM & CAP ASSEMBLY
Position : 5
2 WASHER, Spring, 5/16 x 1-1/4
Position : 5
2 CARRIAGE BOLT, 5/16-18 x 1-1/4 G5
Position : 5
2 TIE, Wire
Position : 5
1 ROD, Brake
Position : 5
2 CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/2
Position : 5
1 NUT, Push
Position : 5
1 SWITCH, PTO Push/Pull Symbols
Position : 5
2 WASHER, Flat 3/4 x 1-5/8 x 1/8
Position : 6
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 22, 23 & 24)
Position : 6
2 SPRING, Compression
Position : 6
1 TUBE, Hydraulic, Steel
Position : 6
2 CARRIAGE BOLT, 3/8-16 x 1 3/4
Position : 6
1 THROTTLE CONTROL
Position : 6
1 SPRING, Compression, Lift Lever
Position : 6
1 SWITCH, RMO Module Only
Position : 6
2 WASHER, Flat
Position : 7
10 NUT, Hex Lock, ESNA Light, 5/16-18
Position : 7
2 SCREW, Whiz Lock, 1/4-20 x 1/2
Position : 7
2 BUSHING, 5/8 x 3/4 x 3/4, Nylon
Position : 7
2 CLAMP, Hose, Wire
Position : 7
1 QUADRANT, Lift, Powdered Metal
Position : 7
1 KEY, RMO Module Plastic
Position : 7
2 WASHER, 3/4
Position : 8
12 NUT, Hex Flange 1/4-20 Whiz Lock
Position : 8
2 SPRING, Compression
Position : 8
2 NUT, Push Pal
Position : 8
4 FITTING, Straight
Position : 8
1 FITTING, Lube, 1/4
Position : 8
1 HOSE, Fuel
Position : 8
2 CAPSCREW, Hex Head, 5/16-18 x 1, G8, Black
Position : 8
2 RING
Position : 9
1 DASHBOARD
Position : 9
8 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4
Position : 9
2 NUT, Hex Keps 5/16-18
Position : 9
1 FILTER, Oil
Position : 9
1 SPRING, Extension
Position : 9
1 TIE, Self Locking, 7-5/16 Long
Position : 9
1 BREAKER, Circuit, 12 Volt 20 Amps
Position : 9
4 CAP, Hub
Position : 10
2 CARRIAGE BOLT, 5/16-18 x
Position : 10
1 STEERING UNIT, Tilt
Position : 10
1 MANIFOLD, Oil Filter (Was 1719169)
Position : 10
3 PIN, Quick
Position : 10
5 NUT, Hex KEPS, 5/16-18
Position : 10
1 WIRE, 12GA 5-15/16 Long, Red
Position : 10
4 WASHER, 1 x 2-1/4 x 1/8
Position : 11
2 CARRIAGE BOLT, 3/8-16 x
Position : 11
1 BELLOWS, Tilt Steering Unit w/Slot
Position : 11
1 TUBE, Hydraulic
Position : 11
1 ARM & HUB ASSEMBLY, Idler
Position : 11
1 MUFFLER ASSEMBLY
Position : 11
1 ROD, Latch
Position : 11
1 SLIDE, Seat
Position : 12
1 CAP, Steering Wheel
Position : 12
2 PERMA, Push FItting
Position : 12
1 WASHER, 5/8
Position : 12
1 LOCK, Lift, Powdered Metal
Position : 12
1 PANEL, Instrument w/ Fuel Gage & Hour Meter (Includes Ref. No. 13)
Position : 12
2 PLATE & HUB ASSEMBLY
Position : 13
4 NUT, Speed, 5/16-18, Lug Type
Position : 13
1 SCREW, Rd Hd, Plastite #8
Position : 13
1 RING, Clipring Extension
Position : 13
8 CAPSCREW, Hex, Whiz Lock, 1/4-20 x 5/8
Position : 13
1 SPRING, Extension
Position : 13
1 COVER, Instrument Panel
Position : 13
2 WHEEL & TIRE ASSEMBLY, 23X10.5-12, Rear (Includes Ref. Nos. 5, 15, 16 & 17)
Position : 14
1 ROD, Dash Support
Position : 14
4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 5/8
Position : 14
1 COVER, Lift
Position : 14
1 PULLEY, w/Bearing
Position : 14
2 CLIP, Wire
Position : 14
1 SPACER, 1/2 x 3/4 x 23/32
Position : 14
2 TIRE, 23X10.5-12
Position : 15
2 PLUG, Plastic
Position : 15
1 NUT, Hex Lock ESNA Light 5/8-18
Position : 15
3 LOCKWASHER, External Tooth, 5/16
Position : 15
2 TUBE, Tire
Position : 16
1 SCREW, Hex Washer Head Slot #10-24 x .625
Position : 16
1 POD, with Cup Holder, LH
Position : 16
2 NUT, Hex Flange ESNA, 3/8-16
Position : 16
8 CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8
Position : 16
1 SOLENOID
Position : 16
12 SCREW, Hex Whiz Lock Flange 1/4-20 x 5/8
Position : 17
8 CAPSCREW, Hex Washer Head, 1/4-20 x 5/8
Position : 17
1 PULLEY, Idler
Position : 17
1 SWITCH ASSEMBLY, Ignition, 6 Pin INDAK (Includes Ref. Nos. 18, 19, 20, 21 & 22)
Position : 17
10 NUT, Hex, 7/16-20
Position : 18
1 DUCT, Air Inlet
Position : 18
4 NUT, Hex Flange Whiz Lock, 5/16-18
Position : 18
2 BUSHING, 1 x 1-1/8 x 5/8, Nylon
Position : 18
8 NUT, Speed, 1/4-20
Position : 18
1 PIN, Flat Head Drilled, 1/2 x 2-1/8 Long
Position : 18
1 KEYS, Set of
Position : 18
2 KEY, Hi-Pro 1/4 x
Position : 19
1 CAP, Gas
Position : 19
1 ARM, Brake
Position : 19
2 NUT, Speed, 3/8-18
Position : 19
1 CLIP, Hair Pin, 2-9/16 Long
Position : 19
1 COVER, For Ignition Switch, Plastic
Position : 19
2 WASHER, Flat
Position : 20
1 TUBE & ELBOW ASSEMBLY
Position : 20
1 PEDAL ASSEMBLY, Foot
Position : 20
1 WASHER, Locking, External Teeth, 3/8
Position : 20
1 NUT, Hex Flange, 5/8-32, Ignition Switch
Position : 20
2 WASHER, Flat
Position : 21
1 BUSHING, 3/8 x 9/16 x 5/8, Rubber
Position : 21
1 CARRIAGE BOLT, 1/4-20 x 1-1/4
Position : 21
4 CAPSCREW, Hex Head, Taptite, 3/8-16 x 1-1/2
Position : 21
1 NUT, Speed, 5/16-18, Lug
Position : 21
1 LOCKWASHER, Internal Tooth, 5/8, Thin
Position : 21
2 RING
Position : 22
4 BULB, Headlight (#1156)
Position : 22
1 TANK, Fuel
Position : 22
1 PIN, Cotter, Black
Position : 22
1 SPRING, Compression
Position : 22
1 WASHER, Shim
Position : 22
4 SOCKET ASSEMBLY, Seal
Position : 23
8 NUT, Hex KEPS, 5/16-18
Position : 23
1 PULLEY, Engine
Position : 23
1 RETAINER, Spring Flat
Position : 23
4 TIE, Strap, 7-5/16 Long
Position : 23
1 REFLECTOR, Headlight
Position : 24
3 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
Position : 24
1 WASHER, Hex, 7/16 x 1-1/2
Position : 24
1 CAPSCREW, Hex Washer Head, 5/16-18 x 4-1/2
Position : 24
1 SWITCH, Headlights , 2 Terminal
Position : 24
1 POD, RH with 2 Slots
Position : 25
1 HOSE, Hydraulic, 27" (Port R)
Position : 25
1 NUT, Hex Lock ESNA Light, 5/16-18
Position : 25
1 WASHER, Locking, 7/16
Position : 25
1 BOOT, Insulator Cable Terminal, 1-15/16 Long, Red
Position : 25
1 HOSE, Hydraulic, 18" (Port T)
Position : 26
1 WASHER, 5/16, Black
Position : 26
1 CAPSCREW, Hex Head 7/16-20 x 3-1/2
Position : 26
1 CABLE, #6 x 25" Long, Ring Terminals
Position : 26
1 HOSE, Hydraulic, 26" (Port P)
Position : 27
1 CLUTCH
Position : 27
1 CABLE, #6 x 8" Long, Ring Terminals
Position : 27
2 SPACER, 25/64 x 5/8 x 3/16, Hardened
Position : 28
1 HOSE, Hydraulic, 31" (Port L)
Position : 28
2 TIE, Self Locking
Position : 28
1 BOOT, Insulator Battery Terminal
Position : 28
2 NUT, Hex Flange Two-Way Lock, 3/8-16
Position : 29
1 POWER STEERING ASSEMBLY, 4 Ports, 4WD (Includes Ref. Nos. 1, 25, 26, 27 & 28)
Position : 29
1 PAD, Brake Pedal
Position : 29
2 CAPSCREW, Hex Head Taptite, 1/4-20 x 1/2
Position : 29
3 NUT, Hex, 1/4-20
Position : 29
2 WASHER, 3/8
Position : 30
4 CARRIAGE BOLT, 5/16-18 x 7/8
Position : 30
2 LOCKWASHER, 1/4
Position : 30
4 CAPSCREW, Hex Flange Whiz Lock Dog Point, 5/16-18 x
Position : 31
2 WASHER, Flat, 3/8
Position : 31
2 WASHER, 1/4
Position : 31
1 CABLE, #6 x 26 Long, Ring Terminal
Position : 33
4 NUT, Hex KEPS, 5/16-18
Position : 35
2 NUT, Hex Flange, Serrated, 1/4-20
Position : 35
1 STRAP, Battery, 14 Long, Rubber
Position : 35
1 PAD, Foot Pedal Forward
Position : 36
2 CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8
Position : 36
1 PAD, Foot Pedal Reverse
Position : 38
4 LOCKWASHER, 5/16
Position : 38
1 SWITCH, Reverse Pedal
Position : 38
1 NUT, Hex Lock ESNA Light, 1/4-20
Position : 39
4 CAPSCREW, Socket Head, 5/16-18 x 7/8, G8
Position : 39
1 SWITCH, Push Button, Foot Pedal
Position : 39
2 KEY, Parallel, 3/16 x 3/16 x 1-1/2
Position : 40
1 CAM, Roller, .686 OD, .253 ID, .575 LG (Was 1686612)
Position : 40
1 SPRING, Extension
Position : 41
5 SCREW, Pan Head Torx, #10-32 x 1/2
Position : 41
5 LOCKWASHER, 3/16 #10
Position : 42
1 PLUG, Hole 3", Round
Position : 43
1 SENDER, Fuel Tank (Includes Ref. 45)
Position : 44
1 GASKET
Position : 45
2 CAPSCREW, Hex Washer Head Plastite, 1/4 x 1/2
Position : 46
1 SWITCH, Seat, Grey, NC
Position : 47
1 HARNESS, Wiring
Position : 48
2 WASHER,
Position : 49
1 WIRING ASSEMBLY, All Conditions Shutdown
Position : 49
1 12-VOLT OUTLET
Position : 50
1 SWITCH, EHOC
Position : 57
Clermont-Ferrand Cedex
Position : 63014