Vue éclatée Fischer snm6xs-2007-snapper
Découvrez la vue éclatée complète Fischer snm6xs-2007-snapper, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre . Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre Fischer snm6xs-2007-snapper et éviter les pannes imprévues.
Assistant réparation
Powered by ChatGPT
Liste des pièces détachées
1 HANDLE, Upper finish: flat black textured
Position : 1
1 WELDMENT, 21” Deck Swivel Wheel
Position : 1
1 SCREW, 1/4-20 x 2-1/4” Hex Head Cap, GR
Position : 1
1 SCREW, 5/16-18 x 2” Hex Head Cap, GR
Position : 1
1 TRANSMISSION, LC Walk, Variable Speed includes pulley
Position : 1
1 BAG ASSEMBLY (Door) includes items 2 thru
Position : 1
1 DECAL,Euro Community (CE)
Position : 1
1 PLATE, Control Panel finish: flat black textured
Position : 2
1 REAR COVER, Belt/Transmission
Position : 2
1 SPRING, Torsion
Position : 2
1 PULLEY, Transmission
Position : 2
1 SCREW, 3/8-16 x 1” Hex Washer Self-Tap
Position : 2
1 CONNECTOR, Bag (weldment)
Position : 2
1 DECAL, SNAPPER Logo
Position : 2
4 SCREW, #8-16 Recessed Pan Head (Torxplus)
Position : 3
6 SCREW, 7mm x 1 x .550 AB Point replaces 7100059 rivet
Position : 3
1 BRACKET Swivel Wheel Lock, Red
Position : 3
2 WASHER, 1/2” Flat
Position : 3
3 NUT, 5/16-18 Hex Flange Lock
Position : 3
1 NUT, 3/8-16 Hex Center Lock Jam
Position : 3
2 SCREW, 3/8-16 x 2” Hex Washer Self-Tap
Position : 3
1 GRASS BAG (Door w/silver letters)
Position : 3
1 DECAL, Control Head, Variable Speed
Position : 3
1 GUIDE, Rope with 1/4-20 threads
Position : 4
2 PLUG, Hole (Polyethylene)
Position : 4
2 NUT, 1/4-20 Hex Center Lock
Position : 4
2 COTTER, Hairpin
Position : 4
3 BOLT, 5/16-18 x 5/8” Round Head Short Square Neck Carriage
Position : 4
2 WASHER, .390 I.D.
Position : 4
2 GUIDE, Belt
Position : 4
1 ASSEMBLY, Bag Wire (12”) 21S
Position : 4
1 DECAL, OPC Bail International Symbol
Position : 4
1 NUT, 1/4-20 Hex Nyloc
Position : 5
1 ROD, Trail Shield 1/4-20 thread- both ends
Position : 5
2 WASHER, .64 x .99 x .025 Flat
Position : 5
2 HUB CAP, 3-1/4” Diameter, Black
Position : 5
1 BELT GUIDE, Variable Speed (1/4-20 threads)
Position : 5
2 SPACER, Belt Guide
Position : 5
4 NUT, 1/4-20 Hex
Position : 5
1 DECAL, Spart Plug International Symbol
Position : 5
4 WASHER, 5/16 Internal Tooth Lock
Position : 6
1 SHIELD, Trail
Position : 6
4 BUSHING, 5/8” Nyliner
Position : 6
2 PAWL, 3/16” O.D.
Position : 6
1 SPACER, 3/8 x 13/16 x 5/32”
Position : 6
1 NUT, 1/4-20 Hex Top Lock Flange
Position : 6
1 PULLEY, Engine
Position : 6
4 WASHER, 1/4” Internal Tooth Lock
Position : 6
1 DECAL, Warning (Euro)
Position : 6
4 KNOB, 5/16-18 Wing (Black)
Position : 7
2 NUT, 1/4-20 Hex Flange Lock
Position : 7
2 WASHER, .64 x .99 x .075 Flat
Position : 7
2 ASSEMBLY, Axle Bearing incl. items 8 &
Position : 7
1 NUT, 1/4-20 Hex Top Lock Flange
Position : 7
1 BELT, 3L, Traction Drive 38.125 Nominal O.D.
Position : 7
1 KEY, Hi-Pro (#HP-506)
Position : 7
1 COVER, Bag Adapter
Position : 7
1 DECAL, Warning (Deck)
Position : 7
2 BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR
Position : 8
2 LUBE FITTING, 3/16”
Position : 8
1 HOUSING, Axle Bearing
Position : 8
2 NUT, 3/8-16 Hex Flange Lock
Position : 8
8 SCREW, 7mm x 1 x .550 AB Point
Position : 8
1 SET SCREW, 5/16-18 x 1/2” Hex Recess Type A Point (Cup Point)
Position : 8
1 HINGE, Chute Cover
Position : 8
1 DECAL, Noise, 98 DB
Position : 8
1 BOLT RETAINER, 5/16- Black
Position : 9
2 ROLL PIN, 1/4 x 1-3/4”
Position : 9
1 BALL BEARING, Axle .50 I.D. x 1.125 O.D. x .3125
Position : 9
1 WASHER, 13/32 x 1-1/2 x 1/8” Flat
Position : 9
1 SPRING, Return, Clutch
Position : 9
1 HUB, Blade Drive, 25M I.D.
Position : 9
5 BOLT, 1/4-20 x 5/8” Flat Head Square Neck, GR 5 or 7091064 (1/4-20 x 1/2”
Position : 9
1 DECAL, Deck/Chute International Warning
Position : 9
1 COVER, 21 Deck Recycling
Position : 10
1 WELDMENT, Swivel Wheel Brkt. LH (Red)
Position : 10
4 BOLT, 1/4-20 x 3/4” Hex Flange Lock
Position : 10
1 IDLER ARM, Belt Drive
Position : 10
1 BLADE, Wave, 21” Steel Deck
Position : 10
1 STOP, Cover
Position : 10
1 DECAL, 2005 Year of Manufacture not shown
Position : 10
1 DECAL, 2006 Year of Manufacture not shown
Position : 10
1 DECAL, 2007 Year of Manufacture
Position : 10
1 BOLT, 5/16-18 x 1-1/8” Short Square Neck Carriage, GR
Position : 11
1 WELDMENT, Swivel Wheel Brkt. RH (Red)
Position : 11
1 ASSEMBLY, Axle Arm, Left Rear
Position : 11
1 BELT GUIDE, Idler
Position : 11
1 WASHER, Cone
Position : 11
1 TRIM, Moulding
Position : 11
1 SPACER, .316 x .375 x .300/.310
Position : 12
2 SCREW, 5/16-18 X 1-1/4” Hex Head Cap, GR
Position : 12
1 ASSEMBLY, Axle Arm, Right Rear
Position : 12
2 PULLEY, Flat Idler, Plastic replaces
Position : 12
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
Position : 12
2 BOLT, 1/4-20 x 3/4” Short Square Neck Carriage, GR
Position : 12
1 DECAL, Warning, Euro, Multi-Panel
Position : 12
1 BAIL, Brake finish: flat black textured
Position : 13
1 NUT, 5/16-18 Large Flange Hex Center Lock
Position : 13
4 WASHER, .875 x .327 x .090 Flat
Position : 13
2 GRIP, Height Latch replaces 7027702 (voided)
Position : 13
1 BOLT, 3/8-16 x 1-1/2” Hex Flange Lock, GR
Position : 13
1 ADAPTER, Bag
Position : 13
1 * CABLE, Zone Control
Position : 14
2 NUT, 5/16-18 Hex Flange Lock
Position : 14
2 LEVER, Height Adjust, Swivel Wheel
Position : 14
2 SNAP RING, 1-3/8” Truarc 5100-137
Position : 14
1 SPACER, Pivot, Belt Idler
Position : 14
2 NUT, 5/16-18 Large Flange Hex Center Lock
Position : 14
1 * CABLE, Clutch
Position : 15
1 CHUTE, 21 Side Discharge
Position : 15
2 GRIP, Height Latch replaces 7027702 (voided)
Position : 15
2 SHIELD, Dust
Position : 15
1 SPACER, Idler
Position : 15
1 * CABLE, Speed
Position : 16
1 NUT, 5/16-18 Speed Shakeproof# FN-614020-1-50)
Position : 16
2 SPACER, Swivel Wheel Pivot
Position : 16
2 WASHER, .531 x 1.50 x .134 or 7100644 (WASHER, .531 x
Position : 16
1 SHIELD, Debris
Position : 16
3 BOLT RETAINER, 5/16- Black
Position : 16
1 HANDLE, Lower finish: flat black textured
Position : 17
2 ASSEMBLY, Axle Arm/Stud
Position : 17
4 RETAINING RING Waldes 5133-50
Position : 17
1 BOLT, 3/8-16 x 2-1/4” Short Square Neck Carriage, GR
Position : 17
1 BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR
Position : 17
2 WIRE TIE, 11 Inch Black Nylon
Position : 18
2 NUT, 5/16-18 Hex Center Lock
Position : 18
2 RETAINER, Pinion Seal
Position : 18
1 SCREW, 5/16-18 x 5/8” Cross Recess Pan Head
Position : 18
2 BOLT, 5/16-18 x 2” Curved Head Square Neck GR
Position : 19
2 SEAL, Pinion (Felt)
Position : 19
1 NUT, 5/16-18 Speed Shakeproof# FN-614020-1-50)
Position : 19
2 BRACKET, Lower Handle finish: flat black textured
Position : 20
2 WASHER, Shim, .875 x .531 x .060
Position : 20
1 PINION, LH Drive
Position : 20
1 ROD, Rope Pulley (3/8-16 thread)
Position : 20
2 BOLT, 5/16-18 x 1-1/2” Round Head Square Neck, GR
Position : 21
2 COTTER, Hairpin
Position : 21
1 PINION, RH Drive
Position : 21
2 LOCKWASHER, 1/4” Spring
Position : 21
7 BOLT, 5/16-18 x 5/8” Round Head Short Square Neck Carriage
Position : 22
2 HUB CAP, 1-3/8” Diameter black
Position : 22
2 O-RING, Buna N,
Position : 22
2 NUT, 1/4-20 Hex Jam, GR 5 or B
Position : 22
4 NUT, 5/16-18 Hex Flange Lock
Position : 23
2 O-RING, Buna N,
Position : 23
1 PULLEY, Nylon
Position : 23
1 * CONTROL, Swivel Wheel Latch 56.5 (LH Outside)
Position : 24
1 BUSHING, Flange, .381 x .625 x .62
Position : 24
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
Position : 25
1 NUT, 3/8-16 Hex Nyloc
Position : 25
3 NUT, 1/4-20 Hex Center Lock
Position : 26
2 PUSHNUT, 3/8”
Position : 27
2 FOAM GRIP, 7”
Position : 28