Explosionszeichnung slt 100 Simplicity slt-100

Entdecken Sie die vollständige Explosionszeichnung slt 100 Simplicity slt-100 – ein unverzichtbarer Leitfaden zur Identifizierung aller Ersatzteile. Unsere Darstellung hilft Ihnen, jede Komponente Ihres slt 100 zu verstehen. Finden Sie schnell die benötigten Teile für Ihr slt 100 Simplicity slt-100.

Reparatur-Assistent Powered by ChatGPT

Ersatzteilliste

1 SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. Nos. 2, 3, 4 & 5)
1 SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. Nos. 2, 3, 4 & 5)
Position: 1
1 SEAT, Hi Back, Steel Pan
1 SEAT, Hi Back, Steel Pan
Position: 1
1 ROD, Lift Handle
1 ROD, Lift Handle
Position: 1
8 WASHER, 3/4
8 WASHER, 3/4
Position: 1
4 WASHER, Flat (Use on 22 Gross HP Models only)
4 WASHER, Flat (Use on 22 Gross HP Models only)
Position: 1
1 VALVE, Shut Off Oil Drain
1 VALVE, Shut Off Oil Drain
Position: 2
1 WASHER, 5/8
1 WASHER, 5/8
Position: 2
4 WASHER, Plain, 5/16
4 WASHER, Plain, 5/16
Position: 2
1 GRIP
1 GRIP
Position: 2
2 WHEEL & TIRE ASSEMBLY, Front
2 WHEEL & TIRE ASSEMBLY, Front
Position: 2
1 SEAL, Short
1 SEAL, Short
Position: 3
1 SEAL, Long (Single)
1 SEAL, Long (Single)
Position: 3
1 LOCKWASHER, Internal Tooth, 5/8 (Not used on 2014 & newer models)
1 LOCKWASHER, Internal Tooth, 5/8 (Not used on 2014 & newer models)
Position: 3
1 LATCH, Seat
1 LATCH, Seat
Position: 3
1 CAPSCREW, Hex Head 5/16-18 x 1 G5
1 CAPSCREW, Hex Head 5/16-18 x 1 G5
Position: 3
1 TIRE, Turf 15 X 6.00 - 6 Saver TL
1 TIRE, Turf 15 X 6.00 - 6 Saver TL
Position: 3
1 NUT, Hex, Flange, 5/8-32
1 NUT, Hex, Flange, 5/8-32
Position: 4
4 CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x
4 CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x
Position: 4
1 WASHER, 5/16
1 WASHER, 5/16
Position: 4
1 TUBE, Tire, Front
1 TUBE, Tire, Front
Position: 4
4 CAPSCREW, Hex Washer Head Taptite 5/16-18 x 5/8
4 CAPSCREW, Hex Washer Head Taptite 5/16-18 x 5/8
Position: 5
1 COVER, Ignition
1 COVER, Ignition
Position: 5
4 SPACER, 0.32 ID x 1-1/2 OD
4 SPACER, 0.32 ID x 1-1/2 OD
Position: 5
1 SPRING, Torsion
1 SPRING, Torsion
Position: 5
1 WHEEL & BUSHINGS ASSEMBLY, Front
1 WHEEL & BUSHINGS ASSEMBLY, Front
Position: 5
1 IGNITION KEY (Set of 2)
1 IGNITION KEY (Set of 2)
Position: 6
1 SUPPORT, Seat
1 SUPPORT, Seat
Position: 6
2 VALVE STEM & CAP
2 VALVE STEM & CAP
Position: 6
1 MUFFLER (Twin)
1 MUFFLER (Twin)
Position: 7
1 SWITCH, Headlights, 2 Terminal
1 SWITCH, Headlights, 2 Terminal
Position: 7
2 BOLT, Carriage, 5/16-18 x 3/4
2 BOLT, Carriage, 5/16-18 x 3/4
Position: 7
1 SPACER, Pivot Powdered Metal
1 SPACER, Pivot Powdered Metal
Position: 7
4 BEARING
4 BEARING
Position: 7
1 PLUG, Hole, Square
1 PLUG, Hole, Square
Position: 8
1 PIVOT, Seat
1 PIVOT, Seat
Position: 8
1 NUT, Hex Flange 5/16-18, Whiz Lock Small
1 NUT, Hex Flange 5/16-18, Whiz Lock Small
Position: 8
1 FITTING, Grease, 1/4-28 Thread
1 FITTING, Grease, 1/4-28 Thread
Position: 8
1 PIPE, Exhaust R.H. (Twin)
1 PIPE, Exhaust R.H. (Twin)
Position: 9
1 PLUG, Hour Meter (Kohler and B&S Single)
1 PLUG, Hour Meter (Kohler and B&S Single)
Position: 9
4 BOLT, Carriage, 5/16-18 x 3/4
4 BOLT, Carriage, 5/16-18 x 3/4
Position: 9
4 WASHER, Special Yellow
4 WASHER, Special Yellow
Position: 9
1 PIPE, Exhaust L.H. (Twin)
1 PIPE, Exhaust L.H. (Twin)
Position: 10
1 METER, Hour, LCD (B&S V-Twin Only)
1 METER, Hour, LCD (B&S V-Twin Only)
Position: 10
4 NUT, Hex Flange, ESNA, 5/16-18
4 NUT, Hex Flange, ESNA, 5/16-18
Position: 10
4 RING, Retaining
4 RING, Retaining
Position: 10
4 RING, Retaining (Use on 22 Gross HP Models only)
4 RING, Retaining (Use on 22 Gross HP Models only)
Position: 10
1 WASHER, Plain, 1/4 (6 Total for Export)
1 WASHER, Plain, 1/4 (6 Total for Export)
Position: 11
2 BOLT, Shoulder, 5/16-18 G5
2 BOLT, Shoulder, 5/16-18 G5
Position: 11
4 CAP, Hub
4 CAP, Hub
Position: 11
4 CAP, Hub (Use on 22 Gross HP Models only)
4 CAP, Hub (Use on 22 Gross HP Models only)
Position: 11
1 MUFFLER (Single)
1 MUFFLER (Single)
Position: 12
1 NUT, Hex, ESNA, 1/4-20
1 NUT, Hex, ESNA, 1/4-20
Position: 12
2 SPRING, Compression
2 SPRING, Compression
Position: 12
2 KEY, 3/16 x 3/16 x
2 KEY, 3/16 x 3/16 x
Position: 12
2 KEY, 3/16 x 3/16 x 2 (Use on 22 Gross HP Models only)
2 KEY, 3/16 x 3/16 x 2 (Use on 22 Gross HP Models only)
Position: 12
1 PIPE, Exhaust (Single)
1 PIPE, Exhaust (Single)
Position: 13
1 BOLT, Carriage, 1/4-20 x 7/8
1 BOLT, Carriage, 1/4-20 x 7/8
Position: 13
4 WASHER, Spring Black
4 WASHER, Spring Black
Position: 13
2 WASHER
2 WASHER
Position: 13
4 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 1/2
4 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 1/2
Position: 14
1 NUT, Push On
1 NUT, Push On
Position: 14
2 COVER, Spring
2 COVER, Spring
Position: 14
2 CABLE, Lift w/Pin
2 CABLE, Lift w/Pin
Position: 14
2 CABLE, Lift w/Pin (Used on 46" & 52" Decks only)
2 CABLE, Lift w/Pin (Used on 46" & 52" Decks only)
Position: 14
2 SPACER, 3/4 ID x 1-1/4 OD x 1-5/8
2 SPACER, 3/4 ID x 1-1/4 OD x 1-5/8
Position: 14
1 CLIP, Speed Wire
1 CLIP, Speed Wire
Position: 15
1 HOLD DOWN, Battery
1 HOLD DOWN, Battery
Position: 15
1 POD, LH Cup Holder
1 POD, LH Cup Holder
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 20"
2 WHEEL & TIRE ASSEMBLY, Rear 20"
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 20" (Use on 20 Gross HP Model only)
2 WHEEL & TIRE ASSEMBLY, Rear 20" (Use on 20 Gross HP Model only)
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 22" (Use on Model 2690840)
2 WHEEL & TIRE ASSEMBLY, Rear 22" (Use on Model 2690840)
Position: 15
1 CONTROL, Throttle Double (Single)
1 CONTROL, Throttle Double (Single)
Position: 16
1 CONTROL, Throttle, Choke-A-Matic (Twin)
1 CONTROL, Throttle, Choke-A-Matic (Twin)
Position: 16
1 SWITCH, Push Button (NC)
1 SWITCH, Push Button (NC)
Position: 16
1 ELBOW FITTING
1 ELBOW FITTING
Position: 16
1 ROD, Lift
1 ROD, Lift
Position: 16
1 TIRE, Turf 20 X 8.00 - 8 Saver TL
1 TIRE, Turf 20 X 8.00 - 8 Saver TL
Position: 16
2 TIRE, 20 x 830-8, 2 Ply, K358 (Use 7101560)
2 TIRE, 20 x 830-8, 2 Ply, K358 (Use 7101560)
Position: 16
2 TIRE, 22 x 10.00-8, 2 Ply, K358
2 TIRE, 22 x 10.00-8, 2 Ply, K358
Position: 16
2 CLAMP, Hose
2 CLAMP, Hose
Position: 17
3 TIE, Self Locking 7-5/16
3 TIE, Self Locking 7-5/16
Position: 17
1 BUSHING
1 BUSHING
Position: 17
1 TUBE, Tire, Rear (Use on 20" Tire)
1 TUBE, Tire, Rear (Use on 20" Tire)
Position: 17
2 TUBE, Tire, Rear (Use on 22" Tire)
2 TUBE, Tire, Rear (Use on 22" Tire)
Position: 17
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 55.5 Lg
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 55.5 Lg
Position: 18
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 49.5 Lg Use on engine model number 331777-
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 49.5 Lg Use on engine model number 331777-
Position: 18
1 OUTLET, 12 Volt DC Power
1 OUTLET, 12 Volt DC Power
Position: 18
1 TANK, Fuel
1 TANK, Fuel
Position: 18
1 WHEEL, Hub
1 WHEEL, Hub
Position: 18
2 CLIP, Hose
2 CLIP, Hose
Position: 19
1 PLUG, Hole Models W/O 12V Adapter
1 PLUG, Hole Models W/O 12V Adapter
Position: 19
1 CAP, Gas
1 CAP, Gas
Position: 19
4 WASHER, Flat, 3/4 x 1-1/4 (Use on 22 Gross HP Models only)
4 WASHER, Flat, 3/4 x 1-1/4 (Use on 22 Gross HP Models only)
Position: 19
3 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1 (Single)
3 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1 (Single)
Position: 20
1 SWITCH, Push Button (NO/NC) (18.5 Gross HP & 20 Gross HP Models)
1 SWITCH, Push Button (NO/NC) (18.5 Gross HP & 20 Gross HP Models)
Position: 20
1 SWITCH, Push Button (NO/NC) (22 Gross HP Models)
1 SWITCH, Push Button (NO/NC) (22 Gross HP Models)
Position: 20
1 PAD, Footrest L.H.
1 PAD, Footrest L.H.
Position: 20
1 LOCKWASHER, External Tooth 3/8
1 LOCKWASHER, External Tooth 3/8
Position: 21
4 NUT, Hex, Flange Whizlock, 5/16-18
4 NUT, Hex, Flange Whizlock, 5/16-18
Position: 21
2/4 CLIP, Hair Pin
2/4 CLIP, Hair Pin
Position: 21
1 WASHER, 3/8
1 WASHER, 3/8
Position: 22
4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8
4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8
Position: 22
1 PAD, Footrest R.H.
1 PAD, Footrest R.H.
Position: 22
12 PIN, Clevis
12 PIN, Clevis
Position: 22
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27)
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27)
Position: 23
1 PULLEY & HUB ASSEMBLY, Engine
1 PULLEY & HUB ASSEMBLY, Engine
Position: 24
2 SOCKET ASSEMBLY
2 SOCKET ASSEMBLY
Position: 24
6 CAPSCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/2
6 CAPSCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/2
Position: 24
1 QUADRANT, Lift
1 QUADRANT, Lift
Position: 24
1 TIE, Self Locking
1 TIE, Self Locking
Position: 25
2 BULB, 1141-12V 21CP
2 BULB, 1141-12V 21CP
Position: 25
2 CAPSCREW, Taptite, 5/16-18 x 5/8
2 CAPSCREW, Taptite, 5/16-18 x 5/8
Position: 25
1 DECAL, Mower Transport Lift
1 DECAL, Mower Transport Lift
Position: 25
1 RETAINER, Clutch
1 RETAINER, Clutch
Position: 26
1 REFLECTOR, Headlight
1 REFLECTOR, Headlight
Position: 26
1 POD, RH Lift Quadrant
1 POD, RH Lift Quadrant
Position: 26
1 CARRIAGE BOLT, 1/4-20 x 5/8 G5
1 CARRIAGE BOLT, 1/4-20 x 5/8 G5
Position: 26
1 LENS, Headlight
1 LENS, Headlight
Position: 27
1 GRIP, Lift
1 GRIP, Lift
Position: 27
1 NUT, Hex Flange 1/4-20 Whiz Lock Large
1 NUT, Hex Flange 1/4-20 Whiz Lock Large
Position: 27
1 CLUTCH, Electric OGURA (Used on Model Year 2008 and Prior)
1 CLUTCH, Electric OGURA (Used on Model Year 2008 and Prior)
Position: 28
1 CLUTCH, Electric OGURA (Used on Model Year 2009 and Later)
1 CLUTCH, Electric OGURA (Used on Model Year 2009 and Later)
Position: 28
1 CLIP, Speed Wire (18.5 Gross HP & 20 Gross HP Models)
1 CLIP, Speed Wire (18.5 Gross HP & 20 Gross HP Models)
Position: 28
1 CLIP, Speed Wire (22 Gross HP Models)
1 CLIP, Speed Wire (22 Gross HP Models)
Position: 28
1 WASHER, Hex
1 WASHER, Hex
Position: 29
1 NUT, Hex, Flange, 1/4-20
1 NUT, Hex, Flange, 1/4-20
Position: 29
1 LOCKWASHER, Spring
1 LOCKWASHER, Spring
Position: 30
1 CAPSCREW, Hex Head 7/16-20 x 3-1/2 G5
1 CAPSCREW, Hex Head 7/16-20 x 3-1/2 G5
Position: 31
1 HARNESS, Wiring (Use with Clutch 1731275SM)
1 HARNESS, Wiring (Use with Clutch 1731275SM)
Position: 31
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models with 12 Volt Adapter)
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models with 12 Volt Adapter)
Position: 31
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models without 12 Volt
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models without 12 Volt
Position: 31
1/2 WASHER, 3/8
1/2 WASHER, 3/8
Position: 31
1 GASKET, Exhaust
1 GASKET, Exhaust
Position: 32
1 CABLE, Solenoid to Starter
1 CABLE, Solenoid to Starter
Position: 32
4/1 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4
4/1 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4
Position: 33
1 SOLENOID
1 SOLENOID
Position: 33
1/2 WASHER, 5/16
1/2 WASHER, 5/16
Position: 33
2 CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G8
2 CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G8
Position: 34
2 SCREW, Taptite, 1/4-20 x 1/2
2 SCREW, Taptite, 1/4-20 x 1/2
Position: 34
2 LOCKWASHER, Spring 5/16
2 LOCKWASHER, Spring 5/16
Position: 35
2 LOCKWASHER, External Tooth, 5/16
2 LOCKWASHER, External Tooth, 5/16
Position: 35
2 NUT, Hex, 5/16-24 NF
2 NUT, Hex, 5/16-24 NF
Position: 36
2 PIVOT, Hood
2 PIVOT, Hood
Position: 37
1 CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid
1 CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid
Position: 37
2 BOLT, Carriage, 5/16-18 x
2 BOLT, Carriage, 5/16-18 x
Position: 38
2 NUT, Hex, Flange Whizlock, 5/16-18
2 NUT, Hex, Flange Whizlock, 5/16-18
Position: 38
2 NUT, Hex Flange, 5/16-18
2 NUT, Hex Flange, 5/16-18
Position: 39
1 SUPPORT, RMO Switch
1 SUPPORT, RMO Switch
Position: 39
2 BOLT, Carriage, 5/16-18 x 3/4
2 BOLT, Carriage, 5/16-18 x 3/4
Position: 40
1 BOOT, Insulator
1 BOOT, Insulator
Position: 41
1 BATTERY, 12 Volt, 230 CCA
1 BATTERY, 12 Volt, 230 CCA
Position: 42
1 SWITCH, Push Button (NO), Reverse Pedal
1 SWITCH, Push Button (NO), Reverse Pedal
Position: 43
2 NUT, Hex, Full, 1/4-20
2 NUT, Hex, Full, 1/4-20
Position: 44
2 LOCKWASHER, 1/4
2 LOCKWASHER, 1/4
Position: 45
2 WASHER, 1/4 I.D.
2 WASHER, 1/4 I.D.
Position: 46
1 CABLE, Battery to Ground
1 CABLE, Battery to Ground
Position: 47
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position: 48
1 FUSE, Wiring Harness
1 FUSE, Wiring Harness
Position: 49
1 SWITCH, RMO Module Only
1 SWITCH, RMO Module Only
Position: 50
2 KEY, RMO Module, Plastic
2 KEY, RMO Module, Plastic
Position: 51
1 SWITCH, PTO, Push/Pull Symbols
1 SWITCH, PTO, Push/Pull Symbols
Position: 52
1 WIRING ASSEMBLY, All Conditions Shutdown (CE/Export)
1 WIRING ASSEMBLY, All Conditions Shutdown (CE/Export)
Position: 53