Vue éclatée Fischer snr7-dov-2008-snapper

Découvrez la vue éclatée complète Fischer snr7-dov-2008-snapper, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre . Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre Fischer snr7-dov-2008-snapper et éviter les pannes imprévues.

Assistant réparation Powered by ChatGPT

Liste des pièces détachées

1 HANDLE, Upper
1 HANDLE, Upper
Position : 1
1 DECK, 21” Cast Aluminum Rocker (Red) was
1 DECK, 21” Cast Aluminum Rocker (Red) was
Position : 1
2 REAR WHEEL ASSY, 9 x 2 (“Mass” Tread) includes Bushing 7073618; use
2 REAR WHEEL ASSY, 9 x 2 (“Mass” Tread) includes Bushing 7073618; use
Position : 1
2 SEAL, Pinion (Felt)
2 SEAL, Pinion (Felt)
Position : 1
1 DECAL, SNAPPER Name Plate
1 DECAL, SNAPPER Name Plate
Position : 1
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
1 GRASS BAG, SNAPPER Platinum Series GRASS CATCHER PARTS
Position : 1
1 HANDLE, Middle
1 HANDLE, Middle
Position : 2
1 BELT COVER, Commercial Metal B&S
1 BELT COVER, Commercial Metal B&S
Position : 2
2 REAR WHEEL ASSY, 9 x 2 (LS Tread) includes Bushing 7073618; use
2 REAR WHEEL ASSY, 9 x 2 (LS Tread) includes Bushing 7073618; use
Position : 2
2 RETAINER, Pinion Seal
2 RETAINER, Pinion Seal
Position : 2
1 DECAL, SNAPPER Control Panel
1 DECAL, SNAPPER Control Panel
Position : 2
1 FRAME, Catcher Weldment GRASS CATCHER PARTS
1 FRAME, Catcher Weldment GRASS CATCHER PARTS
Position : 2
2 BRACKET, Handle
2 BRACKET, Handle
Position : 3
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
Position : 3
2 REAR WHEEL ASSY, 9 x 2 (Double Bar II Tread) includes Bushing 7024541; use
2 REAR WHEEL ASSY, 9 x 2 (Double Bar II Tread) includes Bushing 7024541; use
Position : 3
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
4 SCREW, 1/4-20 x 3/8” Hex Washer Head, Self-Tap
Position : 3
1 DECAL, SNAPPER, Panel
1 DECAL, SNAPPER, Panel
Position : 3
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
1 GRIP, Rectangular (Black) GRASS CATCHER PARTS
Position : 3
1 COTTER PIN, Bow Tie Locking
1 COTTER PIN, Bow Tie Locking
Position : 4
2 BUSHING, Wheel (powdered metal)
2 BUSHING, Wheel (powdered metal)
Position : 4
4 RING, External Retaining Waldes # 5133-50
4 RING, External Retaining Waldes # 5133-50
Position : 4
1 DECAL, SNAPPER
1 DECAL, SNAPPER
Position : 4
1 PLUG, Mulching MULCHING PARTS
1 PLUG, Mulching MULCHING PARTS
Position : 4
1 BAIL, OPC Control
1 BAIL, OPC Control
Position : 5
1 CLAMP, Casing
1 CLAMP, Casing
Position : 5
2 BUSHING, Wheel (nylon)
2 BUSHING, Wheel (nylon)
Position : 5
2 ASSEMBLY, Bearing Carrier includes bearing p/n
2 ASSEMBLY, Bearing Carrier includes bearing p/n
Position : 5
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Position : 5
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 7013010) DISCHARGING PARTS
1 CHUTE, Side Discharge (incl. WARNING Decal, p/n 7013010) DISCHARGING PARTS
Position : 5
1 CLIP, Zone Control
1 CLIP, Zone Control
Position : 6
1 SCREW, #10-32 x 5/8” Self-Tap
1 SCREW, #10-32 x 5/8” Self-Tap
Position : 6
2 FRONT WHEEL ASSY, 8 x 2 (“Mass” Tread) use with Hub
2 FRONT WHEEL ASSY, 8 x 2 (“Mass” Tread) use with Hub
Position : 6
2 BUSHING, Rear Axle (S/P)
2 BUSHING, Rear Axle (S/P)
Position : 6
1 DECAL, Warning (International Symbol)
1 DECAL, Warning (International Symbol)
Position : 6
1 * CABLE, Zone Control (53.98”)
1 * CABLE, Zone Control (53.98”)
Position : 7
1 * CABLE, Zone Control (OPC) DOV Engine (53.73”) used on Model ELP216753BDV
1 * CABLE, Zone Control (OPC) DOV Engine (53.73”) used on Model ELP216753BDV
Position : 7
1 PLUG, Hole (Polyethylene)
1 PLUG, Hole (Polyethylene)
Position : 7
2 FRONT WHEEL ASSY, 8 x 2, (LS Tread)
2 FRONT WHEEL ASSY, 8 x 2, (LS Tread)
Position : 7
1 TUBING, 5/8 I.D. Convoluted
1 TUBING, 5/8 I.D. Convoluted
Position : 7
1 DECAL, Danger (Keep Hands and Feet Away)
1 DECAL, Danger (Keep Hands and Feet Away)
Position : 7
1 WELDMENT, Handle Clutch
1 WELDMENT, Handle Clutch
Position : 8
4 BOLT, 5/16-18 x 1” Round Head Carriage GR 5 or
4 BOLT, 5/16-18 x 1” Round Head Carriage GR 5 or
Position : 8
2 FRONT WHEEL ASSY, 8 x 2, (Double Bar II Tread)
2 FRONT WHEEL ASSY, 8 x 2, (Double Bar II Tread)
Position : 8
1 SCREW, #10-24 x 3/4” Pan Head Machine
1 SCREW, #10-24 x 3/4” Pan Head Machine
Position : 8
1 DECAL, European Community (CE)
1 DECAL, European Community (CE)
Position : 8
1 GRIP, International Symbol
1 GRIP, International Symbol
Position : 9
1 ASSEMBLY, Discharge Door
1 ASSEMBLY, Discharge Door
Position : 9
2 HUB CAP, 3-1/4” Diameter, Black
2 HUB CAP, 3-1/4” Diameter, Black
Position : 9
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
2 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tap
Position : 9
1 DECAL, Height Control Instruction (Euro)
1 DECAL, Height Control Instruction (Euro)
Position : 9
1 CABLE, Clutch (Adjustable)
1 CABLE, Clutch (Adjustable)
Position : 10
8 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap or
8 SCREW, 1/4-20 x 5/8” Hex Washer Face Self-Tap or
Position : 10
4 HAIRPIN, 1/16 x 29/32” Cotter
4 HAIRPIN, 1/16 x 29/32” Cotter
Position : 10
1 BRACKET, Transmission
1 BRACKET, Transmission
Position : 10
1 DECAL, Spark Plug International Symbol
1 DECAL, Spark Plug International Symbol
Position : 10
5 CLAMP, 7/8” Double Cable
5 CLAMP, 7/8” Double Cable
Position : 11
2 WASHER, .28 x .63 x .06 Flat was
2 WASHER, .28 x .63 x .06 Flat was
Position : 11
4 WASHER, 1/2” Flat
4 WASHER, 1/2” Flat
Position : 11
1 SPRING, Clutch
1 SPRING, Clutch
Position : 11
1 DECAL, Speed Shift- ELP, ECLP
1 DECAL, Speed Shift- ELP, ECLP
Position : 11
1 CABLE-TIE, 7” not shown
1 CABLE-TIE, 7” not shown
Position : 12
1 PLATE, Height Adjust
1 PLATE, Height Adjust
Position : 12
2 HUB CAP, 9” Euro
2 HUB CAP, 9” Euro
Position : 12
1 WASHER, 7/32” Flat
1 WASHER, 7/32” Flat
Position : 12
1 DECAL, Chute Deflector (Cast)
1 DECAL, Chute Deflector (Cast)
Position : 12
1 BRACKET, Shift
1 BRACKET, Shift
Position : 13
2 RIVET, 3/16 x 1/2” Steel
2 RIVET, 3/16 x 1/2” Steel
Position : 13
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
1 BELT, Traction Drive, Sect. 3L, 33.20” effective length engine/transmission
Position : 13
2 * NUT, #10-24 Hex Center Lock
2 * NUT, #10-24 Hex Center Lock
Position : 13
1 DECAL, Warning
1 DECAL, Warning
Position : 13
4 WIRE TIE, 1.29” Long Black
4 WIRE TIE, 1.29” Long Black
Position : 14
1 BRACKET, RH Trailing Shield Pivot Rod
1 BRACKET, RH Trailing Shield Pivot Rod
Position : 14
2 WHEEL RETAINER, 3/8”
2 WHEEL RETAINER, 3/8”
Position : 14
2 PAWL, 3/16” O.D.
2 PAWL, 3/16” O.D.
Position : 14
1 DECAL, Caution Symbols
1 DECAL, Caution Symbols
Position : 14
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
2 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 15
1 BRACKET, LH Trailing Shield Pivot Rod not shown
1 BRACKET, LH Trailing Shield Pivot Rod not shown
Position : 15
1 PIN, 3/8 x 5/8”
1 PIN, 3/8 x 5/8”
Position : 15
1 TRANSMISSION ASSY, 3SP Commercial
1 TRANSMISSION ASSY, 3SP Commercial
Position : 15
1 DECAL, Warning Euro Multi-Panel
1 DECAL, Warning Euro Multi-Panel
Position : 15
8 WASHER, 11/32” Flat
8 WASHER, 11/32” Flat
Position : 16
2 SUPPORT, Rear Axle
2 SUPPORT, Rear Axle
Position : 16
1 SPRING, Clutch (Also shown on Transmission
1 SPRING, Clutch (Also shown on Transmission
Position : 16
1 * LEVER, Transmission (Metal)
1 * LEVER, Transmission (Metal)
Position : 16
1 DECAL, OPC Bail International Symbol
1 DECAL, OPC Bail International Symbol
Position : 16
2 WASHER, 7/32” Flat
2 WASHER, 7/32” Flat
Position : 17
1 PUSHNUT, 1/4” Black
1 PUSHNUT, 1/4” Black
Position : 17
1 WELDMENT, Tie Bar
1 WELDMENT, Tie Bar
Position : 17
1 * SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
1 * SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 17
2 DECAL, Chute/International Warning
2 DECAL, Chute/International Warning
Position : 17
1 CONTROL PANEL (w/o El. Switch Hole)
1 CONTROL PANEL (w/o El. Switch Hole)
Position : 18
1 ROD, Trailing Shield Pivot (1/4” Dia. x 16-1/4” long)
1 ROD, Trailing Shield Pivot (1/4” Dia. x 16-1/4” long)
Position : 18
1 COTTER PIN, 1/8 x 3/4” was
1 COTTER PIN, 1/8 x 3/4” was
Position : 18
1 NUT, M10 x 1.50 Hex Nyloc
1 NUT, M10 x 1.50 Hex Nyloc
Position : 18
1 DECAL, Throttle Control, B&S
1 DECAL, Throttle Control, B&S
Position : 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
Position : 19
1 SHIELD, Trailing, Commercial Cast
1 SHIELD, Trailing, Commercial Cast
Position : 19
1 SPRING, Tie Bar
1 SPRING, Tie Bar
Position : 19
1 PULLEY, Transmission
1 PULLEY, Transmission
Position : 19
1 DECAL, Convertible Mower
1 DECAL, Convertible Mower
Position : 19
1 ROPE GUIDE (1/4-20 threads)
1 ROPE GUIDE (1/4-20 threads)
Position : 20
1 BAFFLE, Discharge
1 BAFFLE, Discharge
Position : 20
2 HUB CAP, Front Wheels
2 HUB CAP, Front Wheels
Position : 20
1 WASHER, Felt
1 WASHER, Felt
Position : 20
1 DECAL, Noise, 100 dB (shown)
1 DECAL, Noise, 100 dB (shown)
Position : 20
1 DECAL, Noise, 98 dB (not shown)
1 DECAL, Noise, 98 dB (not shown)
Position : 20
1 NUT, 1/4-20 Hex Nyloc
1 NUT, 1/4-20 Hex Nyloc
Position : 21
5 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
5 SCREW, #10-24 x 5/8” Slotted Hex Washer Head Self-Tap
Position : 21
2 BUSHING, Front Axle
2 BUSHING, Front Axle
Position : 21
1 KIT, Height Adjusting Lever (incl. items 22-24)
1 KIT, Height Adjusting Lever (incl. items 22-24)
Position : 21
1 DECAL, 2005 Year of Manufacture
1 DECAL, 2005 Year of Manufacture
Position : 21
1 DECAL, 2006 Year of Manufacture (not shown)
1 DECAL, 2006 Year of Manufacture (not shown)
Position : 21
1 DECAL, 2007 Year of Manufacture (not shown)
1 DECAL, 2007 Year of Manufacture (not shown)
Position : 21
1 * THROTTLE CONTROL, 7.0 HP B&S (48.5”)
1 * THROTTLE CONTROL, 7.0 HP B&S (48.5”)
Position : 22
1 * THROTTLE CONTROL, 6.75 HP B&S DOV (48.0”) used on Model ELP216753BDV
1 * THROTTLE CONTROL, 6.75 HP B&S DOV (48.0”) used on Model ELP216753BDV
Position : 22
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position : 22
1 WELDMENT, Front Axle
1 WELDMENT, Front Axle
Position : 22
2 NUT, #10-32 Hex Nyloc
2 NUT, #10-32 Hex Nyloc
Position : 22
2 THROTTLE KNOB
2 THROTTLE KNOB
Position : 23
2 IDLER SPACER
2 IDLER SPACER
Position : 23
1 SPRING, Axle Retaining RH
1 SPRING, Axle Retaining RH
Position : 23
1 LEVER, Height Adjusting (Black)
1 LEVER, Height Adjusting (Black)
Position : 23
4 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
4 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage
Position : 24
2 NUT, 3/8-16 Hex Flange Lock or
2 NUT, 3/8-16 Hex Flange Lock or
Position : 24
1 SPRING, Axle Retaining LH
1 SPRING, Axle Retaining LH
Position : 24
2 SCREW, #10-32 x 5/8, Hex Washer Self-Tap, GR
2 SCREW, #10-32 x 5/8, Hex Washer Self-Tap, GR
Position : 24
1 FOAM GRIP, 18.75”
1 FOAM GRIP, 18.75”
Position : 25
1 BELT GUIDE (Wireform)
1 BELT GUIDE (Wireform)
Position : 25
2 HUB CAP, 1-3/8: Diameter black
2 HUB CAP, 1-3/8: Diameter black
Position : 25
1 GRIP, Flat Bar
1 GRIP, Flat Bar
Position : 25
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
2 SCREW, 3/8-16 x 2” Hex Head Self-Tap
Position : 26
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.)
Position : 26
1 PINION, RH Drive
1 PINION, RH Drive
Position : 26
2 NUT, 3/8-16 Hex Center Lock
2 NUT, 3/8-16 Hex Center Lock
Position : 27
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
1 SET SCREW, 5/16-18 x 1/2” Hex Recess
Position : 27
1 PINION, LH Drive
1 PINION, LH Drive
Position : 27
6 WASHER, 5/16” Internal Tooth Lock
6 WASHER, 5/16” Internal Tooth Lock
Position : 28
1 KEY, Hi-Pro #HP506 (Briggs engine)
1 KEY, Hi-Pro #HP506 (Briggs engine)
Position : 28
2 WASHER, 17/32” Flat
2 WASHER, 17/32” Flat
Position : 28
1 * CONTROL, Speed Select
1 * CONTROL, Speed Select
Position : 29
2 NUT, 3/8-16 Hex Nyloc
2 NUT, 3/8-16 Hex Nyloc
Position : 29
2 SHIELD, Dust
2 SHIELD, Dust
Position : 29
2 SCREW, 5/16-18 x 2” Square Neck Curved Head
2 SCREW, 5/16-18 x 2” Square Neck Curved Head
Position : 30
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
1 HUB, Blade Drive, 25mm Internal Dia. (with integral key)
Position : 30
1 WELDMENT, Rear Axle
1 WELDMENT, Rear Axle
Position : 30
8 NUT, 5/16-18 Hex Nyloc
8 NUT, 5/16-18 Hex Nyloc
Position : 31
1 BLADE, 21” Bagging
1 BLADE, 21” Bagging
Position : 31
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
3 SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR
Position : 32
1 WASHER, 3/8” Split Lock (Heavy)
1 WASHER, 3/8” Split Lock (Heavy)
Position : 32
5 WASHER, 1/4” Internal Tooth Lock or
5 WASHER, 1/4” Internal Tooth Lock or
Position : 33
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
1 SCREW, 3/8-24 x 1-3/4” Hex Head Cap GR
Position : 33
5 NUT, 1/4-20 Hex or
5 NUT, 1/4-20 Hex or
Position : 34
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR
2 SCREW, 3/8-16 x 1” Hex Head Cap, GR
Position : 34
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
2 SCREW, 1/4-20 x 2” Hex Head Cap GR
Position : 35
2 BUSHING, .27 x .35 x .4 Flange
2 BUSHING, .27 x .35 x .4 Flange
Position : 36
1 PIN, 1/4 x 1-1/2”
1 PIN, 1/4 x 1-1/2”
Position : 37
1 PUSHNUT, 1/4”
1 PUSHNUT, 1/4”
Position : 38
1 CLAMP, Double Tube
1 CLAMP, Double Tube
Position : 39
2 KNOB, 5/16-18 Wing (Black)
2 KNOB, 5/16-18 Wing (Black)
Position : 40