Exploded view slt 100 Simplicity slt-100

Discover the complete exploded view slt 100 Simplicity slt-100, an essential guide to easily identify all spare parts of your appliance. Whether you are looking for a specific part or need help with the repair, our detailed presentation helps you understand each component of your slt 100. Quickly find the parts you need to extend the life of your slt 100 Simplicity slt-100 and avoid unexpected breakdowns.

Repair Assistant Powered by ChatGPT

Spare Parts List

1 SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. Nos. 2, 3, 4 & 5)
1 SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. Nos. 2, 3, 4 & 5)
Position: 1
1 SEAT, Hi Back, Steel Pan
1 SEAT, Hi Back, Steel Pan
Position: 1
1 ROD, Lift Handle
1 ROD, Lift Handle
Position: 1
8 WASHER, 3/4
8 WASHER, 3/4
Position: 1
4 WASHER, Flat (Use on 22 Gross HP Models only)
4 WASHER, Flat (Use on 22 Gross HP Models only)
Position: 1
1 VALVE, Shut Off Oil Drain
1 VALVE, Shut Off Oil Drain
Position: 2
1 WASHER, 5/8
1 WASHER, 5/8
Position: 2
4 WASHER, Plain, 5/16
4 WASHER, Plain, 5/16
Position: 2
1 GRIP
1 GRIP
Position: 2
2 WHEEL & TIRE ASSEMBLY, Front
2 WHEEL & TIRE ASSEMBLY, Front
Position: 2
1 SEAL, Short
1 SEAL, Short
Position: 3
1 SEAL, Long (Single)
1 SEAL, Long (Single)
Position: 3
1 LOCKWASHER, Internal Tooth, 5/8 (Not used on 2014 & newer models)
1 LOCKWASHER, Internal Tooth, 5/8 (Not used on 2014 & newer models)
Position: 3
1 LATCH, Seat
1 LATCH, Seat
Position: 3
1 CAPSCREW, Hex Head 5/16-18 x 1 G5
1 CAPSCREW, Hex Head 5/16-18 x 1 G5
Position: 3
1 TIRE, Turf 15 X 6.00 - 6 Saver TL
1 TIRE, Turf 15 X 6.00 - 6 Saver TL
Position: 3
1 NUT, Hex, Flange, 5/8-32
1 NUT, Hex, Flange, 5/8-32
Position: 4
4 CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x
4 CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x
Position: 4
1 WASHER, 5/16
1 WASHER, 5/16
Position: 4
1 TUBE, Tire, Front
1 TUBE, Tire, Front
Position: 4
4 CAPSCREW, Hex Washer Head Taptite 5/16-18 x 5/8
4 CAPSCREW, Hex Washer Head Taptite 5/16-18 x 5/8
Position: 5
1 COVER, Ignition
1 COVER, Ignition
Position: 5
4 SPACER, 0.32 ID x 1-1/2 OD
4 SPACER, 0.32 ID x 1-1/2 OD
Position: 5
1 SPRING, Torsion
1 SPRING, Torsion
Position: 5
1 WHEEL & BUSHINGS ASSEMBLY, Front
1 WHEEL & BUSHINGS ASSEMBLY, Front
Position: 5
1 IGNITION KEY (Set of 2)
1 IGNITION KEY (Set of 2)
Position: 6
1 SUPPORT, Seat
1 SUPPORT, Seat
Position: 6
2 VALVE STEM & CAP
2 VALVE STEM & CAP
Position: 6
1 MUFFLER (Twin)
1 MUFFLER (Twin)
Position: 7
1 SWITCH, Headlights, 2 Terminal
1 SWITCH, Headlights, 2 Terminal
Position: 7
2 BOLT, Carriage, 5/16-18 x 3/4
2 BOLT, Carriage, 5/16-18 x 3/4
Position: 7
1 SPACER, Pivot Powdered Metal
1 SPACER, Pivot Powdered Metal
Position: 7
4 BEARING
4 BEARING
Position: 7
1 PLUG, Hole, Square
1 PLUG, Hole, Square
Position: 8
1 PIVOT, Seat
1 PIVOT, Seat
Position: 8
1 NUT, Hex Flange 5/16-18, Whiz Lock Small
1 NUT, Hex Flange 5/16-18, Whiz Lock Small
Position: 8
1 FITTING, Grease, 1/4-28 Thread
1 FITTING, Grease, 1/4-28 Thread
Position: 8
1 PIPE, Exhaust R.H. (Twin)
1 PIPE, Exhaust R.H. (Twin)
Position: 9
1 PLUG, Hour Meter (Kohler and B&S Single)
1 PLUG, Hour Meter (Kohler and B&S Single)
Position: 9
4 BOLT, Carriage, 5/16-18 x 3/4
4 BOLT, Carriage, 5/16-18 x 3/4
Position: 9
4 WASHER, Special Yellow
4 WASHER, Special Yellow
Position: 9
1 PIPE, Exhaust L.H. (Twin)
1 PIPE, Exhaust L.H. (Twin)
Position: 10
1 METER, Hour, LCD (B&S V-Twin Only)
1 METER, Hour, LCD (B&S V-Twin Only)
Position: 10
4 NUT, Hex Flange, ESNA, 5/16-18
4 NUT, Hex Flange, ESNA, 5/16-18
Position: 10
4 RING, Retaining
4 RING, Retaining
Position: 10
4 RING, Retaining (Use on 22 Gross HP Models only)
4 RING, Retaining (Use on 22 Gross HP Models only)
Position: 10
1 WASHER, Plain, 1/4 (6 Total for Export)
1 WASHER, Plain, 1/4 (6 Total for Export)
Position: 11
2 BOLT, Shoulder, 5/16-18 G5
2 BOLT, Shoulder, 5/16-18 G5
Position: 11
4 CAP, Hub
4 CAP, Hub
Position: 11
4 CAP, Hub (Use on 22 Gross HP Models only)
4 CAP, Hub (Use on 22 Gross HP Models only)
Position: 11
1 MUFFLER (Single)
1 MUFFLER (Single)
Position: 12
1 NUT, Hex, ESNA, 1/4-20
1 NUT, Hex, ESNA, 1/4-20
Position: 12
2 SPRING, Compression
2 SPRING, Compression
Position: 12
2 KEY, 3/16 x 3/16 x
2 KEY, 3/16 x 3/16 x
Position: 12
2 KEY, 3/16 x 3/16 x 2 (Use on 22 Gross HP Models only)
2 KEY, 3/16 x 3/16 x 2 (Use on 22 Gross HP Models only)
Position: 12
1 PIPE, Exhaust (Single)
1 PIPE, Exhaust (Single)
Position: 13
1 BOLT, Carriage, 1/4-20 x 7/8
1 BOLT, Carriage, 1/4-20 x 7/8
Position: 13
4 WASHER, Spring Black
4 WASHER, Spring Black
Position: 13
2 WASHER
2 WASHER
Position: 13
4 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 1/2
4 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 1/2
Position: 14
1 NUT, Push On
1 NUT, Push On
Position: 14
2 COVER, Spring
2 COVER, Spring
Position: 14
2 CABLE, Lift w/Pin
2 CABLE, Lift w/Pin
Position: 14
2 CABLE, Lift w/Pin (Used on 46" & 52" Decks only)
2 CABLE, Lift w/Pin (Used on 46" & 52" Decks only)
Position: 14
2 SPACER, 3/4 ID x 1-1/4 OD x 1-5/8
2 SPACER, 3/4 ID x 1-1/4 OD x 1-5/8
Position: 14
1 CLIP, Speed Wire
1 CLIP, Speed Wire
Position: 15
1 HOLD DOWN, Battery
1 HOLD DOWN, Battery
Position: 15
1 POD, LH Cup Holder
1 POD, LH Cup Holder
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 20"
2 WHEEL & TIRE ASSEMBLY, Rear 20"
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 20" (Use on 20 Gross HP Model only)
2 WHEEL & TIRE ASSEMBLY, Rear 20" (Use on 20 Gross HP Model only)
Position: 15
2 WHEEL & TIRE ASSEMBLY, Rear 22" (Use on Model 2690840)
2 WHEEL & TIRE ASSEMBLY, Rear 22" (Use on Model 2690840)
Position: 15
1 CONTROL, Throttle Double (Single)
1 CONTROL, Throttle Double (Single)
Position: 16
1 CONTROL, Throttle, Choke-A-Matic (Twin)
1 CONTROL, Throttle, Choke-A-Matic (Twin)
Position: 16
1 SWITCH, Push Button (NC)
1 SWITCH, Push Button (NC)
Position: 16
1 ELBOW FITTING
1 ELBOW FITTING
Position: 16
1 ROD, Lift
1 ROD, Lift
Position: 16
1 TIRE, Turf 20 X 8.00 - 8 Saver TL
1 TIRE, Turf 20 X 8.00 - 8 Saver TL
Position: 16
2 TIRE, 20 x 830-8, 2 Ply, K358 (Use 7101560)
2 TIRE, 20 x 830-8, 2 Ply, K358 (Use 7101560)
Position: 16
2 TIRE, 22 x 10.00-8, 2 Ply, K358
2 TIRE, 22 x 10.00-8, 2 Ply, K358
Position: 16
2 CLAMP, Hose
2 CLAMP, Hose
Position: 17
3 TIE, Self Locking 7-5/16
3 TIE, Self Locking 7-5/16
Position: 17
1 BUSHING
1 BUSHING
Position: 17
1 TUBE, Tire, Rear (Use on 20" Tire)
1 TUBE, Tire, Rear (Use on 20" Tire)
Position: 17
2 TUBE, Tire, Rear (Use on 22" Tire)
2 TUBE, Tire, Rear (Use on 22" Tire)
Position: 17
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 55.5 Lg
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 55.5 Lg
Position: 18
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 49.5 Lg Use on engine model number 331777-
1 HOSE, Fuel, Low Perm, 1/4ID x 1/2OD x 49.5 Lg Use on engine model number 331777-
Position: 18
1 OUTLET, 12 Volt DC Power
1 OUTLET, 12 Volt DC Power
Position: 18
1 TANK, Fuel
1 TANK, Fuel
Position: 18
1 WHEEL, Hub
1 WHEEL, Hub
Position: 18
2 CLIP, Hose
2 CLIP, Hose
Position: 19
1 PLUG, Hole Models W/O 12V Adapter
1 PLUG, Hole Models W/O 12V Adapter
Position: 19
1 CAP, Gas
1 CAP, Gas
Position: 19
4 WASHER, Flat, 3/4 x 1-1/4 (Use on 22 Gross HP Models only)
4 WASHER, Flat, 3/4 x 1-1/4 (Use on 22 Gross HP Models only)
Position: 19
3 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1 (Single)
3 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1 (Single)
Position: 20
1 SWITCH, Push Button (NO/NC) (18.5 Gross HP & 20 Gross HP Models)
1 SWITCH, Push Button (NO/NC) (18.5 Gross HP & 20 Gross HP Models)
Position: 20
1 SWITCH, Push Button (NO/NC) (22 Gross HP Models)
1 SWITCH, Push Button (NO/NC) (22 Gross HP Models)
Position: 20
1 PAD, Footrest L.H.
1 PAD, Footrest L.H.
Position: 20
1 LOCKWASHER, External Tooth 3/8
1 LOCKWASHER, External Tooth 3/8
Position: 21
4 NUT, Hex, Flange Whizlock, 5/16-18
4 NUT, Hex, Flange Whizlock, 5/16-18
Position: 21
2/4 CLIP, Hair Pin
2/4 CLIP, Hair Pin
Position: 21
1 WASHER, 3/8
1 WASHER, 3/8
Position: 22
4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8
4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8
Position: 22
1 PAD, Footrest R.H.
1 PAD, Footrest R.H.
Position: 22
12 PIN, Clevis
12 PIN, Clevis
Position: 22
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27)
1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27)
Position: 23
1 PULLEY & HUB ASSEMBLY, Engine
1 PULLEY & HUB ASSEMBLY, Engine
Position: 24
2 SOCKET ASSEMBLY
2 SOCKET ASSEMBLY
Position: 24
6 CAPSCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/2
6 CAPSCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/2
Position: 24
1 QUADRANT, Lift
1 QUADRANT, Lift
Position: 24
1 TIE, Self Locking
1 TIE, Self Locking
Position: 25
2 BULB, 1141-12V 21CP
2 BULB, 1141-12V 21CP
Position: 25
2 CAPSCREW, Taptite, 5/16-18 x 5/8
2 CAPSCREW, Taptite, 5/16-18 x 5/8
Position: 25
1 DECAL, Mower Transport Lift
1 DECAL, Mower Transport Lift
Position: 25
1 RETAINER, Clutch
1 RETAINER, Clutch
Position: 26
1 REFLECTOR, Headlight
1 REFLECTOR, Headlight
Position: 26
1 POD, RH Lift Quadrant
1 POD, RH Lift Quadrant
Position: 26
1 CARRIAGE BOLT, 1/4-20 x 5/8 G5
1 CARRIAGE BOLT, 1/4-20 x 5/8 G5
Position: 26
1 LENS, Headlight
1 LENS, Headlight
Position: 27
1 GRIP, Lift
1 GRIP, Lift
Position: 27
1 NUT, Hex Flange 1/4-20 Whiz Lock Large
1 NUT, Hex Flange 1/4-20 Whiz Lock Large
Position: 27
1 CLUTCH, Electric OGURA (Used on Model Year 2008 and Prior)
1 CLUTCH, Electric OGURA (Used on Model Year 2008 and Prior)
Position: 28
1 CLUTCH, Electric OGURA (Used on Model Year 2009 and Later)
1 CLUTCH, Electric OGURA (Used on Model Year 2009 and Later)
Position: 28
1 CLIP, Speed Wire (18.5 Gross HP & 20 Gross HP Models)
1 CLIP, Speed Wire (18.5 Gross HP & 20 Gross HP Models)
Position: 28
1 CLIP, Speed Wire (22 Gross HP Models)
1 CLIP, Speed Wire (22 Gross HP Models)
Position: 28
1 WASHER, Hex
1 WASHER, Hex
Position: 29
1 NUT, Hex, Flange, 1/4-20
1 NUT, Hex, Flange, 1/4-20
Position: 29
1 LOCKWASHER, Spring
1 LOCKWASHER, Spring
Position: 30
1 CAPSCREW, Hex Head 7/16-20 x 3-1/2 G5
1 CAPSCREW, Hex Head 7/16-20 x 3-1/2 G5
Position: 31
1 HARNESS, Wiring (Use with Clutch 1731275SM)
1 HARNESS, Wiring (Use with Clutch 1731275SM)
Position: 31
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models with 12 Volt Adapter)
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models with 12 Volt Adapter)
Position: 31
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models without 12 Volt
1 HARNESS, Wiring (Use With Clutch 1736105SM) (Used on models without 12 Volt
Position: 31
1/2 WASHER, 3/8
1/2 WASHER, 3/8
Position: 31
1 GASKET, Exhaust
1 GASKET, Exhaust
Position: 32
1 CABLE, Solenoid to Starter
1 CABLE, Solenoid to Starter
Position: 32
4/1 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4
4/1 CAPSCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4
Position: 33
1 SOLENOID
1 SOLENOID
Position: 33
1/2 WASHER, 5/16
1/2 WASHER, 5/16
Position: 33
2 CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G8
2 CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G8
Position: 34
2 SCREW, Taptite, 1/4-20 x 1/2
2 SCREW, Taptite, 1/4-20 x 1/2
Position: 34
2 LOCKWASHER, Spring 5/16
2 LOCKWASHER, Spring 5/16
Position: 35
2 LOCKWASHER, External Tooth, 5/16
2 LOCKWASHER, External Tooth, 5/16
Position: 35
2 NUT, Hex, 5/16-24 NF
2 NUT, Hex, 5/16-24 NF
Position: 36
2 PIVOT, Hood
2 PIVOT, Hood
Position: 37
1 CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid
1 CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid
Position: 37
2 BOLT, Carriage, 5/16-18 x
2 BOLT, Carriage, 5/16-18 x
Position: 38
2 NUT, Hex, Flange Whizlock, 5/16-18
2 NUT, Hex, Flange Whizlock, 5/16-18
Position: 38
2 NUT, Hex Flange, 5/16-18
2 NUT, Hex Flange, 5/16-18
Position: 39
1 SUPPORT, RMO Switch
1 SUPPORT, RMO Switch
Position: 39
2 BOLT, Carriage, 5/16-18 x 3/4
2 BOLT, Carriage, 5/16-18 x 3/4
Position: 40
1 BOOT, Insulator
1 BOOT, Insulator
Position: 41
1 BATTERY, 12 Volt, 230 CCA
1 BATTERY, 12 Volt, 230 CCA
Position: 42
1 SWITCH, Push Button (NO), Reverse Pedal
1 SWITCH, Push Button (NO), Reverse Pedal
Position: 43
2 NUT, Hex, Full, 1/4-20
2 NUT, Hex, Full, 1/4-20
Position: 44
2 LOCKWASHER, 1/4
2 LOCKWASHER, 1/4
Position: 45
2 WASHER, 1/4 I.D.
2 WASHER, 1/4 I.D.
Position: 46
1 CABLE, Battery to Ground
1 CABLE, Battery to Ground
Position: 47
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
2 CAPSCREW, Hex Head, 1/4-20 x 3/4
Position: 48
1 FUSE, Wiring Harness
1 FUSE, Wiring Harness
Position: 49
1 SWITCH, RMO Module Only
1 SWITCH, RMO Module Only
Position: 50
2 KEY, RMO Module, Plastic
2 KEY, RMO Module, Plastic
Position: 51
1 SWITCH, PTO, Push/Pull Symbols
1 SWITCH, PTO, Push/Pull Symbols
Position: 52
1 WIRING ASSEMBLY, All Conditions Shutdown (CE/Export)
1 WIRING ASSEMBLY, All Conditions Shutdown (CE/Export)
Position: 53