Vue éclatée ep 217018 bv SNAPPER ep217018bv

Découvrez la vue éclatée complète ep 217018 bv SNAPPER ep217018bv, un guide indispensable pour identifier facilement toutes les pièces détachées de votre appareil. Que vous soyez à la recherche d'une pièce en particulier ou simplement pour vous aider à la réparation, notre présentation détaillée vous aide à comprendre chaque composant de votre ep 217018 bv. Optimisez la maintenance et la réparation de votre appareil grâce à des schémas précis et des références adaptées. Trouvez rapidement les pièces qu'il vous faut pour prolonger la durée de vie de votre ep 217018 bv SNAPPER ep217018bv et éviter les pannes imprévues.

Assistant réparation Powered by ChatGPT

Liste des pièces détachées

1 HANDLE, Upper All
1 HANDLE, Upper All
Position : 1
1 DECK, Mower (incl. painted “HV” Deck with Decals) P216018KWV, P216518B,
1 DECK, Mower (incl. painted “HV” Deck with Decals) P216018KWV, P216518B,
Position : 1
1 ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B &
1 ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B &
Position : 1
1 BEARING, 9/16” I.D. per Rear Wheel Arm
1 BEARING, 9/16” I.D. per Rear Wheel Arm
Position : 1
2 WHEEL, 8 x 1.75 Plastic all
2 WHEEL, 8 x 1.75 Plastic all
Position : 1
2 WHEEL, 10 x 1.75” Plastic Push Models only
2 WHEEL, 10 x 1.75” Plastic Push Models only
Position : 1
1 BELT, Poly-V
1 BELT, Poly-V
Position : 1
4 NUT, 5/16-18 Hex Lock was
4 NUT, 5/16-18 Hex Lock was
Position : 1
1 ASSEMBLY, Bag Adapter & Cover (Euro models only) (Incl items 2 thru 9); used on
1 ASSEMBLY, Bag Adapter & Cover (Euro models only) (Incl items 2 thru 9); used on
Position : 1
1 BATTERY, 12 Volt, 35 CCA
1 BATTERY, 12 Volt, 35 CCA
Position : 1
1 DECAL, Easy Walk
1 DECAL, Easy Walk
Position : 1
1 SCREEN, Fastener Assembly
1 SCREEN, Fastener Assembly
Position : 1
2 LATCH, Frame Attachment
2 LATCH, Frame Attachment
Position : 1
1 HANDLE, Middle All
1 HANDLE, Middle All
Position : 2
10 NUT, 5/16-18 Hex Flange Lock, GR5
10 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 2
1 BOLT, 5/16-18 Hex Washer Face Shoulder per wheel arm assembly
1 BOLT, 5/16-18 Hex Washer Face Shoulder per wheel arm assembly
Position : 2
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap per Rear Wheel Arm
3 SCREW, #10-32 x 3/8” Hex Washer Self-Tap per Rear Wheel Arm
Position : 2
2 NUT, 7/16-20 Hex Center Lock Jam
2 NUT, 7/16-20 Hex Center Lock Jam
Position : 2
2 WHEEL, 10 x 1.75” Plastic used on Self-Propelled models
2 WHEEL, 10 x 1.75” Plastic used on Self-Propelled models
Position : 2
1 LINK, Differential
1 LINK, Differential
Position : 2
1 WASHER, Cone
1 WASHER, Cone
Position : 2
1 ADAPTER, Grass Bag
1 ADAPTER, Grass Bag
Position : 2
1 GRASS BAG (Door w/Gray Letters) all
1 GRASS BAG (Door w/Gray Letters) all
Position : 2
1 HARNESS, Battery
1 HARNESS, Battery
Position : 2
1 DECAL, Throttle Control, KWV
1 DECAL, Throttle Control, KWV
Position : 2
1 RING, Bottom (21.77” Inside Diameter)
1 RING, Bottom (21.77” Inside Diameter)
Position : 2
1 HANDLE, Lower LH (Adjustable) All
1 HANDLE, Lower LH (Adjustable) All
Position : 3
3 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
3 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
Position : 3
1 LATCH, Height per wheel arm assembly
1 LATCH, Height per wheel arm assembly
Position : 3
1 LATCH, Height Adjusting (long) per Rear Wheel Arm
1 LATCH, Height Adjusting (long) per Rear Wheel Arm
Position : 3
2 BUSHING, Axle
2 BUSHING, Axle
Position : 3
2 NUT, 7/16-20 Hex Center Lock Jam all
2 NUT, 7/16-20 Hex Center Lock Jam all
Position : 3
1 ARM, Clutch Idler
1 ARM, Clutch Idler
Position : 3
1 PULLEY, Poly-V Belt (3.5 O.D.)
1 PULLEY, Poly-V Belt (3.5 O.D.)
Position : 3
1 COVER, Bag Adapter
1 COVER, Bag Adapter
Position : 3
1 ASSEMBLY, Bag Wire (12” Wide) all
1 ASSEMBLY, Bag Wire (12” Wide) all
Position : 3
2 SCREW, #10-24 x 1/2” Pan Head Machine
2 SCREW, #10-24 x 1/2” Pan Head Machine
Position : 3
1 DECAL, Throttle Control, B&S
1 DECAL, Throttle Control, B&S
Position : 3
3 NUT, 5/16-24 Hex, GR5 only 1 shown
3 NUT, 5/16-24 Hex, GR5 only 1 shown
Position : 3
2 ROD, Tine
2 ROD, Tine
Position : 3
1 HANDLE, Lower RH (Adjustable) All
1 HANDLE, Lower RH (Adjustable) All
Position : 4
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage, GR
1 BOLT, 5/16-18 x 1-1/8” Short Neck Carriage, GR
Position : 4
1 GRIP, Height Latch per wheel arm assembly
1 GRIP, Height Latch per wheel arm assembly
Position : 4
1 NUT, 1/4-20 Hex or
1 NUT, 1/4-20 Hex or
Position : 4
2 WASHER, 7/16” Flat
2 WASHER, 7/16” Flat
Position : 4
2 BUSHING, Axle Push Models only
2 BUSHING, Axle Push Models only
Position : 4
1 PULLEY, Idler
1 PULLEY, Idler
Position : 4
2 WASHER, 44 x .78 x .025 Curved
2 WASHER, 44 x .78 x .025 Curved
Position : 4
1 HINGE, Chute Cover
1 HINGE, Chute Cover
Position : 4
1 CONNECTOR, Grass Bag (weldment) all
1 CONNECTOR, Grass Bag (weldment) all
Position : 4
2 NUT, #10-24 Square
2 NUT, #10-24 Square
Position : 4
1 DECAL, Speed Shift
1 DECAL, Speed Shift
Position : 4
3 WASHER, 5/16” Split Lock only 1 shown
3 WASHER, 5/16” Split Lock only 1 shown
Position : 4
1 SUPPORT, Wheel
1 SUPPORT, Wheel
Position : 4
1 BAIL, OPC Control All
1 BAIL, OPC Control All
Position : 5
3 SCREW, 3/8-16 x 1” Self-Tapping engine mount bolts
3 SCREW, 3/8-16 x 1” Self-Tapping engine mount bolts
Position : 5
6 NUT, 5/16-18 Hex Flange Lock, GR
6 NUT, 5/16-18 Hex Flange Lock, GR
Position : 5
2 PLUG, Wheel all
2 PLUG, Wheel all
Position : 5
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap, GR
1 SCREW, 1/4-28 x 1-3/8” Hex Head Cap, GR
Position : 5
1 ASSEMBLY, Right Housing (Incl. items 6, 7, 8, 9, 10 & 30)
1 ASSEMBLY, Right Housing (Incl. items 6, 7, 8, 9, 10 & 30)
Position : 5
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage, GR
5 BOLT, 1/4-20 x 1/2” Short Neck Carriage, GR
Position : 5
1 ADAPTER, Grass Bag used on Euro Self-Propelled
1 ADAPTER, Grass Bag used on Euro Self-Propelled
Position : 5
1 DECAL, Chute/Deflector
1 DECAL, Chute/Deflector
Position : 5
3 SPRING only 1 shown
3 SPRING only 1 shown
Position : 5
1 TRAY, Tine
1 TRAY, Tine
Position : 5
1 CLIP, Zone Control All
1 CLIP, Zone Control All
Position : 6
2 PLUG, Hole, Polyethylene
2 PLUG, Hole, Polyethylene
Position : 6
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Position : 6
1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.
1 ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl.
Position : 6
1 NUT, 1/4-28 Hex Top Lock
1 NUT, 1/4-28 Hex Top Lock
Position : 6
1 HOUSING, Right Side
1 HOUSING, Right Side
Position : 6
5 WASHER, 1/4” Internal Tooth Lock
5 WASHER, 1/4” Internal Tooth Lock
Position : 6
1 ASSEMBLY, Grass Bag Adapter Includes items 7 thru
1 ASSEMBLY, Grass Bag Adapter Includes items 7 thru
Position : 6
1 KEY (Set of Two)
1 KEY (Set of Two)
Position : 6
1 DECAL, Ignition Switch
1 DECAL, Ignition Switch
Position : 6
6 KIT, Tine Thatching Spring
6 KIT, Tine Thatching Spring
Position : 6
1 CABLE, Zone Control (52-63/64” Long) 216518B, P216518B,
1 CABLE, Zone Control (52-63/64” Long) 216518B, P216518B,
Position : 7
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR
1 SCREW, 5/16-18 x 1/2” Hex Head Cap, GR
Position : 7
2 NUT, 5/16-18 Hex Flange Lock, GR
2 NUT, 5/16-18 Hex Flange Lock, GR
Position : 7
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.
1 ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl.
Position : 7
4 BUSHING, 3/8” I.D. Nylon
4 BUSHING, 3/8” I.D. Nylon
Position : 7
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
3 SCREW, 5/16-24 x 1-1/8” Rib Neck, GR5
Position : 7
5 NUT, 1/4-20 Hex
5 NUT, 1/4-20 Hex
Position : 7
1 ADAPTER, Grass Bag used on Domestic Self-
1 ADAPTER, Grass Bag used on Domestic Self-
Position : 7
1 BEZEL (Seal & Face Nut)
1 BEZEL (Seal & Face Nut)
Position : 7
1 DECAL, Danger, Cut Finger
1 DECAL, Danger, Cut Finger
Position : 7
1 BUSHING, Wheel Adjuster
1 BUSHING, Wheel Adjuster
Position : 7
1 HANDLE, Clutch Self-Propelled Models
1 HANDLE, Clutch Self-Propelled Models
Position : 8
1 BOLT, 5/16-18 x 2-1/4”, Hex Flange Lock
1 BOLT, 5/16-18 x 2-1/4”, Hex Flange Lock
Position : 8
1 WELDMENT, Front Wheel Bracket 216518B, P216518B,
1 WELDMENT, Front Wheel Bracket 216518B, P216518B,
Position : 8
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models
1 ASSEMBLY, Wheel Arm, Right Rear used on Self-Propelled models
Position : 8
1 SHAFT, Hex Drive
1 SHAFT, Hex Drive
Position : 8
1 SEAL, 5/8” Internal Diameter
1 SEAL, 5/8” Internal Diameter
Position : 8
1 STOP, Cover
1 STOP, Cover
Position : 8
1 BRACKET, Rope Guide
1 BRACKET, Rope Guide
Position : 8
1 COVER, Switch
1 COVER, Switch
Position : 8
1 DECAL, Hi Vac
1 DECAL, Hi Vac
Position : 8
1 AXLE, Wheel
1 AXLE, Wheel
Position : 8
1 GRIP, International Symbol Self-Propelled Models
1 GRIP, International Symbol Self-Propelled Models
Position : 9
1 BUSHING, .388 x .625 x 1.62
1 BUSHING, .388 x .625 x 1.62
Position : 9
1 AXLE, 21”
1 AXLE, 21”
Position : 9
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models
1 ASSEMBLY, Wheel Arm, Left Rear used on Self-Propelled models
Position : 9
1 PULLEY, Poly-V (2” O.D.) for non-Commercial models
1 PULLEY, Poly-V (2” O.D.) for non-Commercial models
Position : 9
1 BEARING, Tapered- (Differential Housing)
1 BEARING, Tapered- (Differential Housing)
Position : 9
1 MOULDING, Trim
1 MOULDING, Trim
Position : 9
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
1 SCREW, 5/16-18 x 1-1/4” Pan Head Machine
Position : 9
1 NUT, 5/8-32 Hex Lock
1 NUT, 5/8-32 Hex Lock
Position : 9
1 DECAL, Ninja
1 DECAL, Ninja
Position : 9
1 WHEEL, 7.00 x 1.50 Gage
1 WHEEL, 7.00 x 1.50 Gage
Position : 9
1 CABLE, Clutch Control (41-1/4” Long) Self-Propelled Models
1 CABLE, Clutch Control (41-1/4” Long) Self-Propelled Models
Position : 10
1 COVER, Belt European models
1 COVER, Belt European models
Position : 10
1 WHEEL ARM, R.H. Rear (round opening) (right rear) used on Push models
1 WHEEL ARM, R.H. Rear (round opening) (right rear) used on Push models
Position : 10
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Position : 10
1 BALL BEARING, 7/16 I.D., 1/1/8” O.D. was
1 BALL BEARING, 7/16 I.D., 1/1/8” O.D. was
Position : 10
1 BUSHING, Flange, .381 x .625 x .62
1 BUSHING, Flange, .381 x .625 x .62
Position : 10
1 SWITCH, Ignition (spring loaded ON/OFF 2 prong)
1 SWITCH, Ignition (spring loaded ON/OFF 2 prong)
Position : 10
1 DECAL, Snapper
1 DECAL, Snapper
Position : 10
10 NUT, 1/4-20 Hex Top Lock only 9 shown
10 NUT, 1/4-20 Hex Top Lock only 9 shown
Position : 10
1 COVER, Vinyl Self-Propelled Models
1 COVER, Vinyl Self-Propelled Models
Position : 11
3 WASHER, 7/16” Flat
3 WASHER, 7/16” Flat
Position : 11
1 WHEEL ARM, L.H. Rear (square opening) (left rear) used on Push models
1 WHEEL ARM, L.H. Rear (square opening) (left rear) used on Push models
Position : 11
1 SPRING, Idler- Torsion
1 SPRING, Idler- Torsion
Position : 11
1 PLUG, Transmission Housing
1 PLUG, Transmission Housing
Position : 11
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
1 SPACER, .316 I.D. x .375 O.D. x .310 thick
Position : 11
1 PULLEY, Nylon
1 PULLEY, Nylon
Position : 11
1 SPACER
1 SPACER
Position : 11
1 DECAL, Warning (Deck)
1 DECAL, Warning (Deck)
Position : 11
4 WASHER, 1/4” Flat
4 WASHER, 1/4” Flat
Position : 11
1 SPRING, Clutch- 21S Self-Propelled Models
1 SPRING, Clutch- 21S Self-Propelled Models
Position : 12
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
1 SCREW, 3/8-24 x 2” Hex Head Cap, GR
Position : 12
1 ARM, Wheel, Right Rear used on Self-Propelled models
1 ARM, Wheel, Right Rear used on Self-Propelled models
Position : 12
1 STUD, Idler (3/8-24 thread)
1 STUD, Idler (3/8-24 thread)
Position : 12
1 GEAR, Input
1 GEAR, Input
Position : 12
1 NUT, 5/16-18 Hex Flange Lock, GR
1 NUT, 5/16-18 Hex Flange Lock, GR
Position : 12
1 WIRING HARNESS, B&S WBM similar to
1 WIRING HARNESS, B&S WBM similar to
Position : 12
1 DECAL, 2004 Year of Mfg.
1 DECAL, 2004 Year of Mfg.
Position : 12
2 SPRING, Compression
2 SPRING, Compression
Position : 12
1 BRACKET, Shift All
1 BRACKET, Shift All
Position : 13
2 WASHER, Cone
2 WASHER, Cone
Position : 13
1 ARM, Wheel, Left Rear used on Self-Propelled models
1 ARM, Wheel, Left Rear used on Self-Propelled models
Position : 13
1 HOLDER, Bearing (Inner Half)
1 HOLDER, Bearing (Inner Half)
Position : 13
1 AXLE, Short
1 AXLE, Short
Position : 13
3 WASHER, 15/32” Flat
3 WASHER, 15/32” Flat
Position : 13
1 BRACKET, Battery
1 BRACKET, Battery
Position : 13
1 DECAL,Euro Community (CE)
1 DECAL,Euro Community (CE)
Position : 13
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
2 BOLT, 1/4-20 x 1-1/4” Hex, GR5
Position : 13
2 TIE, Wire, 1.29 long, black Self-Propelled Models
2 TIE, Wire, 1.29 long, black Self-Propelled Models
Position : 14
1 BOLT, 5/16-18 x 1” Shoulder per wheel arm assembly
1 BOLT, 5/16-18 x 1” Shoulder per wheel arm assembly
Position : 14
1 BALL BEARING, Spherical O.D., .38 I.D.
1 BALL BEARING, Spherical O.D., .38 I.D.
Position : 14
1 GEAR, Differential (46 Tooth)
1 GEAR, Differential (46 Tooth)
Position : 14
3 RIVET, 3/16 x .344
3 RIVET, 3/16 x .344
Position : 14
1 COVER, Battery
1 COVER, Battery
Position : 14
1 DECAL, Spart Plug International Symbol
1 DECAL, Spart Plug International Symbol
Position : 14
2 NUT, 1/4-20 Hex, GR5
2 NUT, 1/4-20 Hex, GR5
Position : 14
1 BRACKET, Bell Crank Self-Propelled Models
1 BRACKET, Bell Crank Self-Propelled Models
Position : 15
1 HUB, Blade Drive 25mm I.D.
1 HUB, Blade Drive 25mm I.D.
Position : 15
2 RETAINER, 5/16” Bolt per wheel arm assembly
2 RETAINER, 5/16” Bolt per wheel arm assembly
Position : 15
1 O-RING
1 O-RING
Position : 15
2 PLATE, 46T Gear
2 PLATE, 46T Gear
Position : 15
1 CHUTE, 21” Side P216018KWV
1 CHUTE, 21” Side P216018KWV
Position : 15
1 PLUG, Chute Adapter P216018KWV, P217018BV,
1 PLUG, Chute Adapter P216018KWV, P217018BV,
Position : 15
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 1/2” Short Neck Carriage GR5
Position : 15
1 DECAL, Caution, Symbols
1 DECAL, Caution, Symbols
Position : 15
2 CAP, Vinyl
2 CAP, Vinyl
Position : 15
1 SPACER, .33 x .63 x .156 Self-Propelled Models
1 SPACER, .33 x .63 x .156 Self-Propelled Models
Position : 16
1 KEY, Woodruff #HP-506 Hi-Pro
1 KEY, Woodruff #HP-506 Hi-Pro
Position : 16
1 GRIP, Height Latch per wheel arm assembly
1 GRIP, Height Latch per wheel arm assembly
Position : 16
1 NUT, 3/8-24 Hex Center Lock, GR
1 NUT, 3/8-24 Hex Center Lock, GR
Position : 16
2 WASHER, Thrust, 3/4” I.D.
2 WASHER, Thrust, 3/4” I.D.
Position : 16
2 WASHER, 5/16” Flat
2 WASHER, 5/16” Flat
Position : 16
1 BRACE, Bag Adapter P216018KWV & RP216018KWV
1 BRACE, Bag Adapter P216018KWV & RP216018KWV
Position : 16
3 NUT, 5/16-18 Hex Flange Lock, GR5
3 NUT, 5/16-18 Hex Flange Lock, GR5
Position : 16
1 DECAL, Noise (European)
1 DECAL, Noise (European)
Position : 16
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
2 BOLT, 1/4-20 x 2-1/2” Square Neck Carriage only 1 shown
Position : 16
1 BELL CRANK Self-Propelled Models
1 BELL CRANK Self-Propelled Models
Position : 17
1 SET SCREW, 5/16-18 x 5/16” Hex Socket
1 SET SCREW, 5/16-18 x 5/16” Hex Socket
Position : 17
1 BRACKET, Right Rear Wheel all
1 BRACKET, Right Rear Wheel all
Position : 17
1 HOLDER, Bearing (Outer Half)
1 HOLDER, Bearing (Outer Half)
Position : 17
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5
4 SCREW, #10-32 x 1-1/2” Hex Head Cap GR5
Position : 17
2 WING-NUT, 5/16-18 Nyloc
2 WING-NUT, 5/16-18 Nyloc
Position : 17
1 SCREW, M6 x 1.0 x 30MM Hex Head Cap P216018KWV & RP216018KWV
1 SCREW, M6 x 1.0 x 30MM Hex Head Cap P216018KWV & RP216018KWV
Position : 17
1 CLIP, Wiring
1 CLIP, Wiring
Position : 17
2 DECAL, Warning (Euro)
2 DECAL, Warning (Euro)
Position : 17
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
6 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5 only 1 shown
Position : 17
1 CONTROL PANEL (w/o Ground Drive Slot) 216518B
1 CONTROL PANEL (w/o Ground Drive Slot) 216518B
Position : 18
1 PULLEY, Engine (25mm I. D. x 2-1/8” O.D.)
1 PULLEY, Engine (25mm I. D. x 2-1/8” O.D.)
Position : 18
1 BRACKET, Left Rear Wheel all
1 BRACKET, Left Rear Wheel all
Position : 18
1 WASHER, .28 x .63 x .06 Flat
1 WASHER, .28 x .63 x .06 Flat
Position : 18
1 GASKET, Housing
1 GASKET, Housing
Position : 18
1 COVER, 21” Deck RP217018BV, RP217018BVE,
1 COVER, 21” Deck RP217018BV, RP217018BVE,
Position : 18
1 SLEEVE, .237/.242 I.D. x .3135/.3185 O.D. x .748 not shown; P216018KWV &
1 SLEEVE, .237/.242 I.D. x .3135/.3185 O.D. x .748 not shown; P216018KWV &
Position : 18
1 CHARGER, Battery (120 Volt; 60 Hertz)
1 CHARGER, Battery (120 Volt; 60 Hertz)
Position : 18
1 DECAL, OPEI Walk/Ride
1 DECAL, OPEI Walk/Ride
Position : 18
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
2 BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR5
Position : 18
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx) All
4 SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx) All
Position : 19
6 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap EP217018BV & ERP217018BV
6 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap EP217018BV & ERP217018BV
Position : 19
1 AXLE, 21” qty. 2 on push models; qty. 1 on
1 AXLE, 21” qty. 2 on push models; qty. 1 on
Position : 19
1 COTTER PIN, .06 x .50
1 COTTER PIN, .06 x .50
Position : 19
3 WASHER, 5/16” Internal/External Tooth Lock
3 WASHER, 5/16” Internal/External Tooth Lock
Position : 19
2 NUT, 5/16-18 Hex Large Flange Center Lock
2 NUT, 5/16-18 Hex Large Flange Center Lock
Position : 19
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Position : 19
1 DECAL, Warning
1 DECAL, Warning
Position : 19
6 WASHER, Reinforcing only 1 shown
6 WASHER, Reinforcing only 1 shown
Position : 19
1 WASHER, .33 x .88 x .09 Flat Self-Propelled Models
1 WASHER, .33 x .88 x .09 Flat Self-Propelled Models
Position : 20
1 WELDMENT, Fender European models
1 WELDMENT, Fender European models
Position : 20
1 FOOT GUARD, Long, Rear Push Models only
1 FOOT GUARD, Long, Rear Push Models only
Position : 20
1 BELT, Engine Drive (Stretch)
1 BELT, Engine Drive (Stretch)
Position : 20
1 BRACKET, Differential
1 BRACKET, Differential
Position : 20
2 DECAL, Deck/Chute International Warning
2 DECAL, Deck/Chute International Warning
Position : 20
6 WASHER, 5/16” Split Lock only 1 shown
6 WASHER, 5/16” Split Lock only 1 shown
Position : 20
1 SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5 Self-Propelled Models
1 SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5 Self-Propelled Models
Position : 21
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
2 BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
Position : 21
1 FOOT GUARD, Rear used on Domestic Self-
1 FOOT GUARD, Rear used on Domestic Self-
Position : 21
1 THRUST PLATE, Short
1 THRUST PLATE, Short
Position : 21
4 SCREW, 1/4-20 x 1” Hex Washer Self-Tap
4 SCREW, 1/4-20 x 1” Hex Washer Self-Tap
Position : 21
1 DECAL, OPC Bail (International Symbol)
1 DECAL, OPC Bail (International Symbol)
Position : 21
6 NUT, 5/16-18 Hex, GR5 only 1 shown
6 NUT, 5/16-18 Hex, GR5 only 1 shown
Position : 21
1 TEENUT, 5/16-18 Self-Propelled Models
1 TEENUT, 5/16-18 Self-Propelled Models
Position : 22
1 RETAINER, 5/16” Bolt
1 RETAINER, 5/16” Bolt
Position : 22
1 RING, Split (Black) used on Self-Propelled models
1 RING, Split (Black) used on Self-Propelled models
Position : 22
2 RETAINING RING, .625 External
2 RETAINING RING, .625 External
Position : 22
1 SPACER, Axle Gear
1 SPACER, Axle Gear
Position : 22
1 DECAL, Patent Numbers not shown
1 DECAL, Patent Numbers not shown
Position : 22
2 NUT, 1/2” Push
2 NUT, 1/2” Push
Position : 22
1 BUSHING, Differential, .328 x .625 x .41 Self-Propelled Models
1 BUSHING, Differential, .328 x .625 x .41 Self-Propelled Models
Position : 23
3 NUT, 5/16-18 Hex Flange Lock, GR
3 NUT, 5/16-18 Hex Flange Lock, GR
Position : 23
1 SUPPORT, Foot Guard used on Self-Propelled models
1 SUPPORT, Foot Guard used on Self-Propelled models
Position : 23
1 BALL BEARING- 3/4” Bore
1 BALL BEARING- 3/4” Bore
Position : 23
1 ASSEMBLY, Long Axle
1 ASSEMBLY, Long Axle
Position : 23
4 BEARING, Nyliner
4 BEARING, Nyliner
Position : 23
3 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 All
3 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 All
Position : 24
2 AIR LIFT
2 AIR LIFT
Position : 24
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
1 BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5 used on Self-Propelled models
Position : 24
1 GUIDE, Thrust Plate (3/8-24 thread)
1 GUIDE, Thrust Plate (3/8-24 thread)
Position : 24
4 GEAR, Pinion (12 tooth)
4 GEAR, Pinion (12 tooth)
Position : 24
1 SCREW, 5/16-18 x 1/4” Set
1 SCREW, 5/16-18 x 1/4” Set
Position : 24
2 NUT, 5/16-18 Hex Flange Lock, GR5 All
2 NUT, 5/16-18 Hex Flange Lock, GR5 All
Position : 25
4 WASHER, 5/16” Internal Tooth Lock
4 WASHER, 5/16” Internal Tooth Lock
Position : 25
1 WASHER, 1/4” Internal Tooth Lock
1 WASHER, 1/4” Internal Tooth Lock
Position : 25
1 SHIELD, Hex Shaft European models only
1 SHIELD, Hex Shaft European models only
Position : 25
4 SPACER, Pinion Gear
4 SPACER, Pinion Gear
Position : 25
2 WASHER, 1/2” Flat
2 WASHER, 1/2” Flat
Position : 25
1 NUT, 5/16-18 Hex Center Lock Self-Propelled Models
1 NUT, 5/16-18 Hex Center Lock Self-Propelled Models
Position : 26
4 NUT, 5/16-24 Hex, GR
4 NUT, 5/16-24 Hex, GR
Position : 26
2 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
2 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
Position : 26
1 BALL JOINT, 1/4-28 not shown; see Handles &
1 BALL JOINT, 1/4-28 not shown; see Handles &
Position : 26
4 SHAFT, Pinion
4 SHAFT, Pinion
Position : 26
1 DECAL, Adjustment
1 DECAL, Adjustment
Position : 26
1 LEVER, Shift Self-Propelled Models
1 LEVER, Shift Self-Propelled Models
Position : 27
4 SCREW, 5/16-24 x 21/32” Machine
4 SCREW, 5/16-24 x 21/32” Machine
Position : 27
2 NUT, 1/4-28 Hex not shown; see Handles &
2 NUT, 1/4-28 Hex not shown; see Handles &
Position : 27
4 NUT, #10-32 Hex Nyloc
4 NUT, #10-32 Hex Nyloc
Position : 27
1 DECAL, Thatcherizer
1 DECAL, Thatcherizer
Position : 27
1 NUT, 5/16-24 Hex Center Lock GR5 All
1 NUT, 5/16-24 Hex Center Lock GR5 All
Position : 28
3 SPACER, .06 Thick for blade hub
3 SPACER, .06 Thick for blade hub
Position : 28
1 LINK, Transfer (1/4-28 thread)
1 LINK, Transfer (1/4-28 thread)
Position : 28
1 ASSY, Left Housing (Phantom)
1 ASSY, Left Housing (Phantom)
Position : 28
1 CLIP, Wiring Harness All
1 CLIP, Wiring Harness All
Position : 29
1 COVER, Belt
1 COVER, Belt
Position : 29
1 WASHER, 3/4” Shim
1 WASHER, 3/4” Shim
Position : 29
1 HOUSING, Left
1 HOUSING, Left
Position : 29
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 All
4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 All
Position : 30
3 PLUG, 5/16” Square Hole Push Models
3 PLUG, 5/16” Square Hole Push Models
Position : 30
3 WASHER, 3/8” Internal Tooth Lock
3 WASHER, 3/8” Internal Tooth Lock
Position : 30
3 GASKET, 5/8” O. D.
3 GASKET, 5/8” O. D.
Position : 30
4 KNOB, 5/16-18 Wing (Black) All
4 KNOB, 5/16-18 Wing (Black) All
Position : 31
2 PLUG, 5/16” Round Hole qty. 3 on Push Models
2 PLUG, 5/16” Round Hole qty. 3 on Push Models
Position : 31
1 WASHER, 3/8” Flat
1 WASHER, 3/8” Flat
Position : 31
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 All
2 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 All
Position : 32
1 DECAL, Caution, International Symbols European models
1 DECAL, Caution, International Symbols European models
Position : 32
2 NUT, 3/8-24 Hex
2 NUT, 3/8-24 Hex
Position : 32
3 WASHER, 1/4” Internal Tooth Lock All
3 WASHER, 1/4” Internal Tooth Lock All
Position : 33
1 NUT, 5/16-18 Hex Large Flange Center Lock
1 NUT, 5/16-18 Hex Large Flange Center Lock
Position : 33
1 SPRING, Clutch- 21S
1 SPRING, Clutch- 21S
Position : 33
3 NUT, 1/4-20 Hex All
3 NUT, 1/4-20 Hex All
Position : 34
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
1 SCREW, 1/4-20 x 2” Hex Head Cap, GR
Position : 35
1 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
1 BOLT, 5/16-18 x 1/2”, Short Neck Carriage, GR
Position : 35
2 BUSHING, .27 x .35 x .4 Flange Self-Propelled Models
2 BUSHING, .27 x .35 x .4 Flange Self-Propelled Models
Position : 36
2 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap
2 SCREW, 1/4-20 x 1/2” Hex Flange Self-Tap
Position : 36
1 PIN, 1/4 x 1-1/2” Self-Propelled Models
1 PIN, 1/4 x 1-1/2” Self-Propelled Models
Position : 37
1 COTTER PIN, 3/32 x 1/2”
1 COTTER PIN, 3/32 x 1/2”
Position : 37
1 PUSH-NUT, 1/4” Self-Propelled Models
1 PUSH-NUT, 1/4” Self-Propelled Models
Position : 38
1 BUSHING, Powdered Metal
1 BUSHING, Powdered Metal
Position : 38
2 BALL JOINT, 1/4-28 Self-Propelled Models
2 BALL JOINT, 1/4-28 Self-Propelled Models
Position : 39
1 DISC, Driven (Cantilever)
1 DISC, Driven (Cantilever)
Position : 39
4 NUT, 1/4-28 Hex Self-Propelled Models
4 NUT, 1/4-28 Hex Self-Propelled Models
Position : 40
1 WASHER, 44 x .78 x .025 Curved
1 WASHER, 44 x .78 x .025 Curved
Position : 40
1 FOAM GRIP, 15” long All
1 FOAM GRIP, 15” long All
Position : 41
1 RETAINER, 3/8” Bolt
1 RETAINER, 3/8” Bolt
Position : 41
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 Self-Propelled Models
1 SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 Self-Propelled Models
Position : 42
1 SPRING, Wheel Drive
1 SPRING, Wheel Drive
Position : 42
1 NUT, 3/8-16 Hex Center Lock All
1 NUT, 3/8-16 Hex Center Lock All
Position : 43
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5
Position : 43
4 WASHER, 5/16” Internal Tooth Lock All
4 WASHER, 5/16” Internal Tooth Lock All
Position : 44
8 WASHER, 7/16” Flat Self-Propelled Models
8 WASHER, 7/16” Flat Self-Propelled Models
Position : 45
2 BUSHING, Flange, .381 x .625 x .62
2 BUSHING, Flange, .381 x .625 x .62
Position : 45
2 WASHER, Nylon Self-Propelled Models
2 WASHER, Nylon Self-Propelled Models
Position : 46
1 SPACER, .500 x .65 x 1.75
1 SPACER, .500 x .65 x 1.75
Position : 46
1 ROD, Speed Control (1/4-28 thread) Self-Propelled Models
1 ROD, Speed Control (1/4-28 thread) Self-Propelled Models
Position : 47
1 GUIDE, Rope (1/4-20 thread) All
1 GUIDE, Rope (1/4-20 thread) All
Position : 48
1 WASHER, 5/16” Internal Tooth Lock
1 WASHER, 5/16” Internal Tooth Lock
Position : 48
1 NUT, 1/4-28 Hex GR5 or B All
1 NUT, 1/4-28 Hex GR5 or B All
Position : 49
2 CABLE-TIE, 7” Self-Propelled Models
2 CABLE-TIE, 7” Self-Propelled Models
Position : 50
1 THROTTLE CONTROL, .48 x .61 Briggs models; see also Throttle
1 THROTTLE CONTROL, .48 x .61 Briggs models; see also Throttle
Position : 51
1 THROTTLE KNOB All
1 THROTTLE KNOB All
Position : 52
1 KNOB, Shift Self-Propelled Models
1 KNOB, Shift Self-Propelled Models
Position : 53
1 CLAMP, 7/8” Double Cable Self-Propelled Models
1 CLAMP, 7/8” Double Cable Self-Propelled Models
Position : 54
1 SCREW, #8-32 x 1/2” Cross Recess Filister Head Machine Self-Propelled Models
1 SCREW, #8-32 x 1/2” Cross Recess Filister Head Machine Self-Propelled Models
Position : 55
1 NUT, #8-32 Hex Self-Propelled Models
1 NUT, #8-32 Hex Self-Propelled Models
Position : 56
1 BELT GUIDE, Lower Self-Propelled Models
1 BELT GUIDE, Lower Self-Propelled Models
Position : 57
1 WASHER, Belleville Self-Propelled Models
1 WASHER, Belleville Self-Propelled Models
Position : 58
4 WASHER, 1/4” Internal Tooth Lock Self-Propelled Models
4 WASHER, 1/4” Internal Tooth Lock Self-Propelled Models
Position : 59
1 WASHER, 3/8” Flat Self-Propelled Models
1 WASHER, 3/8” Flat Self-Propelled Models
Position : 60
1 COTTER PIN, 5/16 Self Lock Self-Propelled Models
1 COTTER PIN, 5/16 Self Lock Self-Propelled Models
Position : 61
1 DECAL, Easy Walk All
1 DECAL, Easy Walk All
Position : 62
1 CLAMP, Casing models with Briggs Engine
1 CLAMP, Casing models with Briggs Engine
Position : 63
1 SCREW,#10-32 x 5/8” Self-Tap models with Briggs Engine
1 SCREW,#10-32 x 5/8” Self-Tap models with Briggs Engine
Position : 64
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 All
1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 All
Position : 65