Schemat rozstrzelony ep 217018 bv SNAPPER ep217018bv

Odkryj kompletny schemat rozstrzelony ep 217018 bv SNAPPER ep217018bv – niezbędny przewodnik do identyfikacji części zamiennych. Nasza prezentacja pomaga zrozumieć każdy element urządzenia ep 217018 bv. Szybko znajdź części do ep 217018 bv SNAPPER ep217018bv.

Asystent naprawy Powered by ChatGPT

Lista części zamiennych

1 HANDLE, Upper All
1 HANDLE, Upper All
Pozycja: 1
1 DECK, Mower (incl. painted “HV” Deck with Decals) P216018KWV, P216518B,
1 DECK, Mower (incl. painted “HV” Deck with Decals) P216018KWV, P216518B,
Pozycja: 1
1 ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B &
1 ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B &
Pozycja: 1
1 BEARING, 9/16” I.D. per Rear Wheel Arm
1 BEARING, 9/16” I.D. per Rear Wheel Arm
Pozycja: 1
2 WHEEL, 8 x 1.75 Plastic all
2 WHEEL, 8 x 1.75 Plastic all
Pozycja: 1
2 WHEEL, 10 x 1.75” Plastic Push Models only
2 WHEEL, 10 x 1.75” Plastic Push Models only
Pozycja: 1
1 BELT, Poly-V
1 BELT, Poly-V
Pozycja: 1
4 NUT, 5/16-18 Hex Lock was
4 NUT, 5/16-18 Hex Lock was
Pozycja: 1
1 ASSEMBLY, Bag Adapter & Cover (Euro models only) (Incl items 2 thru 9); used on
1 ASSEMBLY, Bag Adapter & Cover (Euro models only) (Incl items 2 thru 9); used on
Pozycja: 1
1 BATTERY, 12 Volt, 35 CCA
1 BATTERY, 12 Volt, 35 CCA
Pozycja: 1
1 DECAL, Easy Walk
1 DECAL, Easy Walk
Pozycja: 1
1 SCREEN, Fastener Assembly
1 SCREEN, Fastener Assembly
Pozycja: 1
2 LATCH, Frame Attachment
2 LATCH, Frame Attachment
Pozycja: 1
1 HANDLE, Middle All
1 HANDLE, Middle All
Pozycja: 2
10 NUT, 5/16-18 Hex Flange Lock, GR5
10 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 2
1 BOLT, 5/16-18 Hex Washer Face Shoulder per wheel arm assembly
1 BOLT, 5/16-18 Hex Washer Face Shoulder per wheel arm assembly
Pozycja: 2
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap per Rear Wheel Arm
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap per Rear Wheel Arm
Pozycja: 2
2 NUT, 7/16-20 Hex Center Lock Jam
2 NUT, 7/16-20 Hex Center Lock Jam
Pozycja: 2
2 WHEEL, 10 x 1.75” Plastic used on Self-Propelled models
2 WHEEL, 10 x 1.75” Plastic used on Self-Propelled models
Pozycja: 2
1 LINK, Differential
1 LINK, Differential
Pozycja: 2
1 WASHER, Cone
1 WASHER, Cone
Pozycja: 2
1 ADAPTER, Grass Bag
1 ADAPTER, Grass Bag
Pozycja: 2
1 GRASS BAG (Door w/Gray Letters) all
1 GRASS BAG (Door w/Gray Letters) all
Pozycja: 2
1 HARNESS, Battery
1 HARNESS, Battery
Pozycja: 2
1 DECAL, Throttle Control, KWV
1 DECAL, Throttle Control, KWV
Pozycja: 2
1 RING, Bottom (21.77” Inside Diameter)
1 RING, Bottom (21.77” Inside Diameter)
Pozycja: 2
1 HANDLE, Lower LH (Adjustable) All
1 HANDLE, Lower LH (Adjustable) All
Pozycja: 3
3 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
3 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
Pozycja: 3
1 LATCH, Height per wheel arm assembly
1 LATCH, Height per wheel arm assembly
Pozycja: 3
1 LATCH, Height Adjusting (long) per Rear Wheel Arm
1 LATCH, Height Adjusting (long) per Rear Wheel Arm
Pozycja: 3
2 BUSHING, Axle
2 BUSHING, Axle
Pozycja: 3
2 NUT, 7/16-20 Hex Center Lock Jam all
2 NUT, 7/16-20 Hex Center Lock Jam all
Pozycja: 3
1 ARM, Clutch Idler
1 ARM, Clutch Idler
Pozycja: 3
1 PULLEY, Poly-V Belt (3.5 O.D.)
1 PULLEY, Poly-V Belt (3.5 O.D.)
Pozycja: 3
1 COVER, Bag Adapter
1 COVER, Bag Adapter
Pozycja: 3
1 ASSEMBLY, Bag Wire (12” Wide) all
1 ASSEMBLY, Bag Wire (12” Wide) all
Pozycja: 3
2 SCREW, #10-24 x 1/2” Pan Head Machine
2 SCREW, #10-24 x 1/2” Pan Head Machine
Pozycja: 3
1 DECAL, Throttle Control, B&S
1 DECAL, Throttle Control, B&S
Pozycja: 3
3 NUT, 5/16-24 Hex, GR5 only 1 shown
3 NUT, 5/16-24 Hex, GR5 only 1 shown
Pozycja: 3
2 ROD, Tine
2 ROD, Tine
Pozycja: 3
1 HANDLE, Lower RH (Adjustable) All
1 HANDLE, Lower RH (Adjustable) All
Pozycja: 4
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage, GR
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage, GR
Pozycja: 4
1 GRIP, Height Latch per wheel arm assembly
1 GRIP, Height Latch per wheel arm assembly
Pozycja: 4
1 NUT, 1/4-20 Hex or
1 NUT, 1/4-20 Hex or
Pozycja: 4
2 WASHER, 7/16” Flat
2 WASHER, 7/16” Flat
Pozycja: 4
2 BUSHING, Axle Push Models only
2 BUSHING, Axle Push Models only
Pozycja: 4
1 PULLEY, Idler
1 PULLEY, Idler
Pozycja: 4
2 WASHER, 44 x .78 x .025 Curved
2 WASHER, 44 x .78 x .025 Curved
Pozycja: 4
1 HINGE, Chute Cover
1 HINGE, Chute Cover
Pozycja: 4
1 CONNECTOR, Grass Bag (weldment) all
1 CONNECTOR, Grass Bag (weldment) all
Pozycja: 4
2 NUT, #10-24 Square
2 NUT, #10-24 Square
Pozycja: 4
1 DECAL, Speed Shift
1 DECAL, Speed Shift
Pozycja: 4
3 WASHER, 5/16” Split Lock only 1 shown
3 WASHER, 5/16” Split Lock only 1 shown
Pozycja: 4
1 SUPPORT, Wheel
1 SUPPORT, Wheel
Pozycja: 4
1 BAIL, OPC Control All
1 BAIL, OPC Control All
Pozycja: 5
3 SCREW, 3/8-16 x 1” Self-Tapping engine mount bolts
3 SCREW, 3/8-16 x 1” Self-Tapping engine mount bolts
Pozycja: 5
6 NUT, 5/16-18 Hex Flange Lock, GR
6 NUT, 5/16-18 Hex Flange Lock, GR
Pozycja: 5
2 PLUG, Wheel all
2 PLUG, Wheel all
Pozycja: 5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap, GR
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap, GR
Pozycja: 5
1 ASSEMBLY, Right Housing (Incl. items 6, 7, 8, 9, 10 & 30)
1 ASSEMBLY, Right Housing (Incl. items 6, 7, 8, 9, 10 & 30)
Pozycja: 5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage, GR
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage, GR
Pozycja: 5
1 ADAPTER, Grass Bag used on Euro Self-Propelled
1 ADAPTER, Grass Bag used on Euro Self-Propelled
Pozycja: 5
1 DECAL, Chute/Deflector
1 DECAL, Chute/Deflector
Pozycja: 5
3 SPRING only 1 shown
3 SPRING only 1 shown
Pozycja: 5
1 TRAY, Tine
1 TRAY, Tine
Pozycja: 5
1 CLIP, Zone Control All
1 CLIP, Zone Control All
Pozycja: 6
2 PLUG, Hole, Polyethylene
2 PLUG, Hole, Polyethylene
Pozycja: 6
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Pozycja: 6
1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.
1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.
Pozycja: 6
1 NUT, 1/4-28 Hex Top Lock
1 NUT, 1/4-28 Hex Top Lock
Pozycja: 6
1 HOUSING, Right Side
1 HOUSING, Right Side
Pozycja: 6
5 WASHER, 1/4” Internal Tooth Lock
5 WASHER, 1/4” Internal Tooth Lock
Pozycja: 6
1 ASSEMBLY, Grass Bag Adapter Includes items 7 thru
1 ASSEMBLY, Grass Bag Adapter Includes items 7 thru
Pozycja: 6
1 KEY (Set of Two)
1 KEY (Set of Two)
Pozycja: 6
1 DECAL, Ignition Switch
1 DECAL, Ignition Switch
Pozycja: 6
6 KIT, Tine Thatching Spring
6 KIT, Tine Thatching Spring
Pozycja: 6
1 CABLE, Zone Control (52-63/64” Long) 216518B, P216518B,
1 CABLE, Zone Control (52-63/64” Long) 216518B, P216518B,
Pozycja: 7
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR
Pozycja: 7
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Pozycja: 7
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.
Pozycja: 7
4 BUSHING, 3/8” I.D. Nylon
4 BUSHING, 3/8” I.D. Nylon
Pozycja: 7
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
Pozycja: 7
5 NUT, 1/4-20 Hex
5 NUT, 1/4-20 Hex
Pozycja: 7
1 ADAPTER, Grass Bag used on Domestic Self-
1 ADAPTER, Grass Bag used on Domestic Self-
Pozycja: 7
1 BEZEL (Seal & Face Nut)
1 BEZEL (Seal & Face Nut)
Pozycja: 7
1 DECAL, Danger, Cut Finger
1 DECAL, Danger, Cut Finger
Pozycja: 7
1 BUSHING, Wheel Adjuster
1 BUSHING, Wheel Adjuster
Pozycja: 7
1 HANDLE, Clutch Self-Propelled Models
1 HANDLE, Clutch Self-Propelled Models
Pozycja: 8
1 BOLT, 5/16-18 x 2-1/4”, Hex Flange Lock
1 BOLT, 5/16-18 x 2-1/4”, Hex Flange Lock
Pozycja: 8
1 WELDMENT, Front Wheel Bracket 216518B, P216518B,
1 WELDMENT, Front Wheel Bracket 216518B, P216518B,
Pozycja: 8
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models
Pozycja: 8
1 SHAFT, Hex Drive
1 SHAFT, Hex Drive
Pozycja: 8
1 SEAL, 5/8” Internal Diameter
1 SEAL, 5/8” Internal Diameter
Pozycja: 8
1 STOP, Cover
1 STOP, Cover
Pozycja: 8
1 BRACKET, Rope Guide
1 BRACKET, Rope Guide
Pozycja: 8
1 COVER, Switch
1 COVER, Switch
Pozycja: 8
1 DECAL, Hi Vac
1 DECAL, Hi Vac
Pozycja: 8
1 AXLE, Wheel
1 AXLE, Wheel
Pozycja: 8
1 GRIP, International Symbol Self-Propelled Models
1 GRIP, International Symbol Self-Propelled Models
Pozycja: 9
1 BUSHING, .388 x .625 x 1.62
1 BUSHING, .388 x .625 x 1.62
Pozycja: 9
1 AXLE, 21”
1 AXLE, 21”
Pozycja: 9
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models
Pozycja: 9
1 PULLEY, Poly-V (2” O.D.) for non-Commercial models
1 PULLEY, Poly-V (2” O.D.) for non-Commercial models
Pozycja: 9
1 BEARING, Tapered- (Differential Housing)
1 BEARING, Tapered- (Differential Housing)
Pozycja: 9
1 MOULDING, Trim
1 MOULDING, Trim
Pozycja: 9
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
Pozycja: 9
1 NUT, 5/8-32 Hex Lock
1 NUT, 5/8-32 Hex Lock
Pozycja: 9
1 DECAL, Ninja
1 DECAL, Ninja
Pozycja: 9
1 WHEEL, 7.00 x 1.50 Gage
1 WHEEL, 7.00 x 1.50 Gage
Pozycja: 9
1 CABLE, Clutch Control (41-1/4” Long) Self-Propelled Models
1 CABLE, Clutch Control (41-1/4” Long) Self-Propelled Models
Pozycja: 10
1 COVER, Belt European models
1 COVER, Belt European models
Pozycja: 10
1 WHEEL ARM, R.H. Rear (round opening) (right rear) used on Push models
1 WHEEL ARM, R.H. Rear (round opening) (right rear) used on Push models
Pozycja: 10
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Pozycja: 10
1 BALL BEARING, 7/16 I.D., 1/1/8” O.D. was
1 BALL BEARING, 7/16 I.D., 1/1/8” O.D. was
Pozycja: 10
1 BUSHING, Flange, .381 x .625 x .62
1 BUSHING, Flange, .381 x .625 x .62
Pozycja: 10
1 SWITCH, Ignition (spring loaded ON/OFF 2 prong)
1 SWITCH, Ignition (spring loaded ON/OFF 2 prong)
Pozycja: 10
1 DECAL, Snapper
1 DECAL, Snapper
Pozycja: 10
10 NUT, 1/4-20 Hex Top Lock only 9 shown
10 NUT, 1/4-20 Hex Top Lock only 9 shown
Pozycja: 10
1 COVER, Vinyl Self-Propelled Models
1 COVER, Vinyl Self-Propelled Models
Pozycja: 11
3 WASHER, 7/16” Flat
3 WASHER, 7/16” Flat
Pozycja: 11
1 WHEEL ARM, L.H. Rear (square opening) (left rear) used on Push models
1 WHEEL ARM, L.H. Rear (square opening) (left rear) used on Push models
Pozycja: 11
1 SPRING, Idler- Torsion
1 SPRING, Idler- Torsion
Pozycja: 11
1 PLUG, Transmission Housing
1 PLUG, Transmission Housing
Pozycja: 11
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
Pozycja: 11
1 PULLEY, Nylon
1 PULLEY, Nylon
Pozycja: 11
1 SPACER
1 SPACER
Pozycja: 11
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Pozycja: 11
4 WASHER, 1/4” Flat
4 WASHER, 1/4” Flat
Pozycja: 11
1 SPRING, Clutch- 21S Self-Propelled Models
1 SPRING, Clutch- 21S Self-Propelled Models
Pozycja: 12
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
Pozycja: 12
1 ARM, Wheel, Right Rear used on Self-Propelled models
1 ARM, Wheel, Right Rear used on Self-Propelled models
Pozycja: 12
1 STUD, Idler (3/8-24 thread)
1 STUD, Idler (3/8-24 thread)
Pozycja: 12
1 GEAR, Input
1 GEAR, Input
Pozycja: 12
1 NUT, 5/16-18 Hex Flange Lock, GR
1 NUT, 5/16-18 Hex Flange Lock, GR
Pozycja: 12
1 WIRING HARNESS, B&S WBM similar to
1 WIRING HARNESS, B&S WBM similar to
Pozycja: 12
1 DECAL, 2004 Year of Mfg.
1 DECAL, 2004 Year of Mfg.
Pozycja: 12
2 SPRING, Compression
2 SPRING, Compression
Pozycja: 12
1 BRACKET, Shift All
1 BRACKET, Shift All
Pozycja: 13
2 WASHER, Cone
2 WASHER, Cone
Pozycja: 13
1 ARM, Wheel, Left Rear used on Self-Propelled models
1 ARM, Wheel, Left Rear used on Self-Propelled models
Pozycja: 13
1 HOLDER, Bearing (Inner Half)
1 HOLDER, Bearing (Inner Half)
Pozycja: 13
1 AXLE, Short
1 AXLE, Short
Pozycja: 13
3 WASHER, 15/32” Flat
3 WASHER, 15/32” Flat
Pozycja: 13
1 BRACKET, Battery
1 BRACKET, Battery
Pozycja: 13
1 DECAL,Euro Community (CE)
1 DECAL,Euro Community (CE)
Pozycja: 13
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
Pozycja: 13
2 TIE, Wire, 1.29 long, black Self-Propelled Models
2 TIE, Wire, 1.29 long, black Self-Propelled Models
Pozycja: 14
1 BOLT, 5/16-18 x 1” Shoulder per wheel arm assembly
1 BOLT, 5/16-18 x 1” Shoulder per wheel arm assembly
Pozycja: 14
1 BALL BEARING, Spherical O.D., .38 I.D.
1 BALL BEARING, Spherical O.D., .38 I.D.
Pozycja: 14
1 GEAR, Differential (46 Tooth)
1 GEAR, Differential (46 Tooth)
Pozycja: 14
3 RIVET, 3/16 x .344
3 RIVET, 3/16 x .344
Pozycja: 14
1 COVER, Battery
1 COVER, Battery
Pozycja: 14
1 DECAL, Spart Plug International Symbol
1 DECAL, Spart Plug International Symbol
Pozycja: 14
2 NUT, 1/4-20 Hex, GR5
2 NUT, 1/4-20 Hex, GR5
Pozycja: 14
1 BRACKET, Bell Crank Self-Propelled Models
1 BRACKET, Bell Crank Self-Propelled Models
Pozycja: 15
1 HUB, Blade Drive 25mm I.D.
1 HUB, Blade Drive 25mm I.D.
Pozycja: 15
2 RETAINER, 5/16” Bolt per wheel arm assembly
2 RETAINER, 5/16” Bolt per wheel arm assembly
Pozycja: 15
1 O-RING
1 O-RING
Pozycja: 15
2 PLATE, 46T Gear
2 PLATE, 46T Gear
Pozycja: 15
1 CHUTE, 21” Side P216018KWV
1 CHUTE, 21” Side P216018KWV
Pozycja: 15
1 PLUG, Chute Adapter P216018KWV, P217018BV,
1 PLUG, Chute Adapter P216018KWV, P217018BV,
Pozycja: 15
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Pozycja: 15
1 DECAL, Caution, Symbols
1 DECAL, Caution, Symbols
Pozycja: 15
2 CAP, Vinyl
2 CAP, Vinyl
Pozycja: 15
1 SPACER, .33 x .63 x .156 Self-Propelled Models
1 SPACER, .33 x .63 x .156 Self-Propelled Models
Pozycja: 16
1 KEY, Woodruff #HP-506 Hi-Pro
1 KEY, Woodruff #HP-506 Hi-Pro
Pozycja: 16
1 GRIP, Height Latch per wheel arm assembly
1 GRIP, Height Latch per wheel arm assembly
Pozycja: 16
1 NUT, 3/8-24 Hex Center Lock, GR
1 NUT, 3/8-24 Hex Center Lock, GR
Pozycja: 16
2 WASHER, Thrust, 3/4” I.D.
2 WASHER, Thrust, 3/4” I.D.
Pozycja: 16
2 WASHER, 5/16” Flat
2 WASHER, 5/16” Flat
Pozycja: 16
1 BRACE, Bag Adapter P216018KWV & RP216018KWV
1 BRACE, Bag Adapter P216018KWV & RP216018KWV
Pozycja: 16
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Pozycja: 16
1 DECAL, Noise (European)
1 DECAL, Noise (European)
Pozycja: 16
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
Pozycja: 16
1 BELL CRANK Self-Propelled Models
1 BELL CRANK Self-Propelled Models
Pozycja: 17
1 SET SCREW, 5/16-18 x 5/16” Hex Socket
1 SET SCREW, 5/16-18 x 5/16” Hex Socket
Pozycja: 17
1 BRACKET, Right Rear Wheel all
1 BRACKET, Right Rear Wheel all
Pozycja: 17
1 HOLDER, Bearing (Outer Half)
1 HOLDER, Bearing (Outer Half)
Pozycja: 17
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5
Pozycja: 17
2 WING-NUT, 5/16-18 Nyloc
2 WING-NUT, 5/16-18 Nyloc
Pozycja: 17
1 SCREW, M6 x 1.0 x 30MM Hex Head Cap P216018KWV & RP216018KWV
1 SCREW, M6 x 1.0 x 30MM Hex Head Cap P216018KWV & RP216018KWV
Pozycja: 17
1 CLIP, Wiring
1 CLIP, Wiring
Pozycja: 17
2 DECAL, Warning (Euro)
2 DECAL, Warning (Euro)
Pozycja: 17
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
Pozycja: 17
1 CONTROL PANEL (w/o Ground Drive Slot) 216518B
1 CONTROL PANEL (w/o Ground Drive Slot) 216518B
Pozycja: 18
1 PULLEY, Engine (25mm I. D. x 2-1/8” O.D.)
1 PULLEY, Engine (25mm I. D. x 2-1/8” O.D.)
Pozycja: 18
1 BRACKET, Left Rear Wheel all
1 BRACKET, Left Rear Wheel all
Pozycja: 18
1 WASHER, .28 x .63 x .06 Flat
1 WASHER, .28 x .63 x .06 Flat
Pozycja: 18
1 GASKET, Housing
1 GASKET, Housing
Pozycja: 18
1 COVER, 21” Deck RP217018BV, RP217018BVE,
1 COVER, 21” Deck RP217018BV, RP217018BVE,
Pozycja: 18
1 SLEEVE, .237/.242 I.D. x .3135/.3185 O.D. x .748 not shown; P216018KWV &
1 SLEEVE, .237/.242 I.D. x .3135/.3185 O.D. x .748 not shown; P216018KWV &
Pozycja: 18
1 CHARGER, Battery (120 Volt; 60 Hertz)
1 CHARGER, Battery (120 Volt; 60 Hertz)
Pozycja: 18
1 DECAL, OPEI Walk/Ride
1 DECAL, OPEI Walk/Ride
Pozycja: 18
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
Pozycja: 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx) All
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx) All
Pozycja: 19
6 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap EP217018BV & ERP217018BV
6 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap EP217018BV & ERP217018BV
Pozycja: 19
1 AXLE, 21” qty. 2 on push models; qty. 1 on
1 AXLE, 21” qty. 2 on push models; qty. 1 on
Pozycja: 19
1 COTTER PIN, .06 x .50
1 COTTER PIN, .06 x .50
Pozycja: 19
3 WASHER, 5/16” Internal/External Tooth Lock
3 WASHER, 5/16” Internal/External Tooth Lock
Pozycja: 19
2 NUT, 5/16-18 Hex Large Flange Center Lock
2 NUT, 5/16-18 Hex Large Flange Center Lock
Pozycja: 19
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Pozycja: 19
1 DECAL, Warning
1 DECAL, Warning
Pozycja: 19
6 WASHER, Reinforcing only 1 shown
6 WASHER, Reinforcing only 1 shown
Pozycja: 19
1 WASHER, .33 x .88 x .09 Flat Self-Propelled Models
1 WASHER, .33 x .88 x .09 Flat Self-Propelled Models
Pozycja: 20
1 WELDMENT, Fender European models
1 WELDMENT, Fender European models
Pozycja: 20
1 FOOT GUARD, Long, Rear Push Models only
1 FOOT GUARD, Long, Rear Push Models only
Pozycja: 20
1 BELT, Engine Drive (Stretch)
1 BELT, Engine Drive (Stretch)
Pozycja: 20
1 BRACKET, Differential
1 BRACKET, Differential
Pozycja: 20
2 DECAL, Deck/Chute International Warning
2 DECAL, Deck/Chute International Warning
Pozycja: 20
6 WASHER, 5/16” Split Lock only 1 shown
6 WASHER, 5/16” Split Lock only 1 shown
Pozycja: 20
1 SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5 Self-Propelled Models
1 SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5 Self-Propelled Models
Pozycja: 21
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Pozycja: 21
1 FOOT GUARD, Rear used on Domestic Self-
1 FOOT GUARD, Rear used on Domestic Self-
Pozycja: 21
1 THRUST PLATE, Short
1 THRUST PLATE, Short
Pozycja: 21
4 SCREW, 1/4-20 x 1” Hex Washer Self-Tap
4 SCREW, 1/4-20 x 1” Hex Washer Self-Tap
Pozycja: 21
1 DECAL, OPC Bail (International Symbol)
1 DECAL, OPC Bail (International Symbol)
Pozycja: 21
6 NUT, 5/16-18 Hex, GR5 only 1 shown
6 NUT, 5/16-18 Hex, GR5 only 1 shown
Pozycja: 21
1 TEENUT, 5/16-18 Self-Propelled Models
1 TEENUT, 5/16-18 Self-Propelled Models
Pozycja: 22
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Pozycja: 22
1 RING, Split (Black) used on Self-Propelled models
1 RING, Split (Black) used on Self-Propelled models
Pozycja: 22
2 RETAINING RING, .625 External
2 RETAINING RING, .625 External
Pozycja: 22
1 SPACER, Axle Gear
1 SPACER, Axle Gear
Pozycja: 22
1 DECAL, Patent Numbers not shown
1 DECAL, Patent Numbers not shown
Pozycja: 22
2 NUT, 1/2” Push
2 NUT, 1/2” Push
Pozycja: 22
1 BUSHING, Differential, .328 x .625 x .41 Self-Propelled Models
1 BUSHING, Differential, .328 x .625 x .41 Self-Propelled Models
Pozycja: 23
3 NUT, 5/16-18 Hex Flange Lock, GR
3 NUT, 5/16-18 Hex Flange Lock, GR
Pozycja: 23
1 SUPPORT, Foot Guard used on Self-Propelled models
1 SUPPORT, Foot Guard used on Self-Propelled models
Pozycja: 23
1 BALL BEARING- 3/4” Bore
1 BALL BEARING- 3/4” Bore
Pozycja: 23
1 ASSEMBLY, Long Axle
1 ASSEMBLY, Long Axle
Pozycja: 23
4 BEARING, Nyliner
4 BEARING, Nyliner
Pozycja: 23
3 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 All
3 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 All
Pozycja: 24
2 AIR LIFT
2 AIR LIFT
Pozycja: 24
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
Pozycja: 24
1 GUIDE, Thrust Plate (3/8-24 thread)
1 GUIDE, Thrust Plate (3/8-24 thread)
Pozycja: 24
4 GEAR, Pinion (12 tooth)
4 GEAR, Pinion (12 tooth)
Pozycja: 24
1 SCREW, 5/16-18 x 1/4” Set
1 SCREW, 5/16-18 x 1/4” Set
Pozycja: 24
2 NUT, 5/16-18 Hex Flange Lock, GR5 All
2 NUT, 5/16-18 Hex Flange Lock, GR5 All
Pozycja: 25
4 WASHER, 5/16” Internal Tooth Lock
4 WASHER, 5/16” Internal Tooth Lock
Pozycja: 25
1 WASHER, 1/4” Internal Tooth Lock
1 WASHER, 1/4” Internal Tooth Lock
Pozycja: 25
1 SHIELD, Hex Shaft European models only
1 SHIELD, Hex Shaft European models only
Pozycja: 25
4 SPACER, Pinion Gear
4 SPACER, Pinion Gear
Pozycja: 25
2 WASHER, 1/2” Flat
2 WASHER, 1/2” Flat
Pozycja: 25
1 NUT, 5/16-18 Hex Center Lock Self-Propelled Models
1 NUT, 5/16-18 Hex Center Lock Self-Propelled Models
Pozycja: 26
4 NUT, 5/16-24 Hex, GR
4 NUT, 5/16-24 Hex, GR
Pozycja: 26
2 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
2 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
Pozycja: 26
1 BALL JOINT, 1/4-28 not shown; see Handles &
1 BALL JOINT, 1/4-28 not shown; see Handles &
Pozycja: 26
4 SHAFT, Pinion
4 SHAFT, Pinion
Pozycja: 26
1 DECAL, Adjustment
1 DECAL, Adjustment
Pozycja: 26
1 LEVER, Shift Self-Propelled Models
1 LEVER, Shift Self-Propelled Models
Pozycja: 27
4 SCREW, 5/16-24 x 21/32” Machine
4 SCREW, 5/16-24 x 21/32” Machine
Pozycja: 27
2 NUT, 1/4-28 Hex not shown; see Handles &
2 NUT, 1/4-28 Hex not shown; see Handles &
Pozycja: 27
4 NUT, #10-32 Hex Nyloc
4 NUT, #10-32 Hex Nyloc
Pozycja: 27
1 DECAL, Thatcherizer
1 DECAL, Thatcherizer
Pozycja: 27
1 NUT, 5/16-24 Hex Center Lock GR5 All
1 NUT, 5/16-24 Hex Center Lock GR5 All
Pozycja: 28
3 SPACER, .06 Thick for blade hub
3 SPACER, .06 Thick for blade hub
Pozycja: 28
1 LINK, Transfer (1/4-28 thread)
1 LINK, Transfer (1/4-28 thread)
Pozycja: 28
1 ASSY, Left Housing (Phantom)
1 ASSY, Left Housing (Phantom)
Pozycja: 28
1 CLIP, Wiring Harness All
1 CLIP, Wiring Harness All
Pozycja: 29
1 COVER, Belt
1 COVER, Belt
Pozycja: 29
1 WASHER, 3/4” Shim
1 WASHER, 3/4” Shim
Pozycja: 29
1 HOUSING, Left
1 HOUSING, Left
Pozycja: 29
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 All
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 All
Pozycja: 30
3 PLUG, 5/16” Square Hole Push Models
3 PLUG, 5/16” Square Hole Push Models
Pozycja: 30
3 WASHER, 3/8” Internal Tooth Lock
3 WASHER, 3/8” Internal Tooth Lock
Pozycja: 30
3 GASKET, 5/8” O. D.
3 GASKET, 5/8” O. D.
Pozycja: 30
4 KNOB, 5/16-18 Wing (Black) All
4 KNOB, 5/16-18 Wing (Black) All
Pozycja: 31
2 PLUG, 5/16” Round Hole qty. 3 on Push Models
2 PLUG, 5/16” Round Hole qty. 3 on Push Models
Pozycja: 31
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Pozycja: 31
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 All
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 All
Pozycja: 32
1 DECAL, Caution, International Symbols European models
1 DECAL, Caution, International Symbols European models
Pozycja: 32
2 NUT, 3/8-24 Hex
2 NUT, 3/8-24 Hex
Pozycja: 32
3 WASHER, 1/4” Internal Tooth Lock All
3 WASHER, 1/4” Internal Tooth Lock All
Pozycja: 33
1 NUT, 5/16-18 Hex Large Flange Center Lock
1 NUT, 5/16-18 Hex Large Flange Center Lock
Pozycja: 33
1 SPRING, Clutch- 21S
1 SPRING, Clutch- 21S
Pozycja: 33
3 NUT, 1/4-20 Hex All
3 NUT, 1/4-20 Hex All
Pozycja: 34
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
Pozycja: 35
1 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
1 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
Pozycja: 35
2 BUSHING, .27 x .35 x .4 Flange Self-Propelled Models
2 BUSHING, .27 x .35 x .4 Flange Self-Propelled Models
Pozycja: 36
2 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap
2 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap
Pozycja: 36
1 PIN, 1/4 x 1-1/2” Self-Propelled Models
1 PIN, 1/4 x 1-1/2” Self-Propelled Models
Pozycja: 37
1 COTTER PIN, 3/32 x 1/2”
1 COTTER PIN, 3/32 x 1/2”
Pozycja: 37
1 PUSH-NUT, 1/4” Self-Propelled Models
1 PUSH-NUT, 1/4” Self-Propelled Models
Pozycja: 38
1 BUSHING, Powdered Metal
1 BUSHING, Powdered Metal
Pozycja: 38
2 BALL JOINT, 1/4-28 Self-Propelled Models
2 BALL JOINT, 1/4-28 Self-Propelled Models
Pozycja: 39
1 DISC, Driven (Cantilever)
1 DISC, Driven (Cantilever)
Pozycja: 39
4 NUT, 1/4-28 Hex Self-Propelled Models
4 NUT, 1/4-28 Hex Self-Propelled Models
Pozycja: 40
1 WASHER, 44 x .78 x .025 Curved
1 WASHER, 44 x .78 x .025 Curved
Pozycja: 40
1 FOAM GRIP, 15” long All
1 FOAM GRIP, 15” long All
Pozycja: 41
1 RETAINER, 3/8” Bolt
1 RETAINER, 3/8” Bolt
Pozycja: 41
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 Self-Propelled Models
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 Self-Propelled Models
Pozycja: 42
1 SPRING, Wheel Drive
1 SPRING, Wheel Drive
Pozycja: 42
1 NUT, 3/8-16 Hex Center Lock All
1 NUT, 3/8-16 Hex Center Lock All
Pozycja: 43
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Pozycja: 43
4 WASHER, 5/16” Internal Tooth Lock All
4 WASHER, 5/16” Internal Tooth Lock All
Pozycja: 44
8 WASHER, 7/16” Flat Self-Propelled Models
8 WASHER, 7/16” Flat Self-Propelled Models
Pozycja: 45
2 BUSHING, Flange, .381 x .625 x .62
2 BUSHING, Flange, .381 x .625 x .62
Pozycja: 45
2 WASHER, Nylon Self-Propelled Models
2 WASHER, Nylon Self-Propelled Models
Pozycja: 46
1 SPACER, .500 x .65 x 1.75
1 SPACER, .500 x .65 x 1.75
Pozycja: 46
1 ROD, Speed Control (1/4-28 thread) Self-Propelled Models
1 ROD, Speed Control (1/4-28 thread) Self-Propelled Models
Pozycja: 47
1 GUIDE, Rope (1/4-20 thread) All
1 GUIDE, Rope (1/4-20 thread) All
Pozycja: 48
1 WASHER, 5/16” Internal Tooth Lock
1 WASHER, 5/16” Internal Tooth Lock
Pozycja: 48
1 NUT, 1/4-28 Hex GR5 or B All
1 NUT, 1/4-28 Hex GR5 or B All
Pozycja: 49
2 CABLE-TIE, 7” Self-Propelled Models
2 CABLE-TIE, 7” Self-Propelled Models
Pozycja: 50
1 THROTTLE CONTROL, .48 x .61 Briggs models; see also Throttle
1 THROTTLE CONTROL, .48 x .61 Briggs models; see also Throttle
Pozycja: 51
1 THROTTLE KNOB All
1 THROTTLE KNOB All
Pozycja: 52
1 KNOB, Shift Self-Propelled Models
1 KNOB, Shift Self-Propelled Models
Pozycja: 53
1 CLAMP, 7/8” Double Cable Self-Propelled Models
1 CLAMP, 7/8” Double Cable Self-Propelled Models
Pozycja: 54
1 SCREW, #8-32 x 1/2” Cross Recess Filister Head Machine Self-Propelled Models
1 SCREW, #8-32 x 1/2” Cross Recess Filister Head Machine Self-Propelled Models
Pozycja: 55
1 NUT, #8-32 Hex Self-Propelled Models
1 NUT, #8-32 Hex Self-Propelled Models
Pozycja: 56
1 BELT GUIDE, Lower Self-Propelled Models
1 BELT GUIDE, Lower Self-Propelled Models
Pozycja: 57
1 WASHER, Belleville Self-Propelled Models
1 WASHER, Belleville Self-Propelled Models
Pozycja: 58
4 WASHER, 1/4” Internal Tooth Lock Self-Propelled Models
4 WASHER, 1/4” Internal Tooth Lock Self-Propelled Models
Pozycja: 59
1 WASHER, 3/8” Flat Self-Propelled Models
1 WASHER, 3/8” Flat Self-Propelled Models
Pozycja: 60
1 COTTER PIN, 5/16 Self Lock Self-Propelled Models
1 COTTER PIN, 5/16 Self Lock Self-Propelled Models
Pozycja: 61
1 DECAL, Easy Walk All
1 DECAL, Easy Walk All
Pozycja: 62
1 CLAMP, Casing models with Briggs Engine
1 CLAMP, Casing models with Briggs Engine
Pozycja: 63
1 SCREW,#10-32 x 5/8” Self-Tap models with Briggs Engine
1 SCREW,#10-32 x 5/8” Self-Tap models with Briggs Engine
Pozycja: 64
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 All
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 All
Pozycja: 65